PART 4EU Regulations
CHAPTER 2Other EU Regulations
Commission Regulation (EU) 2017/2400: Annexes83
1
The Annexes to Commission Regulation (EU) 2017/2400 are amended as follows.
2
In Annex II (requirements and procedures: operation of simulation tool)—
a
in point 1.1.3, omit the words from “consulting” to “as well as”;
b
in Appendix 2—
i
after “Regulation (EU) 2017/2400” insert “both as they have effect in domestic law”
;
ii
in Section II, omit point 2.
3
In Annex III (input information: characteristics of the vehicle), in the second subparagraph of point 4.1, for “Annex IV and Annex XI to Directive 2007/46/EC” substitute “Annex II to Regulation (EU) 2018/858”
.
4
In Annex V (verifying engine data)—
a
in appendix 4, in point 7.4, for “EC” substitute “GB”
;
b
in appendix 6—
i
for point 1.3, substitute—
1.3
The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.
ii
in point 1.4, for “Annex VII to Directive 2007/46/EC” substitute “point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683”
;
iii
in point 1.4.1—
aa
for the image, substitute—
bb
in the words following the image, omit “in Poland (e20),”;
iv
in point 1.5.1—
aa
for the image, substitute—
bb
in the words following the image, omit “in Poland (e20),”;
v
in point 2.1, in the example certification number, at the beginning, for “eX” substitute “g11”
;
vi
in the table following point 2.1, in the column headed “Section 3” for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”
.
5
In Annex VI (verifying transmission, torque convertor and other data)—
a
in point 3.4.7, for “an approval” substitute “the approval”
;
b
in point 8, for “an approval” substitute “the approval”
;
c
in Appendix 1, in the second paragraph, omit “Regulation (EC) No XXXXX and”;
d
in Appendices 2, 3, 4 and 5, in point 0.8 in each case, for “EC approval” substitute “GB approval”
;
e
in Appendix 7—
i
for point 1.3, substitute—
1.3
The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.
ii
in point 1.4, for “Annex VII to Directive 2007/46/EC” substitute “point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683”
;
iii
in point 1.5—
aa
for the image, substitute—
bb
in the words following the image, omit “in Poland (e20),”;
iv
in point 2.1, in the example certification number, at the beginning, for “eX” substitute “g11”
;
v
in the table following point 2.1, in the column headed “Section 3”, for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”
.
6
In Annex VII (verifying axle data)—
i
in point 5.1, for “Article 12 of Directive 2007/46/EC” substitute “Article 31 of Regulation (EU) 2018/858”
;
b
in Appendix 1—
i
in the opening section—
aa
after “2017/2400” the first time it appears, insert “as it has effect in domestic law, as last amended by S.I. …./….”
;
bb
omit the following words “Commission Regulation (EU) 2017/2400 as last amended by …”;
ii
in Section I, in point 0.5, for “EC” substitute “GB”
;
c
in Appendix 5—
i
for point 1.3, substitute—
1.3
The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.
ii
in point 1.4, for “Annex VII to Directive 2007/46/EC” substitute “point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683”
;
iii
in point 1.4.1—
aa
for the image, substitute—
bb
in the words following the image, omit “in Poland (e20),”;
iv
in point 2.1, in the example certification number, at the beginning, for “eX” substitute “g11”
;
v
in the table following point 2.1, in the column headed “Section 3”, for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”
.
7
In Annex VIII (verifying air drag data)—
a
in point 2(12), for the definition ‘EMS’ substitute “‘EMS’ means the European Modular System, denoting a vehicle combination consisting of a vehicle of category N, towing both a semi-trailer and either a trailer or a dolly, whether or not coupled together in that order”
;
b
in Appendix 1—
i
in the opening section—
aa
after “2017/2400” the first time it appears, insert “as last amended by S.I. …./….”
;
bb
omit the following words “Commission Regulation (EU) 2017/2400 as last amended by …”;
ii
in Section I, in point 0.6, for “EC” substitute “GB”
;
c
in Appendix 4—
i
in tables 11 and 13, in the second row (width), omit “(96/53/EC)”;
ii
in table 15—
aa
omit “(96/53/EC)” each time it occurs;
bb
in the eighth row (front overhang), and the tenth row (corner front/side panel), omit “, 96/53/EC”;
d
in Appendix 8—
i
for point 1.3, substitute—
1.3
The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.
ii
in point 1.4, for “Annex VII to Directive 2007/46/EC” substitute “point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683”
;
iii
in point 1.4.1—
aa
for the image, substitute—
bb
in the words following the image, omit “in Poland (e20),”;
iv
in point 2.1, in the example certification number, at the beginning, for “eX” substitute “g11”
;
v
in the table following point 2.1, in the column headed “Section 3”, for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”
.
8
In Annex X (certification procedure for pneumatic tyres)—
a
in point 3.3—
i
in the opening words, for “Article 41 of Directive 2007/46/EC” substitute “Article 68 of Regulation (EU) 2018/858”
;
ii
in point (i), for “an approval” substitute “the approval”
;
iii
in point (ii), for “Directive 2007/46/EC, Article 41” substitute “Article 68(1)(a) of Regulation (EU) 2018/858,”
;
b
in point 3.4.4, for “Article 19(2) of Directive 2007/46/EC” substitute “Article 38 of Regulation (EU) 2018/858”
;
c
in Appendix 1, in the opening words, for “as amended by Commission Regulation (EU) 2019/318” substitute “as last amended by S.I. …. / ….”
;
d
in Appendix 4—
i
in point 1.1, in the example certification number, at the beginning, for “eX” substitute “g11”
;
ii
in the table following point 1.1, in the column headed “Section 3”, for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”
.
9
In Annex Xa (conformity of simulation tool operation and of CO2 emissions and fuel consumption related properties etc)—
a
in paragraph 3(f), after “manufacturer” insert “in Great Britain”
;
b
in the table following paragraph 3(f), for the heading to the second column, substitute
c
“Verification testing procedure relevant vehicles sold in GB/year”.