Regulation 3(1)
The preparation of Lactiplantibacillus plantarum (DSM 26571) specified in the table, belonging to the additive category “technological additives” and to the functional group “silage additives”, is authorised as an additive in animal nutrition subject to the conditions set out in the table.
(1) Details of the analytical methods are set out in the document referenced “Ares(2020)5563084 – 15/10/2020” and “JRC.F.5/CvH/ZE/AS/Ares”, and last updated on 16 October 2020. Available at: https://joint-research-centre.ec.europa.eu/publications/fad-2019-0091_en. | |
(2) Under reference BS EN 15787:2021 “Animal feeding stuffs: Methods of sampling and analysis. Detection and enumeration of Lactobacillus spp. used as feed additive”. Published by the British Standards Institution on 31 December 2021 (ISBN 978 0 580 99831 7). Available at: https://knowledge.bsigroup.com. | |
(3) CFU (colony-forming unit) additive/kg of fresh material. | |
(4) Easy to ensile forage: > 3% soluble carbohydrates in fresh material; moderately difficult to ensile forage: 1.5 to 3.0% soluble carbohydrates in the fresh material; difficult to ensile forage: < 1.5% soluble carbohydrates in the fresh material. | |
Additive | Lactiplantibacillus plantarum (DSM 26571) |
Identification number | 1k1604 |
Authorisation holder | None |
Additive category | Technological additives |
Functional group | Silage additives |
Additive composition | Solid preparation of Lactiplantibacillus plantarum (DSM 26571) containing a minimum of 1 × 10 11 CFU/g additive |
Characterisation of the active substance(s) | Viable cells of Lactiplantibacillus plantarum (DSM 26571) |
Analytical methods(1) | For enumeration (colony count) of the feed additive:
|
For identification of bacterial strain:
| |
Species or category of animal | All animal species |
Maximum age | None |
Minimum content(3) | Minimum content of the additive when not combined with other micro-organisms as silage additives:
|
Maximum content(3) | None |
Other provisions | 1. The storage conditions must be stated in the directions for use of the feed additive and premixture |
2. The additive is authorised for use in easy to ensile, moderately difficult to ensile, or difficult to ensile fresh material(4) |