Commission Implementing Decision (EU) 2016/160Dangos y teitl llawn

Commission Implementing Decision (EU) 2016/160

of 5 February 2016

on the approval of the Toyota Motor Europe efficient exterior lighting using light emitting diodes as an innovative technology for reducing CO₂ emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 443/2009 of the European Parliament and of the Council of 23 April 2009 setting emissions performance standards for new passenger cars as part of the Community's integrated approach to reduce CO₂ emissions from light-duty vehicles(1), and in particular Article 12(4) thereof,

Whereas:

(1) The manufacturer Toyota Motor Europe NV/SA (the ‘Applicant’) submitted an application for the approval of an efficient exterior lighting system with the use of light emitting diodes (LEDs) as an innovative technology on 15 April 2015. The completeness of that application was assessed in accordance with Article 4 of Commission Implementing Regulation (EU) No 725/2011(2). The Commission identified certain relevant information as missing in the original application and requested the applicant to complete it. The applicant provided the required information on 26 May 2015. The application was found to be complete and the period for the Commission's assessment of the application started on the day following the date of official receipt of the complete information, i.e. 27 May 2015.

(2) The application has been assessed in accordance with Article 12 of Regulation (EC) No 443/2009, Implementing Regulation (EU) No 725/2011 and the Technical Guidelines for the preparation of applications for the approval of innovative technologies pursuant to Regulation (EC) No 443/2009 (the Technical Guidelines, version February 2013)(3).

(3) The application refers to an efficient exterior lighting system including low-beam headlamp, high-beam headlamp, front position, front fog, rear fog, front turn signal, rear turn signal, licence plate and reversing lamps fitted with LEDs..

(4) The Commission finds that the information provided in the application demonstrates that the conditions and criteria referred to in Article 12 of Regulation (EC) No 443/2009 and in Articles 2 and 4 of Implementing Regulation (EU) No 725/2011 have been met.

(5) The applicant has demonstrated that the use of the LEDs in the in the low-beam headlamp, the high-beam headlamp, the front position, front fog lamp, rear fog lamp, front turn signal, rear turn signal, licence plate and reversing lamp did not exceed 3 % of the new passenger cars registered in the reference year 2009. In support of this the applicant has referred to the Technical Guidelines, which provides for the summary of the CLEPA Light Sight Safety report. The applicant has used predefined functions and averaged data in line with the simplified approach specified in the Technical Guidelines (version February 2013).

(6) The applicant has in accordance with the simplified approach described in the Technical Guidelines used halogen lighting as baseline technology for demonstrating the CO₂-reducing capacity of the efficient exterior lighting system with the use of LEDs in the low-beam headlamp, the high-beam headlamp, the front position, front fog lamp, rear fog lamp, front turn signal, rear turn signal, licence plate and reversing lamp.

(7) The applicant has provided a methodology for testing the CO₂ reductions which includes formulae that are consistent with the formulae described in the Technical Guidelines for the simplified approach with regard to lighting functions. The Commission considers that the testing methodology will provide testing results that are verifiable, repeatable and comparable and that it is capable of demonstrating in a realistic manner the CO₂ emissions benefits of the innovative technology with strong statistical significance in accordance with Article 6 of Implementing Regulation (EU) No 725/2011.

(8) Against that background the Commission finds that the applicant has demonstrated satisfactorily that the emission reduction achieved by the efficient exterior lighting system including the low-beam headlamp, high-beam headlamp, front position lamp, front fog lamp, rear fog lamp and licence plate lamp is at least 1 gCO₂/km. It should therefore also be concluded that an efficient exterior lighting system including not only those lamps but also the front turn signal, rear turn signal and the reversing lamps fitted with LEDs or another appropriate combination of those lamps could achieve a CO₂ reduction of at least 1 gCO₂/km.

(9) Since the activation of the exterior lighting is not required for the CO₂ emissions type-approval test referred to in Regulation (EC) No 715/2007 of the European Parliament and of the Council(4) and Commission Regulation (EC) No 692/2008(5), the Commission is satisfied that the lighting functions in question are not covered by the standard test cycle.

(10) The activation of the lighting functions concerned is mandatory to ensure the safe operation of the vehicle and as a consequence not dependent on the choice of the driver. On that basis the Commission finds that the manufacturer should be considered accountable for the CO₂ emission reduction due to the use of the innovative technology.

(11) The Commission finds that the verification report has been prepared by Vehicles Certification Agency which is an independent and certified body and that the report supports the findings set out in the application.

(12) Against that background, the Commission finds that no objections should be raised as regards the approval of the innovative technology in question.

(13) Any manufacturer wishing to benefit from a reduction of its average specific CO₂ emissions for the purpose of meeting its specific emissions target by means of the CO₂ savings from the use of the innovative technology approved by this Decision, should in accordance with Article 11(1) of Implementing Regulation (EU) No 725/2011, refer to this Decision in its application for an EC type-approval certificate for the vehicles concerned.

(14) For the purposes of determining the general eco-innovation code to be used in the relevant type-approval documents in accordance with Annexes I, VIII and IX to Directive 2007/46/EC of the European Parliament and of the Council(6), the individual code to be used for the innovative technology approved through this Implementing Decision should be specified,

HAS ADOPTED THIS DECISION:

(1)

OJ L 140, 5.6.2009, p. 1.

(2)

Commission Implementing Regulation (EU) No 725/2011of 25 July 2011 establishing a procedure for the approval and certification of innovative technologies for reducing CO₂ emissions from passenger cars (OJ L 194, 26.7.2011, p. 19).

(3)

https://circabc.europa.eu/w/browse/42c4a33e-6fd7-44aa-adac-f28620bd436f

(4)

Regulation (EC) No 715/2007 of the European Parliament and of the Council of 20 June 2007 on type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (OJ L 171, 29.6.2007, p. 1).

(5)

Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (OJ L 199, 28.7.2008, p. 1).

(6)

Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (OJ L 263, 9.10.2007, p. 1).