Council Directive of 18 December 1975 on the approximation of the laws of the Member States relating to statutory plates and inscriptions for motor vehicles and their trailers, and their location and method of attachment (76/114/EEC) (repealed)

ANNEX U.K.

1. GENERAL U.K.

1.1. All vehicles must be provided with the plate and inscriptions described in the following sections. The plate and inscriptions shall be attached either by the manufacturer or by his authorized representative. U.K.

2. MANUFACTURER'S PLATE U.K.

2.1. A manufacturer's plate, modelled on that shown in the appendix hereto, must be firmly attached in a conspicuous and readily accessible position on a part not subject to replacement in use. It must show clearly and indelibly the following information in the order listed: U.K.

2.1.1. Name of the manufacturer. U.K.

2.1.2. EEC type-approval number(1). U.K.

This number is composed of a small letter ‘e’ followed, in the order given, by the distinguishing number or letters of the country which granted the EEC type-approval [F1 (1 for Germany, 2 for France, 3 for Italy, 4 for the Netherlands, 6 for Belgium, 9 for Spain, 11 for the United Kingdom, 13 for Luxembourg, 18 for Denmark, [F2 EL for Greece] , IRL for Ireland, P for Portugal [F3 [F4 , 12 for Austria, 17 for Finland, 5 for Sweden] ] [F5 , 8 for the Czech Republic, 29 for Estonia, CY for Cyprus, 32 for Latvia, 36 for Lithuania, 7 for Hungary, MT for Malta, 20 for Poland, 26 for Slovenia, 27 for Slovakia] [F6 , 34 for Bulgaria, 19 for Romania] [F7 , ] [F7 25 за Хърватия] )] and by the type-approval number corresponding to the number on the type-approval certificate for the type of vehicle. An asterisk shall be placed between the letter ‘e’ and the distinguishing number or letters of the country which granted the EEC type-approval, and between the distinguishing number or letters and the type-approval number.

Textual Amendments

F1 Substituted by Act concerning the conditions of accession of the Kingdom of Spain and the Portuguese Republic and the adjustments to the Treaties.

F2 Substituted by Council Directive of 25 June 1987 amending certain directives on the approximation of the laws of the Member States relating to industrial products with respect to the distinctive numbers and letters indicating the Member States (87/354/EEC).

F3 Inserted by Act concerning the conditions of accession of the Kingdom of Norway, the Republic of Austria, the Republic of Finland and the Kingdom of Sweden and the adjustments to the Treaties on which the European Union is founded (94/C 241/08).

F4 Substituted by Decision of the Council of the European Union of 1 January 1995 adjusting the instruments concerning the accession of new Member States to the European Union (95/1/EC, Euratom, ECSC).

F5 Inserted by Act concerning the conditions of accession of the Czech Republic, the Republic of Estonia, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Republic of Hungary, the Republic of Malta, the Republic of Poland, the Republic of Slovenia and the Slovak Republic and the adjustments to the Treaties on which the European Union is founded.

F6 Inserted by Council Directive 2006/96/EC of 20 November 2006 adapting certain Directives in the field of free movement of goods, by reason of the accession of Bulgaria and Romania.

F7 Inserted by Council Directive 2013/15/EU of 13 May 2013 adapting certain directives in the field of free movement of goods, by reason of the accession of the Republic of Croatia.

2.1.3. Vehicle identification number. U.K.

2.1.4. Maximum permitted laden [F8 mass] of the vehicle. U.K.

Textual Amendments

F8 Substituted by Commission Directive of 19 May 1978 adapting to technical progress Council Directive 76/114/EEC on the approximation of the laws of the Member States relating to statutory plates and inscriptions for motor vehicles and their trailers, and their location and method of attachment (78/507/EEC).

2.1.5. Maximum permitted laden [F8 mass] for the combination, where the vehicle is used for towing. U.K.

2.1.6. Maximum permitted road [F8 mass] for each axle, listed in order from front to rear. U.K.

2.1.7. In the case of a semi-trailer, the maximum permitted [F8 mass] on the fifth wheel king pin. U.K.

2.1.8. The requirements of 2.1.4 to 2.1.7 shall not enter into force until 12 months have elapsed from the date of adoption of the Council Directive on [F8 masses and dimensions of motor vehicles and their trailers. In the meantime, however, a Member State may require that the maximum permitted masses] prescribed in its national legislation be shown on the plate of any vehicle which has entered into service in its territory. U.K.

If the technically permissible [F8 mass is higher than the maximum permitted mass, the Member State in question may request that the technically permissible mass also be stated. The mass would be set out in two columns: the maximum permitted mass on the left and the technically permissible mass] on the right.

