The Air Quality Standards (Wales) Regulations 2010

Definitions E+W

2.—(1) In these Regulations—

“ambient air” (“aer amgylchynol”) means outdoor air in the troposphere, excluding workplaces as defined by Council Directive 89/654/EEC M1 where provisions concerning health and safety at work apply and to which members of the public do not have regular access;

“AOT 40” (“AOT 40”) (expressed in (μg/m³) · hours) means the sum of the difference between hourly concentrations greater than 80 μg/m³ (= 40 parts per billion) and 80 μg/m³ over a given period using only the one-hour values measured between 08:00 hours and 20:00 hours Central European Time (CET) each day;

“arsenic” (“arsenig”), “cadmium” (“cadmiwm”), “nickel” (“nicel”) and “benzo(a)pyrene” (“benso(a)pyren”) mean the total content of those elements and compounds within the PM₁₀ fraction;

“assessment” (“asesu”, “asesiad”) means assessment carried out by means of fixed measurements, indicative measurements, modelling or objective estimation techniques;

“Directive 2004/107/EC” (“Cyfarwyddeb 2004/107/EC”) means Directive 2004/107/EC of the European Parliament and of the Council relating to arsenic, cadmium, mercury, nickel and polycyclic aromatic hydrocarbons in ambient air M2 ;

“Directive 2008/50/EC” (“Cyfarwyddeb 2008/50/EC”) means Directive 2008/50/EC of the European Parliament and of the Council on ambient air quality and cleaner air for Europe M3 ;

“fixed measurements” (“mesuriadau sefydlog”) means measurements taken at fixed locations, either continuously or by sampling from time to time, to determine levels of pollutants in accordance with the relevant data quality objectives;

“indicative measurements” (“mesuriadau dangosol”) means measurements which meet data quality objectives that are less strict than those required for fixed measurements;

“margin of tolerance” (“ffin goddefiant”) means the percentage of the limit value by which that value may be exceeded in a given year;

“oxides of nitrogen” (“ocsidau nitrogen”) means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (μg/m³);

“PM₁₀” (“PM₁₀”) means particulate matter which passes through a size-selective inlet as defined in the reference method for the sampling and measurement of PM₁₀, EN 12341, with a 50% efficiency cut-off at 10 μm aerodynamic diameter;

“PM_2·5” (“PM_2·5”) means particulate matter which passes through a size-selective inlet as defined in the reference method for the sampling and measurement of PM_2·5, EN 14907, with a 50% efficiency cut-off at 2,5 μm aerodynamic diameter;

“pollutant” (“llygrydd”) means any of the following—

(a)

arsenic,

(b)

benzene,

(c)

benzo(a)pyrene or other polycyclic aromatic hydrocarbons,

(d)

cadmium,

(e)

carbon monoxide,

(f)

lead,

(g)

mercury,

(h)

nickel,

(i)

nitrogen dioxide,

(j)

oxides of nitrogen,

(k)

ozone,

(l)

PM₁₀,

(m)

PM_2·5,

(n)

sulphur dioxide;

“polycyclic aromatic hydrocarbons” (“hydrocarbonau aromatig polysyclig”) means those organic compounds composed of at least two fused aromatic rings made entirely from carbon and hydrogen; and

“total deposition rate” (“cyfradd llwyr ddyddodiad”) means the total mass of pollutants which is transferred from the atmosphere to surfaces such as soil, vegetation, water and buildings in a given area within a given time.

F1 (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F1 Reg. 2(2) omitted (31.12.2020) by virtue of The Air Quality Standards (Wales) (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/390), regs. 1(1), 2(2); 2020 c. 1, Sch. 5 para. 1(1)

Marginal Citations

M1 OJ No L 393, 30.12.89, p. 1, amended by Directive 2007/30/EC (OJ No L 165, 27.6.07, p. 21).

M2 OJ No L 23, 26.1.05, p 3, last amended by Regulation (EC) No 219/2009 (OJ No L 87, 31.3.09, p. 109).

M3 OJ No L 152, 11.6.08, p 1.