PART 5Qualifying actions
CHAPTER 3In-fill measures
In-fill measures in flatsI122
1
A measure is a “flat in-fill measure” and meets the condition in this article if—
a
it is installed at a domestic premises which is a flat;
b
it is one of the following measures—
i
solid wall insulation;
ii
insulation of a cavity wall;
iii
a district heating connection;
c
it is linked with one other measure (“the primary measure”) which is—
i
the same kind of measure as the flat in-fill measure;
ii
promoted by the same participant that promoted the flat in-fill measure; and
iii
installed at separate domestic premises in the same block of flats (that is, a building which contains two or more flats) as the flat in-fill measure; and
2
For the purposes of paragraph (1)(c)—
a
a flat in-fill measure is linked with a primary measure if—
i
the flat in-fill measure is completed during the three month period beginning with the day on which the primary measure is completed;
ii
the flat in-fill measure is notified under article 43 on the same day as, or after, the notification of the primary measure under that article;
iii
when notifying the flat in-fill measure under article 43, the participant includes information sufficient to enable the Administrator to identify the primary measure with which it is to be linked; and
iv
the ECO4 project containing the primary measure does not include any primary measure that is already linked with another in-fill measure;
b
a primary measure is the same kind of measure as a flat in-fill measure if—
i
both are solid wall insulation;
ii
both are insulation of a cavity wall; or
iii
both are district heating connections.
3
In this article, “flat”—
a
in respect of domestic premises in England and Wales, has the same meaning as in the Building Regulations 201055;
b
in respect of domestic premises in Scotland, has the same meaning as in the Building (Scotland) Regulations 200456 and also includes a maisonette, as defined in those Regulations.