2.2 The manufacturer may give additional information below or to the side of the prescribed inscriptions, outside a clearly marked rectangle which shall enclose only the information prescribed in 2.1.1 to 2.1.8 (see the Appendix to this Annex). U.K.

3. VEHICLE IDENTIFICATION NUMBER U.K.

The vehicle identification number is a fixed combination of characters assigned to each vehicle by the manufacturer. Its purpose is to ensure that every vehicle can be clearly identified over a period of 30 years through the intermediary of the manufacturer, without there being a need for reference to further data. The vehicle identification number must conform to the following requirements:

[F8 3.1. It must be marked on the manufacturer's plate, and also on the chassis, frame or other similar structure. U.K.

3.1.1. It must consist of three sections. U.K.

3.1.1.1. The first section shall consist of a code assigned to the vehicle manufacturer to enable him to be identified. The code shall comprise three characters, letters or figures which shall be assigned by the competent authorities of the country where the manufacturer has his principal place of business, by agreement with the international agency acting under the authority of the International Organization for Standardization (ISO). The first character shall designate a geographical area, the second a country within a geographical area, and the third a specific manufacturer. U.K.

Where the manufacturer produces less than 500 vehicles per year, the third character shall always be ‘ 9 ’ . In order to identify such manufacturers, the competent authority referred to above shall also assign the third, fourth and fifth characters of the third section.

3.1.1.2. The second section shall be composed of six characters (letters or figures) which shall serve to indicate the general characteristics of the vehicle. If the manufacturer does not use one or more of these characters, the unused spaces must be filled by alphabetical or numerical characters, of the manufacturer's choice. U.K.

3.1.1.3. The third section, composed of eight characters, of which the last four must be numerical, must in conjunction with the other two sections provide clear identification of a particular vehicle. Any unused space must be filled by a zero in order that the total number of characters required may be fulfilled. U.K.

3.1.2. It must wherever possible be marked on a single line. U.K.

As an exception, for technical reasons, it may also be marked on two lines. However, in this latter case no section may be divided between the two lines. The beginning and end of each line must be indicated by a symbol which is neither an arabic numeral nor a roman capital letter, and which cannot be confused with either. This requirement may be waived in the case of manufacturer's plates where the number is marked on one line only. It is also permissible to place such a symbol between the three sections on one line (point 3.1.1).

There must be no spaces between the characters.]

3.2. The identification number must, moreover: U.K.

3.2.1. be marked on the chassis, frame or other similar structure, on the right-hand side of the vehicle; U.K.

3.2.2. be placed in a clearly visible and accessible position by a method such as hammering or stamping, in such a way that it cannot be obliterated or deteriorate. U.K.

4. CHARACTERS U.K.

4.1. Roman letters and arabic numerals must be used for all the markings provided for in sections 2 and 3. However, the roman letters used in the markings provided for in 2.1.1 and 2.1.3 and 3 must be capital letters. U.K.

4.2. For the vehicle identification number: U.K.

4.2.1. use of the letters I, O and Q and dashes, asterisks and other special signs, other than the symbols referred to in the final paragraph of 3.1.2, is not permitted; U.K.

4.2.2. the minimum height of the letters and figures shall be as follows: U.K.

4.2.2.1. 7 mm for characters marked directly on the chassis, frame or other similar structure of the vehicle; U.K.

4.2.2.2. 4 mm for characters marked on the manufacturer's plate. U.K.

[F8 APPENDIX MODEL OF THE MANUFACTURER'S PLATE

The examples below do not prejudice the data which are actually to appear on manufacturers' plates. They are merely given as a guide.

Example No 1 U.K.

Example as for category M ₁ vehicle.

Additional information as provided for in 2.2 may be given below or to the side of the prescribed data (see rectangles shown with dotted lines in the above model).

Example No 2 U.K.

Example as for category N ₃ vehicle.

Additional information as provided for in 2.2 may be given below or to the side of the prescribed data (see rectangles shown with dotted lines in the above model).]

(1)

[F8 If a vehicle has not been given EEC type-approval and therefore does not have an EEC type approval number, a Member State may require that the national type-approval number be indicated. If a national type-approval number is required to be indicated the manufacturer can place it either on a plate separate from the manufacturer's plate or on the manufacturer's plate itself.]

Textual Amendments

F8 Substituted by Commission Directive of 19 May 1978 adapting to technical progress Council Directive 76/114/EEC on the approximation of the laws of the Member States relating to statutory plates and inscriptions for motor vehicles and their trailers, and their location and method of attachment (78/507/EEC).