Version Superseded: 27/10/2017
Point in time view as at 28/11/2015.
There are currently no known outstanding effects for the The Natural Mineral Water, Spring Water and Bottled Drinking Water (Wales) Regulations 2015, SCHEDULE 9.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulation 24(2)(b)
1. Each food authority must monitor water bottled and labelled as “spring water”, “dŵr ffynnon”, or its equivalent in any other language, and bottled drinking water, for radon, tritium and indicative dose in accordance with this Part.E+W
2. Each food authority must undertake representative surveys to determine the scale and nature of likely exposure to radon originating from different types of ground water sources and wells in different geological areas.
3. The representative surveys must be designed in such a way that underlying parameters, including the geology and hydrology of the area, radioactivity of rock or soil and well type, can be identified and used to direct further action to areas of likely high exposure.E+W
4. Each food authority must monitor for radon if there is reason to believe, on the basis of the results of the representative surveys or other reliable information, that the parametric value for radon specified in Part 4 of Schedule 7 might be exceeded.E+W
5. Each food authority must monitor for tritium if an anthropogenic source of tritium or other artificial radionuclide is present within the catchment area and it cannot be shown on the basis of other surveillance programmes or investigations that the level of tritium is below the parametric value specified in Part 4 of Schedule 7.
6. Sampling must be carried out at the frequencies specified in the Table in Part 2 of this Schedule.E+W
7. If the concentration of tritium exceeds the parametric value specified in Part 4 of Schedule 7, the food authority must investigate the presence of other artificial radionuclides.E+W
8. Each food authority must monitor for indicative dose if a source of artificial or elevated natural radioactivity is present and it cannot be shown on the basis of representative monitoring programmes or other investigations that the level of indicative dose is below the parametric value specified in Part 4 of Schedule 7.
9. Sampling must be carried out at the frequencies specified in the Table in Part 2 of this Schedule.E+W
10. The food authority may use various reliable screening strategies to monitor for the parametric indicator value for indicative dose.E+W
11. If the food authority screens for an individual radionuclide or certain radionuclides and—E+W
(a)one of the activity concentrations exceeds 20% of the corresponding derived value specified in Table 1 in Part 2 of Schedule 11; or
(b)where applicable, the concentration of tritium exceeds the parametric value specified in Part 4 of Schedule 7, the food authority must investigate the presence of other radionuclides, as determined by the food authority, taking into account all relevant information about likely sources of radioactivity.
12.—(1) If the food authority screens for gross alpha activity and gross beta activity and—E+W
(a)the screening level for gross alpha activity exceeds 0.1 Bq/l; or
(b)the screening level for gross beta activity exceeds 1.0 Bq/l, the food authority must investigate the presence of other radionuclides as determined by the food authority, taking into account all relevant information about likely sources of radioactivity.
(2) The food authority may set alternative screening levels for gross alpha activity and gross beta activity if it can demonstrate that the alternative levels are in compliance with an indicative dose of 0.1mSv.
(3) If elevated levels of tritium are detected which indicate the presence of other artificial radionuclides, tritium, gross alpha activity and gross beta activity must be measured in the same sample.
(4) If the gross alpha activity and gross beta activity are less than 0.1 Bq/l and 1.0 Bq/l respectively, the food authority may assume that the indicative dose is less than the parametric value of 0.1 mSv in which case further radiological investigation is not required unless it is known from other sources of information that specific radionuclides are present in the water that are liable to cause an indicative dose in excess of 0.1 mSv.
13. A food authority is not required to monitor water bottled and labelled as “spring water”, “dŵr ffynnon”, or its equivalent in any other language, or bottled drinking water, for radon, tritium or indicative dose if—
(a)it is satisfied on the basis of representative surveys, monitoring data or other reliable information that, for a minimum period of 5 years, the parameter in question will remain below the respective parametric value specified in Part 4 of Schedule 7; and
(b)it notifies the Agency of that decision and provides the Agency with a copy of the representative surveys, monitoring data or other reliable information referred to in sub-paragraph (a).
14. Where bottled drinking water has been treated to reduce the level of radionuclides, the food authority must carry out monitoring at the frequencies indicated in the Table in Part 2 to ensure the continued efficacy of that treatment.
15. If a parametric value specified in Part 4 of Schedule 7 is exceeded in a sample of water, the food authority must take further samples as appropriate, having regard to guidance issued by the Agency, to ensure that the measured values are representative of an average activity concentration for a full year.
1 A supply zone is a geographically defined area within which water intended for human consumption comes from one or more sources and within which water quality may be considered as being approximately uniform. | |
2 The volumes are calculated as averages taken over a calendar year. | |
3 As far as possible, the number of samples should be distributed equally in time and location. | |
Volume of water produced each day within a supply zone 12 m3 | Number of samples per year 3 |
---|---|
volume ≤ 100 | 1 |
100 < volume ≤ 100 | 1 |
1,000 < volume ≤ 10,000 | 1+1 for each 3,300m3/d and part thereof of the total volume |
10, 000 < volume ≤ 100,000 | 3+1 for each 10,000 m3/d and part thereof of the total volume |
volume > 100,000 | 10+1 for each 25,000 m3/d and part thereof of the total volume |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area. The revised version is currently only available in English.
Original (As Enacted or Made) - English: The original English language version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Original (As Enacted or Made) - Welsh:The original Welsh language version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search. A point in time version is only available in English.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: