Regulation (EU) 2018/1139 of the European Parliament and of the CouncilShow full title

Article 58 U.K. Delegated powers

1. For the design, production and maintenance of aircraft referred to in points (a) and (b) of Article 2(1), where it concerns unmanned aircraft, and their engines, propellers, parts, non-installed equipment and equipment to control the aircraft remotely, as well as for the personnel, including remote pilots, and organisations involved in those activities, [F1 the Secretary of State may make regulations] laying down detailed rules with regard to:

(a) the specific conditions for the design, production and maintenance of unmanned aircraft and their engines, propellers, parts, non-installed equipment and equipment to control the aircraft remotely, as well as for personnel, including remote pilots, and organisations involved in those activities, necessary to ensure compliance with the essential requirements referred to in Article 55 which may include the conditions under which unmanned aircraft are required to be equipped with necessary features and functionalities related, in particular, to maximum operating distance and altitude limitations, position communication, geographical zones entry restriction, collision avoidance, flight stabilisation and automated landing;

(b) the conditions and procedures for issuing, maintaining, amending, limiting, suspending, or revoking the certificates, or for making declarations, for the design, production and maintenance of unmanned aircraft, their engines, propellers, parts, non-installed equipment and equipment to control them remotely, as well as for the personnel, including remote pilots, and organisations involved in those activities, referred to in Article 56(1) and (5), and for the situations in which such certificates or declarations are to be required; the conditions and procedures for issuing those certificates and for making those declarations may be based on, or consist of, the detailed requirements referred to in Sections I, II and III;

(c) the conditions under which the requirements concerning the design, production and maintenance of unmanned aircraft and their engines, propellers, parts, non-installed equipment and equipment to control them remotely, are not to be subject to Chapters IV and V, for the purpose of Article 56(6);

(d) the privileges and responsibilities of the holders of certificates and of natural and legal persons making declarations;

(e) the conditions for the conversion of national certificates into the certificates required under Article 56(1).

2. As regards the design, production, maintenance and operation of aircraft referred to in points (a) and (b) of Article 2(1), where it concerns unmanned aircraft, and their engines, propellers, parts, non-installed equipment and equipment to control the aircraft remotely, as well as the personnel, including remote pilots, and organisations involved in those activities, [F2 the Secretary of State may make regulations] to amend Annex IX and, if applicable, Annex III, where necessary for reasons of technical, operational or scientific developments or safety evidence related to air operations, in order and to the extent required to achieve the objectives set out in Article 1.

Textual Amendments

F1 Words in Art. 58(1) substituted (31.12.2020) by The Aviation Safety (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/645), regs. 1, 134(2) (with Sch. 3) (as amended by S.I. 2019/1098, regs. 1(3), 12); 2020 c. 1, Sch. 5 para. 1(1)

F2 Words in Art. 58(2) substituted (31.12.2020) by The Aviation Safety (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/645), regs. 1, 134(3) (with Sch. 3) (as amended by S.I. 2019/1098, regs. 1(3), 12); 2020 c. 1, Sch. 5 para. 1(1)