- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Wireless Telegraphy (Mobile Repeater) (Exemption) Regulations 2022, Cross Heading: Additional terms, provisions and limitations for multi-operator mobile repeater devices.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
F113. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F1Reg. 13 omitted (29.2.2024) by virtue of The Wireless Telegraphy (Mobile Repeater) (Exemption) (Amendment) Regulations 2024 (S.I. 2024/136), regs. 1, 2(4)
14.—(1) Where the mobile repeater device does not serve an active connection between a mobile device and a mobile network for five minutes or more, it must ensure that any transmissions it makes using the uplink frequencies comply with the limit in paragraph (2).
(2) The transmissions, when measured in any direction, must have an uplink noise power which does not exceed -70 dBm/MHz e.i.r.p.
Commencement Information
I1Reg. 14 in force at 16.6.2022, see reg. 1
15.—(1) The mobile repeater device may only emit transmissions on uplink frequencies in a particular frequency band which, when measured in any direction, have a power spectral density no greater than 17 dBm/5 MHz.
(2) The mobile repeater device may only emit transmissions on downlink frequencies in a particular frequency band which, when measured in any direction, have a power spectral density no greater than 10 dBm/5 MHz.
Commencement Information
I2Reg. 15 in force at 16.6.2022, see reg. 1
16.—(1) When measured separately for each of the frequency bands being transmitted—
(a)the uplink and downlink system gain must not exceed whichever is the smaller of—
(i)100 dB; and
(ii)10 dB – RSSI; and
(b)the uplink and downlink system gain must be equal.
(2) In this regulation, “RSSI” means received signal strength indicator, which is the total downlink signal power received at the donor port of the mobile repeater device, for all base stations in the frequency band being transmitted (and which shall be measured in dBm).
Commencement Information
I3Reg. 16 in force at 16.6.2022, see reg. 1
17.—(1) For each frequency band that is being transmitted by the mobile repeater device, the power level of transmitted intermodulation products due to input signals within that frequency band shall not exceed −19dBm at the donor port and coverage port of that device.
(2) In this regulation, “transmitted intermodulation products” due to input signals within a frequency band means any signals transmitted by the mobile repeater device within that frequency band which have been created from the non-linear combination of two or more input signals within that frequency band.
Commencement Information
I4Reg. 17 in force at 16.6.2022, see reg. 1
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: