Search Legislation

The Electricity and Gas (Energy Company Obligation) Order 2022

 Help about what version

What Version

 Help about advanced features

Advanced Features

Changes over time for: Section 80

 Help about opening options

Changes to legislation:

There are currently no known outstanding effects for the The Electricity and Gas (Energy Company Obligation) Order 2022, Section 80. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Transfer of measuresE+W+S

This section has no associated Explanatory Memorandum

80.—(1) A relevant supplier may apply to the Administrator with another relevant supplier for one or more measures which are promoted by the relevant supplier (“A”) to be treated as promoted by the other relevant supplier (“B”) (a “proposed transfer”).

(2) An application under paragraph (1) must—

(a)be made by A and B, in writing, on or before 30th June 2026;

(b)be made in respect only of measures which—

(i)have been notified to the Administrator in accordance with [F1article 43(a) to (cb)]; or

(ii)are surplus actions;

(c)if the application is made in respect of a measure which is part of an ECO4 project, be made in respect of all the measures which are part of that project;

(d)if the application is made in respect of an in-fill measure or a primary measure with which an in-fill measure is linked, be made in respect of—

(i)the in-fill measure;

(ii)all of the primary measures with which the in-fill measure is linked; and

(iii)any other measures which are part of the same ECO4 project as any of the primary measures referred to in paragraph (ii); and

(e)include such information relating to the proposed transfer as the Administrator may require.

(3) The Administrator must reject the application if—

(a)the requirements in paragraph (2) are not met; or

(b)where A and B are not members of the same group, the Administrator considers that, if the application were approved, there is a significant risk that A would be unable to achieve its total home-heating cost reduction obligation, total solid wall minimum requirement or total EFG minimum requirement.

(4) If the Administrator decides to reject the application it must in writing—

(a)notify A of any reasons for that decision relating to A; and

(b)notify B of any reasons for that decision relating to B.

(5) If the Administrator approves the application—

(a)[F2except for the purposes of articles 20(1)(b), 21(2)(b), 43(a) and 45(4),] the following are treated as promoted by B and not A for the purposes of this Order—

(i)each measure in respect of which the application was made; and

(ii)if a measure referred to in paragraph (i) is part of an ECO4 project, the project and any item of work to which article 62(2) applies in relation to the project; and

(b)the Administrator must notify A and B in writing of the date on which the application was approved.

(6) For the purposes of this article—

primary measure” has the same meaning as in—

(a)

article 22(1), in relation to a flat in-fill measure;

(b)

article 23(1), in relation to a house in-fill measure;

relevant supplier” means—

(a)

a participant; or

(b)

a licence-holder on whom a home-heating cost reduction obligation was imposed under the 2018 Order.

Textual Amendments

Commencement Information

I1Art. 80 in force at 27.7.2022, see art. 1(1)

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources