- Latest available (Revised) - English
- Latest available (Revised) - Welsh
- Original (As made) - English
- Original (As made) - Welsh
There are outstanding changes not yet made by the legislation.gov.uk editorial team to The Plastic Materials and Articles in Contact with Food (Wales) Regulations 2008. Any changes that have already been made by the team appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
7.—(1) Correction by the FRF may not be used —
(a)where the plastic material or article is in contact or is intended to be brought into contact with foods intended for infants and young children;
(b)for substances listed in the Annexes having a restriction in column (4) of SML = ND;
(c)for substances not listed in the Annexes and used behind a plastic functional barrier with a migration limit of 0.01 mg/kg;
(d)except in the circumstances specified in sub-paragraph (2), for plastic materials or articles —
(i)for which it is impracticable to estimate the relationship between the surface area and the quantity of food in contact with it, due to shape, use or other factors, and
(ii)where the migration is calculated using the conventional surface area/volume conversion factor of 6 dm2/kg.
(2) For containers and other fillable articles with a capacity of less than 500 millilitres or more than 10 litres and for sheets and films in contact with foods containing more than 20% fat —
(a)the migration may be calculated as concentration (expressed as mg/kg) in the food or food simulant and corrected by the FRF; or
(b)the migration may be re-calculated as mg/dm2 without applying the FRF,
and provided the value resulting from the calculation under either sub-paragraph (a) or (b) is below the SML the plastic material or article must be considered to be in compliance.
Commencement Information
I1Sch. 2 para. 7 in force at 1.5.2008, see reg. 1(b)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: