Regulation 7

SCHEDULE 1E+WForm of Certificate of Analysis

Notes for completion of certificate

1.  Insert the name of the local authority.E+W

2.  Insert date.E+W

3.  Insert name of person submitting the sample for analysis and mode of transport.E+W

4.  Insert the name or description applied to the material.E+W

5.  Insert the distinguishing mark on the sample and the date of sampling shown.E+W

6.  Indicate the particulars marked, labelled or otherwise documented.E+W

7.  Insert the relevant results, the conclusions drawn from those results and any other relevant observations. Expand this section as necessary.E+W

8.  In the case of analysis of substances for which no method is prescribed by relevant EU legislation, after the results indicate the method used.E+W

Regulation 25(3)(a)

SCHEDULE 2E+WEntries to be substituted in Chapter A of Schedule 5 to the Feeding Stuffs (Wales) Regulations 2006

Column 1Column 2Column 3
Undesirable substancesProducts intended for animal feedMaximum content in mg/kg of feeding stuffs referred to a moisture content of 12%
ArsenicFeed materials2
 except: 
 — meal made from grass, from dried lucerne or from dried clover, and dried sugar beet pulp and dried molasses sugar beet pulp4
 — palm kernel expeller4
 — phosphates and calcareous marine algae10
 — calcium carbonate15
 — magnesium oxide20
 — feeding stuffs obtained from the processing of fish or other marine animals25
 — seaweed meal and feed materials derived from seaweed40
 Iron particles used as tracer50
 Additives belonging to the functional group of compounds of trace elements30
 except 
 — copper sulphate pentahydrate and copper carbonate50
 — zinc oxide, manganese oxide and copper oxide100
 Complete feeding stuffs2
 except 
 — complete feeding stuffs for fish and for fur-producing animals10
 Complementary feeding stuffs4
 except 
 — mineral feeding stuffs12
  Notes in respect of all entries in column 3:
  The maximum contents refer to total arsenic.
  The maximum contents refer to an analytical determination of arsenic, whereby extraction is performed in nitric acid (5% w/w) for 30 minutes at boiling point. Equivalent extraction procedures can be applied where it can be demonstrated that the procedure used has an equal extraction efficiency.