Chwilio Deddfwriaeth

Commission Directive 2006/63/CEDangos y teitl llawn

Commission Directive 2006/63/CE of 14 July 2006 amending Annexes II to VII to Council Directive 98/57/EC on the control of Ralstonia solanacearum (Smith) Yabuuchi et al.

 Help about what version

Pa Fersiwn

 Help about advanced features

Nodweddion Uwch

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

Mae hon yn eitem o ddeddfwriaeth sy’n deillio o’r UE

Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3

Status:

EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.

Commission Directive 2006/63/CE

of 14 July 2006

amending Annexes II to VII to Council Directive 98/57/EC on the control of Ralstonia solanacearum (Smith) Yabuuchi et al.

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community,

Having regard to Council Directive 98/57/EC of 20 July 1998(1) on the control of Ralstonia solanacearum (Smith) Yabuuchi et al., and in particular Article 11 thereof,

Whereas:

(1) One of the important organisms harmful to potatoes and tomatoes is Ralstonia solanacearum (Smith) Yabuuchi et al., the pathogenic agent of the potato brown rot disease and of bacterial wilt in potatoes and tomatoes (hereinafter referred to as the organism);

(2) The organism still occurs in some parts of the Community;

(3) Directive 98/57/EC has laid down detailed measures to be taken within the Member States against the organism in order to locate it and determine its distribution; prevent its occurrence and spread; and, if found, to prevent its spread and to control it with the aim of eradication;

(4) Since then, there have been significant developments in the understanding of the biology, the detection and identification procedures of the organism; moreover practical experiences gained in controlling the organism calls for review of several technical provisions related to control measures;

(5) As a result of such developments, it appears necessary to review and update the measures included in certain Annexes to Directive 98/57/EC;

(6) As regards the detection and identification procedures, the fluorescent in-situ hybridisation (FISH), a modern detection method, is incorporated. Improvements of the polymerase chain reaction (PCR) method, as well as improvements of various technical elements of the current detection and identification procedure, and methods for the detection and identification of the organism in other host plants than potato, and in water and soil, have also been included;

(7) As regards the technical elements of the control measures, improved provisions are made for: the way of conservation of tested samples in order to ensure trace back of the organism, the elements needed to determine the extent of the probable contamination, the details of the notification of any confirmed presence of the organism and of the relevant contaminated zone, measures to implement in places of production designated as contaminated and within the demarcated zones. In addition, some provisions for tomato have been incorporated in order to take more into account the relevance of this plant as host for the organism;

(8) The measures provided in this Directive are in accordance with the opinion of the Standing Committee on Plant Health.

HAS ADOPTED THIS DIRECTIVE:

Article 1U.K.

Annexes II to VII to Directive 98/57/EC are hereby replaced by the corresponding texts in Annex to this Directive.

Article 2U.K.

1.Member States shall adopt and publish, by 31 March 2007 at the latest, the laws, regulations and administrative provisions necessary to comply with this Directive. They shall forthwith communicate to the Commission the text of these provisions and a correlation table between those provisions and the Directive.

They shall apply those provisions from 1 April 2007.

When Member States adopt those provisions, they shall contain a reference to this Directive or shall be accompanied by such reference on the occasion of their official publication. Member States shall determine how such reference is to be made.

2.Member States shall immediately communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.

Article 3U.K.

This Directive shall enter into force on the third day following its publication in the Official Journal of the European Union.

Article 4U.K.

This Directive is addressed to the Member States.

Done at Brussels, 14 July 2006.

For the Commission

Markos Kyprianou

Member of the Commission

ANNEXU.K.

ANNEX IITEST SCHEME FOR DIAGNOSIS, DETECTION AND IDENTIFICATION OF RALSTONIA SOLANACEARUM (SMITH) YABUUCHI ET AL.

SCOPE OF THE TEST SCHEMEU.K.

The presented scheme describes the various procedures involved in:

(i)

Diagnosis of brown rot in potato tubers and of bacterial wilt in potato, tomato and some other host plants;

(ii)

Detection of Ralstonia solanacearum in samples of potato tubers, potato-, tomato- and other host plants, water and soil;

(iii)

Identification of Ralstonia solanacearum (R. solanacearum).

CONTENTSU.K.

Page
General principles40
SECTION I:Application of the test scheme40
1.Detection scheme for the diagnosis of brown rot and bacterial wilt (R. solanacearum) in potato tubers and potato, tomato or other host plants with symptoms of brown rot or bacterial wilt40
2.Scheme for detection and identification of R. solanacearum in samples of asymptomatic potato tubers43
3.Scheme for detection and identification of R. solanacearum in samples of asymptomatic, potato, tomato or other host plants46
SECTION II:Detailed methods for detection of R. solanacearum in potato tubers and potato, tomato or other host plants with symptoms of brown rot or bacterial wilt48
1.Symptoms48
2.Rapid screening tests48
3.Isolation procedure49
4.Identification tests for R. solanacearum49
SECTION III:1.Detailed methods for detection and identification of R. solanacearum in samples of asymptomatic potato tubers49
1.1.Sample preparation49
1.2.Testing51
2.Detailed methods for detection and identification of R. solanacearum in samples of asymptomatic potato, tomato or other plants51
2.1.Sample preparation51
2.2.Testing52
SECTION IV:1.Scheme for detection and identification of R. solanacearum in water53
2.Methods for detection and identification of R. solanacearum in water55
2.1.Sample preparation55
2.2.Testing55
SECTION V:1.Scheme for detection and identification of R. solanacearum in soil56
2.Methods for detection and identification of R. solanacearum in soil58
2.1.Samples preparation58
2.2.Testing58
SECTION VI:Optimised protocols for detection and identification of R. solanacearum58
ADiagnostic and detection tests58
1.Stem streaming test58
2.Detection of poly-ß-hydroxybutyrate granules58
3.Serological agglutination tests59
4.Selective isolation60
4.1.Selective plating60
4.2.Enrichment procedure60
5.Immunofluorescence test (IF test)61
6.Polymerase chain reaction test (PCR test)64
6.1.DNA purification methods65
(a)Method according to Pastrik (2000)65
(b)Other methods65
6.2.PCR66
6.3.Analysis of the PCR product66
7.Fluorescent in-situ hybridization test (FISH test)67
8.Enzyme Linked ImmunoSorbent Assay (ELISA) tests69
(a)Indirect ELISA69
(b)DASI (Double-Antibody Sandwich Indirect) ELISA70
9.Bioassay test71
BIdentification tests72
1.Nutritional and enzymatic identification tests72
2.IF test72
3.ELISA test73
4.PCR test73
5.FISH test73
6.Fatty acid profiling (FAP)73
7.Strain characterisation methods73
7.1.Biovar determination73
7.2.Genomic fingerprinting74
7.3.PCR methods74
CConfirmation test74
Appendix 1Laboratories involved in optimisation and validation of protocols76
Appendix 2Media for isolation and culture of R. solanacearum77
Appendix 3(A)Commercially available standardised control material79
(B)Preparation of controls80
Appendix 4Buffers for test procedures82
Appendix 5Determination of contamination level in IF and FISH tests85
Appendix 6Validated PCR protocols and reagents86
Appendix 7Validated reagents for FISH test91
Appendix 8Culture conditions for tomato and eggplant93
References94

GENERAL PRINCIPLESU.K.

OptimiseOptimised protocols for the various methods, validated reagents and details for the preparation of test and control materials are provided in the Appendices. A list of the laboratories that were included in optimization and validation of protocols is provided in Appendix 1.

Since the protocols involve detection of a quarantine organism and will include the use of viable cultures of R. solanacearum as control materials, it will be necessary to perform the procedures under suitable quarantined conditions with adequate waste disposal facilities and under the conditions of appropriate licences as issued by the official plant quarantine authorities.

Testing parameters must assure consistent and reproducible detection of levels of R. solanacearum at the set thresholds of the selected methods.

Precise preparation of positive controls is imperative.

Testing according to the required thresholds also implies correct settings, maintenance and calibration of equipment, careful handling and preservation of reagents and all measures to prevent contamination between samples, e.g. separation of positive controls from test samples. Quality control standards must be applied to avoid administrative and other errors, especially concerning labelling and documentation.

A suspected occurrence, as referred to in Article 4(2) of Directive 98/57/EC implies a positive result in diagnostic or screening tests performed on a sample as specified in flow charts below. A positive first screening test (IF test, PCR/FISH, selective isolation) must be confirmed by a second screening test based on a different biological principle.

If the first screening test is positive, then contamination with R. solanacearum is suspected and a second screening test must be done. If the second screening test is positive, than the suspicion is confirmed (suspected occurrence) and the testing according to the scheme must be continued. If the second screening test is negative, then the sample is considered not contaminated with R. solanacearum.

Confirmed presence as referred to in Article 5(1) in Directive 98/57/EC implies the isolation and identification of a pure culture of R. solanacearum with confirmation of pathogenicity.

SECTION IU.K.APPLICATION OF THE TEST SCHEME

1.Detection scheme for the diagnosis of brown rot and bacterial wilt (Ralstonia solanacearum) in potato tubers and potato, tomato or other host plants with symptoms of brown rot or bacterial wilt.U.K.

The testing procedure is intended for potato tubers and plants with symptoms typical or suspect of brown rot or vascular wilt. It involves a rapid screening test, isolation of the pathogen from infected vascular tissue on (selective) medium and, in case of a positive result, identification of the culture as Ralstonia solanacearum.

2.Scheme for detection and identification of Ralstonia solanacearum in samples of asymptomatic potato tubersU.K.
Principle:U.K.

The testing procedure is intended for detection of latent infections in potato tubers. A positive result from at least two screening tests (3), based on different biological principles, must be complemented by the isolation of the pathogen; followed by, in case of isolation of typical colonies, confirmation of a pure culture as R. solanacearum A positive result from only one of the screening tests is not sufficient to consider the sample suspect.

Screening tests and isolation tests must permit detection of 103 to 104 cells/ml of resuspended pellet, included as positive controls in each series of tests.

3.Scheme for detection and identification of Ralstonia solanacearum in samples of asymptomatic potato, tomato or other host plantsU.K.

SECTION IIU.K.DETAILED METHODS FOR DETECTION OF RALSTONIA SOLANACEARUM IN POTATO TUBERS AND POTATO, TOMATO OR OTHER HOST PLANTS WITH SYMPTOMS OF BROWN ROT OR BACTERIAL WILT

1.Symptoms (see website http://forum.europa.eu.int/Public/irc/sanco/Home/main)U.K.
1.1.Symptoms on potatoU.K.

The potato plant. The early stage of infection in the field is recognised by wilting of the leaves towards the top of the plant at high temperatures during the day with recovery at night. In early stages of wilting leaves remain green, but later yellowing and brown necrosis develops. Epinasty also occurs. Wilting of one shoot or whole plants becomes rapidly irreversible and results in the collapse and death of the plant. The vascular tissue of transversely cut stems from wilted plants usually appears brown and a milky bacterial ooze exudes from the cut surface or can be expressed by squeezing. When a cut stem is placed vertically in water, threads of slime will stream from the vascular bundles.

The potato tuber. Potato tubers must be cut transversely close to the heel (stolon end) or longitudinally over the stolon end. The early stage of infection is recognised by a glassy yellow to light brown discolouration of the vascular ring from which a pale cream bacterial ooze emerges spontaneously after some minutes. Later, the vascular discolouration becomes a more distinct brown and necrosis can extend into the parenchymatous tissue. In advanced stages, infection breaks outwards from the heel end and the eyes from which bacterial slime may ooze causing soil particles to adhere. Reddish-brown slightly sunken lesions may appear on the skin due to collapse of vascular tissues internally. Secondary development of fungal and bacterial soft rots is common in the advanced stages of the disease.

1.2.Symptoms on tomatoU.K.

The tomato plant. The first visible symptom is the flaccid appearance of the youngest leaves. Under favourable environmental conditions for the pathogen (soil temperatures of approximately 25 °C; saturated humidity), epinasty and wilting of one side or of the whole plant follows within a few days leading to total plant collapse. Under less favourable conditions (soil temperature below 21 °C), less wilting occurs, but large numbers of adventitious roots may develop on the stem. It is possible to observe watersoaked streaks from the base of the stem which is evidence of necrosis in the vascular system. When the stem is cut crosswise, discoloured brown vascular tissues exude white or yellowish bacterial ooze.

1.3.Symptoms on other hostsU.K.

Solanum dulcamara and S. nigrum plants. Under natural conditions, wilting symptoms are rarely observed in these weed hosts unless soil temperatures exceed 25 °C or inoculum levels are extremely high (e.g. as for S. nigrum growing adjacent to diseased potato or tomato plants). When wilting does occur, the symptoms are as described for tomato. Non-wilting S. dulcamara plants growing with stems and roots in water may show internal light brown discolouration of vascular tissues on transverse section of the stem base or underwater stem parts. Bacteria may ooze from cut vascular tissues or form threads of slime if the cut stem is placed vertically in water, even in the absence of wilting symptoms.

2.Rapid screening testsU.K.

Rapid screening tests may facilitate presumptive diagnosis but are not essential. Use one or more of the following validated tests:U.K.

2.1.Stem streaming testU.K.

(See Section VI.A.1.)

2.2.Detection of poly-ß-hydroxybutyrate (PHB) granulesU.K.

Characteristic PHB granules in the cells of R. solanacearum are visualised by staining heat-fixed smears of bacterial ooze from infected tissue on a microscope slide with Nile Blue A or Sudan Black (See Section VI.A.2.).

2.3.Serological agglutination testsU.K.

(See Section VI.A.3.)

2.4.Other testsU.K.

Further appropriate rapid screening tests include the IF test (see Section VI.A.5.), FISH test (see Section VI.A.7.), ELISA tests (see Section VI.A.8.) and PCR tests (see Section VI.A.6).

3.Isolation procedureU.K.
(a)

Remove ooze or sections of discoloured tissue from the vascular ring in the potato tuber or from the vascular strands in stems of potato, tomato or other wilting host plants. Suspend in a small volume of sterile distilled water or 50mM phosphate buffer (Appendix 4) and leave for 5 to 10 minutes.

(b)

Prepare a series of decimal dilutions of the suspension.

(c)

Transfer 50-100 µl of the suspension and dilutions to a general nutrient medium (NA, YPGA or SPA; see Appendix 2) and/or to Kelman’s tetrazolium medium (Appendix 2) and/or a validated selective medium (e.g. SMSA; see Appendix 2). Spread or streak with an appropriate dilution plating technique. If useful, prepare separate plates with a diluted cell suspension of R. solanacearum biovar 2 as a positive control.

(d)

Incubate the plates for two to six days at 28 °C.

  • On the general nutrient media, virulent isolates of R. solanacearum develop pearly cream-white, flat, irregular and fluidal colonies often with characteristic whorls in the centre. Avirulent forms of R. solanacearum form small round non-fluidal, butyrous colonies which are entirely cream-white.

  • On Kelman’s tetrazolium and SMSA media, the whorls are blood red in colour. Avirulent forms of Ralstonia solanacearum form small round non-fluidal, butyrous colonies which are entirely deep red.

4.Identification tests for R. solanacearum U.K.

Tests to confirm identity of presumptive isolates of R. solanacearum are shown in Section VI.B.

SECTION IIIU.K.

1.Detailed methods for detection and identification of Ralstonia solanacearum in samples of asymptomatic potato tubersU.K.
1.1.Sample preparationU.K.
Note:U.K.
  • The standard sample size is 200 tubers per test. More intensive sampling requires more tests on samples of this size. Larger numbers of tubers in the sample will lead to inhibition or difficult interpretation of the results. However, the procedure can be conveniently applied for samples with less than 200 tubers where fewer tubers are available.

  • Validation of all detection methods described below is based on testing of samples of 200 tubers.

  • The potato extract described below can also be used for detection of the potato ring rot bacterium, Clavibacter michiganensis subsp. sepedonicus.

Optional pre-treatment in advance to sample preparation:

(a)

Incubation of samples at 25 to 30 °C, for up to two weeks before testing, to encourage multiplication of any R. solanacearum populations.

(b)

Wash the tubers. Use appropriate disinfectants (chlorine compounds when PCR-test is to be used in order to remove pathogen DNA) and detergents between each sample. Air dry the tubers. This washing procedure is particularly useful (but not required) for samples with excess soil and if a PCR-test or direct isolation procedure is to be performed.

1.1.1.Remove with a clean and disinfected scalpel or vegetable knife the skin at the heel (stolon) end of each tuber so that the vascular tissues become visible. Carefully cut out a small core of vascular tissue at the heel end and keep the amount of non-vascular tissue to a minimum. (see web site http://forum.europa.eu.int/Public/irc/sanco/Home/main).U.K.

Note: Set aside any (rotting) tubers with suspected brown rot symptoms and test separately.U.K.

If during removal of the heel end core suspect symptoms of brown rot are observed, a visual inspection of this tuber should be done and the tuber cut near the heel end. Any cut tuber with suspected symptoms should be kept for at least two days at room temperature in order to allow suberisation and stored refrigerated (at 4 to 10 °C) under proper quarantine conditions. All tubers including those with suspicioussymptoms should be kept according to Annex III.

1.1.2.Collect the heel end cores in unused disposable containers which can be closed and/or sealed (in case containers are reused they should be thoroughly cleaned and disinfected using chlorine compounds). Preferably, the heel end cores should be processed immediately. If this is not possible, store them in the container, without addition of buffer, refrigerated for not longer than 72 hours or for not longer than 24 hours at room temperature.U.K.

Process the heel end cores by one of the following procedures: either,

(a)

Cover the cores with sufficient volume (approximately 40 ml) of extraction buffer (Appendix 4) and agitate on a rotary shaker (50-100 rpm) for 4 hours below 24 °C or for 16 to 24 hours refrigerated,

or

(b)

Homogenise the cores with sufficient volume (approximately 40 ml) of extraction buffer (Appendix 4), either in a blender (e.g. Waring or Ultra Thurax) or by crushing in a sealed disposable maceration bag (e.g. Stomacher or Bioreba strong guage polythene, 150 mm × 250 mm; radiation sterilised) using a rubber mallet or suitable grinding apparatus (e.g. Homex).

Note: The risk of cross-contamination of samples is high when samples are homogenized using a blender. Take precautions to avoid aerosol generation or spillage during the extraction process. Ensure that freshly sterilised blender blades and vessels are used for each sample. If the PCR test is to be used, avoid carry-over of DNA on containers or grinding apparatus. Crushing in disposable bags and use of disposable tubes is recommended where PCR is to be used.U.K.

1.1.3.Decant the supernatant. If excessively cloudy, clarify either by slow speed centrifugation (at not more than 180 g for 10 minutes at a temperature between 4 to 10 °C) or by vacuum filtration (40 to 100 µm), washing the filter with additional (approximately 10 ml) extraction buffer.U.K.
1.1.4.Concentrate the bacterial fraction by centrifugation at 7 000 g for 15 minutes (or 10 000 g for 10 minutes) at a temperature between 4 to 10 °C and discard the supernatant without disturbing the pellet.U.K.
1.1.5.Resuspend the pellet in 1.5 ml pellet buffer (Appendix 4). Use 500 µl to test for R. solanacearum, 500 µl for Clavibacter michiganensis subsp. sepedonicus and 500 µl for reference purposes. Add sterile glycerol to final concentration of 10 to 25 % (v/v) to the 500 µl of the reference aliquot and to the remaining test aliquot, vortex and store at -16 to -24 °C (weeks) or at -68 to -86 °C (months). Preserve the test aliquots at 4 to 10 °C during testing.U.K.

Repeated freezing and thawing is not advisable.

If transport of the extract is required, ensure delivery in a cool box within 24 to 48 hours.

1.1.6.It is imperative that all R. solanacearum positive controls and samples are treated separately to avoid contamination. This applies to IF slides and to all tests.U.K.
1.2.TestingU.K.

See Flow chart and description of the tests and optimised protocols in the relevant appendices:

  • Selective isolation (see Section VI.A.4.)

  • IF test (see Section VI.A.5.)

  • PCR tests (see Section VI.A.6.)

  • FISH test (see Section VI.A.7.)

  • ELISA tests (see Section VI.A.8.)

  • Bioassay (see Section VI.A.9.)

2.Detailed methods for detection and identification of R. solanacearum in samples of asymptomatic potato, tomato or other host plantsU.K.
2.1.Sample preparationU.K.

Note: For detection of latent R. solanacearum populations it is advised to test composite samples. The procedure can be conveniently applied for composite samples of up to 200 stem parts. Where surveys are performed they should be based on a statistically representative sample of the plant population under investigation.U.K.

2.1.1.Collect 1 to 2 cm stem segments in a closed sterile container according to the following sampling procedures:U.K.

Nursery tomato seedlings: With a clean disinfected knife, remove a 1 cm segment from the base of each stem, just above the soil level.

Field or glasshouse grown tomato plants: With a clean disinfected knife, remove the lowermost side shoot from each plant by cutting just above the joint with the main stem. Remove the lowermost 1cm segment from each side shoot.

Other hosts: With a clean disinfected knife or pruning shears, remove a 1 cm segment from the base of each stem, just above the soil level. In the case of S. dulcamara or other host plants growing in water, remove 1-2 cm sections from underwater stems or stolons with aquatic roots.

When sampling a particular location it is recommended to test a statistically representative sample of at least 10 plants per sampling point of each potential weed host. Pathogen detection will be most reliable during late spring, summer and autumn seasons, although natural infections can be detected all year round in the perennial Solanum dulcamara growing in watercourses. Known hosts include volunteer potato plants (groundkeepers), Solanum dulcamara, S. nigrum, Datura stramonium and other members of the family Solanaceae. Further hosts are Pelargonium spp. and Portulaca oleracea. Some European weed spp. which may potentially harbour R. solanacearum biovar 2/Race 3 populations in roots and/or rhizospheres under specific environmental conditions include Atriplex hastata, Bidens pilosa, Cerastium glomeratum, Chenopodium album, Eupatorium cannabinum, Galinsoga parviflora, Ranunculus scleratus, Rorippa spp, Rumex spp., Silene alba, S. nutans., Tussilago farfarra and Urtica dioica.

Note: Visual examination for internal symptoms (vascular staining or bacterial ooze) can be done at this stage. Set aside any stem segments with symptoms and test separately (See Section II).U.K.

2.1.2.Disinfect stem segments briefly with ethanol 70 % and immediately blot dry on tissue paper. Then process the stem segments by one of the following procedures: either,U.K.
(a)

Cover the segments with sufficient volume (approximately 40 ml) of extraction buffer (Appendix 4) and agitate on a rotary shaker (50 to 100 rpm) for four hours below 24 °C or for 16 to 24 hours refrigerated, or

(b)

Process immediately by crushing the segments in a strong maceration bag (e.g. Stomacher or Bioreba) with an appropriate volume of extraction buffer (Appendix 4) using a rubber mallet or appropriate grinding apparatus (e.g. Homex). If this is not possible, store the stem segments refrigerated for not longer than 72 hours or for not longer than 24 hours at room temperature.

2.1.3.Decant the supernatant after settling for 15 minutes.U.K.
2.1.4.Further clarification of the extract or concentration of the bacterial fraction are not usually required but may be achieved by filtration and/or centrifugation as described in Section III.1.1.3 – 1.1.5.U.K.
2.1.5.Divide the neat or concentrated sample extract into two equal parts. Maintain one half at 4 to 10 °C during testing and store the other half with 10 to 25 % (v/v) sterile glycerol at -16 to -24 °C (weeks) or at -68 to -86 °C (month) in case further testing is required.U.K.
2.2.TestingU.K.

See Flow chart and description of the tests and optimised protocols in the relevant appendices:

  • Selective isolation (see Section VI.A.4.)

  • IF test (see Section VI.A.5.)

  • PCR tests (see Section VI.A.6.)

  • FISH test (see Section VI.A.7.)

  • ELISA tests (see Section VI.A.8.)

  • Bioassay (see Section VI.A.9.)

SECTION IVU.K.

1.Scheme for detection and identification of R. solanacearum in waterU.K.
2.Methods for detection and identification of R. solanacearum in waterU.K.
PrincipleU.K.

The validated detection scheme, described in this section, is applicable for pathogen detection in samples of surface water and can also be applied for testing samples of potato processing or sewage effluents. However, it is important to note that the expected sensitivity of detection will vary with the substrate. Sensitivity of the isolation test is affected by populations of competing saprophytic bacteria which are generally much higher in potato processing and sewage effluents than in surface water. Whereas the scheme below is expected to detect as few as 103 cells per litre in surface water the sensitivity of detection in potato processing or sewage effluents is likely to be significantly lower. For this reason, it is recommended to test effluents after any purification treatments (e.g. sedimentation or filtration) during which saprophytic bacterial populations are reduced. The limitations in sensitivity of the test scheme should be considered when assessing the reliability of any negative results obtained. Whereas this scheme has been successfully used in survey work to determine presence or absence of the pathogen in surface water, its limitations should be realised when used in similar surveys of potato processing or sewage effluents.

2.1.Sample preparationU.K.
Note:U.K.
  • Detection of R. solanacearum in surface water is most reliable during late spring, summer and autumn seasons when water temperatures exceed 15 °C.

  • Repeated sampling at different times in the above mentioned period at designated sampling points will increase the reliability of detection by reducing the effects of climatic variation.

  • Take into account the effects of heavy rainfall and the geography of the watercourse to avoid extensive dilution effects that may obscure presence of the pathogen.

  • Take surface water samples in the vicinity of host plants if these hosts are present.

2.1.1.At selected sampling points, collect water samples by filling disposable sterile tubes or bottles at a depth if possible below 30 cm and within 2 m from the bank. For processing and sewage effluents, collect samples from the point of effluent discharge. Sample sizes up to 500 ml per sampling point are recommended. If smaller samples are preferred, it is advisable to take samples on at least three occasions per sampling point, each sample consisting of two replicated sub-samples of at least 30 ml. For intensive survey work, select at least three sampling points per 3 km of watercourse and ensure that tributaries entering the watercourse are also sampled.U.K.
2.1.2.Transport samples in cool dark conditions (4 to 10 °C) and test within 24 hours.U.K.
2.1.3.If required, the bacterial fraction may be concentrated using one of the following methods:U.K.
(a)

Centrifuge 30 to 50 ml sub-samples at 10 000 g for 10 minutes (or 7 000 g for 15 minutes) preferably at 4 to 10 °C, discard the supernatant and resuspend the pellet in 1 ml pellet buffer (Appendix 4).

(b)

Membrane filtration (minimum pore size 0,45 µm) followed by washing the filter in 5 to 10 ml pellet buffer and retention of the washings. This method is suitable for larger volumes of water containing low numbers of saprophytes.

Concentration is usually not advisable for samples of potato processing or sewage effluent since increased populations of competing saprophytic bacteria will inhibit detection of Ralstonia solanacearum.

2.2.TestingU.K.

See flow chart and description of the tests in the relevant appendices.

SECTION VU.K.

1.Scheme for detection and identification of R. solanacearum in soilU.K.
2.Methods for detection and identification of R. solanacearum in soilU.K.
PrinciplesU.K.

The validated detection scheme, described in this section, is applicable for pathogen detection in soil samples but can also be used to test samples of solid potato processing waste or sewage sludge. However, it should be noted that these methods are insufficiently sensitive to guarantee detection of low and/or irregularly dispersed populations of Ralstonia solanacearum that may occur in naturally infested samples of these substrates.

The limitations in sensitivity of this test scheme should be considered when assessing the reliability of any negative results obtained and also when used in surveys to determine presence or absence of the pathogen in soils or sludges. The most reliable test for presence of the pathogen in a field soil is to plant a susceptible host and monitor it for infection, but even with this method low levels of contamination will escape detection.

2.1.Sample preparationU.K.
2.1.1.Sampling of field soil should follow standard principals used for nematode sampling. Collect 0,5 to 1 kg of soil per sample from 60 sites per 0,3 ha from a depth of 10 to 20 cm (or in a grid of 7 x 7 metres) If the pathogen is suspected to be present, increase the number of collection points to 120 per 0,3 ha. Maintain samples at 12 to 15 °C prior to testing. Sample potato processing and sewage sludges by collecting a total of 1 kg from sites representing the total volume of sludge to be tested. Mix each sample well before testing.U.K.
2.1.2.Disperse sub-samples of 10 to 25 g of soil or sludge by rotary shaking (250 rpm) in 60 to 150 ml extraction buffer (Appendix 4) for up to two hours. If required, addition of 0,02 % sterile Tween-20 and 10 to 20 g sterile gravel may assist dispersion.U.K.
2.1.3.Maintain the suspension at 4 °C during testing.U.K.
2.2.TestingU.K.

See flow chart and description of the tests in the relevant appendices.

SECTION VIU.K.OPTIMISED PROTOCOLS FOR DETECTION AND IDENTIFICATION OF R. SOLANACEARUM

A.DIAGNOSTIC AND DETECTION TESTSU.K.
1.Stem streaming testU.K.

The presence of R. solanacearum in stems of wilting potato, tomato or other host plants can be indicated by the following simple presumptive test: Cut the stem just above the soil level. Suspend the cut surface in a tube of clean water. Observe for characteristic spontaneous streaming of threads of bacterial slime from the cut vascular bundles after a few minutes.

2.Detection of poly-ß-hydroxybutyrate granulesU.K.
1.

Prepare a smear of bacterial ooze from infected tissue or from a 48-hour culture on YPGA or SPA medium (Appendix 2) on a microscope slide.

2.

Prepare positive control smears of a biovar 2 strain of R. solanacearum and, if considered useful, a negative control smear of a known PHB negative sp.

3.

Allow to air dry and pass the lower surface of each slide rapidly above a flame to fix the smears.

4.

Stain preparation with either Nile Blue or Sudan Black and observe microscopically as described below:

Nile blue test:U.K.
(a)

Flood each slide with 1 % aquous solution of Nile Blue A and incubate for 10 minutes at 55 °C.

(b)

Drain off the staining solution. Wash briefly in gently running tap water. Remove excess water with tissue paper.

(c)

Flood the smear with 8 % aqueous acetic acid and incubate for one minute at ambient temperature.

(d)

Wash briefly in gently running tap water. Remove excess water with tissue paper.

(e)

Re-moisten with a drop of water and apply a coverslip.

(f)

Examine the stained smear with an epifluorescence microscope at 450 nm under oil immersion at a magnification of 600 to 1 000 using an oil- or water-immersion objective.

(g)

Observe for bright orange fluorescence of PHB granules. Also observe under transmitted normal light to ensure that the granules are intracellular and that cell morphology is typical of R. solanacearum.

Sudan Black test:U.K.
(a)

Flood each slide with 0,3 % Sudan Black B solution in 70 % ethanol and incubate for 10 minutes at ambient temperature.

(b)

Drain off the staining solution and wash briefly in tap water, removing excess water with tissue paper.

(c)

Dip the slides briefly in xylol and blot dry on tissue paper. Caution: Xylol is harmful, take necessary safety precautions and work in a fume cupboard.

(d)

Flood the slides with 0,5 % (w/v) aqueous safranin and leave for 10 seconds at ambient temperature. Caution: Safranin is harmful, take necessary safety precautions and work in a fume cupboard.

(e)

Wash in gently running tap water, blot dry on tissue paper and apply a coverslip.

(f)

Examine stained smears with a light microscope using transmitted light under oil immersion at a magnification of 1 000 using an oil-immersion objective.

(g)

Observe for blue-black staining of PHB granules in cells of R. solanacearum with pink-stained cell walls.

3.Serological agglutination testsU.K.

Agglutination of R. solanacearum cells in bacterial ooze or symptomatic tissue extracts is best observed using validated antibodies (see Appendix 3) labelled with appropriate coloured markers such as red Staphylococcus aureus cells or coloured latex particles. If using a commercially available kit (see Appendix 3), follow the manufacturers instructions. Otherwise perform the following procedure:

(a)

Mix drops of a suspension of labelled antibody and bacterial ooze (approximately 5 µl each) on windows of multiwell test slides.

(b)

Prepare positive and negative controls using suspensions of R. solanacearum biovar 2 and a heterologous strain.

(c)

Observe for agglutination in positive samples after gentle mixing for 15 seconds.

4.Selective isolationU.K.
4.1.Selective platingU.K.

Note: Before using this method for the first time, perform preliminary tests to ensure reproducible detection of 103 to 104 colony-forming units of R. solanacearum per ml added to extracts from samples which previously tested negative.U.K.

Use an appropriately validated selective medium such as SMSA (as modified by Elphinstone et al., 1996; see Appendix 2).

Care is required to differentiate R. solanacearum from other bacteria able to develop colonies on the medium. Furthermore, colonies of R. solanacearum may show atypical morphology if plates are overcrowded or antagonistic bacteria are also present. Where effects of competition or antagonism are suspected, the sample should be re-tested using a different test.

Highest sensitivity of detection by this method can be expected when using freshly prepared sample extracts. However, the method is also applicable for use with extracts which have been stored under glycerol at -68 to -86 °C.

As positive controls, prepare decimal dilutions from a suspension of 106 cfu per ml of a virulent biovar 2 strain of R. solanacearum (e.g. NCPPB 4156 = PD 2762 = CFBP 3857). To avoid any possibility of contamination, prepare positive controls totally separately from samples to be tested.

For each newly prepared batch of a selective medium its suitability for growth of the pathogen should be tested before it is used to test routine samples.

Test control material in an identical manner as the sample(s).

4.1.1.Perform an appropriate dilution plating technique aiming to ensure that any background saprophytic colony-forming populations are diluted out. Spread 50 - 100 µl per plate of sample extract and each dilution.U.K.
4.1.2.Incubate plates at 28 °C. Read plates after 48 hours and daily thereafter up to six days. Typical R. solanacearum colonies on SMSA medium are milky white, flat, irregular and fluidal and after three days incubation develop pink to blood-red coloration in the centre with internal streaking or whorling. (see website http://forum.europa.eu.int/Public/irc/sanco/Home/main).U.K.

Note: Atypical colonies of R. solanacearum sometimes form on this medium. These may be small, round, entirely red in colour and non-fluidal or only partially fluidal and therefore difficult to distinguish from saprophytic colony-forming bacteria.U.K.

4.1.3.Purify presumptive R. solanacearum colonies after streaking or dilution plating onto a general nutrient medium to obtain isolated colonies (see Appendix 2).U.K.
4.1.4.Store cultures short-term in sterile water (pH 6 to 8, chlorine free) at room temperature in the dark, or long term in a suitable cryoprotectant medium at -68 to -86 °C or lyophilised.U.K.
4.1.5.Identify presumptive cultures (see Section VI.B.) and perform a pathogenicity test (see Section VI. C).U.K.
Interpretation of selective plating test resultsU.K.

The selective plating test is negative if no bacterial colonies are observed after six days or if no presumptive colonies typical of R. solanacearum are found, provided that no inhibition is suspected due to competition or antagonism by other bacteria and that typical R. solanacearum colonies are found in the positive controls.

The selective plating test is positive if presumptive R. solanacearum colonies are isolated.

4.2.Enrichment procedureU.K.

Use a validated enrichment medium such as modified Wilbrink broth (see Appendix 2). U.K.

This procedure can be used to selectively increase R. solanacearum populations in sample extracts and increase sensitivity of detection. The procedure also effectively dilutes inhibitors of the PCR reaction (1:100). It should be noted, however, that enrichment of R. solanacearum can fail due to competition or antagonism by saprophytic organisms which are often simultaneously enriched. For this reason, isolation of R.solanacearum from enriched broth cultures may be difficult. In addition, since populations of serologically related saprophytes can be increased, the use of specific monoclonal antibodies rather than polyclonal antibodies is recommended where the ELISA test is to be used.

4.2.1.For enrichment-PCR, transfer 100 µl of sample extract into 10 ml of enrichment broth (Appendix 2) previously aliquoted into DNA-free tubes or flasks. For enrichment-ELISA, higher proportions of sample extract to broth can be used (e.g. 100 µl in 1,0 ml of enrichment broth).U.K.
4.2.2.Incubate for 72 hours at 27 to 30 °C in shaking culture or static culture with caps loosely- fitted to permit aeration.U.K.
4.2.3.Mix well before using in ELISA or PCR tests.U.K.
4.2.4.Treat enriched broth in an identical manner as the sample(s) in the above tests.U.K.

Note: If inhibition of enrichment of R. solanacearum is anticipated, due to high populations of certain competing saprophytic bacteria, enrichment of sample extracts before any centrifugation or other concentration steps may give better results.U.K.

5.IF TestU.K.
PrincipleU.K.

The use of the IF test as the principal screening test is recommended because of its proven robustness to achieve the required thresholds.

When the IF test is used as the principal screening test and the IF reading is positive, the Isolation, PCR or FISH test must be performed as a second screening test. When the IF test is used as the second screening test and the IF reading is positive, further testing according to the flow scheme is required to complete the analysis.

Note: Use a validated source of antibodies to R. solanacearum (see web site http://forum.europa.eu.int/Public/irc/sanco/Home/main). It is recommended that the titre is determined for each new batch of antibodies. The titre is defined as the highest dilution at which optimum reaction occurs when testing a suspension containing 105 to 106 cells per ml of the homologous strain of R. solanacearum and using an appropriate fluorescein isothiocyanate (FITC) conjugate according to the manufacturer’s recommendations. Validated polyclonal antisera all had an IF titre of at least 1:2 000. During testing, the antibodies should be used at a working dilution(s) close to or at the titre.U.K.

The test should be performed on freshly-prepared sample extracts. If necessary, it can be successfully performed on extracts stored at -68 to -86 °C under glycerol. Glycerol can be removed from the sample by addition of 1 ml pellet buffer (Appendix 4), re-centrifugation for 15 minutes at 7 000 g and re-suspension in an equal volume of pellet buffer. This is often not necessary, especially if samples are fixed to the slides by flaming.

Prepare separate positive control slides of the homologous strain or any other reference strain of R. solanacearum, suspended in potato extract, as specified in Appendix 3 B, and optionally in buffer.

Naturally infected tissue (maintained by lyophilisation or freezing at -16 to -24 °C) should be used where possible as a similar control on the same slide.

As negative controls, aliquots of sample extract which previously tested negative for R. solanacearum can be used.

Standardised positive and negative control materials available for use with this test are listed in Appendix 3.

Use multiwell microscope slides with preferably 10 windows of at least 6 mm diameter.

Test control material in an identical manner as the sample(s).

5.1.Prepare the test slides by one of the following procedures:U.K.
(i)

For pellets with relatively little starch sediment:

Pipette a measured standard volume (15 µl is appropriate for 6 mm window diameter – scale up volume for larger windows) of a 1/100 dilution of the resuspended potato pellet onto the first window. Subsequently pipette a similar volume of undiluted pellet (1/1) onto the remaining windows on the row. The second row can be used as duplicate or for a second sample as presented in Figure 1.

(ii)

For other pellets:

Prepare decimal dilutions (1/10, 1/100) of the resuspended pellet in pellet buffer. Pipette a measured standard volume (15 µl is appropriate for 6 mm window diameter – scale up volume for larger windows) of the resuspended pellet and each dilution on a row of windows. The second row can be used as duplicate or for a second sample as presented in Figure 2.

5.2.Dry the droplets at ambient temperature or by warming to temperatures of 40 to 45 °C. Fix the bacterial cells to the slide either by heating (15 minutes at 60 °C), flaming, with 95 % ethanol or according to specific instructions from the suppliers of the antibodies.U.K.

If necessary, fixed slides may then be stored frozen in a desiccated box for as little time as necessary (up to a maximum of three months) prior to further testing.

5.3.IF procedureU.K.
(i)

According to test slide preparation in 5.1(i):

Prepare a set of twofold dilutions The first well should have 1/2 of the titre (T/2), the others 1/4 of the titre (T/4), 1/2 of the titre (T/2), the titre (T) and twice the titre (2T).

(ii)

According to test slide preparation in 5.1(ii):

Prepare the working dilution (WD) of the antibody in IF buffer. The working dilution affects the specificity.

Figure 1.
Preparation of the test slide according to 5.1(i) and 5.3(i)
Dilutions of resuspended pellet
1/1001/11/11/11/1Dilution of resuspended pellet
(T = titre)T/2T/4T/2T2TTwofold dilutions of antiserum/antibody
Sample 1
12345
Duplicate of sample1 or sample 2
678910
Figure 2.
Preparation of the test slide according to 5.1(ii) and 5.3(ii).
Working dilution of antiserum/antibody
1/11/101/100emptyemptyDecimal dilution of resuspended pellet
Sample 1
12345
Duplicate of sample 1 or sample 2
678910
5.3.1.Arrange the slides on moist tissue paper. Cover each test window completely with the antibody dilution(s). The volume of antibody applied on each window must be at least the volume of extract applied.U.K.

The following procedure should be carried out in the absence of specific instructions from the suppliers of the antibodies:

5.3.2.Incubate the slides on moist paper under a cover for 30 minutes at ambient temperature (18 to 25 °C).U.K.
5.3.3.Shake the droplets off each slide and rinse carefully with IF buffer. Wash by submerging for five minutes in IF buffer-Tween (Appendix 4) and subsequently in IF buffer. Avoid causing aerosols or droplet transfer that could result in cross-contamination. Carefully remove excess moisture by blotting gently.U.K.
5.3.4.Arrange the slides on moist paper. Cover the test windows with the dilution of FITC conjugate used to determine the titre. The volume of conjugate applied on the windows must be identical to the volume of antibody applied.U.K.
5.3.5.Incubate the slides on moist paper under a cover for 30 minutes at ambient temperature (18 to 25 °C).U.K.
5.3.6.Shake the droplets of conjugate off the slide. Rinse and wash as before (5.3.3).U.K.

Carefully remove excess moisture.

5.3.7.Pipette 5 - 10 µl of 0,1M phosphate-buffered glycerol (Appendix 4) or a commercially antifading mountant on each window and apply a coverslip.U.K.
5.4.Reading the IF test:U.K.
5.4.1Examine test slides on an epifluorescence microscope with filters suitable for excitation of FITC, under oil or water immersion at a magnification of 500-1 000. Scan windows across two diameters at right angles and around the perimeter. For samples showing no or low number of cells observe at least 40 microscope fields.U.K.

Check the positive control slide first. Cells must be bright fluorescent and completely stained at the determined antibody titre or working dilution. The IF test (Section VI.A.5.) must be repeated if the staining is aberrant.

5.4.2.Observe for bright fluorescing cells with characteristic morphology of R. solanacearum in the test windows of the test slides (see website http://forum.europa.eu.int/Public/irc/sanco/Home/main). The fluorescence intensity must be equivalent to the positive control strain at the same antibody dilution. Cells with incomplete staining or with weak fluorescence must be disregarded.U.K.

If any contamination is suspected the test must be repeated. This may be the case when all slides in a batch show positive cells due to the contamination of buffer or if positive cells are found (outside of the slide windows) on the slide coating.

5.4.3.There are several problems inherent to the specificity of the immunofluorescence test. Background populations of fluorescing cells with atypical morphology and cross reacting saprophytic bacteria with size and morphology similar to R. solanacearum are likely to occur in potato heel end core and stem segment pellets.U.K.
5.4.4.Consider only fluorescing cells with typical size and morphology at the titre or working dilution of the antibodies as in 5.3.U.K.
5.4.5.Interpretation of the IF reading:U.K.
(i)

If bright fluorescing cells with characteristic morphology are found, estimate the average number of typical cells per microscope field and calculate the number of typical cells per ml of resuspended pellet (Appendix 5).

The IF reading is positive for samples with at least 5 × 103 typical cells per ml of resuspended pellet. The sample is considered potentially contaminated and further testing is required.

(ii)

The IF reading is negative for samples with less than 5 × 103 cells per ml of resuspended pellet and the sample is considered negative. Further testing is not required.

6.PCR testsU.K.
PrinciplesU.K.

When the PCR test is used as the principal screening test and found to be positive, isolation or IF must be performed as a second compulsory screening test. When PCR is used as the second screening test and found to be positive, further testing according to the flow scheme is required to complete the diagnosis.

Full exploitation of this method as principal screening test is only recommended when specialised expertise has been acquired.

Note: Preliminary testing with this method should permit reproducible detection of 103 to 104 cells of R. solanacearum per ml added to sample extracts which previously tested negative. Optimisation experiments may be required to achieve maximum levels of sensitivity and specificity in all laboratories.U.K.

Use validated PCR reagents and protocols (see Appendix 6). Preferably select a method with an internal control.

Use appropriate precautions to avoid contamination of sample with target DNA. The PCR test should be performed by experienced technicians, in dedicated molecular biology laboratories, in order to minimise the possibility of contamination with target DNA.

Negative controls (for DNA extraction and PCR procedures) should always be handled as final samples in the procedure, to make evident whether any carry over of DNA has occurred.

The following negative controls should be included in the PCR test:

  • Sample extract that previously tested negative for R. solanacearum,

  • Buffer controls used for extracting the bacterium and the DNA from the sample,

  • PCR-reaction mix.

The following positive controls should be included:

  • Aliquots of resuspended pellets to which R. solanacearum has been added (preparation see Appendix 3 B).

  • A suspension of 106 cells per ml of R. solanacearum in water from a virulent isolate (e.g. NCPPB 4156 = PD 2762 = CFBP 3857; see Appendix 3 B).

  • If possible use also DNA extracted from positive control samples in the PCR test.

To avoid potential contamination prepare positive controls in a separate environment from samples to be tested.

Sample extracts should be as free as possible from soil. It could therefore, in certain cases, be advisible to prepare extracts from washed potatoes if PCR protocols are to be used.

Standardized positive and negative control material available for use with this test are listed in Appendix 3).

6.1.DNA purification methodsU.K.

Use positive and negative control samples as described above (see Appendix 3).U.K.

Test control material in an identical manner as the sample(s).

A variety of methods are available for purification of target DNA from complex sample substrates, thus removing inhibitors of PCR and other enzymatic reactions and concentrating target DNA in the sample extract. The following method has been optimised for use with the validated PCR methods shown in Appendix 6.

(a)Method according to Pastrik (2000)U.K.
1)

Pipette 220 µl of lysis buffer (100 mM NaCl, 10 mM Tris-HCl [pH 8,0], 1 mM EDTA [pH 8,0]) into a 1,5 ml Eppendorf tube.

2)

Add 100 µl sample extract and place in a heating block or water bath at 95 °C for 10 min.

3)

Put tube on ice for 5 min.

4)

Add 80 µl Lysozyme stock solution (50 mg Lysozyme per ml in 10 mM Tris HCl, pH 8,0) and incubate at 37 °C for 30 min.

5)

Add 220 µl of Easy DNA® solution A (Invitrogen), mix well by vortexing and incubate at 65 °C for 30 min.

6)

Add 100 µl of Easy DNA® solution B (Invitrogen), vortex vigorously until the precipitate runs freely in the tube and the sample is uniformly viscous.

7)

Add 500 µl of chloroform and vortex until the viscosity decreases and the mixture is homogeneous.

8)

Centrifuge at 15 000 g for 20 min at 4 °C to separate phases and form the interphase.

9)

Transfer the upper phase into a fresh Eppendorf tube.

10)

Add 1 ml of 100 % ethanol (-20 °C) vortex briefly and incubate on ice for 10 min.

11)

Centrifuge at 15 000 g for 20 min at 4 °C and remove ethanol from pellet.

12)

Add 500 µl 80 % ethanol (-20 °C) and mix by inverting the tube.

13)

Centrifuge at 15 000 g for 10 min at 4 °C, save the pellet and remove ethanol.

14)

Allow the pellet to dry in air or in a DNA speed vac.

15)

Resuspend the pellet in 100 µl sterile UPW and leave at room temperature for at least 20 minutes.

16)

Store at -20 °C until required for PCR.

17)

Spin down any white precipitate by centrifugation and use 5 µl of the supernatant containing DNA for the PCR.

(b)Other methodsU.K.

Other DNA extraction methods, e.g. Qiagen DNeasy Plant Kit, could be applied providing that they are proven to be equally as effective in purifying DNA from control samples containing 103 to 104 pathogen cells per ml.

6.2.PCRU.K.
6.2.1.Prepare test and control templates for PCR according to the validated protocols (Section VI.A.6.). Prepare one decimal dilution of sample DNA extract (1:10 in UPW).U.K.
6.2.2.Prepare the appropriate PCR reaction mix in a contamination-free environment according to the published protocols (Appendix 6). Where possible, it is recommended to use a multiplex PCR protocol that also incorporates an internal PCR control.U.K.
6.2.3.Add 2-5 µl of DNA extract per 25 µl PCR reaction in sterile PCR tubes according to the PCR protocols, (see Appendix 6).U.K.
6.2.4.Incorporate a negative control sample containing only PCR reaction mix and add the same source of UPW as used in the PCR mix in place of sample.U.K.
6.2.5.Place tubes in the same thermal cycler which was used in preliminary testing and run the appropriately optimised PCR programme (Appendix 6).U.K.
6.3.Analysis of the PCR productU.K.
6.3.1.Resolve PCR amplicons by agarose gel electrophoresis. Run at least 12 µl of amplified DNA reaction mixture from each sample mixed with 3 µl loading buffer (Appendix 6) in 2,0 % (w/v) agarose gels in tris-acetate-EDTA (TAE) buffer (Appendix 6) at 5 to 8 V per cm. Use an appropriate DNA marker, e.g. 100 bp ladder.U.K.
6.3.2.Reveal DNA bands by staining in ethidium bromide (0,5 mg per L) for 30 to 60 minutes taking appropriate precautions for handling this mutagen.U.K.
6.3.3.Observe stained gel under short wave UV transillumination (λ = 302 nm) for amplified PCR products of the expected size (Appendix 6) and document.U.K.
6.3.4.For all new findings/cases verify authenticity of the PCR amplicon by performing restriction enzyme analysis on a sample of the remaining amplified DNA by incubating at the optimum temperature and time with an appropriate enzyme and buffer (see Appendix 6). Resolve the digested fragments by agarose gel electrophoresis as before and observe characteristic restriction fragment pattern under UV transillumination after ethidium bromide staining and compare with the undigested and digested positive control.U.K.
Interpretation of the PCR test result:U.K.

The PCR test is negative if the R. solanacearum-specific PCR amplicon of expected size is not detected for the sample in question but is detected for all positive control samples (in case of multiplex PCR with plant specific internal control primers: a second PCR-product of expected size must be amplified with the sample in question).

The PCR test is positive if the R. solanacearum-specific PCR amplicon of expected size and restriction pattern (when required) is detected, providing that it is not amplified from any of the negative control samples. Reliable confirmation of a positive result can also be obtained by repeating the test with a second set of PCR primers (Appendix 6).

Note: Inhibition of the PCR may be suspected if the expected amplicon is obtained from the positive control sample containing R. solanacearum in water but negative results are obtained from positive controls with R. solanacearum in potato extract. In multiplex PCR protocols with internal PCR controls, inhibition of the reaction is indicated when neither of the two amplicons are obtained.U.K.

Contamination may be suspected if the expected amplicon is obtained from one or more of the negative controls.

7.FISH testU.K.
PrincipleU.K.

When the FISH test is used as the first screening test and found to be positive, Isolation or the IF test must be performed as a second compulsory screening test. When the FISH test is used as the second screening test and found to be positive, further testing according to the flow scheme is required to complete the diagnosis.

Note: Use validated R. solanacearum-specific oligo-probes (see Appendix 7). Preliminary testing with this method should permit reproducible detection of at least 103 to 104 cells of R. solanacearum per ml added to sample extracts which previously tested negative.U.K.

The following procedure should preferably be performed on freshly prepared sample extract but can also be successfully performed on sample extract that has been stored under glycerol at -16 to -24 or -68 to -86 °C.

As negative controls, use aliquots of sample extract that previously tested negative for R. solanacearum.

As positive controls prepare suspensions containing 105 to 106 cells per ml of R. solanacearum biovar 2 (e.g. strain NCPPB 4156 = PD 2762 = CFBP 3857, see Appendix 3) in 0,01M phosphate buffer (PB) from a 3 to 5 day culture). Prepare separate positive control slides of the homologous strain or any other reference strain of R. solanacearum, suspended in potato extract, as specified in Appendix 3 B.

The use of the FITC-labelled eubacterial oligo-probe offers a control for the hybridisation process, since it will stain all eubacteria that are present in the sample.

Standardized positive and negative control material available for use with this test are listed in Appendix 3A).

Test control material in an identical manner as the sample(s).

7.1.Potato extract fixationU.K.

The following protocol is based upon Wullings et al. (1998):U.K.

7.1.1.Prepare fixative solution (see Appendix 7).U.K.
7.1.2.Pipette 100 µl of each sample extract into an Eppendorf tube and centrifuge for 7 minutes at 7 000 g.U.K.
7.1.3.Remove the supernatant and dissolve the pellet in 200 µl of fixative prepared < 24 hours previously. Vortex and incubate for one hour in the refrigerator.U.K.
7.1.4.Centrifuge for 7 minutes at 7 000 g, remove the supernatant and resuspend the pellet in 75 µl 0,01M PB (see Appendix 7).U.K.
7.1.5.Spot 16 µl of the fixed suspensions onto a clean multitest slide as shown in Fig. 7.1. Applying two different samples per slide, undiluted and use 10 µl to make a 1:100 dilution (in 0,01 M PB). The remaining sample solution (49 µl) can be stored at -20 °C after addition of one volume of 96 % ethanol. In case the FISH assay requires repeating, remove the ethanol by centrifugation and add an equal volume of 0,01 PB (mix by vortexing).U.K.
Fig. 7.1
Layout for FISH slide
Sample 1BlankBlankBlankSample 2
window 1window 2window 3window 4window 5
Sample 1BlankBlankBlankSample 2
window 6window 7window 8window 9window 10
Coverslip 1Coverslip 2
7.1.6.Air-dry the slides (or on slide dryer at 37 °C) and fix them by flaming.U.K.

At this stage the procedure may be interrupted and the hybridisation continued the following day. Slides should be stored dust-free and dry at room temperature.

7.2.HybridisationU.K.
7.2.1.Dehydrate the cells in a graded ethanol series of 50 %, 80 % and 96 % for one minute each. Air dry the slides in a slide-holder.U.K.
7.2.2.Prepare a moist incubation chamber by covering the bottom of an air-tight box with tissue or filter paper soaked in 1x hybmix (Appendix 7). Pre-incubate the box in the hybridisation oven at 45 °C for at least 10 minutes.U.K.
7.2.3.Apply 10 μl of hybridisation solution (Appendix 7) to eight windows (windows 1, 2, 4, 5, 6, 7, 9 and 10; see Fig 7.1) of each slide leaving the two centre windows (3 and 8) empty.U.K.
7.2.4.Apply coverslips (24 × 24 mm) to the first and last four windows without trapping air. Place the slides in the pre-warmed moist chamber and hybridise for five hours in the oven at 45 °C in the dark.U.K.
7.2.5.Prepare three beakers containing 1 l of Milli Q (molecular grade) water, 1 l of 1x hybmix (334 ml 3x hybmix and 666 ml Milli Q water) and 1 l of 1/8x hybmix (42 ml 3x hybmix and 958 ml Milli Q water). Pre-incubate each in a waterbath at 45 °C.U.K.
7.2.6.Remove the coverslips from the slides and place the slides in a slide holder.U.K.
7.2.7.Wash away excess probe by incubation for 15 minutes in the beaker with 1x hybmix at 45 °C.U.K.
7.2.8.Transfer the slide holder to 1/8 hybmix washing solution and incubate for a further 15 minutes.U.K.
7.2.9.Dip the slides briefly in Milli Q water and place them on filter paper. Remove excess moisture by covering the surface gently with filter paper. Pipette 5 to 10 μl of anti-fading mountant solution (e.g. Vectashield, Vecta Laboratories, CA, USA or equivalent) on each window and apply a large coverslip (24 × 60 mm) over the whole slide.U.K.
7.3.Reading the FISH testU.K.
7.3.1.Observe the slides immediately with a microscope fitted for epifluorescence microscopy at 630 or 1 000 × magnification under immersion oil. With a filter suitable for fluorescein isothiocyanate (FITC) eubacterial cells (including most gram negative cells) in the sample are stained fluorescent green. Using a filter for tetramethylrhodamine-5-isothiocyanate, Cy3-stained cells of R. solanacearum appear fluorescent red. Compare cell morphology with that of the positive controls. Cells must be bright fluorescent and completely stained The FISH test (Section VI.A.7.) must be repeated if the staining is aberrant. Scan windows across two diameters at right angles and around the perimeter. For samples showing no or low number of cells observe at least 40 microscope fields.U.K.
7.3.2.Observe for bright fluorescing cells with characteristic morphology of R. solanacearum in the test windows of the test slides (see web site http://forum.europa.eu.int/Public/irc/sanco/Home/main). The fluorescence intensity must be equivalent or better than that of the positive control strain. Cells with incomplete staining or with weak fluorescence must be disregarded.U.K.
7.3.3.If any contamination is suspected the test must be repeated. This may be the case when all slides in a batch show positive cells due to the contamination of buffer or if positive cells are found (outside of the slide windows) on the the slide coating.U.K.
7.3.4.There are several problems inherent to the specificity of the FISH test. Background populations of fluorescing cells with atypical morphology and cross reacting saprophytic bacteria with size and morphology similar to R. solanacearum may occur, although much less frequent as in the IF test, in potato heel end core and stem segment pellets.U.K.
7.3.5.Consider only fluorescing cells with typical size and morphology.U.K.
7.3.6.Interpretation of the FISH test result:U.K.
(i)

Valid FISH test results are obtained if bright green fluorescent cells of size and morphology typical of R. solanacearum are observed using the FITC filter and bright red fluorescent cells using the rhodamine filter in all positive controls and not in any of the negative controls. If bright fluorescing cells with characteristic morphology are found, estimate the average number of typical cells per microscope field and calculate the number of typical cells per ml of resuspended pellet (Appendix 4). Samples with at least 5 × 103 typical cells per ml of resuspended pellet are considered potentially contaminated. Further testing is required. Samples with less than 5 × 103 typical cells per ml of resuspended pellet are considered negative.

(ii)

The FISH test is negative if bright red fluorescent cells with size and morphology typical of R. solanacearum are not observed using the rhodamine filter, provided that typical bright red fluorescent cells are observed in the positive control preparations when using the rhodamine filter.

8.ELISA testsU.K.
PrincipleU.K.

ELISA can only be used as an optional test in addition to IF, PCR or FISH due to a relatively low sensitivity of this test. When DAS ELISA is used enrichment and the use of monoclonal antibodies are compulsory (see web site http://forum.europa.eu.int/Public/irc/sanco/Home/main). Enrichment of the samples before using ELISA may be useful in order to increase the sensitivity of the test, but it can fail due to competition by other organisms in the sample.

Note: Use an validated source of antibodies to R. solanacearum (see web site http://forum.europa.eu.int/Public/irc/sanco/Home/main) It is recommended that the titre is determined for each new batch of antibodies. The titre is defined as the highest dilution at which optimum reaction occurs when testing a suspension containing 105 to 106 cells per ml of the homologous strain of R. solanacearum and using appropriate secondary antibody conjugates according to the manufacturer’s recommendations. During testing, the antibodies should be used at a working dilution close to or at the titre of the commercial formulation.U.K.

Determine the titre of the antibodies on a suspension of 105 to 106 cells per ml of the homologous strain of R. solanacearum.

Include a sample extract that previously tested negative for R. solanacearum and a suspension of a non-cross reacting bacterium in phosphate buffered saline (PBS) as negative controls.

As positive control use aliquots of sample extract, that previously tested negative, mixed with 103 to 104 cells per ml of R. solanacearum biovar 2 (e.g. strain NCPPB 4156 = PD 2762 = CFBP 3857, see Appendix 2 A and B). For comparison of results on each plate use a standard suspension of 105 to 106 cells per ml in PBS of R. solanacearum. Ensure positive controls are well separated on the microtitre plate from the sample(s) under test.

Standardised positive and negative control materials available for use with this test are listed in Appendix 3 A.

Test control material in an identical manner as the sample(s).

Two ELISA protocols have been validated.U.K.

(a)Indirect ELISA (Robinson Smith et al., 1995)U.K.
1)

Use 100 to 200 µl aliquots of sample extract. (Heating at 100 °C for four minutes in a waterbath or heating block may reduce non-specific results in some cases).

2)

Add an equal volume of double strength coating buffer (Appendix 4) and vortex.

3)

Apply 100 µl aliquots to each of at least two wells of a microtitre plate (e.g. Nunc-Polysorp or equivalent) and incubate for one hour at 37 °C or overnight at 4 °C.

4)

Flick out the extracts from the wells. Wash the wells three times with PBS-Tween (Appendix 4), leaving the last washing solution in the wells for at least five minutes.

5)

Prepare the appropriate dilution of antibodies against-R. solanacearum in blocking buffer (Appendix 4). For validated commercial antibodies, use the recommended dilutions (usually twice as concentrated as the titre).

6)

Add 100 µl to each well and incubate for one hour at 37 °C.

7)

Flick out the antibody solution from the wells and wash as before (4).

8)

Prepare the appropriate dilution of secondary antibody-alkaline phosphatase conjugate in blocking buffer. Add 100 µl to each well and incubate for one hour at 37 °C.

9)

Flick out conjugated antibody from wells and wash as before (4).

10)

Add 100 µl alkaline phosphatase substrate solution (Appendix 4) to each well. Incubate in the dark at ambient temperature and read absorbance at 405 nm at regular intervals within 90 minutes.

(b)DASI ELISAU.K.
1)

Prepare the appropriate dilution of anti-R. solanacearum polyclonal immunoglobulins in coating buffer pH 9.6 (Appendix 4). Add 200 µl to each well. Incubate at 37 °C for four to five hours or at 4 °C for 16 hours.

2)

Wash the wells three times with PBS-Tween (Appendix 4).

Add 190 µl of sample extract to at least two wells. Also add positive and negative controls in two wells each per plate. Incubate for 16 hr at 4 °C.

3)

Wash the wells three times with PBS-Tween (Appendix 4).

4)

Prepare an appropriate dilution of R. solanacearum-specific monoclonal antibodies in PBS (Appendix 4) also containing 0,5 % bovine serum albumin (BSA) and add 190 µl to each well. Incubate at 37 °C for two hours.

5)

Wash the wells three times with PBS-Tween (Appendix 4).

6)

Prepare an appropriate dilution of anti-mouse immunoglobulins conjugated with alkaline phosphatase in PBS. Add 190 µl to each well. Incubate at 37 °C for two hours.

7)

Wash the wells three times with PBS-Tween (Appendix 4).

8)

Prepare an alkaline phosphatase substrate solution containing 1 mg p-nitrophenyl phosphate per ml of substrate buffer (Appendix 4). Add 200 µl to each well. Incubate in the dark at ambient temperature and read absorbance at 40 nm at regular intervals within 90 minutes.

Interpretation of ELISA test results:U.K.

The ELISA test is negative if the average optical density (OD) reading from duplicate sample wells is < 2x OD of that in the negative sample extract control well, providing the OD for the positive controls are all above 1,0 (after 90 minutes incubation with the substrate) and are greater than twice the OD obtained for negative sample extracts.

The ELISA test is positive if the average OD readings from duplicate sample wells is > 2x OD in the negative sample extract well provided that OD readings in all negative control wells are < 2x those in the positive control wells.

Negative ELISA readings in positive control wells indicate that the test has not been performed correctly or that it has been inhibited. Positive ELISA readings in negative control wells indicate that cross-contamination or non-specific antibody binding has occurred.

9.Bioassay testU.K.

Note: Preliminary testing with this method should permit reproducible detection of 103 to 104 colony-forming units of R. solanacearum per ml added to sample extracts that previously tested negative (preparation see Appendix 3).U.K.

Highest sensitivity of detection can be expected when using freshly prepared sample extract and optimal growth conditions. However, the method can be successfully applied to extracts that have been stored under glycerol at -68 to -86 °C.

The following protocol is based upon Janse (1988):

9.1.Use 10 test plants of a susceptible tomato cultivar (e.g. Moneymaker or cultivar with equivalent susceptibility as determined by the testing laboratory) at the third true leaf stage for each sample. For cultural details, see Appendix 8. Alternatively, use eggplants (e.g. cultivar Black Beauty or cultivars with equivalent susceptibility), use only plants at leaf stage two to three up to full expansion of the third true leaf. Symptoms have been show to be less severe and to develop more slowly in eggplant. Where possible, it is therefore recommended to use tomato seedlings.U.K.
9.2.

Distribute 100 µl of sample extract between the test plants.U.K.

9.2.1.Syringe inoculationU.K.

Inoculate the plant stems just above the cotyledons using a syringe fitted with a hypodermic needle (not less than 23G). Distribute the sample between the test plants.

9.2.2.Slit inoculationU.K.

Holding the plant between two fingers, pipette a drop (approximately 5 - 10 µl) of the suspended pellet on the stem between the cotyledons and the first leaf.

Using a sterile scalpel, make a diagonal slit, about 1.0 cm long and approximately 2/3 of the stem thickness deep, starting the cut from the pellet drop.

Seal the cut with sterile vaseline from a syringe.

9.3.Inoculate by the same technique, five seedlings with an aqueous suspension of 105 to 106 cells per ml prepared from a 48 hr culture of a virulent biovar 2 strain of R. solanacearum as a positive control and with pellet buffer (Appendix 4) as negative control. Separate positive and negative control plants from the other plants to avoid cross-contamination.U.K.
9.4.Grow the test plants in quarantine facilities for up to four weeks at 25 to 30 °C and high relative humidity with appropriate watering to prevent waterlogging or wilting through water deficiency. To avoid contamination incubate positive control and negative control plants on clearly separated benches in a glasshouse or growth chamber or, in case space is limited, ensure strict separation between treatments. If plants for different samples must be incubated close together, separate them with appropriate screens. When fertilising, watering, inspecting and any other manipulations take great care to avoid cross-contamination. It is essential to keep glasshouses and growth chambers free of all insect pests since they may transmit the bacterium from sample to sample.U.K.

