- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1. These Regulations may be cited as the Product Safety and Metrology (Amendment) (EU Exit) Regulations 2020.
Commencement Information
I1Reg. 1 in force at 31.12.2020 immediately before S.I. 2019/1246, regs. 10, 16 come into force, see reg. 2(1)
2.—(1) This regulation, and regulations [F11, 3 and 5] come into force immediately before the coming into force of regulations 10 and 16 of the Product Safety, Metrology and Mutual Recognition [F2Agreement] (Amendment) (EU Exit) Regulations 2019 M1.
(2) Regulation 4 comes into force immediately before IP completion day.
Textual Amendments
F1Words in reg. 2(1) substituted (31.12.2020 immediately before S.I. 2020/852 comes into force) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(3), Sch. 4 para. 1(2)(a)
F2Word in reg. 2(1) inserted (31.12.2020 immediately before S.I. 2020/852 comes into force) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(3), Sch. 4 para. 1(2)(b)
Commencement Information
I2Reg. 2 in force at 31.12.2020 immediately before S.I. 2019/1246, regs. 10, 16 come into force, see reg. 2(1)
Marginal Citations
M1S.I. No. 2019/1246.
3. Any amendment made by these Regulations has the same extent as the provision amended.
Commencement Information
I3Reg. 3 in force at 31.12.2020 immediately before S.I. 2019/1246, regs. 10, 16 come into force, see reg. 2(1)
4.—(1) The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 M2 are amended as follows.
(2) In the provisions listed in Schedule 1, for “exit day” substitute “ IP completion day ”.
(3) In Schedule 26 (non-automatic weighing instruments), in paragraph 2—
(a)in sub-paragraph (h) omit the words from “in the definition” to “Schedule 6”;
(b)after sub-paragraph (h) insert—
“(ha)in the definition of “essential requirements” for “Annex I to the Directive” substitute “ Schedule 6 ”;”.
Commencement Information
I4Reg. 4 in force at 31.12.2020 immediately before IP completion day, see reg. 2(2)
Marginal Citations
5. In the provisions of the Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 listed in Schedule 2, for “exit day” substitute “ IP completion day ”.
Commencement Information
I5Reg. 5 in force at 31.12.2020 immediately before S.I. 2019/1246, regs. 10, 16 come into force, see reg. 2(1) (as amended by S.I. 2020/1460, reg. 1(3), Sch. 4 para. 1(2)(a))
Paul Scully
Parliamentary Under Secretary of State
Department for Business, Energy and Industrial Strategy
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: