The Explosives Regulations 2014

[F1 SUB-PART B: CONFORMITY ASSESSMENT U.K.

Textual Amendments

F1 Pt. 13 (regs. 39-77) substituted for Pt. 13 (regs. 39-42) (and therefore original regs. 43, 44 renumbered as new regs. 78, 79, new reg. 80 substituted for original reg. 45 and original regs. 46-49 renumbered as new regs. 81-84) (20.4.2016) by The Explosives Regulations 2014 (Amendment) Regulations 2016 (S.I. 2016/315), regs. 1, 7, 8, 9 (with regs. 2(1), 15)

Presumption of conformity U.K.

65.— (1) A civil explosive which is in conformity with a [F2 designated] standard, or part of such a standard, F3 ... is to be presumed to be in conformity with the essential safety requirements covered by that standard, or that part of that standard.

(2) The presumption in paragraph (1) is rebuttable.

Textual Amendments

F2 Word in reg. 65(1) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 24(a) (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F3 Words in reg. 65(1) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 24(b) (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

[F4 Conformity assessment procedures U.K.

66.— (1) Assessment of conformity of a civil explosive is carried out by an approved body in accordance with the procedures set out in Schedule 17.

(2) For the assessment of conformity of a civil explosive, the manufacturer must follow one of the following procedures set out in Schedule 17—

(a) in Part 1 of Schedule 17, Type examination carried out by an approved body (Module B), and, at the choice of the manufacturer, one of the following procedures—

(i) in Part 2 of Schedule 17, conformity to type based on internal production control plus supervised product checks at random intervals (Module C2);

(ii) in Part 3 of Schedule 17, conformity to type based on quality assurance of the production process (Module D);

(iii) in Part 4 of Schedule 17, conformity to type based on product quality assurance (Module E);

(iv) in Part 5 of Schedule 17, conformity to type based on product verification (Module F);

(b) in Part 6 of Schedule 17, conformity based on unit verification (Module G).]

Textual Amendments

F4 Reg. 66 substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 25 (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

[F5 Declaration] of conformity U.K.

67.   The F6 ... declaration of conformity for a civil explosive must—

(a) state that the fulfilment of the essential safety requirements has been demonstrated in respect of the civil explosive;

(b) contain the elements specified in [F7 Schedule 17,] for the relevant conformity assessment procedure followed in respect of the civil explosive; and

(c) have the model structure set out in [F8 Schedule 18.]

Textual Amendments

F5 Word in reg. 67 heading substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 26(a) (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F6 Word in reg. 67 omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 26(b) (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F7 Words in reg. 67(b) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 26(c) (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F8 Words in reg. 67(c) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 26(d) (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

[F9 UK] marking U.K.

68.— (1) [F10 The UK marking must be affixed visibly, legibly and indelibly—

(a) to the civil explosive; or

(b) where paragraph (1A) applies, to—

(i) a label affixed to the civil explosive; or

(ii) the accompanying documents.]

[F11 (1A) For a period of [F12 seven years] beginning with IP completion day, the UK marking may be affixed to—

(a) a label affixed to the civil explosive; or

(b) the accompanying documents.]

(2) Where [F13 paragraph (1A) does not apply and] it is not possible or warranted, on account of the nature of the civil explosive, to affix the [F14 UK] marking in accordance with paragraph (1), the [F14 UK] marking must be affixed to—

(a) the packaging; and

(b) the accompanying documents.

(3) The [F15 UK] marking must be followed by the identification number of the [F16 approved] body which carried out the relevant conformity assessment procedure for the civil explosive, where that body is involved in the production control phase.

(4) The identification number of the [F17 approved] body must be affixed—

(a) by the [F17 approved] body itself; or

(b) under the instructions of the [F17 approved] body, by the manufacturer or the manufacturer’s authorised representative.

(5) In the case of a civil explosive—

(a) manufactured for the manufacturer’s own use;

(b) transported and delivered unpackaged or in a mobile explosives manufacturing unit for its direct unloading into the blast-hole; or

(c) manufactured at the blasting site which is loaded immediately after being produced,

the [F18 UK] marking must be affixed to the accompanying documents.]

Textual Amendments

F9 Word in reg. 68 heading substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 27(a) (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F10 Reg. 68(1) substituted (31.12.2020) by S.I. 2019/696, Sch. 16 para. 27(b) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 10(5)(a))

F11 Reg. 68(1A) inserted by S.I. 2019/696, Sch. 16 para. 27(ba) (as inserted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 10(5)(b))

F12 Words in reg. 68(1A) substituted (31.12.2022) by The Product Safety and Metrology (Amendment and Transitional Provisions) Regulations 2022 (S.I. 2022/1393), regs. 1(1), 3, Sch. 2 para. (g)

F13 Words in reg. 68(2) inserted (31.12.2020) by S.I. 2019/696, Sch. 16 para. 27(c)(i) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 10(5)(c))

F14 Word in reg. 68(2) substituted (31.12.2020) by S.I. 2019/696, Sch. 16 para. 27(c)(ii) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 10(5)(c))

F15 Word in reg. 68(3) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 27(d)(i) (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F16 Word in reg. 68(3) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 27(d)(ii) (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F17 Word in reg. 68(4) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 27(e) (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F18 Word in reg. 68(5) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 27(f) (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)