Requirement 5
SCHEDULE 11E+W+SDESIGN PARAMETERS
1. Maximum parameters for buildings and structures are set out at table 6.E+W+S
2. The finished ground level in respect of Work No. 1A, Work No. 1C and Work No. 1E may be higher than 2.8 metres above ordinance datum (AOD) but in all cases the maximum heights measured AOD shall not exceed the measurement in column 5 of table 6.E+W+S
3. Maximum parameters of the A18 Gatehouse building (Work No. 8B) are set out in table 7.E+W+S
4. Maximum parameters for length (m), width (m) or diameter (m) exclude external support structures such as (but not limited to) ladders, platforms, external piping and structural supports.E+W+S
Table 6
(1)
Component
| (2)
Length (m)
| (3)
Width (m) or diameter (m)
| (4)
Height (m) above ground level (AGL) (in the case that the finished ground level is 2.8m AOD)
| (5)
Height (M) AOD (in all cases)
|
---|
Gas Turbine Hall (Work No. 1A) | 22 | 50 | 31.8 | 34.6 |
Steam Turbine Hall (Work No. 1A) | 50 | 40 | 34.8 | 37.6 |
HRSG Building (Work No. 1A) | 28 | 50 | 55.8 | 58.6 |
Absorber (Work No. 1C) (in the case that a single absorber is developed) | 16 (Note 4) | 43 (Note 4) | 98.8 | 101.6 |
Absorber Stack (Work No. 1C) (in the case that a single absorber is developed) | - | 6.7 | 104.8 | 107.6 |
Twin Absorbers (Work No. 1C) (in the case that two absorbers are developed) | - | 19.0 (Note 4) | 80 | 82.8 |
Twin Absorber Stacks (Work No. 1C) (in the case that two absorbers are developed) | - | 6.7 | 95.5 | 98.3 |
HRSG Stack (Work No. 1A) | - | 8.0 | 84.8 | 87.6 |
Carbon Dioxide stripper (Work No. 1C) | - | 15.0 (Note 4) | 63 | 65.8 |
| | | | |
Table 7
(1)
Component
| (2)
Length (m)
| (3)
Width (m)
| (4)
Height (m) above ground level (AGL)
| (5)
Height (m) AOD
|
---|
A18 Gatehouse (Work No. 8B) | 6 | 7 | 4 | 5.5 |