Observe for symptoms of wilting, epinasty, chlorosis and/or stunting.

9.5.Isolate from infected plants (Section II.3.) and identify purified cultures of presumptive R. solanacearum (Section VI.B.).U.K.
9.6.If no symptoms are observed after three weeks perform IF/PCR/Isolation on a composite sample of 1 cm stem sections of each test plant taken above the inoculation site. If the test is positive perform dilution plating (section 4.1).U.K.
9.7.Identify any purified cultures of presumptive R. solanacearum (Section VI.B.).U.K.
Interpretation of the bioassay test resultsU.K.

Valid Bioassay test results are obtained when plants of the positive control show typical symptoms, the bacteria can be reisolated from these plants and no symptoms are found on the negative controls.

The bioassay test is negative if test plants are not infected by R. solanacearum, and provided that R. solanacearum is detected in positive controls.

The bioassay test is positive if the test plants are infected by R. solanacearum.

B.IDENTIFICATION TESTSU.K.

Identify pure cultures of presumptive R. solanacearum isolates using at least two of the following tests based on different biological principles.U.K.

Include known reference strains where appropriate for each test performed (see Appendix 3).

1.Nutritional and enzymatic identification testsU.K.

Determine the following phenotypic properties, which are universally present or absent in R. solanacearum, according to the methods of Lelliott and Stead (1987), Klement et al. (1990), Schaad (2001).

TestExpected result
Fluorescent pigment production
Poly-ß-hydroxybutyrate inclusions+
Oxidation/fermentation (O/F) testO+/F–
Catalase activity+
Kovac’s oxidase test+
Reduction of nitrate+
Utilisation of citrate+
Growth at 40 °C
Growth in 1 % NaCl+
Growth in 2 % NaCl
Arginine dihydrolase activity
Gelatine liquefaction
Starch hydrolysis
Aesculin hydrolysis
Levan production
2.IF testU.K.
2.1.Prepare a suspension of approximately 106 cells per ml in IF buffer (Appendix 4).U.K.
2.2.Prepare a twofold dilution series of an appropriate antiserum (see website http://forum.europa.eu.int/Public/irc/sanco/Home/main).U.K.
2.3.Apply the IF procedure (Section VI.A.5.).U.K.
2.4.A positive IF test is achieved if the IF titre of the culture is equivalent to that of the positive control.U.K.
3.ELISA testU.K.

Note: If performing only 2 identification tests, do not use another serological test in addition to this method.U.K.

3.1.Prepare a suspension of approximately 108 cells per ml in 1X PBS (Appendix 4).U.K.
3.2.Perform an appropriate ELISA procedure with a specific monoclonal antibody to R. solanacearum.U.K.
3.3.A positive ELISA test is achieved if the ELISA reading obtained from the culture is at least half that obtained for the positive control.U.K.
4.PCR testsU.K.
4.1.Prepare a suspension of approximately 106 cells per ml in molecular grade sterile water.U.K.
4.2.Heat 100 µl of the cell suspension in closed tubes in a heating block or boiling waterbath at 100 °C for four minutes. The samples may then be stored at -16 to -24 °C until required.U.K.
4.3.Apply appropriate PCR procedures to amplify R. solanacearum-specific amplicons (e.g. Seal et al. (1993); Pastrik and Maiss (2000); Pastrik et al. (2002); Boudazin et al. (1999); Opina et al. (1997), Weller et al. (1999).U.K.
4.4.A positive identification of R. solanacearum is achieved if the PCR amplicons are the same size and have the same restriction fragment length polymorphisms as for the positive control strain.U.K.
5.FISH testU.K.
5.1.Prepare a suspension of approximately 106 cells per ml in UPW.U.K.
5.2.Apply the FISH procedure (Section VI.A.7.) with at least 2 R. solanacearum-specific oligo-probes (Appendix 7).U.K.
5.3.A positive FISH test is achieved if the same reactions are achieved from the culture and the positive control.U.K.
6.Fatty acid profiling (FAP)U.K.
6.1.Grow the culture on trypticase soy agar (Oxoid) for 48 hours at 28 °C.U.K.
6.2.Apply an appropriate FAP procedure (Janse, 1991; Stead, 1992).U.K.
6.3.A positive FAP test is achieved if the profile of the presumptive culture is identical to that of the positive control. The presence of characteristic fatty acids are 14:0 3OH, 16:0 2OH, 16:1 2OH and 18:1 2OH and absence of 16:0 3OH is highly indicative of a Ralstonia sp.U.K.
7.Strain characterisation methodsU.K.

Strain characterisation using one of the following methods is recommended for each new case of isolation of R. solanacearum.U.K.

Include known reference strains where appropriate for each test performed (see Appendix 3).

7.1.Biovar determinationU.K.

R. solanacearum is separated into biovars on the basis of the ability to utilise and/or oxidise three disaccharides and three hexose alcohols (Hayward, 1964 and Hayward et al., 1990). Growth media for the biovar test is described in Appendix 2. The test can be successfully performed by stab inoculating the media with pure cultures of R. solanacearum isolates and incubating at 28 °C. If the media are dispensed into sterile 96 well cell culture plates (200 µl per well) colour change from olive green to yellow can be observed within 72 hours, indicating a positive test result.

Biovar
12345
Utilisation of:
Maltose+++
Lactose+++
D (+) Cellobiose+++
Mannitol+++
Sorbitol++
Dulcitol++

Additional tests differentiate biovar 2 sub-phenotypes

a

See Lelliott and Stead (1987)

Biovar 2A(Worldwide distribution)Biovar 2A(Found in Chile and Colombia)Biovar 2T(Found in tropical areas)
Utilisation of trehalose++
Utilisation of meso-inositol++
Utilisation of D ribose+
Pectolytic activityalowlowhigh
7.2.Genomic fingerprintingU.K.

Molecular differentiation of strains in the R. solanacearum complex can be achieved using several techniques, including:U.K.

7.2.1.Restriction fragment length polymorphism (RFLP) analysis (Cook et al., 1989).U.K.
7.2.2.Repetitive sequence PCR using REP, BOX and ERIC primers (Louws et al., 1995; Smith et al., 1995).U.K.
7.2.3.Amplified fragment length polymorphism (AFLP) analysis (Van der Wolf et al., 1998).U.K.
7.3.PCR methodsU.K.

Specific PCR primers (Pastrik et al, 2002; see Appendix 6) can be used to differentiate strains belonging to division 1 (biovars 3, 4 and 5) and division 2 (biovars 1, 2A and 2T) of R. solanacearum, as originally defined by RFLP analysis (Cook et al., 1989) and 16S rDNA sequencing (Taghavi et al., 1996).

C.CONFIRMATION TESTU.K.

The pathogenicity test must be performed as final confirmation of a diagnosis of R. solanacearum and for assessment of virulence of cultures identified as R. solanacearum.

1)

Prepare an inoculum of approximately 106 cells per ml from a 24 to 48 hour culture of the isolate to be tested and an appropriate positive control strain of R. solanacearum (e.g. NCPPB 4156 = PD 2762 = CFBP 3857; see Appendix 3).

2)

Inoculate 5 to 10 susceptible tomato or eggplant seedlings at the third true leaf stage (see Section VI.A.9).

3)

Incubate for up to two weeks at 25 to 28 °C and high relative humidity with appropriate watering to avoid waterlogging or drought stress. With pure cultures typical wilting should be obtained within 14 days. If after this period symptoms are not present, the culture cannot be confirmed as being a pathogenic form of R. solanacearum.

4)

Observe for symptoms of wilting and/or epinasty, chlorosis and stunting.

5)

Isolate from symptomatic plants by removing a section of stem about 2 cm above the inoculation point. Comminute and suspend in a small volume of sterile distilled water or 50 mM phosphate buffer (Appendix 4). Isolate from the suspension by dilution spreading or streaking on a suitable medium, preferably onto a selective medium (Appendix 2), incubate for 48 to 72 hours at 28 °C and observe the formation of colonies typical of R. solanacearum.

Appendix 1Laboratories involved in optimisation and validation of protocols

a

Contact scientists: see web site http://forum.europa.eu.int/Public/irc/sanco/Home/main.

LaboratoryaLocationCountry
Agentur für Gesundheit und ErnährungssicherheitVienna and LinzAustria
Departement GewasbeschermingMerelbekeBelgium
PlantedirektoratetLyngbyDenmark
Central Science LaboratoryYorkEngland
Scottish Agricultural Science AgencyEdinburghScotland
Laboratoire National de la Protection des Végétaux, Unité de BactériologieAngersFrance
Laboratoire National de la Protection des Végétaux, Station de Quarantaine de la Pomme de TerreLe RheuFrance
Biologische BundesanstaltKleinmachnowGermany
Pflanzenschutzamt HannoverHannoverGermany
State LaboratoryDublinIreland
Dipartimento di Scienze e Tecnologie AgroambientaliBolognaItaly
Regione Veneto Unità Periferica per i Servizi FitosanitariVeronaItaly
Nederlandse Algemene KeuringsdienstEmmeloordNetherlands
Plantenziektenkundige DienstWageningenNetherlands
Direcção-Geral de Protecção das CulturasLisbonPortugal
Centro Diagnostico de AldearrubiaSalamancaSpain
Instituto Valenciano de Investigaciones AgrariasValenciaSpain
Swedish University of Agricultural SciencesUppsalaSweden

Appendix 2Media for isolation and culture of R. solanacearum

(a)General growth mediaU.K.

Nutrient Agar (NA)U.K.
Nutrient Agar (Difco)23,0 g
Distilled water1,0 L

Dissolve ingredients and sterilise by autoclaving at 121 °C for 15 min.

Yeast Peptone Glucose Agar (YPGA)U.K.
Yeast extract (Difco)5,0 g
Bacto-Peptone (Difco)5,0 g
D(+) Glucose (monohydrate)10,0 g
Bacto-Agar (Difco)15,0 g
Distilled water1,0 L

Dissolve ingredients and sterilise by autoclaving at 121 °C for 15 minutes.

Sucrose Peptone Agar (SPA)U.K.
Sucrose20,0 g
Bacto-Peptone (Difco)5,0 g
K2HPO40,5 g
MgSO4.7H2O0,25 g
Bacto-Agar (Difco)15,0 g
Distilled water1,0 l
pH 7,2 – 7,4

Dissolve ingredients and sterilise by autoclaving at 121 °C for 15 minutes.

Kelman’s Tetrazolium MediumU.K.
Casamino acids (Difco)1,0 g
Bacto-Peptone (Difco)10,0 g
Dextrose5,0 g
Bacto-Agar (Difco)15,0 g
Distilled water1,0 l

Dissolve ingredients and sterilise by autoclaving at 121 °C for 15 minutes.

Cool to 50 °C and add a filter-sterilised solution of 2,3,5-triphenyl tetrazolium chloride (Sigma) to obtain a final concentration of 50 mg per l.

(b)Validated selective growth mediaU.K.

SMSA medium (Englebrecht, 1994 as modified by Elphinstone et al., 1996)U.K.
Basal medium
Casamino acids (Difco)1,0 g
Bacto-Peptone (Difco)10,0 g
Glycerol5,0 ml
Bacto-Agar (Difco); see Note 2.15,0 g
Distilled water1,0 L

Dissolve ingredients and sterilise by autoclaving at 121 °C for 15 minutes.

Cool to 50 °C and add filter-sterilised aqueous stock solutions of the following ingredients to obtain the specified final concentrations:

Crystal Violet (Sigma)5 mg per l
Polymixin-B-Sulphate (Sigma P-1004)600 000 U (approximately 100 mg) per l
Bacitracin (Sigma B-0125)1 250 U (approximately 25 mg) per l
Chloramphenicol (Sigma C-3175)5 mg per l
Penicillin-G (Sigma P-3032)825 U (approximately 0,5 mg) per l
2,3,5-triphenyl tetrazolium chloride (Sigma)50 mg per l
Note:U.K.
1.Use of reagents other than those specified above may affect growth of R. solanacearum.U.K.
2.Oxoid Agar #1 can be used in place of Bacto-Agar (Difco). In this case growth of R. solanacearum will be slower, although growth of competing saprophytes may also be reduced. Typical colonies of R. solanacearum may take 1 to 2 days longer to form and the red colouration may be lighter and more diffuse than on Bacto-Agar.U.K.
3.Increasing bacitracin concentration to 2 500 U per l may reduce populations of competing bacteria without affecting growth of Ralstonia solanacearum.U.K.

Store media and stock solutions of antibiotics at 4 °C in the dark and use within one month.

Plates should be free from surface condensation before use.

Avoid excess drying of plates.

Quality control should be performed after preparation of each new batch of medium by plating a suspension of a reference culture of R. solanacearum (see Appendix 3) and observing formation of typical colonies after incubation at 28 °C for two to five days.

(c)Validated enrichment mediaU.K.

SMSA Broth (Elphinstone et al., 1996)U.K.

Prepare as for SMSA selective agar medium but omit Bacto-Agar and 2,3,5-tetrazolium chloride.

Modified Wilbrink broth (Caruso et al., 2002)U.K.
Sucrose10 g
Proteose peptone5 g
K2HPO40,5 g
MgSO40,25 g
NaNO30,25 g
Distilled water1 l

Sterilise by autoclaving at 121 °C for 15 minutes and cool to 50 °C

Add antibiotic stock solutions as for SMSA broth.

Appendix 3

A.Commercially available standardised control materialU.K.

(a)Bacterial isolatesU.K.

The following bacterial isolates are recommended for use as standard reference material either as positive controls (Table 1) or during optimisation of tests to avoid cross-reactions (Table 2). All strains are commercially available from:

1.

National Collection of Plant Pathogenic Bacteria (NCPPB), Central Science Laboratory, York, UK

2.

Culture Collection of the Plant Protection Service (PD), Wageningen, the Netherlands.

3.

Collection Française de Bactéries Phytopathogènes (CFBP), INRA Station Phytobactériologie, Angers, France.

Table 1
SMT reference panel of isolates of R. solanacearum
a

Use as standard reference strain of R. solanacearum biovar 2 (race 3).

NCPPB codeSMT#Other codesCountry of originBiovar
NCPPB 41536CFBP 4582, Pr 3020, EURS11Egypt2
NCPPB 415410CFBP 4585, 550, EURS21Turkey2
NCPPB 385712CFBP 4587, Pr 1140, EURS26England2
NCPPB 158423CFBP 4598, EURS49Cyprus2
NCPPB 250524CFBP 4599, EURS50Sweden2
NCPPB 415526CFBP 4601, 502, EURS55Belgium2
NCPPB 4156a71aPD 2762, CFBP 3857Netherlands2
NCPPB 415766LNPV 15.59France2
NCPPB 415839CFBP 4608, Port 448, EURS80Portugal2
NCPPB 416069IVIA-1632-2Spain2
NCPPB 416176B3BGermany2
NCPPB 32541CFBP 2047, KEL60-1, R842USA1
NCPPB 396742CFBP 4610, R285, GONg7Costa Rica1
NCPPB 402843CFBP 4611, R303/571, CIP310, SEQ205Colombia2
NCPPB 398544CFBP 4612, R578, CIP312Peru2T
NCPPB 398945CFBP 4613, R568, CIP226Brazil2T
NCPPB 399646CFBP 3928, R276/355, CIP72, SEQ225Peru3
NCPPB 399747CFBP 4614, R280/363, CIP49, HAY0131aAustralia3
NCPPB 402948CFBP 4615, R297/349, CIP121, CMIb2861Sri Lanka4
NCPPB 400549CFBP 4616, R470Philippines4
NCPPB 401150CFBP 4617, R288, HEmps2China5

Note: Authenticity of the above strains can be guaranteed only if obtained from an authentic culture collection.U.K.

Table 2:
SMT reference panel of serologically- or genetically-related bacteria for use in optimisation of detection tests
a

Potential cross-reacting strain in serological tests (IF and/or ELISA) with polyclonal antisera.

b

Strain from which PCR product can be amplified in some laboratories of a similar size to that expected using specific primers OLI-1 and Y-2 (see Appendix 6).

c

Likely to cross-react in most tests but known to occur only on banana in Indonesia.

NCPPB codeSMT#Other codeIdentification
NCPPB 416251CFBP 1954 Bacillus polymyxa a
NCPPB 416352CFBP 1538 Pseudomonas marginalis pv. marginalis a
NCPPB 4164CFBP 2227 Burkholderia cepacia b
NCPPB 4165CFBP 2459 Ralstonia pickettii b
NCPPB 416658

CFBP 3567

CSL Pr1150

Ralstonia pickettii a
NCPPB 416760

CFBP 4618

PD 2778

Ralstonia sp.a
NCPPB 112753CFBP 3575 Burkholderia andropogonis a
NCPPB 35354CFBP 3572 Burkholderia caryophylli a
NCPPB 94555CFBP 3569 Burkholderia cepacia a
NCPPB 370856CFBP 3574 Burkholderia glumae a
NCPPB 359057CFBP 3573 Burkholderia plantarii a
NCPPB 372659CFBP 3568 Banana Blood Disease Bacterium a b c
NCPPB 416861

CFBP 4619

IPO S339

Enterobacter sp.a
NCPPB 416962IPO 1695 Enterobacter sp.a
NCPPB 417063

CFBP 4621

IPO S306

Ochrobactrum anthropi a b
NCPPB 417164

CFBP 4622

IPO 1693

Curtobacterium sp.a b
NCPPB 417265IPO 1696a Pseudomonas sp.a
NCPPB 4173PD 2318 Aureobacterium sp.b
NCPPB 417481IVIA 1844.06 Flavobacterium sp.a b
(b)Commercially available standardised control materialU.K.

The following standard control material is available from the NCPPB culture collection.

Freeze dried pellet of potato extract from 200 healthy potato tubers as negative control for all tests.

Freeze dried pellet of potato extract from 200 healthy potato tubers containing 103 to 104 and 104 to 106 cells R. solanacearum biovar 2 (strain NCPPB 4156 = PD 2762 = CFBP 3857) as positive controls for serological and PCR tests. Since cell viability is affected during freeze-drying, these are not suitable as standard controls for isolation or bioassay tests.

Formalin-fixed suspensions of R. solanacearum biovar 2 (strain NCPPB 4156 = PD 2762 = CFBP 3857) at 106 cells per ml as positive controls for serological tests.

B.Preparation of positive and negative controls for the core screening tests PCR/IF and FISHU.K.

Produce a 48 hour culture of a virulent strain of R. solanacearum race3/biovar2 (e.g. strain NCPPB 4156 = PD 2762 = CFBP 3857) on basal SMSA medium and suspend in 10 mM phosphate buffer to obtain a cell density of approximately 2 × 108 cfu per ml. This is usually obtained by a faintly turbid suspension equivalent to an optical density of 0,15 at 600 nm.

Remove the heel end cores of 200 tubers taken from a white skin variety production known to be free from R. solanacearum.

Process the heel ends as usual and resuspend the pellet in 10 ml.

Prepare 10 sterile 1,5 ml microvials with 900 µl of the resuspended pellet.

Transfer 100 µl of the suspension of R. solanacearum to the first microvial. Vortex.

Establish decimal levels of contamination by further diluting in the next five microvials.

The six contaminated microvials will be used as positive controls. The four non-contaminated microvials will be used as negative controls. Label the microvials accordingly.

Prepare aliquots of 100 µl in sterile 1,5 ml microvials thus obtaining nine replicas of each control sample. Store at -16 to -24 °C until use.

The presence and quantification of R. solanacearum in the control samples should be first confirmed by IF.

For the PCR test perform DNA extraction from positive and negative control samples with each series of test samples.

For IF and FISH tests perform assays on positive and negative control samples with each series of test samples.

For IF, FISH and PCR assays R. solanacearum must be detected in at least the 106 and 104 cells/ml of the positive controls and not in any of the negative controls.

Appendix 4Buffers for test procedures

General: Unopened sterilised buffers can be stored for up to one yearU.K.

1.Buffers for extraction procedureU.K.

1.1.Extraction buffer (50 mM phosphate buffer, pH 7,0)U.K.

This buffer is used for extraction of the bacterium from plant tissues by homogenisation or shaking.

Na2HPO4 (anhydrous)4,26 g
KH2PO42,72 g
Distilled water1.00 l

Dissolve ingredients, check pH and sterilise by autoclaving at 121 °C for 15 min.

Additional components may be useful as follows:

a

For use with homogenisation extraction method

Purpose Quantity (per l)
Lubrol flakesDeflocculanta0,5 g
DC silicone antifoamAnti-foam agenta1,0 ml
Tetrasodium pyrophosphateAnti-oxidant1,0 g
Polyvinylpyrrolidone-40000 (PVP-40)Binding of PCR inhibitors50 g
1.2.Pellet buffer (10 mM phosphate buffer, pH 7,2)U.K.

This buffer is used for resuspension and dilution of potato tuber heel-end core extracts following concentration to a pellet by centrifugation.

Na2HPO4.12H2O2,7 g
NaH2PO4.2H2O0,4 g
Distilled water1,0 l

Dissolve ingredients, check pH and sterilise by autoclaving at 121 °C for 15 minutes.

2.Buffers for the IF testU.K.

2.1.IF-Buffer (10 mM phosphate buffered saline (PBS), pH 7.2)U.K.

This buffer is used for dilution of antibodies

Na2HPO4.12H2O2,7 g
NaH2PO4.2H2O0,4 g
NaCL8,0 g
Distilled water1,0 l

Dissolve ingredients, check pH and sterilise by autoclaving at 121 °C for 15 minutes.

2.2.IF-buffer-TweenU.K.

This buffer is used to wash slides.

Add 0,1 % Tween 20 to the IF buffer.

2.3.Phosphate buffered glycerol, pH 7,6U.K.

This buffer is used as a mountant fluid on the windows of IF slides to enhance fluorescence.

Na2HPO4.12H2O3,2 g
NaH2PO4.2H2O0,15 g
Glycerol50 ml
Distilled water100 ml

Anti-fading mountant solutions are commercially available e.g. Vectashield® (Vector Laboratories) or Citifluor® (Leica).

3.Buffers for the Indirect ELISA testU.K.

3.1.Double strength coating buffer, pH 9,6.U.K.
Na2CO36,36 g
NaHCO311,72 g
Distilled water1,00 l

Dissolve ingredients, check pH and sterilise by autoclaving at 121 °C for 15 minutes.

Sodium sulphite (0.2 %) may be added as antioxidant if required to prevent build up of oxidised aromatic compounds.

3.2.10X Phosphate buffered saline (PBS), pH 7,4U.K.
NaCL80,0 g
KH2PO42,0 g
Na2HPO4.12H2O29,0 g
KCl2,0 g
Distilled water1,0 L
3.3.PBS-TweenU.K.
10X PBS100 ml
10 % Tween 205 ml
Distilled water895 ml
3.4.Blocking (antibody) buffer (must be freshly prepared).U.K.
10X PBS10,0 ml
Polyvinylpyrrolidone-44000 (PVP-44)2,0 g
10 % Tween 200,5 ml
Milk powder0,5 g
Distilled watermake up to 100 ml
3.5.Alkaline phosphatase substrate solution, pH 9,8U.K.
Diethanolamine97 ml
Distilled water800 ml

Mix and adjust to pH 9,8 with concentrated HCl.

Make up to 1 L with distilled water.

Add 0,2 g MgCl2.

Dissolve 2 phosphatase substrate 5 mg tablets (Sigma) per 15 ml of solution.

4.Buffers for DASI ELISA testU.K.

4.1.Coating buffer, pH 9,6U.K.
Na2CO31,59 g
NaHCO32,93 g
Distilled water1 000 ml

Dissolve ingredients and check pH 9,6

4.2.10X Phosphate saline buffer(PBS) pH 7,2 to 7,4U.K.
NaCl80,0 g
NaH2PO4.2 H2O4,0 g
Na2HPO4.12H2O27,0 g
Distilled water1 000 ml
4.3.PBS-TweenU.K.
10X PBS50 ml
10 % Tween 205 ml
Distilled water950 ml
4.4.Substrate buffer, pH 9,8U.K.
Diethanolamine100 ml
Distilled water900 ml

Mix and adjust to pH 9,8 with concentrated HCl.

Appendix 5Determination of contamination level in IF and FISH tests

1.

Count the mean number of typical fluorescent cells per field of view (c).

2.

Calculate the number of typical fluorescent cells per microscope slide window (C).

C = c × S/s

whereS=surface area of window of multispot slide
ands=surface area of objective field
s = πi2/4G2K2wherei=field coefficient (varies from 8 to 24 depending upon ocular type)
K=tube coefficient (1 or 1,25)
G=magnification of objective (100 ×, 40 × etc.).
3.

Calculate the number of typical fluorescent cells per ml of re-suspended pellet (N).

N = C × 1 000/y × F

wherey=volume of re-suspended pellet on each window
andF=dilution factor of re-suspended pellet.

Appendix 6Validated PCR protocols and reagents

NB: Preliminary testing should permit reproducible detection of 103 to 104 cells of R. solanacearum per ml of sample extract.U.K.

Preliminary testing should also show no false positive results with a panel of selected bacterial strains (see Appendix 3).

1.PCR protocol of Seal et al. (1993)U.K.

1.1.Oligonucleotide primersU.K.
Forward primer OLI-15′-GGG GGT AGC TTG CTA CCT GCC-3′
Reverse primer Y-25′-CCC ACT GCT GCC TCC CGT AGG AGT-3′

Expected amplicon size from R. solanacearum template DNA = 288 bp

1.2.PCR reaction mixU.K.
a

Method was validated using Taq polymerase from Perkin Elmer (AmpliTaq) and Gibco BRL.

ReagentQuantity per reactionFinal concentration
Sterile UPW17,65 µl
10X PCR buffera (15 mM MgCl2)2,5 µl1X (1,5 mM MgCl2)
dNTP mix (20 mM)0,25 µl0,2 mM
Primer OLI-1 (20 µM)1,25 µl1µM
Primer Y-2 (20 µM)1,25 µl1µM
Taq polymerase (5U/µl)a0,1 µl0,5 U
Sample volume2,0 µl
Total volume25 µl
1.3.PCR reaction conditionsU.K.

Run the following programme:

1 cycle of:(i)2 minutes at 96 °C (denaturation of template DNA)
35 cycles of:(ii)20 seconds at 94 °C (denaturation of template DNA)
(iii)20 seconds at 68 °C (annealing of primers)
(iv)30 seconds at 72 °C (extension of copy)
1 cycle of:(v)10 minutes at 72 °C (final extension)
(vi)hold at 4 °C.

NB: This programme was optimised for use with a Perkin Elmer 9600 thermal cycler. Modification of the duration steps of cycles (ii), (iii) and (iv) may be required for use with other models.U.K.

1.4.Restriction enzyme analysis of amplicon.U.K.

PCR products amplified from R. solanacearum DNA produce a distinctive restriction fragment length polymorphism with enzyme Ava II after incubation at 37 °C.

2.PCR protocol of Pastrik and Maiss (2000)U.K.

2.1.Oligonucleotide primersU.K.
Forward primer Ps-15′- agt cga acg gca gcg ggg g -3′
Reverse primer Ps-25′- ggg gat ttc aca tcg gtc ttg ca -3′

Expected amplicon size from R. solanacearum template DNA = 553 bp.

2.2.PCR reaction mixU.K.
a

Methods were validated using Taq polymerase from Perkin Elmer (AmpliTaq) and Gibco BRL.

N.B. Originally optimised for MJ Research PTC 200 thermocycler with Gibco Taq Polymerase.

Perkin Elmer AmpliTaq and buffer can also be used at the same concentrations.

ReagentQuantity per reactionFinal concentration
Sterile UPW16,025 µl
10X PCR buffera2,5 µl1X (1,5 mM MgCl2)
BSA (fraction V) (10 %)0,25 µl0,1 %
d-nTP mix (20 mM)0,125 µl0,1 mM
Primer Ps-1 (10 µM)0,5 µl0,2 µM
Primer Ps-2 (10 µM)0,5 µl0,2 µM
Taq polymerase (5U/µl)a0,1 µl0,5 U
Sample volume5,0 µl
Total volume:25,0 µl
2.3.PCR reaction conditionsU.K.

Run the following programme:

1 cycle of:(i)5 minutes at 95 °C (denaturation of template DNA)
35 cycles of:(ii)30 seconds at 95 °C (denaturation of template DNA)
(iii)30 seconds at 68 °C (annealing of primers)
(iv)45 seconds at 72 °C (extension of copy)
1 cycle of:(v)5 minutes at 72 °C (final extension)
(vi)hold at 4 °C.

NB: This programme is optimised for use with an MJ Research PTC 200 thermal cycler. Modification of the duration steps of cycles (ii), (iii) and (iv) may be required for use with other models.U.K.

2.4.Restriction enzyme analysis of amplicon.U.K.

PCR products amplified from R. solanacearum DNA produce a distinctive restriction fragment length polymorphism with enzyme Taq I after incubation at 65 °C for 30 minutes. The restriction fragments obtained from R. solanacearum-specific fragment are 457 bp and 96 bp in size.

3.Multiplex PCR protocol with internal PCR control (Pastrik et al., 2002)U.K.

3.1.Oligonucleotide primersU.K.
Forward primer RS-1-F5′- ACT AAC GAA GCA GAG ATG CAT TA -3′
Reverse primer RS-1-R5′- CCC AGT CAC GGC AGA GAC T -3′
Forward primer NS-5-F5′- AAC TTA AAG GAA TTG ACG GAA G -3′
Reverse primer NS-6-R5′- GCA TCA CAG ACC TGT TAT TGC CTC -3′

Expected amplicon size from R. solanacearum template DNA = 718 bp (RS-primer set)

Expected amplicon size from the 18S rRNA internal PCR control = 310 bp (NS-primer set).

3.2.PCR reaction mixU.K.
a

Methods were validated using Taq polymerase from Perkin Elmer (AmpliTaq) and Gibco BRL.

b

Concentration of primers NS-5-F and NS-6-R were optimised for potato heel end core extraction using the homogenisation method and DNA purification according to Pastrik (2000) (see Section VI.A.6.1.a.). Re-optimisation of reagent concentrations will be required if extraction by shaking or other DNA isolation methods are used.

ReagentQuantity per reactionFinal concentration
Sterile UPW12,625 µl
10X PCR buffera (15 mM MgCl2)2,5 µl1X (1,5 mM MgCl2)
BSA (fraction V) (10 %)0,25 µl0,1 %
d-nTP mix (20 mM)0,125 µl0,1 mM
Primer RS-1-F (10 µM)2,0 µl0,8 µM
Primer RS-1-R (10 µM)2,0 µl0,8 µM
Primer NS-5-F (10 µM)b0,15 µl0,06 µM
Primer NS-6-R (10 µM)b0,15 µl0,06 µM
Taq polymerase (5 U/µl)a0,2 µl1,0 U
Sample volume5,0 µl
Total volume:25,0 µl
3.3.PCR reaction conditionsU.K.

Run the following programme:

1 cycle of:(i)5 minutes at 95 °C (denaturation of template DNA)
35 cycles of:(ii)30 seconds at 95 °C (denaturation of template DNA)
(iii)30 seconds at 58 °C (annealing of primers)
(iv)45 seconds at 72 °C (extension of copy)
1 cycle of:(v)5 minutes at 72 °C (final extension)
(vi)hold at 4 °C.

NB: This programme is optimised for use with an MJ Research PTC 200 thermal cycler. Modification of the duration steps of cycles (ii), (iii) and (iv) may be required for use with other models.U.K.

3.4.Restriction enzyme analysis of amplicon.U.K.

PCR products amplified from R. solanacearum DNA produce a distinctive restriction fragment length polymorphism with enzyme Bsm I or an Isoschizomere (e.g. Mva 1269 I) after incubation at 65 °C for 30 minutes.

4.R. solanacearum biovar-specific PCR protocol (Pastrik et al., 2001)U.K.

4.1.Oligonucleotide primersU.K.
Forward primer Rs-1-F5′- ACT AAC GAA GCA GAG ATG CAT TA -3′
Reverse primer Rs-1-R5′- CCC AGT CAC GGC AGA GAC T -3′
Reverse primer Rs-3-R5′- TTC ACG GCA AGA TCG CTC -3′

Expected amplicon size from R. solanacearum template DNA:

with Rs-1-F/Rs-1-R = 718 bp

with Rs-1-F/Rs-3-R = 716 bp.

4.2.PCR reaction mixU.K.
(a)

Biovar 1/2-specific PCR

a

Methods have been validated using Taq polymerase from Perkin Elmer (AmpliTaq) and Gibco BRL.

ReagentQuantity per reactionFinal concentration
Sterile UPW12,925 µl
10X PCR Buffera2,5 µl1X (1,5 mM MgCl2)
BSA (fraction V) (10 %)0,25 µl0,1 %
d-NTP mix (20mM)0,125 µl0,1 mM
Primer Rs-1-F (10 µM)2 µl0,8 µM
Primer Rs-1-R (10 µM)2 µl0,8 µM
Taq polymerase (5U/µl)a0,2 µl1 U
Sample volume5,0 µl
Total volume25,0 µl
(b)

Biovar 3/4/5-specific PCR

a

Methods have been validated using Taq polymerase from Perkin Elmer (AmpliTaq) and Gibco BRL.

ReagentQuantity per reactionFinal concentration
Sterile UPW14,925 µl
10X PCR Buffera2,5 µl1X (1,5 mM MgCl2)
BSA (fraction V) (10 %)0,25 µl0,1 %
dNTP mix (20 mM)0,125 µl0,1 mM
Primer Rs-1-F (10 µM)1 µl0,4 µM
Primer Rs-3-R (10 µM)1 µl0,4 µM
Taq polymerase (5 U/µl)a0,2 µl1 U
Sample volume5,0 µl
Total volume25,0 µl
4.3.PCR reaction conditionsU.K.

Run the following programme for both biovar 1/2- and biovar 3/4/5-specific reactions:

1 cycle of:(i)5 minutes at 95 °C (denaturation of template DNA)
35 cycles of:(ii)30 seconds at 95 °C (denaturation of template DNA)
(iii)30 seconds at 58 °C (annealing of primers)
(iv)45 seconds at 72 °C (extension of copy)
1 cycle of:(v)5 minutes at 72 °C (final extension)
(vi)hold at 4 °C.

NB: This programme was optimised for use with an MJ Research PTC 200 thermal cycler. Modification of the duration steps of cycles (ii), (iii) and (iv) may be required for use with other models.U.K.

4.4.Restriction enzyme analysis of amplicon.U.K.

PCR products amplified from R. solanacearum DNA using primers Rs-1-F and Rs-1-R produce a distinctive restriction fragment length polymorphism with enzyme Bsm I or an Isoschizomere (e.g. Mva 1269 I) after incubation at 65 °C for 30 minutes. PCR products amplified from R. solanacearum DNA using primers Rs-1-F and Rs-3-R have no restriction sites.

5.Preparation of the loading bufferU.K.

5.1.Bromphenol blue (10 %-stock solution)U.K.
Bromphenol blue5 g
Distilled water (bidest)50 ml
5.2.Loading bufferU.K.
Glycerol (86 %)3,5 ml
Bromphenol blue (5,1)300 µl
Distilled Water (bidest)6,2 ml

6.10X Tris Acetate EDTA (TAE) buffer, pH 8.0U.K.

Tris buffer48,40 g
Glacial acetic acid11,42 ml
EDTA (disodium salt)3,72 g
Distilled water1,00 L

Dilute to 1X before use.

Also commercially available (e.g. Invitrogen or equivalent).

Appendix 7Validated reagents for FISH test

1.Oligo-probesU.K.

R. solanacearum-specific probe OLI-1-CY3: 5′-ggc agg tag caa gct acc ccc-3′

Non-specific eubacterial probe EUB-338-FITC: 5′-gct gcc tcc cgt agg agt-3′

2.Fixative solutionU.K.

(WARNING! THE FIXATIVE CONTAINS PARAFORMALDEHYDE WHICH IS TOXIC. WEAR GLOVES AND DO NOT INHALE. IT IS ADVISABLE TO WORK IN A FUME CUPBOARD.)

(i)

Heat 9 ml molecular grade water (e.g. Ultra pure water (UPW)) to about 60 °C and add 0,4 g paraformaldehyde. Paraformaldehyde dissolves after adding 5 drops of 1N NaOH and stirring with a magnetic stirrer.

(ii)

Adjust pH to 7.0 by addition of 1ml of 0,1M phosphate buffer (PB; pH 7,0) and 5 drops of 1N HCl. Check pH with indicator strips and adjust if necessary with HCl or NaOH. (WARNING! DO NOT USE A PH METER IN SOLUTIONS WITH PARAFORMALEDHYDE.)

(iii)

Filter the solution through a 0,22 µm membrane filter and keep dust-free at 4 °C until further use.

3.3X HybmixU.K.

NaCl2,7 M
Tris-HCl60 mM (pH 7,4)
EDTA (filter sterilised and autoclaved)15 mM

Dilute to 1X as required.

4.Hybridisation solutionU.K.

1X Hybmix
Sodium dodecyl sulphate (SDS)0,01 %
Formamide30 %,
probe EUB 3385 ng/μl
probe OLI-1 or OLI-25 ng/μl

Prepare quantities of hybridisation solution according to the calculations in Table 1. For each slide (containing 2 different samples in duplicate) 90 μl hybridisation solution is required. IMPORTANT: FORMAMIDE IS VERY TOXIC SO WEAR GLOVES AND TAKE NECESSARY SAFETY PRECAUTIONS!

Table 1
Suggested quantities for preparation of hybridisation mix

NB: Store all solutions containing light sensitive oligo-probes in the dark at -20 °C.

Protect from direct sunlight or electric light during use.

Number of slides:146810
Sterile UPW23,192,4138,6184,8231,0
3x hybmix30,0120,0180,0240,0300,0
1 % SDS0,93,65,47,29,0
Formamide27,0108,0162,0216,0270,0
Probe EUB 338 (100 ng/μl)4,518,027,036,045,0
Probe OLI-1 or OLI-2 (100 ng/μl)4,518,027,036,045,0
Total volume (μl)90,0360,0540,0720,0900,0

5.0,1M Phosphate buffer, pH 7,0U.K.

Na2HPO48,52 g
KH2PO45,44 g
Distilled water1,00 L

Dissolve ingredients, check pH and sterilise by autoclaving at 121 °C for 15 minutes.

Appendix 8Eggplant and tomato culture

Sow seeds of tomato (Lycopersicon esculentum) or eggplant (Solanum melongena) in pasteurised seed compost. Transplant seedlings with fully expanded cotyledons (10 to 14 days) into pasteurised potting compost.

Eggplants or tomatoes should be grown in a glasshouse with the following environmental conditions prior to inoculation:

Day length14 hours or natural day length if greater;
Temperature

day 21 to 24 °C,

night14 to 18 °C.

Susceptible variety of tomato“‘Moneymaker’”
Susceptible variety of eggplant“‘Black Beauty’”
Supplierssee website http://forum.europa.eu.int/Public/irc/sanco/Home/main

REFERENCESU.K.

1.Amann, R.I., L. Krumholz and D.A. Stahl. 1990. Fluorescent-oligonucleotide probing of whole cells for determinative, phylogenetic and environmental studies in microbiology. J. Bacteriol. 172: 762-770.U.K.
2.Anon. 1998. Council Directive 98/57/EC of 20 July 1998 on the control of Ralstonia solanacearum (Smith) Yabuuchi et al. Official Journal of the European Communities L235, 1-39.U.K.
3.Boudazin, G., A.C. Le Roux, K. Josi, P. Labarre and B. Jouan. 1999. Design of division specific primers of Ralstonia solanacearum and application to the identification of European isolates. European Journal of Plant Pathology 105; 373-380.U.K.
4.Caruso, P., Gorris, M.T., Cambra, M., Palomo, J.L., Collar, J and Lopez, M.M. 2002. Enrichment Double-Antibody Sandwich Indirect Enzyme-Linked Immunosorbent Assay That Uses a Specific Monoclonal Antibody for sensitive Detection of Ralstonia solanacearum in Asymptomatic Potato Tubers. Applied and Environmental Microbiology, 68, 3634-3638.U.K.
5.Cook, D., Barlow, E. and Sequeira, L. 1989. Genetic diversity of Pseudomonas solanacearum: detection of restriction fragment length polymorphisms with DNA probes that specify virulence and the hypersensitive response. Molecular Plant-Microbe Interactions 1:113-121.U.K.
6.Elphinstone, J.G., Hennessy, J., Wilson, J.K. and Stead, D.E. 1996. Sensitivity of detection of Ralstonia solanacearum in potato tuber extracts. EPPO Bulletin 26; 663-678.U.K.
7.Englebrecht, M.C. (1994) Modification of a semi-selective medium for the isolation and quantification of Pseudomonas solanacearum. In: A.C. Hayward (ed.) Bacterial Wilt Newsletter 10, 3-5. Australian Centre for International Agricultural Research, Canberra, Australia.U.K.
8.Hayward, A.C. 1964. Characteristics of Pseudomonas solanacearum. Journal of Applied Bacteriology 27; 265-277.U.K.
9.Hayward, A.C., El-Nashaar, H.M., Nydegger, U. and De Lindo, L. 1990. Variation in nitrate metabolism in biovars of Pseudomonas solanacearum. Journal of Applied Bacteriology 69; 269-280.U.K.
10.Ito, S., Y. Ushijima, T. Fujii, S. Tanaka, M. Kameya-Iwaki, S. Yoshiwara and F. Kishi. 1998. Detection of viable cells of Ralstonia solanacearum in soil using a semi-selective medium and a PCR technique. J. Phytopathology 146; 379-384.U.K.
11.Janse, J.D. (1988) A detection method for Pseudomonas solanacearum in symptomless potato tubers and some data on its sensitivity and specificity. Bulletin OEPP/EPPO Bulletin 18, 343-351.U.K.
12.Janse, J.D. 1991. Infra- and intra-specific classification of Pseudomonas solanacaerum strains using whole cell fatty-acid analysis. Systematic and Applied Microbiology 14; 335-345.U.K.
13.Kelman, A. 1954. The relationship of pathogenicity of Pseudomonas solanacearum to colony appearance on a tetrazolium medium. Phytopathology 44; 693-695.U.K.
14.Klement Z.; Rudolph, K and D.C. Sands, 1990. Methods in Phytobacteriology. Akadémiai Kiadó, Budapest, 568 pp.U.K.
15.Lelliott, R.A. and Stead, D.E. 1987. Methods for the diagnosis of bacterial diseases of plants. Blackwell scientific Publications Ltd., Oxford. 216 pp.U.K.
16.Lopez, M.M., Gorris, M.T., Llop, P., Cubero, J., Vicedo, B., Cambra, M., 1997. Selective enrichment improves selective isolation, serological and molecular detection of plant pathogenic bacteria. In: H.W. Dehne et al., (eds). Klewer Academic Publishers. pp. 117-121.U.K.
17.Louws, F.J., Fulbright, D.W., Stephens, C.T. and De Bruijn, F.J., 1994. Specific genomic fingerprints of phytopathogenic Xanthomonas and Pseudomonas pathovars and strains generated with repetitive sequences and PCR. Applied and Environmental Microbiology, 60, 2286-2295.U.K.
18.Louws, F.J., Fulbright, D.W., Stephens, C.T. and De Bruijn, F.J. 1995. Differentiation of genomic structure by rep-PCR fingerprinting to rapidly classify Xanthomonas campestris pv. vesicatoria. Phytopathology 85; 528-536.U.K.
19.Opina, N., F. Tavner, G. Holloway, J.-F Wang, T.-H Li, R. Maghirang, M. Fegan, A.C. Hayward, V. Krishnapillai, W.F. Hong, B.W. Holloway, J.N. Timmis. 1997. A novel method for development of species and strain-specific DNA probes and PCR primers for identifying Burkholderia solanacearum (formerly Pseudomonas solanacearum). As Pac. J. Mol. Biol. Biotechnol. 5; 19-33.U.K.
20.Pastrik, K.H. and Maiss, E. 2000. Detection of R. solanacearum in potato tubers by polymerase chain reaction. J. Phytopathology 148; 619-626.U.K.
21.Pastrik, K.H., Elphinstone, J.G. and Pukall, R. 2002. Sequence analysis and detection of Ralstonia solanacearum by multiplex PCR amplification of 16S-23S ribosomal intergenic spacer region with internal positive control. European Journal of Plant Pathology 108, 831-842.U.K.
22.Robinson-Smith, A., Jones, P., Elphinstone, J.G. and Forde, S.M.D. (1995) Production of antibodies to Pseudomonas solanacearum, the causative agent of bacterial wilt. Food and Agricultural Immunology 7, 67-79.U.K.
23.Schaad, W. 2001. Laboratory guide for identification of plant pathogenic bacteria. Schaad [Hrsg.]. - 3. ed.; St. Paul, Minnesota: 373 pp.U.K.
24.Seal, S.E., L.A. Jackson, J.P.W. Young, and M.J. Daniels. 1993. Detection of Pseudomonas solanacearum, Pseudomonas syzygii, Pseudomonas pickettii and Blood Disease Bacterium by partial 16S rRNA sequencing: construction of oligonucleotide primers for sensitive detection by polymerase chain reaction. J. Gen. Microbiol. 139: 1587-1594.U.K.
25.Smith, J.J., Offord, L.C., Holderness, M. and Saddler, G.S. 1995. Genetic diversity of Burkholderia solanacearum (synonym Pseudomonas solanacearum) race 3 in Kenya. Applied and Environmental Microbiology 61; 4262-4268.U.K.
26.Stead, D.E. 1992. Grouping of plant pathogenic and some other Pseudomonas spp. using cellular fatty-acid profiles. International Journal of Systematic Bacteriology 42; 281-295.U.K.
27.Taghavi, M., Hayward, A.C., Sly, L.I., Fegan, M. 1996. Analysiss of the phylogenetic relationships of strains of Burkholderia solanacearum, Pseudomonas syzygii, and the blood disease bacterium of banana based on 16S rRNA gene sequences. International Journal of Systematic Bacteriology 46; 10-15.U.K.
28.Van Der Wolf, J.M., Bonants, P.J.M., Smith, J.J., Hagenaar, M., Nijhuis, E., Van Beckhoven, J.R.C., Saddler, G.S., Trigalet, A., Feuillade, R. 1998. Genetic diversity of Ralstonia solanacearum Race 3 in Western Europe as determined by AFLP, RC-PFGE and rep-PCR. In: Prior, P., Allen, C. and Elphinstone, J. (eds.) Bacterial wilt disease: Molecular and Ecological Aspects. Springer (Berlin) pp. 44-49.U.K.
29.Weller, S.A., Elphinstone, J.G., Smith, N., Stead, D.E. and Boonham, N. 1999. Detection of Ralstonia solanacearum strains using an automated and quantitative flourogenic 5’ nuclease TaqMan assay. Applied and Environmental Microbiology 66; 2853-2858.U.K.
30.Wullings, B.A., A.R. van Beuningen, J.D. Janse and A.D.L. Akkermans. 1998. Detection of R. solanacearum, which causes brown rot of potato, by fluorescent in situ hybridization with 23s rRNA-targeted probes. Appl. Environ. Microbiol. 64: 4546-4554.U.K.

ANNEX III

1.

For each suspected occurrence for which a positive result in the screening test(s) has been identified according to, for the listed plant material and for all other cases, the relevant methods set out in Annex II, and confirmation or refutation by completion of the said methods is awaited, there should be retention and appropriate conservation of:

  • all tubers sampled and, wherever possible, all plants sampled,

  • any remaining extract and additional prepared material for the screening test(s) e.g. immunofluorescence slides,

    and

  • all relevant documentation,

until the completion of the said methods.

Retention of the tubers will enable variety testing to be undertaken where appropriate.

2.

In the case of positive confirmation of the organism, there should be retention and appropriate conservation of:

  • the material specified in paragraph 1,

  • a sample of the infected tomato or eggplant material inoculated with the tuber or plant extract, where appropriate,

    and

  • the isolated culture of the organism,

until at least one month after the notification procedure under Article 5(2).

ANNEX IV

The elements in the investigation referred to in Article 5(1)(a)(i) shall include where relevant:

(i)

places of production,

  • growing or having grown, potatoes which are clonally related to potatoes found to be infected with the organism,

  • growing or having grown, tomatoes which are from the same source as tomatoes found to be infected with the organism,

  • growing or having grown, potatoes or tomatoes which have been placed under official control because of the suspected occurrence of the organism,

  • growing or having grown, potatoes which are clonally related to potatoes that have been grown on places of production found to be infested with the organism,

  • growing potatoes or tomatoes and located in the neighbourhood of infested places of production, including such places of production sharing production equipment and facilities directly or through a common contractor,

  • using surface water for irrigation or spraying from any source confirmed or suspected to be contaminated with the organism,

  • using surface water for irrigation or spraying from a source used in common with places of production confirmed or suspected to be infested with the organism,

  • flooded or have been flooded with surface water confirmed or suspected to be contaminated with the organism;

and

(ii)

surface water used for irrigation or spraying of, or which has flooded field(s) or place(s) of production confirmed to be infested with the organism.

ANNEX V

1.

The elements to be considered in the determination of the extent of probable contamination under Article 5(1)(a)(iii) and 5(1)(c)(iii), shall include:

  • the listed plant material grown at a place of production designated as contaminated under Article 5(1)(a)(ii),

  • place(s) of production with some production link to the listed plant material designated as contaminated under Article 5(1)(a)(ii), including those sharing production equipment and facilities directly or through a common contractor,

  • the listed plant material produced in the place(s) of production referred to in the previous indent, or present in such place(s) of production during the period when the listed plant material designated as contaminated under Article 5(1)(a)(ii), was present on the place of production referred to in the first indent,

  • premises handling the listed plant material from the places of production referred to in the above indents,

  • any machinery, vehicle, vessel, store, or units thereof, and any other objects including packaging material, that may have come into contact with the listed plant material designated as contaminated under Article 5(1)(a)(ii),

  • any of the listed plant material stored in, or in contact with, any of the structures or objects listed in the previous indent, prior to the cleansing and disinfection of such structures and objects,

  • as a result of the investigation and testing under Article 5(1)(a)(i), in the case of potato, those tubers or plants with a sister or parental clonal relationship to, and in the case of tomato, those plants with the same source as, the listed plant material designated to be contaminated under Article 5(1)(a)(ii) and for which, although they may have tested negative for the organism, it appears that contamination is probable through a clonal link. Variety testing may be undertaken to verify the identity of the contaminated and clonally related tubers or plants,

  • place(s) of production of the listed plant material referred to in the previous indent,

  • place(s) of production of the listed plant material using water for irrigation or spraying which has been designated as contaminated under Article 5(1)(c)(ii),

  • listed plant material produced on fields flooded with surface water confirmed to be contaminated.

2.

The elements to be considered in the determination of the possible spread under Article 5(1)(a)(iv) and 5(1)(c)(iii) shall include:

(i)

in cases under Article 5(1)(a)(iv),

  • the proximity of other places of production growing the listed plant material,

  • the common production and use of seed potato stocks,

  • places of production using surface water for irrigation or spraying of listed plant material in cases where there is or has been risk of surface water run-off from, or flooding of, place(s) of production designated to be contaminated under Article 5(1)(a)(ii).

(ii)

in cases where surface water has been designated as contaminated under Article 5(1)(c)(ii):

  • place(s) of production producing listed plant material adjacent to, or at risk from flooding by, the surface water designated as contaminated,

  • any discrete irrigation basin associated with the surface water designated as contaminated,

  • water bodies connected with the surface water designated as contaminated, taking into account:

    • the direction and rate of flow of the water designated as contaminated,

    • the presence of wild solanaceous host plants.

3.

The notification referred to in the first subparagraph of Article 5(2) shall be provided as follows:

  • immediately after the presence of the organism has been confirmed by laboratory testing, using the methods set out in Annex II, at least:

    • for potatoes,

      (a)

      the variety name of the lot,

      (b)

      the type (ware, seed, etc.) and where applicable the seed category,

    • for tomato plants, the variety name of the lot and, where applicable, the category.

  • without prejudice to the requirements for notification of a suspected occurrence in Article 4 (3), the Member State in which the occurrence has been confirmed shall, when there is a risk of contamination of listed plant material from or into another Member States(s), immediately notify the Member State(s) concerned of information needed to comply with Article 5(3), such as:

    (a)

    the variety name of the potato or tomato lot,

    (b)

    the name and address of the consignor and the consignee,

    (c)

    the date of delivery of the potato or tomato lot,

    (d)

    the size of the potato or tomato lot delivered,

    (e)

    a copy of the plant passport or at least the plant passport number where appropriate, or where appropriate the registration number of the grower or merchant, and a copy of the delivery notice.

The Commission shall be notified immediately when such information has been provided.

4.

The details of the additional notification referred to in the second subparagraph of Article 5(2) shall be provided as follows:

After all investigations have been finalised, for each case:

(a)

the date that contamination was confirmed,

(b)

a brief description of the investigation carried out to identify the source and possible spread of the contamination, including the level of sampling undertaken,

(c)

information on the identified or presumed sources(s) of contamination,

(d)

details of the extent of the designated contamination, including the number of places of production and for potatoes, the number of lots with an indication of the variety and, if seed potatoes, category,

(e)

details of the zone demarcation, including the number of places of production, not designated as contaminated, but included in the zone,

(f)

details of water designation, including the name and location of the water body and the extent of the designation/irrigation ban,

(g)

for any tomato plant consignment or lot designated as contaminated, the certificates prescribed in Article 13(1)(ii) of Directive 2000/29/EC and passport number, in accordance with the listing in Annex V, Part A, Section I.2.2 to Directive 2000/29/EC,

(h)

such other information relating to the confirmed outbreak(s) as the Commission may require.

ANNEX VI

1.

The provisions referred to in Article 6(1) shall be:

  • use as animal feed after heat treatment such that there is no risk of the organism surviving,

    or

  • disposal at an officially approved dedicated waste disposal site atwhich there is no identifiable risk of escape of the organism into the environment e.g. through seepage to agricultural land or contact with water sources which could be used for irrigation of agricultural land,

    or

  • incineration,

    or

  • industrial processing through direct and immediate delivery to a processing plant with officially approved waste disposal facilities for which it has been established that there is no identifiable risk of the organism spreading, and with a system of cleansing and disinfection of at least the departing vehicles,

    or

  • other measures, provided that it has been established that there is no identifiable risk of the organism spreading; such measures and their justification to be notified to the Commission and to the other Member States.

Any remaining waste associated with and arising from the above options shall be disposed of by officially approved methods in accordance with Annex VII to this Directive.

2.

The appropriate use or disposal of the listed plant material referred to in Article 6(2), under the control of the responsible official bodies of the Member State(s) concerned, with appropriate communication between responsible official bodies to ensure such control at all times and approval by the responsible official body of the Member State where the potatoes are to be packed or processed in respect of the waste disposal facilities referred to in the first and second indents, shall be:

(i)

for potato tubers,

  • use as ware potatoes intended for consumption, packed ready for direct delivery and use without repacking, on a site with appropriate waste disposal facilities. Potatoes intended for planting may only be handled at the same site, if this is done separately or after cleansing and disinfection,

    or

  • use as ware potatoes intended for industrial processing, and intended for direct and immediate delivery to a processing plant with appropriate waste disposal facilities and a system of cleansing and disinfection of at least the departing vehicles,

    or

  • some other use or disposal, provided that it is established that there is no identifiable risk of the organism spreading and subject to approval by the said responsible official bodies.

(ii)

for other plant parts including stem and foliage debris,

  • destruction,

    or

  • some other use or disposal, provided that it is established that there is no identifiable risk of the organism spreading; and subject to approval by the said responsible official bodies.

3.

The appropriate methods for decontamination of the objects referred to in Article 6(3) shall be cleansing and, where appropriate, disinfection, such that there is no identifiable risk of the organism spreading and shall be employed under the supervision of the responsible official bodies of the Member States.

4.

The series of measures to be implemented by Member States within the demarcated zone(s) established under Article 5(1)(a)(iv) and (c)(iii) and referred to in Article 6(4) shall include:

4.1.

In cases where places of production have been designated as contaminated under Article 5(1)(a)(ii):

(a)

in a field or unit of protected crop production designated to be contaminated under Article 5(1)(a)(ii), either

(i)

during at least the four growing years following the designated contamination,

  • measures shall be taken to eliminate volunteer potato and tomato plants as well as other host plants of the organism including solanaceous weeds,

    and

  • the following shall not be planted:

    • potato tubers, plants or true seeds,

    • tomato plants and seeds,

    • taking into account the biology of the organism,

    • other host plants,

    • plants of species of Brassica, for which there is an identified risk of the organism surviving,

    • crops for which there is an identified risk of the organism spreading;

  • in the first potato or tomato cropping season following the period specified in the preceding indent, and on the condition that the field has been found free from volunteer potato and tomato plants and other host plants including solanaceous weeds during official inspections for at least the two consecutive growing years prior to planting,

    • in the case of potatoes, only ware potato production shall be allowed,

    • in the case of potatoes and tomatoes, the harvested potato tubers, or the tomato plants, as appropriate, shall be tested according to the procedure detailed in Annex II;

  • in the potato or tomato cropping season succeeding that referred to in the previous indent and following an appropriate rotation cycle, which shall be at least two years if seed potatoes are to be grown, an official survey as detailed in Article 2(1), shall be conducted;

or

(ii)

during the five growing years following that of the designated contamination,

  • measures shall be taken to eliminate volunteer potato and tomato plants as well as other naturally found host plants of the organism including solanaceous weeds,

    and

  • the field shall be established and maintained during the first three years either, in bare fallow or, in cereals according to the risk identified, or, in permanent pasture with frequent close cutting or intensive grazing or, as grass for seed production, followed by planting in the succeeding two years with non-host plants of the organism for which there is no identified risk of the organism surviving or spreading,

  • in the first potato or tomato cropping season following the period specified in the preceding indent, and on the condition that the field has been found free from volunteer potato and tomato plants and other host plants including solanaceous weeds during official inspections for at least the two consecutive growing years prior to planting,

    • in the case of potatoes, seed or ware potato production shall be allowed,

    • the harvested potato tubers, or the tomato plants, as appropriate, shall be tested according to the procedure detailed in Annex II;

(b)

in all other fields of the contaminated place of production and on the condition that the responsible official bodies are satisfied that the risk of volunteer potato plants and tomato plants and other naturally found host plants of the organism including solanaceous weeds as appropriate have been eliminated:

  • in the growing year following that of the designated contamination,

    • either no potato tubers or plants or true seeds, or other host plants of the organism shall be planted,

      or

    • in the case of potato tubers, certified seed potatoes may be planted for ware production only,

    • in the case of tomato plants, tomato plants grown from seed which meets the requirements of Directive 2000/29/EC may be planted for fruit production only;

  • in the second growing year following that of the designated contamination,

    • in the case of potatoes, only certified seed potatoes or seed potatoes officially tested for the absence of brown rot and grown under official control on places of production other than those referred to in 4.1 shall be planted for either seed or ware production,

    • in the case of tomatoes, only tomato plants grown from seed which meets the requirements of Directive 2000/29/EC or, if vegetatively propagated, from tomato plants produced from such seed and grown under official control on places of production other than those referred to in 4.1, shall be planted for either plant or fruit production;

  • for at least in the third growing year following that of the designated contamination,

    • in the case of potatoes, only certified seed potatoes or seed potatoes grown under official control from certified seed potatoes shall be planted for either seed or ware production,

    • in the case of tomatoes, only tomato plants grown from seed which meets the requirements of Directive 2000/29/EC or tomato plants grown under official control from such plants shall be planted for either plant or fruit production;

  • in each of the growing years referred to in the previous indents, measures shall be taken to eliminate volunteer potato plants and other naturally found host plants of the organism if present and, an official inspection of the growing crop at appropriate times shall be conducted and in each potato field, official testing of the harvested potatoes shall be conducted according to the procedure detailed in Annex II;

(c)

immediately following the designation of contamination under Article 5(1)(a)(ii) and after the first subsequent growing year:

  • all machinery and storage facilities on the place of production and involved in potato or tomato production shall be cleansed and, where appropriate, disinfected using appropriate methods, as specified in point 3,

  • official controls on irrigation and spraying programmes, including a ban thereof, shall be introduced as appropriate in order to prevent the spread of the organism;

(d)

in an unit of protected crop production designated as contaminated under Article 5(1)(a)(ii) where complete replacement of the growing medium is possible,

  • no potato tubers, plants or true seeds, or other host plants of the organism including tomato plants and seeds shall be planted unless the production unit has been subjected to officially supervised measures to eliminate the organism and to remove all host plant material, including, at least, a complete change in growing medium and cleansing and, where appropriate, disinfection of the said unit and all equipment, and subsequently has been granted approval for potato or tomato production by the responsible official bodies,

    and

  • for potato production, this production shall be from certified seed potatoes, or from mini-tubers or micro-plants derived from tested sources,

  • for tomato production, this production shall be from seed which meets the requirements of Directive 2000/29/EC or, if vegetatively propagated, from tomato plants produced from such seed and grown under official control,

  • official controls on irrigation and spraying programmes, including a ban thereof, shall be introduced as appropriate, in order to prevent the spread of the organism;

4.2.

Within the demarcated zone, without prejudice to the measures detailed under 4.1, the Member States shall:

(a)

immediately following the designated contamination ensure that all machinery and storage facilities on such premises and involved with potato or tomato production be cleansed and disinfected, as appropriate, and using appropriate methods, as specified in 3,

(b)

immediately, and for at least three growing years following the designated contamination:

(ba)

in cases where the demarcated zone has been determined under Article 5(1)(a)(iv),

  • ensure supervision by their responsible official bodies of premises growing, storing or handling potato tubers or tomatoes, together with premises which operate machinery for potato or tomato production under contract,

  • require the planting of only certified seed or seed grown under official control for all potato crops within that zone, and testing after harvest of seed potato crops grown in places of production determined as probably contaminated under Article 5(1)(a)(iii),

  • require the separate handling of harvested seed potato stocks to those of ware on all premises within the zone, or a system of cleansing and, where appropriate, disinfection to be carried out between the handling of seed and ware stocks,

  • require the planting of only tomato plants grown from seed which meets the requirements of Directive 2000/29/EC or, if vegetatively propagated, from tomato plants produced from such seed and grown under official control, for all tomato crops within that zone,

  • conduct an official survey as detailed in Article 2(1);

(bb)

in cases where surface water has been designated as contaminated under Article 5(1)(c)(ii) or included in the elements for the possible spread of the organism in accordance with Annex V point 2,

  • conduct an annual survey at appropriate times including sampling of surface water and where appropriate solanaceous host plants in the relevant water sources and testing in accordance with the relevant methods set out in Annex II for the listed plant material and for other cases,

  • introduce official controls on irrigation and spraying programmes, including a ban on the use of the water designated as contaminated for the irrigation and spraying of listed plant material, and, where appropriate, other host plants in order to prevent the spread of the organism. This ban may be reviewed on the basis of the results obtained in the said annual survey, and designations revoked where the responsible official bodies are satisfied that the surface water is no longer contaminated. The use of water subject to a ban may be permitted, under official control, for irrigation and spraying of host plants, where officially approved techniques are employed which eliminate the organism and prevent its spread,

  • in cases where liquid waste discharges are contaminated, introduce official controls on the disposal of solid or liquid waste discharges from industrial processing or packaging premises handling listed plant material;

(c)

establish a programme, where appropriate, for the replacement of all seed potato stocks over an appropriate period of time.

ANNEX VII

The officially approved waste disposal methods referred to in Annex VI paragraph 1, shall conform to the following provisions such that any identifiable risk of spreading the organism is obviated:

(i)

potato and tomato waste (including rejected potatoes and peelings and tomatoes) and any other solid waste associated with the potatoes and tomatoes (including soil, stones and other debris) shall be disposed by either,

  • disposal at an officially approved dedicated waste disposal site at which there is no identifiable risk of escape of the organism into the environment e.g. through seepage to agricultural land or contact with water sources which could be used for irrigation of agricultural land. The waste shall be conveyed directly to the site under containment conditions such that there is no risk of loss of the waste,

    or

  • incineration,

    or

  • other measures, provided that it has been established that there is no identifiable risk of the organism spreading; such measures to be notified to the Commission and to the other Member States.

(ii)

liquid waste: prior to disposal, liquid waste containing suspended solids shall be subjected to filtration or settlement processes to remove such solids. These solids shall be disposed of as set out in subparagraph (i).

The liquid waste shall then be either:

  • heated to a minimum of 60 °C throughout the entire volume during at least 30 minutes prior to disposal,

    or

  • otherwise disposed of subject to official approval and under official control such that there is no identifiable risk that the waste could come into contact with agricultural land or water sources which could be used for irrigation of agricultural land. The details thereof shall be notified to the other Member States and to the Commission.

The options described in this Annex also apply to the waste associated with handling, disposal and processing of contaminated lots.

Yn ôl i’r brig

Options/Help

Print Options

You have chosen to open the Whole Directive

The Whole Directive you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Mae deddfwriaeth ar gael mewn fersiynau gwahanol:

Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.

Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Gweler y wybodaeth ychwanegol ochr yn ochr â’r cynnwys

Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Dewisiadau Agor

Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd

Close

Rhagor o Adnoddau

Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:

  • y PDF print gwreiddiol y fel adopted version that was used for the EU Official Journal
  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • pob fformat o’r holl ddogfennau cysylltiedig
  • slipiau cywiro
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Close

Llinell Amser Newidiadau

Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.

Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.

Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.

Close

Rhagor o Adnoddau

Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:

  • y PDF print gwreiddiol y fel adopted fersiwn a ddefnyddiwyd am y copi print
  • slipiau cywiro

liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys

  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill