- Latest available (Revised)
- Original (As made)
The Toys (Safety) Regulations 2011
You are here:
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Changes over time for: Section 17
Alternative versions:
Status:
There are multiple versions of this provision on screen. These apply to different geographical extents.
Status
The term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Sometimes the text of a provision is changed, but the change(s) only apply to a particular geographical area. In some limited cases where this happens, the editorial team create a version for each different geographical area. Multiple versions are only created in this way where the change in question is a substitution so that there are different versions of the text for the different extents. Insertions and repeals of text do not give rise to such multiple versions.
Changes to legislation:
There are currently no known outstanding effects for the The Toys (Safety) Regulations 2011, Section 17.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Technical documentation and correspondence relating to [F1Type] examinationE+W+S
This section has no associated Explanatory Memorandum
17.—(1) The manufacturer must draw up technical documentation which contains all relevant information about the means used by the manufacturer to ensure that a toy will comply with the essential safety requirements during its foreseeable and normal period of use.
[F2(2) The technical documentation must be drawn up in English.]
(3) The technical documentation must include the information and documents listed in [F3Schedule 4] (technical documentation).
[F4(4) Any correspondence relating to the Type examination of a toy must be drawn up in English.]
(5) The manufacturer must keep the technical documentation for a toy (including the F5... declaration of conformity) for a period of 10 years after the day on which the toy was placed on the market.
F6(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F6(7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F6(8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F6(9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(10) If a manufacturer fails to comply with any of the manufacturer's obligations under paragraphs (1), (2) [F7or (3)], an enforcement authority may request the manufacturer to ensure that [F8an approved] body performs such tests as [F9the approved] body identifies, within such period as [F9the approved] body may specify, to verify that the toy will comply with the essential safety requirements during its foreseeable and normal period of use, and that the toy complies with any [F10designated] standard applicable to the toy.
(11) The manufacturer must comply with the request (at the manufacturer's own expense).
Extent Information
E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F1Word in reg. 17 heading substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 15 para. 16(a) (with Sch. 15 para. 3) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2Reg. 17(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 15 para. 16(b) (with Sch. 15 para. 3) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F3Words in reg. 17(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 15 para. 16(c) (with Sch. 15 para. 3) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F4Reg. 17(4) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 15 para. 16(d) (with Sch. 15 para. 3) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F5Word in reg. 17(5) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 15 para. 16(e) (with Sch. 15 para. 3) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F6Reg. 17(6)-(9) omitted (1.10.2015) by virtue of The Consumer Rights Act 2015 (Commencement No. 3, Transitional Provisions, Savings and Consequential Amendments) Order 2015 (S.I. 2015/1630), art. 1, Sch. 2 para. 122(a)
F7Words in reg. 17(10) substituted (1.10.2015) by The Consumer Rights Act 2015 (Commencement No. 3, Transitional Provisions, Savings and Consequential Amendments) Order 2015 (S.I. 2015/1630), art. 1, Sch. 2 para. 122(b)
F8Words in reg. 17(10) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 15 para. 16(f)(i) (with Sch. 15 para. 3) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F9Words in reg. 17(10) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 15 para. 16(f)(ii) (with Sch. 15 para. 3) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F10Word in reg. 17(10) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 15 para. 16(f)(iii) (with Sch. 15 para. 3) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
Technical documentation and correspondence relating to EC-type examinationN.I.
17.—(1) The manufacturer must draw up technical documentation which contains all relevant information about the means used by the manufacturer to ensure that a toy will comply with the essential safety requirements during its foreseeable and normal period of use.
(2) The technical documentation must be drawn up—
(a)in so far as it relates to EC-type examination of the toy, in an official language of the [F11relevant] State in which the notified body which performed that examination is established or in a language acceptable to that body;
(b)in so far as it does not relate to such examination, in one of the official languages of the EU.
(3) The technical documentation must include the information and documents listed in Annex IV of the Directive (technical documentation).
(4) Any correspondence relating to the EC-type examination of a toy must be drawn up in the official language of the [F12relevant] State in which the notified body is established or in a language acceptable to that body.
(5) The manufacturer must keep the technical documentation for a toy (including the EC declaration of conformity) for a period of 10 years after the day on which the toy was placed on the market.
(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(10) If a manufacturer fails to comply with any of the manufacturer's obligations under paragraphs (1), (2) [F13or (3)], an enforcement authority may request the manufacturer to ensure that a notified body performs such tests as the notified body identifies, within such period as the notified body may specify, to verify that the toy will comply with the essential safety requirements during its foreseeable and normal period of use, and that the toy complies with any harmonised standard applicable to the toy.
(11) The manufacturer must comply with the request (at the manufacturer's own expense).
Textual Amendments
F11Word in reg. 17(2) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 5 para. 3(1)
F12Word in reg. 17(4) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 5 para. 3(1)
Options/Help
Print Options
PrintThe Whole Instrument
PrintThe Whole Part
PrintThe Whole Cross Heading
PrintThis Section only
You have chosen to open The Whole Instrument
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
You have chosen to open The Whole Instrument as a PDF
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
You have chosen to open the Whole Instrument
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
Explanatory Memorandum
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as enacted version that was used for the print copy
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Impact Assessments
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
- Why the government is proposing to intervene;
- The main options the government is considering, and which one is preferred;
- How and to what extent new policies may impact on them; and,
- The estimated costs and benefits of proposed measures.
Timeline of Changes
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as made version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.