Search Legislation

The Electricity and Gas (Energy Company Obligation) Order 2022

Changes over time for: Section 50

 Help about opening options

Alternative versions:

Status:

Point in time view as at 27/07/2022.

Changes to legislation:

There are currently no known outstanding effects for the The Electricity and Gas (Energy Company Obligation) Order 2022, Section 50. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

ECO4 projects: minimum requirement for energy efficiency improvementE+W+S

This section has no associated Explanatory Memorandum

50.—(1) An ECO4 project meets the minimum requirement for energy efficiency improvement in this article if it meets—

(a)condition A;

(b)where the participant’s exempted project allowance is not exhausted, condition B; or

(c)condition C.

(2) Condition A is met if the Administrator is satisfied, in relation to the domestic premises, that—

(a)if the pre-project SAP band is band D or E, the post-project SAP band is band A, B or C;

(b)if the pre-project SAP band is band F or G, the post-project SAP band is band A, B, C or D.

(3) Condition B is met if—

(a)the pre-project SAP band for the domestic premises is band E, F or G; and

(b)the Administrator is satisfied that—

(i)the ECO4 project could not meet condition A because—

(aa)to do so would require the installation of one or more measures which attract an exemption under Part 11; or

(bb)there is no combination of ECO4 eligible measures that would have enabled the project to meet condition A; and

(ii)as compared to the measures in the ECO4 project, no other combination of ECO4 eligible measures, excluding those attracting an exemption under Part 11, would have resulted in a larger increase in the SAP rating for the premises.

(4) Condition C is met if, in the case of domestic premises that have a pre-project SAP band of E, F or G, the Administrator is satisfied that neither condition A nor condition B could be met because there has been a change in the people who are occupying the premises.

(5) For the purposes of paragraph (1)(b), a participant’s exempted project allowance is not exhausted if X is less than the participant’s exempted project allowance, where “X” is the number of ECO4 projects promoted by the participant—

(a)which meet condition B in paragraph (3); and

(b)for which the Administrator has given a positive score under article 47(1)(b) before the ECO4 project in question.

(6) In this article, “post-project SAP band” has the meaning given in article 51.

Commencement Information

I1Art. 50 in force at 27.7.2022, see art. 1(1)

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources