- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Pwynt Penodol mewn Amser (15/12/2004)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC (Text with EEA relevance) (repealed)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
Version Superseded: 20/04/2016
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
Equipment shall be so designed and manufactured, having regard to the state of the art, as to ensure that:
the electromagnetic disturbance generated does not exceed the level above which radio and telecommunications equipment or other equipment cannot operate as intended;
it has a level of immunity to the electromagnetic disturbance to be expected in its intended use which allows it to operate without unacceptable degradation of its intended use.
Installation and intended use of components
A fixed installation shall be installed applying good engineering practices and respecting the information on the intended use of its components, with a view to meeting the protection requirements set out in Point 1. Those good engineering practices shall be documented and the documentation shall be held by the person(s) responsible at the disposal of the relevant national authorities for inspection purposes for as long as the fixed installation is in operation.
The technical documentation must enable the conformity of the apparatus with the essential requirements to be assessed. It must cover the design and manufacture of the apparatus, in particular:
a general description of the apparatus;
evidence of compliance with the harmonised standards, if any, applied in full or in part;
where the manufacturer has not applied harmonised standards, or has applied them only in part, a description and explanation of the steps taken to meet the essential requirements of the Directive, including a description of the electromagnetic compatibility assessment set out in Annex II, point 1, results of design calculations made, examinations carried out, test reports, etc.;
a statement from the notified body, when the procedure referred to in Annex III has been followed.
The EC declaration of conformity must contain, at least, the following:
a reference to this Directive,
an identification of the apparatus to which it refers, as set out in Article 9(1),
the name and address of the manufacturer and, where applicable, the name and address of his authorised representative in the Community,
a dated reference to the specifications under which conformity is declared to ensure the conformity of the apparatus with the provisions of this Directive,
the date of that declaration,
the identity and signature of the person empowered to bind the manufacturer or his authorised representative.
The ‘CE’ marking shall consist in the initials ‘CE’ taking the following form:
The ‘CE’ marking must have a height of at least 5 mm. If the ‘CE’ marking is reduced or enlarged the proportions given in the above graduated drawing must be respected.
The ‘CE’ marking must be affixed to the apparatus or to its data plate. Where this is not possible or not warranted on account of the nature of the apparatus, it must be affixed to the packaging, if any, and to the accompanying documents.
Where the apparatus is the subject of other Directives covering other aspects and which also provide for the ‘CE’ marking, the latter shall indicate that the apparatus also conforms with those other Directives.
However, where one or more of those Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the ‘CE’ marking shall indicate conformity only with the Directives applied by the manufacturer. In that case, particulars of the Directives applied, as published in the Official Journal of the European Union, must be given in the documents, notices or instructions required by the Directives and accompanying such apparatus.
availability of personnel and of the necessary means and equipment;
technical competence and professional integrity of personnel;
independence in preparing the reports and performing the verification function provided for in this Directive;
independence of staff and technical personnel in relation to all interested parties, groups or persons directly or indirectly concerned with the equipment in question;
maintenance of professional secrecy by personnel;
possession of civil liability insurance unless such liability is covered by the Member State under national law.
Directive 89/336/EEC | This Directive |
---|---|
Article 1, point 1 | Article 2(1)(a), (b) and (c) |
Article 1, point 2 | Article 2(1)(e) |
Article 1, point 3 | Article 2(1)(f) |
Article 1, point 4 | Article 2(1)(d) |
Article 1, points 5 and 6 | - |
Article 2(1) | Article 1(1) |
Article 2(2) | Article 1(4) |
Article 2(3) | Article 1(2) |
Article 3 | Article 3 |
Article 4 | Article 5 and Annex I |
Article 5 | Article 4(1) |
Article 6 | Article 4(2) |
Article 7(1)(a) | Article 6(1) and (2) |
Article 7(1)(b) | - |
Article 7(2). | - |
Article 7(3) | - |
Article 8(1) | Article 6(3) and (4) |
Article 8(2) | - |
Article 9(1) | Article 10(1) and (2) |
Article 9(2) | Article 10(3) and (4) |
Article 9(3) | Article 10(5) |
Article 9(4) | Article 10(3) |
Article 10(1), first sub-paragraph | Article 7, Annexes II and III |
Article 10(1), second sub-paragraph | Article 8 |
Article 10(2) | Article 7, Annexes II and III |
Article 10(3) | - |
Article 10(4) | - |
Article 10(5) | Article 7, Annexes II and III |
Article 10(6) | Article 12 |
Article 11 | Article 14 |
Article 12 | Article 16 |
Article 13 | Article 18 |
Annex I, point 1 | Annex IV, point 2 |
Annex I, point 2 | Annex V |
Annex II | Annex VI |
Annex III, last paragraph | Article 9(5) |
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys