- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Pwynt Penodol mewn Amser (31/12/2020)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Directive (EU) 2018/2001 of the European Parliament and of the Council of 11 December 2018 on the promotion of the use of energy from renewable sources (recast) (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
Share of energy from renewable sources in gross final consumption of energy, 2005 (S2005) | Target for share of energy from renewable sources in gross final consumption of energy, 2020 (S2020) | |
---|---|---|
Belgium | 2,2 % | 13 % |
Bulgaria | 9,4 % | 16 % |
Czech Republic | 6,1 % | 13 % |
Denmark | 17,0 % | 30 % |
Germany | 5,8 % | 18 % |
Estonia | 18,0 % | 25 % |
Ireland | 3,1 % | 16 % |
Greece | 6,9 % | 18 % |
Spain | 8,7 % | 20 % |
France | 10,3 % | 23 % |
Croatia | 12,6 % | 20 % |
Italy | 5,2 % | 17 % |
Cyprus | 2,9 % | 13 % |
Latvia | 32,6 % | 40 % |
Lithuania | 15,0 % | 23 % |
Luxembourg | 0,9 % | 11 % |
Hungary | 4,3 % | 13 % |
Malta | 0,0 % | 10 % |
Netherlands | 2,4 % | 14 % |
Austria | 23,3 % | 34 % |
Poland | 7,2 % | 15 % |
Portugal | 20,5 % | 31 % |
Romania | 17,8 % | 24 % |
Slovenia | 16,0 % | 25 % |
Slovak Republic | 6,7 % | 14 % |
Finland | 28,5 % | 38 % |
Sweden | 39,8 % | 49 % |
United Kingdom | 1,3 % | 15 % |
The following rule shall be applied for the purposes of accounting for electricity generated from hydropower in a given Member State:
N | = | reference year; |
QN(norm) | = | normalised electricity generated by all hydropower plants of the Member State in year N, for accounting purposes; |
Qi | = | the quantity of electricity actually generated in year i by all hydropower plants of the Member State measured in GWh, excluding production from pumped storage units using water that has previously been pumped uphill; |
Ci | = | the total installed capacity, net of pumped storage, of all hydropower plants of the Member State at the end of year i, measured in MW. |
The following rule shall be applied for the purposes of accounting for electricity generated from onshore wind power in a given Member State:
N | = | reference year; |
QN(norm) | = | normalised electricity generated by all onshore wind power plants of the Member State in year N, for accounting purposes; |
Qi | = | the quantity of electricity actually generated in year i by all onshore wind power plants of the Member State measured in GWh; |
Cj | = | the total installed capacity of all the onshore wind power plants of the Member State at the end of year j, measured in MW; |
n | = | 4 or the number of years preceding year N for which capacity and production data are available for the Member State in question, whichever is lower. |
The following rule shall be applied for the purposes of accounting for electricity generated from offshore wind power in a given Member State:
N | = | reference year; |
QN(norm) | = | normalised electricity generated by all offshore wind power plants of the Member State in year N, for accounting purposes; |
Qi | = | the quantity of electricity actually generated in year i by all offshore wind power plants of the Member State measured in GWh; |
Cj | = | the total installed capacity of all the offshore wind power plants of the Member State at the end of year j, measured in MW; |
n | = | 4 or the number of years preceding year N for which capacity and production data are available for the Member State in question, whichever is lower. |
Fuel | Energy content by weight (lower calorific value, MJ/kg) | Energy content by volume (lower calorific value, MJ/l) |
---|---|---|
FUELS FROM BIOMASS AND/OR BIOMASS PROCESSING OPERATIONS | ||
Bio-Propane | 46 | 24 |
Pure vegetable oil (oil produced from oil plants through pressing, extraction or comparable procedures, crude or refined but chemically unmodified) | 37 | 34 |
Biodiesel - fatty acid methyl ester (methyl-ester produced from oil of biomass origin) | 37 | 33 |
Biodiesel - fatty acid ethyl ester (ethyl-ester produced from oil of biomass origin) | 38 | 34 |
Biogas that can be purified to natural gas quality | 50 | — |
Hydrotreated (thermochemically treated with hydrogen) oil of biomass origin, to be used for replacement of diesel | 44 | 34 |
Hydrotreated (thermochemically treated with hydrogen) oil of biomass origin, to be used for replacement of petrol | 45 | 30 |
Hydrotreated (thermochemically treated with hydrogen) oil of biomass origin, to be used for replacement of jet fuel | 44 | 34 |
Hydrotreated oil (thermochemically treated with hydrogen) of biomass origin, to be used for replacement of liquefied petroleum gas | 46 | 24 |
Co-processed oil (processed in a refinery simultaneously with fossil fuel) of biomass or pyrolysed biomass origin to be used for replacement of diesel | 43 | 36 |
Co-processed oil (processed in a refinery simultaneously with fossil fuel) of biomass or pyrolysed biomass origin, to be used to replace petrol | 44 | 32 |
Co-processed oil (processed in a refinery simultaneously with fossil fuel) of biomass or pyrolysed biomass origin, to be used to replace jet fuel | 43 | 33 |
Co-processed oil (processed in a refinery simultaneously with fossil fuel) of biomass or pyrolysed biomass origin, to be used to replace liquefied petroleum gas | 46 | 23 |
RENEWABLE FUELS THAT CAN BE PRODUCED FROM VARIOUS RENEWABLE SOURCES, INCLUDING BIOMASS | ||
Methanol from renewable sources | 20 | 16 |
Ethanol from renewable sources | 27 | 21 |
Propanol from renewable sources | 31 | 25 |
Butanol from renewable sources | 33 | 27 |
Fischer-Tropsch diesel (a synthetic hydrocarbon or mixture of synthetic hydrocarbons to be used for replacement of diesel) | 44 | 34 |
Fischer-Tropsch petrol (a synthetic hydrocarbon or mixture of synthetic hydrocarbons produced from biomass, to be used for replacement of petrol) | 44 | 33 |
Fischer-Tropsch jet fuel (a synthetic hydrocarbon or mixture of synthetic hydrocarbons produced from biomass, to be used for replacement of jet fuel) | 44 | 33 |
Fischer-Tropsch liquefied petroleum gas (a synthetic hydrocarbon or mixture of synthetic hydrocarbons, to be used for replacement of liquefied petroleum gas | 46 | 24 |
DME (dimethylether) | 28 | 19 |
Hydrogen from renewable sources | 120 | — |
ETBE (ethyl-tertio-butyl-ether produced on the basis of ethanol) | 36 (of which 37 % from renewable sources) | 27 (of which 37 % from renewable sources) |
MTBE (methyl-tertio-butyl-ether produced on the basis of methanol) | 35 (of which 22 % from renewable sources) | 26 (of which 22 % from renewable sources) |
TAEE (tertiary-amyl-ethyl-ether produced on the basis of ethanol) | 38 (of which 29 % from renewable sources) | 29 (of which 29 % from renewable sources) |
TAME (tertiary-amyl-methyl-ether produced on the basis of methanol) | 36 (of which 18 % from renewable sources) | 28 (of which 18 % from renewable sources) |
THxEE (tertiary-hexyl-ethyl-ether produced on the basis of ethanol) | 38 (of which 25 % from renewable sources) | 30 (of which 25 % from renewable sources) |
THxME (tertiary-hexyl-methyl-ether produced on the basis of methanol) | 38 of which 14 % from renewable sources) | 30 (of which 14 % from renewable sources) |
FOSSIL FUELS | ||
Petrol | 43 | 32 |
Diesel | 43 | 36 |
The certification schemes or equivalent qualification schemes referred to in Article 18(3) shall be based on the following criteria:
The certification or qualification process shall be transparent and clearly defined by the Member States or by the administrative body that they appoint.
Installers of biomass, heat pump, shallow geothermal and solar photovoltaic and solar thermal energy shall be certified by an accredited training programme or training provider.
The accreditation of the training programme or provider shall be effected by Member States or by the administrative body that they appoint. The accrediting body shall ensure that the training programme offered by the training provider has continuity and regional or national coverage. The training provider shall have adequate technical facilities to provide practical training, including some laboratory equipment or corresponding facilities to provide practical training. The training provider shall also offer in addition to the basic training, shorter refresher courses on topical issues, including on new technologies, to enable life-long learning in installations. The training provider may be the manufacturer of the equipment or system, institutes or associations.
The training leading to certification or qualification of an installer shall include theoretical and practical parts. At the end of the training, the installer must have the skills required to install the relevant equipment and systems to meet the performance and reliability needs of the customer, incorporate quality craftsmanship, and comply with all applicable codes and standards, including energy and eco-labelling.
The training course shall end with an examination leading to a certificate or qualification. The examination shall include a practical assessment of successfully installing biomass boilers or stoves, heat pumps, shallow geothermal installations, solar photovoltaic or solar thermal installations.
The certification schemes or equivalent qualification schemes referred to in Article 18(3) shall take due account of the following guidelines:
Accredited training programmes should be offered to installers with work experience, who have undergone, or are undergoing, the following types of training:
in the case of biomass boiler and stove installers: training as a plumber, pipe fitter, heating engineer or technician of sanitary and heating or cooling equipment as a prerequisite;
in the case of heat pump installers: training as a plumber or refrigeration engineer and have basic electrical and plumbing skills (cutting pipe, soldering pipe joints, gluing pipe joints, lagging, sealing fittings, testing for leaks and installation of heating or cooling systems) as a prerequisite;
in the case of a solar photovoltaic or solar thermal installer: training as a plumber or electrician and have plumbing, electrical and roofing skills, including knowledge of soldering pipe joints, gluing pipe joints, sealing fittings, testing for plumbing leaks, ability to connect wiring, familiar with basic roof materials, flashing and sealing methods as a prerequisite; or
a vocational training scheme to provide an installer with adequate skills corresponding to a three years education in the skills referred to in point (a), (b) or (c), including both classroom and workplace learning.
The theoretical part of the biomass stove and boiler installer training should give an overview of the market situation of biomass and cover ecological aspects, biomass fuels, logistics, fire protection, related subsidies, combustion techniques, firing systems, optimal hydraulic solutions, cost and profitability comparison as well as the design, installation and maintenance of biomass boilers and stoves. The training should also provide good knowledge of any European standards for technology and biomass fuels, such as pellets, and biomass related national and Union law.
The theoretical part of the heat pump installer training should give an overview of the market situation for heat pumps and cover geothermal resources and ground source temperatures of different regions, soil and rock identification for thermal conductivity, regulations on using geothermal resources, feasibility of using heat pumps in buildings and determining the most suitable heat pump system, and knowledge about their technical requirements, safety, air filtering, connection with the heat source and system layout. The training should also provide good knowledge of any European standards for heat pumps, and of relevant national and Union law. The installer should demonstrate the following key competences:
a basic understanding of the physical and operation principles of a heat pump, including characteristics of the heat pump circle: context between low temperatures of the heat sink, high temperatures of the heat source, and the efficiency of the system, determination of the coefficient of performance and seasonal performance factor (SPF);
an understanding of the components and their function within a heat pump circle, including the compressor, expansion valve, evaporator, condenser, fixtures and fittings, lubricating oil, refrigerant, superheating and sub-cooling and cooling possibilities with heat pumps; and
the ability to choose and size the components in typical installation situations, including determining the typical values of the heat load of different buildings and for hot water production based on energy consumption, determining the capacity of the heat pump on the heat load for hot water production, on the storage mass of the building and on interruptible current supply; determine the buffer tank component and its volume and integration of a second heating system.
The theoretical part of the solar photovoltaic and solar thermal installer training should give an overview of the market situation of solar products and cost and profitability comparisons, and cover ecological aspects, components, characteristics and dimensioning of solar systems, selection of accurate systems and dimensioning of components, determination of the heat demand, fire protection, related subsidies, as well as the design, installation and maintenance of solar photovoltaic and solar thermal installations. The training should also provide good knowledge of any European standards for technology, and certification such as Solar Keymark, and related national and Union law. The installer should demonstrate the following key competences:
the ability to work safely using the required tools and equipment and implementing safety codes and standards and to identify plumbing, electrical and other hazards associated with solar installations;
the ability to identify systems and their components specific to active and passive systems, including the mechanical design, and to determine the components' location and system layout and configuration;
the ability to determine the required installation area, orientation and tilt for the solar photovoltaic and solar water heater, taking account of shading, solar access, structural integrity, the appropriateness of the installation for the building or the climate and to identify different installation methods suitable for roof types and the balance of system equipment required for the installation; and
for solar photovoltaic systems in particular, the ability to adapt the electrical design, including determining design currents, selecting appropriate conductor types and ratings for each electrical circuit, determining appropriate size, ratings and locations for all associated equipment and subsystems and selecting an appropriate interconnection point.
The installer certification should be time restricted, so that a refresher seminar or event would be necessary for continued certification.
a Regulation (EC) No 1069/2009 of the European Parliament and of the Council of 21 October 2009 laying down health rules as regards animal by-products and derived products not intended for human consumption and repealing Regulation (EC) No 1774/2002 (Animal by-products Regulation) (OJ L 300, 14.11.2009, p. 1). | ||
Biofuel production pathway | Greenhouse gas emissions saving – typical value | Greenhouse gas emissions saving – default value |
---|---|---|
sugar beet ethanol (no biogas from slop, natural gas as process fuel in conventional boiler) | 67 % | 59 % |
sugar beet ethanol (with biogas from slop, natural gas as process fuel in conventional boiler) | 77 % | 73 % |
sugar beet ethanol (no biogas from slop, natural gas as process fuel in CHP plant (*)) | 73 % | 68 % |
sugar beet ethanol (with biogas from slop, natural gas as process fuel in CHP plant (*)) | 79 % | 76 % |
sugar beet ethanol (no biogas from slop, lignite as process fuel in CHP plant (*)) | 58 % | 47 % |
sugar beet ethanol (with biogas from slop, lignite as process fuel in CHP plant (*)) | 71 % | 64 % |
corn (maize) ethanol (natural gas as process fuel in conventional boiler) | 48 % | 40 % |
corn (maize) ethanol, (natural gas as process fuel in CHP plant (*)) | 55 % | 48 % |
corn (maize) ethanol (lignite as process fuel in CHP plant (*)) | 40 % | 28 % |
corn (maize) ethanol (forest residues as process fuel in CHP plant (*)) | 69 % | 68 % |
other cereals excluding maize ethanol (natural gas as process fuel in conventional boiler) | 47 % | 38 % |
other cereals excluding maize ethanol (natural gas as process fuel in CHP plant (*)) | 53 % | 46 % |
other cereals excluding maize ethanol (lignite as process fuel in CHP plant (*)) | 37 % | 24 % |
other cereals excluding maize ethanol (forest residues as process fuel in CHP plant (*)) | 67 % | 67 % |
sugar cane ethanol | 70 % | 70 % |
the part from renewable sources of ethyl-tertio-butyl-ether (ETBE) | Equal to that of the ethanol production pathway used | |
the part from renewable sources of tertiary-amyl-ethyl-ether (TAEE) | Equal to that of the ethanol production pathway used | |
rape seed biodiesel | 52 % | 47 % |
sunflower biodiesel | 57 % | 52 % |
soybean biodiesel | 55 % | 50 % |
[X1palm oil biodiesel (open effluent pond) | 33 % | 20 %] |
palm oil biodiesel (process with methane capture at oil mill) | 51 % | 45 % |
waste cooking oil biodiesel | 88 % | 84 % |
animal fats from rendering biodiesel (**) | 84 % | 78 % |
hydrotreated vegetable oil from rape seed | 51 % | 47 % |
hydrotreated vegetable oil from sunflower | 58 % | 54 % |
hydrotreated vegetable oil from soybean | 55 % | 51 % |
hydrotreated vegetable oil from palm oil (open effluent pond) | 34 % | 22 % |
hydrotreated vegetable oil from palm oil (process with methane capture at oil mill) | 53 % | 49 % |
hydrotreated oil from waste cooking oil | 87 % | 83 % |
hydrotreated oil from animal fats from rendering (**) | 83 % | 77 % |
pure vegetable oil from rape seed | 59 % | 57 % |
pure vegetable oil from sunflower | 65 % | 64 % |
pure vegetable oil from soybean | 63 % | 61 % |
pure vegetable oil from palm oil (open effluent pond) | 40 % | 30 % |
pure vegetable oil from palm oil (process with methane capture at oil mill) | 59 % | 57 % |
pure oil from waste cooking oil | 98 % | 98 % |
(*)Default values for processes using CHP are valid only if all the process heat is supplied by CHP.(**)Applies only to biofuels produced from animal by-products classified as category 1 and 2 material in accordance with Regulation (EC) No 1069/2009 of the European Parliament and of the Councila, for which emissions related to hygenisation as part of the rendering are not considered. |
Editorial Information
Biofuel production pathway | Greenhouse gas emissions saving - typical value | Greenhouse gas emissions saving - default value |
---|---|---|
wheat straw ethanol | 85 % | 83 % |
[X1waste wood Fischer-Tropsch diesel in free-standing plant | 83 % | 83 %] |
farmed wood Fischer-Tropsch diesel in free-standing plant | 82 % | 82 % |
[X1waste wood Fischer-Tropsch petrol in free-standing plant | 83 % | 83 %] |
farmed wood Fischer-Tropsch petrol in free-standing plant | 82 % | 82 % |
[X1waste wood dimethylether (DME) in free-standing plant | 84 % | 84 %] |
farmed wood dimethylether (DME) in free-standing plant | 83 % | 83 % |
[X1waste wood methanol in free-standing plant | 84 % | 84 %] |
farmed wood methanol in free-standing plant | 83 % | 83 % |
Fischer-Tropsch diesel from black-liquor gasification integrated with pulp mill | 89 % | 89 % |
Fischer-Tropsch petrol from black-liquor gasification integrated with pulp mill | 89 % | 89 % |
dimethylether (DME) from black-liquor gasification integrated with pulp mill | 89 % | 89 % |
Methanol from black-liquor gasification integrated with pulp mill | 89 % | 89 % |
the part from renewable sources of methyl-tertio-butyl-ether (MTBE) | Equal to that of the methanol production pathway used |
greenhouse gas emissions from the production and use of biofuels shall be calculated as:
E = eec + el + ep + etd + eu – esca – eccs – eccr,
where
E | = | total emissions from the use of the fuel; |
eec | = | emissions from the extraction or cultivation of raw materials; |
el | = | annualised emissions from carbon stock changes caused by land-use change; |
ep | = | emissions from processing; |
etd | = | emissions from transport and distribution; |
eu | = | emissions from the fuel in use; |
esca | = | emission savings from soil carbon accumulation via improved agricultural management; |
eccs | = | emission savings from CO2 capture and geological storage; and |
eccr | = | emission savings from CO2 capture and replacement. |
Emissions from the manufacture of machinery and equipment shall not be taken into account.
Greenhouse gas emissions from the production and use of bioliquids shall be calculated as for biofuels (E), but with the extension necessary for including the energy conversion to electricity and/or heat and cooling produced, as follows:
For energy installations delivering only electricity:
where
=
Total greenhouse gas emissions from the final energy commodity.
=
Total greenhouse gas emissions of the bioliquid before end-conversion.
=
The electrical efficiency, defined as the annual electricity produced divided by the annual bioliquid input based on its energy content.
=
The heat efficiency, defined as the annual useful heat output divided by the annual bioliquid input based on its energy content.
For the electricity or mechanical energy coming from energy installations delivering useful heat together with electricity and/or mechanical energy:
For the useful heat coming from energy installations delivering heat together with electricity and/or mechanical energy:
where:
=
Total greenhouse gas emissions from the final energy commodity.
=
Total greenhouse gas emissions of the bioliquid before end-conversion.
=
The electrical efficiency, defined as the annual electricity produced divided by the annual fuel input based on its energy content.
=
The heat efficiency, defined as the annual useful heat output divided by the annual fuel input based on its energy content.
=
Fraction of exergy in the electricity, and/or mechanical energy, set to 100 % (Cel = 1).
=
Carnot efficiency (fraction of exergy in the useful heat).
The Carnot efficiency, Ch, for useful heat at different temperatures is defined as:
where
=
Temperature, measured in absolute temperature (kelvin) of the useful heat at point of delivery.
=
Temperature of surroundings, set at 273,15 kelvin (equal to 0 °C)
If the excess heat is exported for heating of buildings, at a temperature below 150 °C (423,15 kelvin), Ch can alternatively be defined as follows:
=
Carnot efficiency in heat at 150 °C (423,15 kelvin), which is: 0,3546
For the purposes of that calculation, the following definitions apply:
‘cogeneration’ means the simultaneous generation in one process of thermal energy and electricity and/or mechanical energy;
‘useful heat’ means heat generated to satisfy an economical justifiable demand for heat, for heating and cooling purposes;
‘economically justifiable demand’ means the demand that does not exceed the needs for heat or cooling and which would otherwise be satisfied at market conditions.
greenhouse gas emissions from biofuels, E, shall be expressed in terms of grams of CO2 equivalent per MJ of fuel, g CO2eq/MJ.
greenhouse gas emissions from bioliquids, EC, in terms of grams of CO2 equivalent per MJ of final energy commodity (heat or electricity), g CO2eq/MJ.
When heating and cooling are co-generated with electricity, emissions shall be allocated between heat and electricity (as under 1(b)), irrespective if the heat is used for actual heating purposes or for cooling(2).
Where the greenhouse gas emissions from the extraction or cultivation of raw materials eec are expressed in unit g CO2eq/dry-ton of feedstock, the conversion to grams of CO2 equivalent per MJ of fuel, g CO2eq/MJ, shall be calculated as follows(3):
where
Emissions per dry-ton feedstock shall be calculated as follows:
greenhouse gas emissions savings from biofuels:
SAVING = (EF(t) – EB)/EF(t),
where
EB | = | total emissions from the biofuel; and |
EF(t) | = | total emissions from the fossil fuel comparator for transport |
greenhouse gas emissions savings from heat and cooling, and electricity being generated from bioliquids:
SAVING = (ECF(h&c,el) – ECB(h&c,el))/ECF(h&c,el),
where
=
total emissions from the heat or electricity; and
=
total emissions from the fossil fuel comparator for useful heat or electricity.
CO2 | : | 1 |
N2O | : | 298 |
CH4 | : | 25 |
el = (CSR – CSA) × 3,664 × 1/20 × 1/P – eB,(5)
where
a Cropland as defined by IPCC. | ||
b Perennial crops are defined as multi-annual crops, the stem of which is usually not annually harvested such as short rotation coppice and oil palm. | ||
el | = | annualised greenhouse gas emissions from carbon stock change due to land-use change (measured as mass (grams) of CO2-equivalent per unit of biofuel or bioliquid energy (megajoules)). ‘Cropland’a and ‘perennial cropland’b shall be regarded as one land use; |
CSR | = | the carbon stock per unit area associated with the reference land-use (measured as mass (tonnes) of carbon per unit area, including both soil and vegetation). The reference land-use shall be the land-use in January 2008 or 20 years before the raw material was obtained, whichever was the later; |
CSA | = | the carbon stock per unit area associated with the actual land-use (measured as mass (tonnes) of carbon per unit area, including both soil and vegetation). In cases where the carbon stock accumulates over more than one year, the value attributed to CSA shall be the estimated stock per unit area after 20 years or when the crop reaches maturity, whichever the earlier; |
P | = | the productivity of the crop (measured as biofuel or bioliquid energy per unit area per year) and |
eB | = | bonus of 29 g CO2eq/MJ biofuel or bioliquid if biomass is obtained from restored degraded land under the conditions laid down in point 8. |
was not in use for agriculture or any other activity in January 2008; and
is severely degraded land, including such land that was formerly in agricultural use.
The bonus of 29 g CO2eq/MJ shall apply for a period of up to 20 years from the date of conversion of the land to agricultural use, provided that a steady increase in carbon stocks as well as a sizable reduction in erosion phenomena for land falling under (b) are ensured.
In accounting for the consumption of electricity not produced within the fuel production plant, the greenhouse gas emissions intensity of the production and distribution of that electricity shall be assumed to be equal to the average emission intensity of the production and distribution of electricity in a defined region. By way of derogation from this rule, producers may use an average value for an individual electricity production plant for electricity produced by that plant, if that plant is not connected to the electricity grid.
Emissions from processing shall include emissions from drying of interim products and materials where relevant.
Emissions of non-CO2 greenhouse gases (N2O and CH4) of the fuel in use shall be included in the eu factor for bioliquids.
where
=
Temperature, measured in absolute temperature (kelvin) of the useful heat at point of delivery.
=
Temperature of surroundings, set at 273,15 kelvin (equal to 0 °C)
If the excess heat is exported for heating of buildings, at a temperature below 150 °C (423,15 kelvin), Ch can alternatively be defined as follows:
=
Carnot efficiency in heat at 150 °C (423,15 kelvin), which is: 0,3546
For the purposes of that calculation, the actual efficiencies shall be used, defined as the annual mechanical energy, electricity and heat produced respectively divided by the annual energy input.
For the purposes of that calculation, the following definitions apply:
‘cogeneration’ shall mean the simultaneous generation in one process of thermal energy and electrical and/or mechanical energy;
‘useful heat’ shall mean heat generated to satisfy an economical justifiable demand for heat, for heating or cooling purposes;
‘economically justifiable demand’ shall mean the demand that does not exceed the needs for heat or cooling and which would otherwise be satisfied at market conditions.
In the case of biofuels and bioliquids, all co-products shall be taken into account for the purposes of that calculation. No emissions shall be allocated to wastes and residues. Co-products that have a negative energy content shall be considered to have an energy content of zero for the purposes of the calculation.
Wastes and residues, including tree tops and branches, straw, husks, cobs and nut shells, and residues from processing, including crude glycerine (glycerine that is not refined) and bagasse, shall be considered to have zero life-cycle greenhouse gas emissions up to the process of collection of those materials irrespectively of whether they are processed to interim products before being transformed into the final product.
In the case of fuels produced in refineries, other than the combination of processing plants with boilers or cogeneration units providing heat and/or electricity to the processing plant, the unit of analysis for the purposes of the calculation referred to in point 17 shall be the refinery.
For bioliquids used for the production of electricity, for the purposes of the calculation referred to in point 3, the fossil fuel comparator ECF(e) shall be 183 g CO2eq/MJ.
For bioliquids used for the production of useful heat, as well as for the production of heating and/or cooling, for the purposes of the calculation referred to in point 3, the fossil fuel comparator ECF(h&c) shall be 80 g CO2eq/MJ.
Disaggregated default values for cultivation: ‘eec’ as defined in Part C of this Annex, including soil N2O emissions
a Applies only to biofuels produced from animal by-products classified as category 1 and 2 material in accordance with Regulation (EC) No 1069/2009, for which emissions related to hygenisation as part of the rendering are not considered. | ||
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
sugar beet ethanol | 9,6 | 9,6 |
corn (maize) ethanol | 25,5 | 25,5 |
other cereals excluding corn (maize) ethanol | 27,0 | 27,0 |
sugar cane ethanol | 17,1 | 17,1 |
the part from renewable sources of ETBE | Equal to that of the ethanol production pathway used | |
the part from renewable sources of TAEE | Equal to that of the ethanol production pathway used | |
rape seed biodiesel | 32,0 | 32,0 |
sunflower biodiesel | 26,1 | 26,1 |
soybean biodiesel | 21,2 | 21,2 |
[X1palm oil biodiesel | 26,0 | 26,0] |
waste cooking oil biodiesel | 0 | 0 |
animal fats from rendering biodiesela | 0 | 0 |
hydrotreated vegetable oil from rape seed | 33,4 | 33,4 |
hydrotreated vegetable oil from sunflower | 26,9 | 26,9 |
hydrotreated vegetable oil from soybean | 22,1 | 22,1 |
[X1hydrotreated vegetable oil from palm oil | 27,3 | 27,3] |
hydrotreated oil from waste cooking oil | 0 | 0 |
hydrotreated oil from animal fats from renderinga | 0 | 0 |
pure vegetable oil from rape seed | 33,4 | 33,4 |
pure vegetable oil from sunflower | 27,2 | 27,2 |
pure vegetable oil from soybean | 22,2 | 22,2 |
pure vegetable oil from palm oil | 27,1 | 27,1 |
pure oil from waste cooking oil | 0 | 0 |
Disaggregated default values for cultivation: ‘eec’ – for soil N2O emissions only (these are already included in the disaggregated values for cultivation emissions in the ‘eec’ table)
a Note: applies only to biofuels produced from animal by-products classified as category 1 and 2 material in accordance with Regulation (EC) No 1069/2009, for which emissions related to hygenisation as part of the rendering are not considered. | ||
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
sugar beet ethanol | 4,9 | 4,9 |
corn (maize) ethanol | 13,7 | 13,7 |
other cereals excluding corn (maize) ethanol | 14,1 | 14,1 |
sugar cane ethanol | 2,1 | 2,1 |
the part from renewable sources of ETBE | Equal to that of the ethanol production pathway used | |
the part from renewable sources of TAEE | Equal to that of the ethanol production pathway used | |
rape seed biodiesel | 17,6 | 17,6 |
sunflower biodiesel | 12,2 | 12,2 |
soybean biodiesel | 13,4 | 13,4 |
palm oil biodiesel | 16,5 | 16,5 |
waste cooking oil biodiesel | 0 | 0 |
animal fats from rendering biodiesela | 0 | 0 |
hydrotreated vegetable oil from rape seed | 18,0 | 18,0 |
hydrotreated vegetable oil from sunflower | 12,5 | 12,5 |
hydrotreated vegetable oil from soybean | 13,7 | 13,7 |
hydrotreated vegetable oil from palm oil | 16,9 | 16,9 |
hydrotreated oil from waste cooking oil | 0 | 0 |
hydrotreated oil from animal fats from renderinga | 0 | 0 |
pure vegetable oil from rape seed | 17,6 | 17,6 |
pure vegetable oil from sunflower | 12,2 | 12,2 |
pure vegetable oil from soybean | 13,4 | 13,4 |
pure vegetable oil from palm oil | 16,5 | 16,5 |
pure oil from waste cooking oil | 0 | 0 |
Disaggregated default values for processing: ‘ep’ as defined in Part C of this Annex
a Default values for processes using CHP are valid only if all the process heat is supplied by CHP. | ||
b Note: applies only to biofuels produced from animal by-products classified as category 1 and 2 material in accordance with Regulation (EC) No 1069/2009, for which emissions related to hygenisation as part of the rendering are not considered. | ||
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
sugar beet ethanol (no biogas from slop, natural gas as process fuel in conventional boiler) | 18,8 | 26,3 |
sugar beet ethanol (with biogas from slop, natural gas as process fuel in conventional boiler) | 9,7 | 13,6 |
sugar beet ethanol (no biogas from slop, natural gas as process fuel in CHP planta) | 13,2 | 18,5 |
sugar beet ethanol (with biogas from slop, natural gas as process fuel in CHP planta) | 7,6 | 10,6 |
sugar beet ethanol (no biogas from slop, lignite as process fuel in CHP planta) | 27,4 | 38,3 |
sugar beet ethanol (with biogas from slop, lignite as process fuel in CHP planta) | 15,7 | 22,0 |
corn (maize) ethanol (natural gas as process fuel in conventional boiler) | 20,8 | 29,1 |
corn (maize) ethanol, (natural gas as process fuel in CHP planta) | 14,8 | 20,8 |
corn (maize) ethanol (lignite as process fuel in CHP planta) | 28,6 | 40,1 |
corn (maize) ethanol (forest residues as process fuel in CHP planta) | 1,8 | 2,6 |
other cereals excluding maize ethanol (natural gas as process fuel in conventional boiler) | 21,0 | 29,3 |
other cereals excluding maize ethanol (natural gas as process fuel in CHP planta) | 15,1 | 21,1 |
other cereals excluding maize ethanol (lignite as process fuel in CHP planta) | 30,3 | 42,5 |
other cereals excluding maize ethanol (forest residues as process fuel in CHP planta) | 1,5 | 2,2 |
sugar cane ethanol | 1,3 | 1,8 |
the part from renewable sources of ETBE | Equal to that of the ethanol production pathway used | |
the part from renewable sources of TAEE | Equal to that of the ethanol production pathway used | |
rape seed biodiesel | 11,7 | 16,3 |
sunflower biodiesel | 11,8 | 16,5 |
soybean biodiesel | 12,1 | 16,9 |
palm oil biodiesel (open effluent pond) | 30,4 | 42,6 |
palm oil biodiesel (process with methane capture at oil mill) | 13,2 | 18,5 |
waste cooking oil biodiesel | 9,3 | 13,0 |
animal fats from rendering biodieselb | 13,6 | 19,1 |
hydrotreated vegetable oil from rape seed | 10,7 | 15,0 |
hydrotreated vegetable oil from sunflower | 10,5 | 14,7 |
hydrotreated vegetable oil from soybean | 10,9 | 15,2 |
hydrotreated vegetable oil from palm oil (open effluent pond) | 27,8 | 38,9 |
hydrotreated vegetable oil from palm oil (process with methane capture at oil mill) | 9,7 | 13,6 |
hydrotreated oil from waste cooking oil | 10,2 | 14,3 |
hydrotreated oil from animal fats from renderingb | 14,5 | 20,3 |
[X1pure vegetable oil from rape seed | 3,7 | 5,2] |
pure vegetable oil from sunflower | 3,8 | 5,4 |
pure vegetable oil from soybean | 4,2 | 5,9 |
pure vegetable oil from palm oil (open effluent pond) | 22,6 | 31,7 |
pure vegetable oil from palm oil (process with methane capture at oil mill) | 4,7 | 6,5 |
pure oil from waste cooking oil | 0,6 | 0,8 |
Disaggregated default values for oil extraction only (these are already included in the disaggregated values for processing emissions in the ‘ep’ table)
a Note: applies only to biofuels produced from animal by-products classified as category 1 and 2 material in accordance with Regulation (EC) No 1069/2009, for which emissions related to hygenisation as part of the rendering are not considered. | ||
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
rape seed biodiesel | 3,0 | 4,2 |
sunflower biodiesel | 2,9 | 4,0 |
soybean biodiesel | 3,2 | 4,4 |
palm oil biodiesel (open effluent pond) | 20,9 | 29,2 |
palm oil biodiesel (process with methane capture at oil mill) | 3,7 | 5,1 |
waste cooking oil biodiesel | 0 | 0 |
animal fats from rendering biodiesela | 4,3 | 6,1 |
hydrotreated vegetable oil from rape seed | 3,1 | 4,4 |
hydrotreated vegetable oil from sunflower | 3,0 | 4,1 |
hydrotreated vegetable oil from soybean | 3,3 | 4,6 |
hydrotreated vegetable oil from palm oil (open effluent pond) | 21,9 | 30,7 |
hydrotreated vegetable oil from palm oil (process with methane capture at oil mill) | 3,8 | 5,4 |
hydrotreated oil from waste cooking oil | 0 | 0 |
hydrotreated oil from animal fats from renderinga | 4,3 | 6,0 |
pure vegetable oil from rape seed | 3,1 | 4,4 |
pure vegetable oil from sunflower | 3,0 | 4,2 |
pure vegetable oil from soybean | 3,4 | 4,7 |
pure vegetable oil from palm oil (open effluent pond) | 21,8 | 30,5 |
pure vegetable oil from palm oil (process with methane capture at oil mill) | 3,8 | 5,3 |
pure oil from waste cooking oil | 0 | 0 |
Disaggregated default values for transport and distribution: ‘etd’ as defined in Part C of this Annex
a Default values for processes using CHP are valid only if all the process heat is supplied by CHP. | ||
b Note: applies only to biofuels produced from animal by-products classified as category 1 and 2 material in accordance with Regulation (EC) No 1069/2009, for which emissions related to hygenisation as part of the rendering are not considered. | ||
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
sugar beet ethanol (no biogas from slop, natural gas as process fuel in conventional boiler) | 2,3 | 2,3 |
sugar beet ethanol (with biogas from slop, natural gas as process fuel in conventional boiler) | 2,3 | 2,3 |
sugar beet ethanol (no biogas from slop, natural gas as process fuel in CHP planta) | 2,3 | 2,3 |
sugar beet ethanol (with biogas from slop, natural gas as process fuel in CHP planta) | 2,3 | 2,3 |
sugar beet ethanol (no biogas from slop, lignite as process fuel in CHP planta) | 2,3 | 2,3 |
sugar beet ethanol (with biogas from slop, lignite as process fuel in CHP planta) | 2,3 | 2,3 |
corn (maize) ethanol (natural gas as process fuel in CHP planta) | 2,2 | 2,2 |
corn (maize) ethanol (natural gas as process fuel in conventional boiler) | 2,2 | 2,2 |
corn (maize) ethanol (lignite as process fuel in CHP planta) | 2,2 | 2,2 |
corn (maize) ethanol (forest residues as process fuel in CHP planta) | 2,2 | 2,2 |
other cereals excluding maize ethanol (natural gas as process fuel in conventional boiler) | 2,2 | 2,2 |
other cereals excluding maize ethanol (natural gas as process fuel in CHP planta) | 2,2 | 2,2 |
other cereals excluding maize ethanol (lignite as process fuel in CHP planta) | 2,2 | 2,2 |
other cereals excluding maize ethanol (forest residues as process fuel in CHP planta) | 2,2 | 2,2 |
sugar cane ethanol | 9,7 | 9,7 |
the part from renewable sources of ETBE | Equal to that of the ethanol production pathway used | |
the part from renewable sources of TAEE | Equal to that of the ethanol production pathway used | |
rape seed biodiesel | 1,8 | 1,8 |
sunflower biodiesel | 2,1 | 2,1 |
soybean biodiesel | 8,9 | 8,9 |
palm oil biodiesel (open effluent pond) | 6,9 | 6,9 |
palm oil biodiesel (process with methane capture at oil mill) | 6,9 | 6,9 |
waste cooking oil biodiesel | 1,9 | 1,9 |
[X1animal fats from rendering biodiesel a | 1,6 | 1,6] |
hydrotreated vegetable oil from rape seed | 1,7 | 1,7 |
hydrotreated vegetable oil from sunflower | 2,0 | 2,0 |
hydrotreated vegetable oil from soybean | 9,2 | 9,2 |
hydrotreated vegetable oil from palm oil (open effluent pond) | 7,0 | 7,0 |
hydrotreated vegetable oil from palm oil (process with methane capture at oil mill) | 7,0 | 7,0 |
hydrotreated oil from waste cooking oil | 1,7 | 1,7 |
hydrotreated oil from animal fats from renderingb | 1,5 | 1,5 |
pure vegetable oil from rape seed | 1,4 | 1,4 |
pure vegetable oil from sunflower | 1,7 | 1,7 |
pure vegetable oil from soybean | 8,8 | 8,8 |
pure vegetable oil from palm oil (open effluent pond) | 6,7 | 6,7 |
pure vegetable oil from palm oil (process with methane capture at oil mill) | 6,7 | 6,7 |
pure oil from waste cooking oil | 1,4 | 1,4 |
Disaggregated default values for transport and distribution of final fuel only. These are already included in the table of ‘transport and distribution emissions etd’ as defined in Part C of this Annex, but the following values are useful if an economic operator wishes to declare actual transport emissions for crops or oil transport only).
a Default values for processes using CHP are valid only if all the process heat is supplied by CHP. | ||
b Note: applies only to biofuels produced from animal by-products classified as category 1 and 2 material in accordance with Regulation (EC) No 1069/2009, for which emissions related to hygenisation as part of the rendering are not considered. | ||
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
sugar beet ethanol (no biogas from slop, natural gas as process fuel in conventional boiler) | 1,6 | 1,6 |
sugar beet ethanol (with biogas from slop, natural gas as process fuel in conventional boiler) | 1,6 | 1,6 |
sugar beet ethanol (no biogas from slop, natural gas as process fuel in CHP planta) | 1,6 | 1,6 |
sugar beet ethanol (with biogas from slop, natural gas as process fuel in CHP planta) | 1,6 | 1,6 |
sugar beet ethanol (no biogas from slop, lignite as process fuel in CHP planta) | 1,6 | 1,6 |
sugar beet ethanol (with biogas from slop, lignite as process fuel in CHP planta) | 1,6 | 1,6 |
corn (maize) ethanol (natural gas as process fuel in conventional boiler) | 1,6 | 1,6 |
corn (maize) ethanol (natural gas as process fuel in CHP planta) | 1,6 | 1,6 |
corn (maize) ethanol (lignite as process fuel in CHP planta) | 1,6 | 1,6 |
corn (maize) ethanol (forest residues as process fuel in CHP planta) | 1,6 | 1,6 |
other cereals excluding maize ethanol (natural gas as process fuel in conventional boiler) | 1,6 | 1,6 |
other cereals excluding maize ethanol (natural gas as process fuel in CHP planta) | 1,6 | 1,6 |
other cereals excluding maize ethanol (lignite as process fuel in CHP planta) | 1,6 | 1,6 |
other cereals excluding maize ethanol (forest residues as process fuel in CHP planta) | 1,6 | 1,6 |
sugar cane ethanol | 6,0 | 6,0 |
the part of ethyl-tertio-butyl-ether (ETBE) from renewable ethanol | Will be considered to be equal to that of the ethanol production pathway used | |
the part of tertiary-amyl-ethyl-ether (TAEE) from renewable ethanol | Will be considered to be equal to that of the ethanol production pathway used | |
rape seed biodiesel | 1,3 | 1,3 |
sunflower biodiesel | 1,3 | 1,3 |
soybean biodiesel | 1,3 | 1,3 |
palm oil biodiesel (open effluent pond) | 1,3 | 1,3 |
palm oil biodiesel (process with methane capture at oil mill) | 1,3 | 1,3 |
waste cooking oil biodiesel | 1,3 | 1,3 |
animal fats from rendering biodieselb | 1,3 | 1,3 |
hydrotreated vegetable oil from rape seed | 1,2 | 1,2 |
hydrotreated vegetable oil from sunflower | 1,2 | 1,2 |
hydrotreated vegetable oil from soybean | 1,2 | 1,2 |
hydrotreated vegetable oil from palm oil (open effluent pond) | 1,2 | 1,2 |
hydrotreated vegetable oil from palm oil (process with methane capture at oil mill) | 1,2 | 1,2 |
hydrotreated oil from waste cooking oil | 1,2 | 1,2 |
hydrotreated oil from animal fats from renderingb | 1,2 | 1,2 |
pure vegetable oil from rape seed | 0,8 | 0,8 |
pure vegetable oil from sunflower | 0,8 | 0,8 |
pure vegetable oil from soybean | 0,8 | 0,8 |
pure vegetable oil from palm oil (open effluent pond) | 0,8 | 0,8 |
pure vegetable oil from palm oil (process with methane capture at oil mill) | 0,8 | 0,8 |
pure oil from waste cooking oil | 0,8 | 0,8 |
Total for cultivation, processing, transport and distribution
a Default values for processes using CHP are valid only if all the process heat is supplied by CHP. | ||
b Note: applies only to biofuels produced from animal by-products classified as category 1 and 2 material in accordance with Regulation (EC) No 1069/2009, for which emissions related to hygenisation as part of the rendering are not considered. | ||
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
sugar beet ethanol (no biogas from slop, natural gas as process fuel in conventional boiler) | 30,7 | 38,2 |
sugar beet ethanol (with biogas from slop, natural gas as process fuel in conventional boiler) | 21,6 | 25,5 |
sugar beet ethanol (no biogas from slop, natural gas as process fuel in CHP planta) | 25,1 | 30,4 |
sugar beet ethanol (with biogas from slop, natural gas as process fuel in CHP planta) | 19,5 | 22,5 |
sugar beet ethanol (no biogas from slop, lignite as process fuel in CHP planta) | 39,3 | 50,2 |
sugar beet ethanol (with biogas from slop, lignite as process fuel in CHP planta) | 27,6 | 33,9 |
corn (maize) ethanol (natural gas as process fuel in conventional boiler) | 48,5 | 56,8 |
corn (maize) ethanol, (natural gas as process fuel in CHP planta) | 42,5 | 48,5 |
corn (maize) ethanol (lignite as process fuel in CHP planta) | 56,3 | 67,8 |
corn (maize) ethanol (forest residues as process fuel in CHP planta) | 29,5 | 30,3 |
other cereals excluding maize ethanol (natural gas as process fuel in conventional boiler) | 50,2 | 58,5 |
other cereals excluding maize ethanol (natural gas as process fuel in CHP planta) | 44,3 | 50,3 |
other cereals excluding maize ethanol (lignite as process fuel in CHP planta) | 59,5 | 71,7 |
[X1other cereals excluding maize ethanol (forest residues as process fuel in CHP plant a | 30,7 | 31,4 |
sugar cane ethanol | 28,1 | 28,6] |
the part from renewable sources of ETBE | Equal to that of the ethanol production pathway used | |
the part from renewable sources of TAEE | Equal to that of the ethanol production pathway used | |
rape seed biodiesel | 45,5 | 50,1 |
sunflower biodiesel | 40,0 | 44,7 |
soybean biodiesel | 42,2 | 47,0 |
[X1palm oil biodiesel (open effluent pond) | 63,3 | 75,5 |
palm oil biodiesel (process with methane capture at oil mill) | 46,1 | 51,4] |
waste cooking oil biodiesel | 11,2 | 14,9 |
[X1animals fats from rendering biodiesel a | 15,2 | 20,7] |
hydrotreated vegetable oil from rape seed | 45,8 | 50,1 |
hydrotreated vegetable oil from sunflower | 39,4 | 43,6 |
hydrotreated vegetable oil from soybean | 42,2 | 46,5 |
[X1hydrotreated vegetable oil from palm oil (open effluent pond) | 62,1 | 73,2 |
hydrotreated vegetable oil from palm oil (process with methane capture at oil mill) | 44,0 | 47,9] |
hydrotreated oil from waste cooking oil | 11,9 | 16,0 |
hydrotreated oil from animal fats from renderingb | 16,0 | 21,8 |
pure vegetable oil from rape seed | 38,5 | 40,0 |
pure vegetable oil from sunflower | 32,7 | 34,3 |
pure vegetable oil from soybean | 35,2 | 36,9 |
[X1pure vegetable oil from palm oil (open effluent pond) | 56,4 | 65,5 |
pure vegetable oil from palm oil (process with methane capture at oil mill) | 38,5 | 40,3] |
pure oil from waste cooking oil | 2,0 | 2,2 |
Disaggregated default values for cultivation: ‘eec’ as defined in Part C of this Annex, including N2O emissions (including chipping of waste or farmed wood)
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
wheat straw ethanol | 1,8 | 1,8 |
waste wood Fischer-Tropsch diesel in free-standing plant | 3,3 | 3,3 |
farmed wood Fischer-Tropsch diesel in free-standing plant | 8,2 | 8,2 |
[X1waste wood Fischer-Tropsch petrol in free-standing plant | 3,3 | 3,3 |
farmed wood Fischer-Tropsch petrol in free-standing plant | 8,2 | 8,2] |
waste wood dimethylether (DME) in free-standing plant | 3,1 | 3,1 |
farmed wood dimethylether (DME) in free-standing plant | 7,6 | 7,6 |
waste wood methanol in free-standing plant | 3,1 | 3,1 |
farmed wood methanol in free-standing plant | 7,6 | 7,6 |
Fischer-Tropsch diesel from black-liquor gasification integrated with pulp mill | 2,5 | 2,5 |
Fischer-Tropsch petrol from black-liquor gasification integrated with pulp mill | 2,5 | 2,5 |
dimethylether (DME) from black-liquor gasification integrated with pulp mill | 2,5 | 2,5 |
Methanol from black-liquor gasification integrated with pulp mill | 2,5 | 2,5 |
the part from renewable sources of MTBE | Equal to that of the methanol production pathway used |
Disaggregated default values for soil N2O emissions (included in disaggregated default values for cultivation emissions in the ‘eec’ table)
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
wheat straw ethanol | 0 | 0 |
waste wood Fischer-Tropsch diesel in free-standing plant | 0 | 0 |
farmed wood Fischer-Tropsch diesel in free-standing plant | 4,4 | 4,4 |
waste wood Fischer-Tropsch petrol in free-standing plant | 0 | 0 |
farmed wood Fischer-Tropsch petrol in free-standing plant | 4,4 | 4,4 |
waste wood dimethylether (DME) in free-standing plant | 0 | 0 |
farmed wood dimethylether (DME) in free-standing plant | 4,1 | 4,1 |
waste wood methanol in free-standing plant | 0 | 0 |
farmed wood methanol in free-standing plant | 4,1 | 4,1 |
Fischer-Tropsch diesel from black-liquor gasification integrated with pulp mill | 0 | 0 |
Fischer-Tropsch petrol from black-liquor gasification integrated with pulp mill | 0 | 0 |
dimethylether (DME) from black-liquor gasification integrated with pulp mill | 0 | 0 |
Methanol from black-liquor gasification integrated with pulp mill | 0 | 0 |
the part from renewable sources of MTBE | Equal to that of the methanol production pathway used |
Disaggregated default values for processing: ‘ep’ as defined in Part C of this Annex
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
wheat straw ethanol | 4,8 | 6,8 |
waste wood Fischer-Tropsch diesel in free-standing plant | 0,1 | 0,1 |
farmed wood Fischer-Tropsch diesel in free-standing plant | 0,1 | 0,1 |
waste wood Fischer-Tropsch petrol in free-standing plant | 0,1 | 0,1 |
farmed wood Fischer-Tropsch petrol in free-standing plant | 0,1 | 0,1 |
waste wood dimethylether (DME) in free-standing plant | 0 | 0 |
farmed wood dimethylether (DME) in free-standing plant | 0 | 0 |
waste wood methanol in free-standing plant | 0 | 0 |
farmed wood methanol in free-standing plant | 0 | 0 |
Fischer-Tropsch diesel from black-liquor gasification integrated with pulp mill | 0 | 0 |
Fischer-Tropsch petrol from black-liquor gasification integrated with pulp mill | 0 | 0 |
dimethylether (DME) from black-liquor gasification integrated with pulp mill | 0 | 0 |
methanol from black-liquor gasification integrated with pulp mill | 0 | 0 |
the part from renewable sources of MTBE | Equal to that of the methanol production pathway used |
Disaggregated default values for transport and distribution: ‘etd’ as defined in Part C of this Annex
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
wheat straw ethanol | 7,1 | 7,1 |
[X1waste wood Fischer-Tropsch diesel in free-standing plant | 12,2 | 12,2] |
farmed wood Fischer-Tropsch diesel in free-standing plant | 8,4 | 8,4 |
[X1waste wood Fischer-Tropsch petrol in free-standing plant | 12,2 | 12,2] |
farmed wood Fischer-Tropsch petrol in free-standing plant | 8,4 | 8,4 |
[X1waste wood dimethylether (DME) in free-standing plant | 12,1 | 12,1] |
farmed wood dimethylether (DME) in free-standing plant | 8,6 | 8,6 |
[X1waste wood methanol in free-standing plant | 12,1 | 12,1] |
farmed wood methanol in free-standing plant | 8,6 | 8,6 |
Fischer-Tropsch diesel from black-liquor gasification integrated with pulp mill | 7,7 | 7,7 |
Fischer-Tropsch petrol from black-liquor gasification integrated with pulp mill | 7,9 | 7,9 |
dimethylether (DME) from black-liquor gasification integrated with pulp mill | 7,7 | 7,7 |
methanol from black-liquor gasification integrated with pulp mill | 7,9 | 7,9 |
the part from renewable sources of MTBE | Equal to that of the methanol production pathway used |
Disaggregated default values for transport and distribution of final fuel only. These are already included in the table of ‘transport and distribution emissions etd’ as defined in Part C of this Annex, but the following values are useful if an economic operator wishes to declare actual transport emissions for feedstock transport only).
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
wheat straw ethanol | 1,6 | 1,6 |
waste wood Fischer-Tropsch diesel in free-standing plant | 1,2 | 1,2 |
farmed wood Fischer-Tropsch diesel in free-standing plant | 1,2 | 1,2 |
waste wood Fischer-Tropsch petrol in free-standing plant | 1,2 | 1,2 |
farmed wood Fischer-Tropsch petrol in free-standing plant | 1,2 | 1,2 |
waste wood dimethylether (DME) in free-standing plant | 2,0 | 2,0 |
farmed wood dimethylether (DME) in free-standing plant | 2,0 | 2,0 |
waste wood methanol in free-standing plant | 2,0 | 2,0 |
farmed wood methanol in free-standing plant | 2,0 | 2,0 |
Fischer-Tropsch diesel from black-liquor gasification integrated with pulp mill | 2,0 | 2,0 |
Fischer-Tropsch petrol from black-liquor gasification integrated with pulp mill | 2,0 | 2,0 |
dimethylether (DME) from black-liquor gasification integrated with pulp mill | 2,0 | 2,0 |
methanol from black-liquor gasification integrated with pulp mill | 2,0 | 2,0 |
the part from renewable sources of MTBE | Equal to that of the methanol production pathway used |
Total for cultivation, processing, transport and distribution
Biofuel and bioliquid production pathway | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|
wheat straw ethanol | 13,7 | 15,7 |
[X1waste wood Fischer-Tropsch diesel in free-standing plant | 15,6 | 15,6] |
farmed wood Fischer-Tropsch diesel in free-standing plant | 16,7 | 16,7 |
[X1waste wood Fischer-Tropsch petrol in free-standing plant | 15,6 | 15,6] |
farmed wood Fischer-Tropsch petrol in free-standing plant | 16,7 | 16,7 |
[X1waste wood dimethylether (DME) in free-standing plant | 15,2 | 15,2] |
farmed wood dimethylether (DME) in free-standing plant | 16,2 | 16,2 |
[X1waste wood methanol in free-standing plant | 15,2 | 15,2] |
farmed wood methanol in free-standing plant | 16,2 | 16,2 |
Fischer-Tropsch diesel from black-liquor gasification integrated with pulp mill | 10,2 | 10,2 |
Fischer-Tropsch petrol from black-liquor gasification integrated with pulp mill | 10,4 | 10,4 |
dimethylether (DME) from black-liquor gasification integrated with pulp mill | 10,2 | 10,2 |
methanol from black-liquor gasification integrated with pulp mill | 10,4 | 10,4 |
the part from renewable sources of MTBE | Equal to that of the methanol production pathway used |
WOODCHIPS | |||||
---|---|---|---|---|---|
Biomass fuel production system | Transport distance | Greenhouse gas emissions savings –typical value | Greenhouse gas emissions savings – default value | ||
Heat | Electricity | Heat | Electricity | ||
Woodchips from forest residues | 1 to 500 km | 93 % | 89 % | 91 % | 87 % |
500 to 2 500 km | 89 % | 84 % | 87 % | 81 % | |
2 500 to 10 000 km | 82 % | 73 % | 78 % | 67 % | |
Above 10 000 km | 67 % | 51 % | 60 % | 41 % | |
Woodchips from short rotation coppice (Eucalyptus) | 2 500 to 10 000 km | 77 % | 65 % | 73 % | 60 % |
Woodchips from short rotation coppice (Poplar – Fertilised) | 1 to 500 km | 89 % | 83 % | 87 % | 81 % |
500 to 2 500 km | 85 % | 78 % | 84 % | 76 % | |
2 500 to 10 000 km | 78 % | 67 % | 74 % | 62 % | |
Above 10 000 km | 63 % | 45 % | 57 % | 35 % | |
Woodchips from short rotation coppice (Poplar – No fertilisation) | 1 to 500 km | 91 % | 87 % | 90 % | 85 % |
500 to 2 500 km | 88 % | 82 % | 86 % | 79 % | |
2 500 to 10 000 km | 80 % | 70 % | 77 % | 65 % | |
Above 10 000 km | 65 % | 48 % | 59 % | 39 % | |
Woodchips from stemwood | 1 to 500 km | 93 % | 89 % | 92 % | 88 % |
500 to 2 500 km | 90 % | 85 % | 88 % | 82 % | |
2 500 to 10 000 km | 82 % | 73 % | 79 % | 68 % | |
Above 10 000 km | 67 % | 51 % | 61 % | 42 % | |
Woodchips from industry residues | 1 to 500 km | 94 % | 92 % | 93 % | 90 % |
500 to 2 500 km | 91 % | 87 % | 90 % | 85 % | |
2 500 to 10 000 km | 83 % | 75 % | 80 % | 71 % | |
Above 10 000 km | 69 % | 54 % | 63 % | 44 % |
a Case 1 refers to processes in which a natural gas boiler is used to provide the process heat to the pellet mill. Electricity for the pellet mill is supplied from the grid; Case 2a refers to processes in which a woodchips boiler, fed with pre-dried chips, is used to provide process heat. Electricity for the pellet mill is supplied from the grid; Case 3a refers to processes in which a CHP, fed with pre-dried woodchips, is used to provide electricity and heat to the pellet mill. | ||||||
WOOD PELLETSa | ||||||
---|---|---|---|---|---|---|
Biomass fuel production system | Transport distance | Greenhouse gas emissions savings – typical value | Greenhouse gas emissions savings – default value | |||
Heat | Electricity | Heat | Electricity | |||
Wood briquettes or pellets from forest residues | Case 1 | 1 to 500 km | 58 % | 37 % | 49 % | 24 % |
500 to 2 500 km | 58 % | 37 % | 49 % | 25 % | ||
2 500 to 10 000 km | 55 % | 34 % | 47 % | 21 % | ||
Above 10 000 km | 50 % | 26 % | 40 % | 11 % | ||
Case 2a | 1 to 500 km | 77 % | 66 % | 72 % | 59 % | |
500 to 2 500 km | 77 % | 66 % | 72 % | 59 % | ||
2 500 to 10 000 km | 75 % | 62 % | 70 % | 55 % | ||
Above 10 000 km | 69 % | 54 % | 63 % | 45 % | ||
Case 3a | 1 to 500 km | 92 % | 88 % | 90 % | 85 % | |
500 to 2 500 km | 92 % | 88 % | 90 % | 86 % | ||
2 500 to 10 000 km | 90 % | 85 % | 88 % | 81 % | ||
Above 10 000 km | 84 % | 76 % | 81 % | 72 % | ||
Wood briquettes or pellets from short rotation coppice (Eucalyptus) | Case 1 | 2 500 to 10 000 km | 52 % | 28 % | 43 % | 15 % |
Case 2a | 2 500 to 10 000 km | 70 % | 56 % | 66 % | 49 % | |
Case 3a | 2 500 to 10 000 km | 85 % | 78 % | 83 % | 75 % | |
Wood briquettes or pellets from short rotation coppice (Poplar – Fertilised) | Case 1 | 1 to 500 km | 54 % | 32 % | 46 % | 20 % |
500 to 10 000 km | 52 % | 29 % | 44 % | 16 % | ||
Above 10 000 km | 47 % | 21 % | 37 % | 7 % | ||
Case 2a | 1 to 500 km | 73 % | 60 % | 69 % | 54 % | |
500 to 10 000 km | 71 % | 57 % | 67 % | 50 % | ||
Above 10 000 km | 66 % | 49 % | 60 % | 41 % | ||
Case 3a | 1 to 500 km | 88 % | 82 % | 87 % | 81 % | |
500 to 10 000 km | 86 % | 79 % | 84 % | 77 % | ||
Above 10 000 km | 80 % | 71 % | 78 % | 67 % | ||
Wood briquettes or pellets from short rotation coppice (Poplar – No fertilisation) | Case 1 | 1 to 500 km | 56 % | 35 % | 48 % | 23 % |
500 to 10 000 km | 54 % | 32 % | 46 % | 20 % | ||
Above 10 000 km | 49 % | 24 % | 40 % | 10 % | ||
Case 2a | 1 to 500 km | 76 % | 64 % | 72 % | 58 % | |
500 to 10 000 km | 74 % | 61 % | 69 % | 54 % | ||
Above 10 000 km | 68 % | 53 % | 63 % | 45 % | ||
Case 3a | 1 to 500 km | 91 % | 86 % | 90 % | 85 % | |
500 to 10 000 km | 89 % | 83 % | 87 % | 81 % | ||
Above 10 000 km | 83 % | 75 % | 81 % | 71 % | ||
Stemwood | Case 1 | 1 to 500 km | 57 % | 37 % | 49 % | 24 % |
500 to 2 500 km | 58 % | 37 % | 49 % | 25 % | ||
2 500 to 10 000 km | 55 % | 34 % | 47 % | 21 % | ||
Above 10 000 km | 50 % | 26 % | 40 % | 11 % | ||
Case 2a | 1 to 500 km | 77 % | 66 % | 73 % | 60 % | |
500 to 2 500 km | 77 % | 66 % | 73 % | 60 % | ||
2 500 to 10 000 km | 75 % | 63 % | 70 % | 56 % | ||
Above 10 000 km | 70 % | 55 % | 64 % | 46 % | ||
Case 3a | 1 to 500 km | 92 % | 88 % | 91 % | 86 % | |
500 to 2 500 km | 92 % | 88 % | 91 % | 87 % | ||
2 500 to 10 000 km | 90 % | 85 % | 88 % | 83 % | ||
Above 10 000 km | 84 % | 77 % | 82 % | 73 % | ||
Wood briquettes or pellets from wood industry residues | Case 1 | 1 to 500 km | 75 % | 62 % | 69 % | 55 % |
500 to 2 500 km | 75 % | 62 % | 70 % | 55 % | ||
2 500 to 10 000 km | 72 % | 59 % | 67 % | 51 % | ||
Above 10 000 km | 67 % | 51 % | 61 % | 42 % | ||
Case 2a | 1 to 500 km | 87 % | 80 % | 84 % | 76 % | |
500 to 2 500 km | 87 % | 80 % | 84 % | 77 % | ||
2 500 to 10 000 km | 85 % | 77 % | 82 % | 73 % | ||
Above 10 000 km | 79 % | 69 % | 75 % | 63 % | ||
Case 3a | 1 to 500 km | 95 % | 93 % | 94 % | 91 % | |
500 to 2 500 km | 95 % | 93 % | 94 % | 92 % | ||
2 500 to 10 000 km | 93 % | 90 % | 92 % | 88 % | ||
Above 10 000 km | 88 % | 82 % | 85 % | 78 % |
a This group of materials includes agricultural residues with a low bulk density and it comprises materials such as straw bales, oat hulls, rice husks and sugar cane bagasse bales (not exhaustive list). | |||||
b The group of agricultural residues with higher bulk density includes materials such as corn cobs, nut shells, soybean hulls, palm kernel shells (not exhaustive list). | |||||
AGRICULTURE PATHWAYS | |||||
---|---|---|---|---|---|
Biomass fuel production system | Transport distance | Greenhouse gas emissions savings – typical value | Greenhouse gas emissions savings – default value | ||
Heat | Electricity | Heat | Electricity | ||
Agricultural Residues with density < 0,2 t/m3 a | 1 to 500 km | 95 % | 92 % | 93 % | 90 % |
500 to 2 500 km | 89 % | 83 % | 86 % | 80 % | |
2 500 to 10 000 km | 77 % | 66 % | 73 % | 60 % | |
Above 10 000 km | 57 % | 36 % | 48 % | 23 % | |
Agricultural Residues with density > 0,2 t/m3 b | 1 to 500 km | 95 % | 92 % | 93 % | 90 % |
500 to 2 500 km | 93 % | 89 % | 92 % | 87 % | |
2 500 to 10 000 km | 88 % | 82 % | 85 % | 78 % | |
Above 10 000 km | 78 % | 68 % | 74 % | 61 % | |
Straw pellets | 1 to 500 km | 88 % | 82 % | 85 % | 78 % |
500 to 10 000 km | 86 % | 79 % | 83 % | 74 % | |
Above 10 000 km | 80 % | 70 % | 76 % | 64 % | |
Bagasse briquettes | 500 to 10 000 km | 93 % | 89 % | 91 % | 87 % |
Above 10 000 km | 87 % | 81 % | 85 % | 77 % | |
Palm Kernel Meal | Above 10 000 km | 20 % | -18 % | 11 % | -33 % |
Palm Kernel Meal (no CH4 emissions from oil mill) | Above 10 000 km | 46 % | 20 % | 42 % | 14 % |
a Case 1 refers to pathways in which electricity and heat required in the process are supplied by the CHP engine itself. Case 2 refers to pathways in which the electricity required in the process is taken from the grid and the process heat is supplied by the CHP engine itself. In some Member States, operators are not allowed to claim the gross production for subsidies and case 1 is the more likely configuration. Case 3 refers to pathways in which the electricity required in the process is taken from the grid and the process heat is supplied by a biogas boiler. This case applies to some installations in which the CHP engine is not on-site and biogas is sold (but not upgraded to biomethane). | ||||
b The values for biogas production from manure include negative emissions for emissions saved from raw manure management. The value of esca considered is equal to – 45 g CO2eq/MJ manure used in anaerobic digestion. | ||||
c Open storage of digestate accounts for additional emissions of CH4 and N2O. The magnitude of those emissions changes with ambient conditions, substrate types and the digestion efficiency. | ||||
d Close storage means that the digestate resulting from the digestion process is stored in a gas-tight tank and that the additional biogas released during storage is considered to be recovered for production of additional electricity or biomethane. No greenhouse gas emissions are included in that process. | ||||
e Maize whole plant means maize harvested as fodder and ensiled for preservation. | ||||
BIOGAS FOR ELECTRICITYa | ||||
---|---|---|---|---|
Biogas production system | Technological option | Greenhouse gas emissions savings – typical value | Greenhouse gas emissions savings – default value | |
Wet manureb | Case 1 | Open digestatec | 146 % | 94 % |
Close digestated | 246 % | 240 % | ||
Case 2 | Open digestate | 136 % | 85 % | |
Close digestate | 227 % | 219 % | ||
Case 3 | Open digestate | 142 % | 86 % | |
Close digestate | 243 % | 235 % | ||
Maize whole plante | Case 1 | Open digestate | 36 % | 21 % |
Close digestate | 59 % | 53 % | ||
Case 2 | Open digestate | 34 % | 18 % | |
Close digestate | 55 % | 47 % | ||
Case 3 | Open digestate | 28 % | 10 % | |
Close digestate | 52 % | 43 % | ||
Biowaste | Case 1 | Open digestate | 47 % | 26 % |
Close digestate | 84 % | 78 % | ||
Case 2 | Open digestate | 43 % | 21 % | |
Close digestate | 77 % | 68 % | ||
Case 3 | Open digestate | 38 % | 14 % | |
Close digestate | 76 % | 66 % |
BIOGAS FOR ELECTRICITY – MIXTURES OF MANURE AND MAIZE | ||||
---|---|---|---|---|
Biogas production system | Technological option | Greenhouse gas emissions savings – typical value | Greenhouse gas emissions savings – default value | |
Manure – Maize 80 % - 20 % | Case 1 | Open digestate | 72 % | 45 % |
Close digestate | 120 % | 114 % | ||
Case 2 | Open digestate | 67 % | 40 % | |
Close digestate | 111 % | 103 % | ||
Case 3 | Open digestate | 65 % | 35 % | |
Close digestate | 114 % | 106 % | ||
Manure – Maize 70 % - 30 % | Case 1 | Open digestate | 60 % | 37 % |
Close digestate | 100 % | 94 % | ||
Case 2 | Open digestate | 57 % | 32 % | |
Close digestate | 93 % | 85 % | ||
Case 3 | Open digestate | 53 % | 27 % | |
Close digestate | 94 % | 85 % | ||
Manure – Maize 60 % - 40 % | Case 1 | Open digestate | 53 % | 32 % |
Close digestate | 88 % | 82 % | ||
Case 2 | Open digestate | 50 % | 28 % | |
Close digestate | 82 % | 73 % | ||
Case 3 | Open digestate | 46 % | 22 % | |
Close digestate | 81 % | 72 % |
a The greenhouse gas emissions savings for biomethane only refer to compressed biomethane relative to the fossil fuel comparator for transport of 94 g CO2eq/MJ. | |||
BIOMETHANE FOR TRANSPORTa | |||
---|---|---|---|
Biomethane production system | Technological options | Greenhouse gas emissions savings – typical value | Greenhouse gas emissions savings – default value |
Wet manure | Open digestate, no off-gas combustion | 117 % | 72 % |
Open digestate, off-gas combustion | 133 % | 94 % | |
Close digestate, no off-gas combustion | 190 % | 179 % | |
Close digestate, off-gas combustion | 206 % | 202 % | |
Maize whole plant | Open digestate, no off-gas combustion | 35 % | 17 % |
Open digestate, off-gas combustion | 51 % | 39 % | |
Close digestate, no off-gas combustion | 52 % | 41 % | |
Close digestate, off-gas combustion | 68 % | 63 % | |
Biowaste | Open digestate, no off-gas combustion | 43 % | 20 % |
Open digestate, off-gas combustion | 59 % | 42 % | |
Close digestate, no off-gas combustion | 70 % | 58 % | |
Close digestate, off-gas combustion | 86 % | 80 % |
a The greenhouse gas emissions savings for biomethane only refer to compressed biomethane relative to the fossil fuel comparator for transport of 94 g CO2eq/MJ. | |||
b This category includes the following categories of technologies for biogas upgrade to biomethane: Pressure Swing Adsorption (PSA), Pressure Water Scrubbing (PWS), Membranes, Cryogenic, and Organic Physical Scrubbing (OPS). It includes an emission of 0,03 MJ CH4/MJ biomethane for the emission of methane in the off-gases. | |||
c This category includes the following categories of technologies for biogas upgrade to biomethane: Pressure Water Scrubbing (PWS) when water is recycled, Pressure Swing Adsorption (PSA), Chemical Scrubbing, Organic Physical Scrubbing (OPS), Membranes and Cryogenic upgrading. No methane emissions are considered for this category (the methane in the off-gas is combusted, if any). | |||
BIOMETHANE – MIXTURES OF MANURE AND MAIZEa | |||
---|---|---|---|
Biomethane production system | Technological options | Greenhouse gas emissions savings – typical value | Greenhouse gas emissions savings – default value |
Manure – Maize 80 % - 20 % | Open digestate, no off-gas combustionb | 62 % | 35 % |
Open digestate, off-gas combustionc | 78 % | 57 % | |
Close digestate, no off-gas combustion | 97 % | 86 % | |
Close digestate, off-gas combustion | 113 % | 108 % | |
Manure – Maize 70 % - 30 % | Open digestate, no off-gas combustion | 53 % | 29 % |
Open digestate, off-gas combustion | 69 % | 51 % | |
Close digestate, no off-gas combustion | 83 % | 71 % | |
Close digestate, off-gas combustion | 99 % | 94 % | |
Manure – Maize 60 % - 40 % | Open digestate, no off-gas combustion | 48 % | 25 % |
Open digestate, off-gas combustion | 64 % | 48 % | |
Close digestate, no off-gas combustion | 74 % | 62 % | |
Close digestate, off-gas combustion | 90 % | 84 % |
Greenhouse gas emissions from the production and use of biomass fuels before conversion into electricity, heating and cooling, shall be calculated as:
E = eec + el + ep + etd + eu – esca – eccs – eccr,
Where
=
total emissions from the production of the fuel before energy conversion;
=
emissions from the extraction or cultivation of raw materials;
=
annualised emissions from carbon stock changes caused by land-use change;
=
emissions from processing;
=
emissions from transport and distribution;
=
emissions from the fuel in use;
=
emission savings from soil carbon accumulation via improved agricultural management;
=
emission savings from CO2 capture and geological storage; and
=
emission savings from CO2 capture and replacement.
Emissions from the manufacture of machinery and equipment shall not be taken into account.
In the case of co-digestion of different substrates in a biogas plant for the production of biogas or biomethane, the typical and default values of greenhouse gas emissions shall be calculated as:
[X1 ]
where
=
greenhouse gas emissions per MJ biogas or biomethane produced from co-digestion of the defined mixture of substrates
=
Share of feedstock n in energy content
=
Emission in g CO2/MJ for pathway n as provided in Part D of this Annex (*)
[X1 ]
where
=
energy yield [MJ] per kilogram of wet input of feedstock n (**)
=
weighting factor of substrate n defined as:
where:
=
Annual input to digester of substrate n [tonne of fresh matter]
=
Average annual moisture of substrate n [kg water/kg fresh matter]
=
Standard moisture for substrate n (***).
P(Maize): 4,16 [MJbiogas/kg wet maize @ 65 % moisture]
P(Manure): 0,50 [MJbiogas/kg wet manure @ 90 % moisture]
P(Biowaste) 3,41 [MJbiogas/kg wet biowaste @ 76 % moisture]
SM(Maize): 0,65 [kg water/kg fresh matter]
SM(Manure): 0,90 [kg water/kg fresh matter]
SM(Biowaste): 0,76 [kg water/kg fresh matter]
In the case of co-digestion of n substrates in a biogas plant for the production of electricity or biomethane, actual greenhouse gas emissions of biogas and biomethane are calculated as follows:
where
=
total emissions from the production of the biogas or biomethane before energy conversion;
=
Share of feedstock n, in fraction of input to the digester;
=
emissions from the extraction or cultivation of feedstock n;
=
emissions from transport of feedstock n to the digester;
=
annualised emissions from carbon stock changes caused by land-use change, for feedstock n;
=
emission savings from improved agricultural management of feedstock n (*);
=
emissions from processing;
=
emissions from transport and distribution of biogas and/or biomethane;
=
emissions from the fuel in use, that is greenhouse gases emitted during combustion;
=
emission savings from CO2 capture and geological storage; and
=
emission savings from CO2 capture and replacement.
Greenhouse gas emissions from the use of biomass fuels in producing electricity, heating and cooling, including the energy conversion to electricity and/or heat or cooling produced, shall be calculated as follows:
For energy installations delivering only electricity:
where
=
Total greenhouse gas emissions from the final energy commodity.
=
Total greenhouse gas emissions of the fuel before end-conversion.
=
The electrical efficiency, defined as the annual electricity produced divided by the annual fuel input, based on its energy content.
=
The heat efficiency, defined as the annual useful heat output divided by the annual fuel input, based on its energy content.
For the electricity or mechanical energy coming from energy installations delivering useful heat together with electricity and/or mechanical energy:
For the useful heat coming from energy installations delivering heat together with electricity and/or mechanical energy:
where:
=
Total greenhouse gas emissions from the final energy commodity.
=
Total greenhouse gas emissions of the fuel before end-conversion.
=
The electrical efficiency, defined as the annual electricity produced divided by the annual energy input, based on its energy content.
=
The heat efficiency, defined as the annual useful heat output divided by the annual energy input, based on its energy content.
=
Fraction of exergy in the electricity, and/or mechanical energy, set to 100 % (Cel = 1).
=
Carnot efficiency (fraction of exergy in the useful heat).
The Carnot efficiency, Ch, for useful heat at different temperatures is defined as:
where:
=
Temperature, measured in absolute temperature (kelvin) of the useful heat at point of delivery.
=
Temperature of surroundings, set at 273,15 kelvin (equal to 0 °C).
If the excess heat is exported for heating of buildings, at a temperature below 150 °C (423,15 kelvin), Ch can alternatively be defined as follows:
=
Carnot efficiency in heat at 150 °C (423,15 kelvin), which is: 0,3546
For the purposes of that calculation, the following definitions apply:
‘cogeneration’ shall mean the simultaneous generation in one process of thermal energy and electricity and/or mechanical energy;
‘useful heat’ shall mean heat generated to satisfy an economical justifiable demand for heat, for heating or cooling purposes;
‘economically justifiable demand’ shall mean the demand that does not exceed the needs for heat or cooling and which would otherwise be satisfied at market conditions.
greenhouse gas emissions from biomass fuels, E, shall be expressed in terms of grams of CO2 equivalent per MJ of biomass fuel, g CO2eq/MJ;
greenhouse gas emissions from heating or electricity, produced from biomass fuels, EC, shall be expressed in terms of grams of CO2 equivalent per MJ of final energy commodity (heat or electricity), g CO2eq/MJ.
When heating and cooling are co-generated with electricity, emissions shall be allocated between heat and electricity (as under point 1(d)), irrespective if the heat is used for actual heating purposes or for cooling.(9)
Where the greenhouse gas emissions from the extraction or cultivation of raw materials eec are expressed in unit g CO2eq/dry-ton of feedstock, the conversion to grams of CO2 equivalent per MJ of fuel, g CO2eq /MJ, shall be calculated as follows(10):
Where
Emissions per dry-ton feedstock shall be calculated as follows:
greenhouse gas emissions savings from biomass fuels used as transport fuels:
SAVING = (EF(t) – EB)/EF(t)
where
=
total emissions from biomass fuels used as transport fuels; and
=
total emissions from the fossil fuel comparator for transport
greenhouse gas emissions savings from heat and cooling, and electricity being generated from biomass fuels:
SAVING = (ECF(h&c,el) – ECB(h&c,el))/ECF (h&c,el),
where
=
total emissions from the heat or electricity,
=
total emissions from the fossil fuel comparator for useful heat or electricity.
CO2: 1
N2O: 298
CH4: 25
Estimates of emissions from cultivation and harvesting of forestry biomass may be derived from the use of averages for cultivation and harvesting emissions calculated for geographical areas at national level, as an alternative to using actual values.
el = (CSR – CSA) × 3,664 × 1/20 × 1/P – eB,(12)
where
=
annualised greenhouse gas emissions from carbon stock change due to land-use change (measured as mass of CO2-equivalent per unit biomass fuel energy). ‘Cropland’(13) and ‘perennial cropland’(14) shall be regarded as one land use;
=
the carbon stock per unit area associated with the reference land use (measured as mass (tonnes) of carbon per unit area, including both soil and vegetation). The reference land use shall be the land use in January 2008 or 20 years before the raw material was obtained, whichever was the later;
=
the carbon stock per unit area associated with the actual land use (measured as mass (tonnes) of carbon per unit area, including both soil and vegetation). In cases where the carbon stock accumulates over more than one year, the value attributed to CSA shall be the estimated stock per unit area after 20 years or when the crop reaches maturity, whichever the earlier;
=
the productivity of the crop (measured as biomass fuel energy per unit area per year); and
=
bonus of 29 g CO2eq/MJ biomass fuel if biomass is obtained from restored degraded land under the conditions laid down in point 8.
was not in use for agriculture in January 2008 or any other activity; and
is severely degraded land, including such land that was formerly in agricultural use.
The bonus of 29 g CO2eq/MJ shall apply for a period of up to 20 years from the date of conversion of the land to agricultural use, provided that a steady increase in carbon stocks as well as a sizable reduction in erosion phenomena for land falling under (b) are ensured.
In accounting for the consumption of electricity not produced within the solid or gaseous biomass fuel production plant, the greenhouse gas emissions intensity of the production and distribution of that electricity shall be assumed to be equal to the average emission intensity of the production and distribution of electricity in a defined region. By way of derogation from this rule, producers may use an average value for an individual electricity production plant for electricity produced by that plant, if that plant is not connected to the electricity grid.
Emissions from processing shall include emissions from drying of interim products and materials where relevant.
where
=
Temperature, measured in absolute temperature (kelvin) of the useful heat at point of delivery.
=
Temperature of surroundings, set at 273,15 kelvin (equal to 0 °C).
If the excess heat is exported for heating of buildings, at a temperature below 150 °C (423,15 kelvin), Ch can alternatively be defined as follows:
=
Carnot efficiency in heat at 150 °C (423,15 kelvin), which is: 0,3546
For the purposes of that calculation, the actual efficiencies shall be used, defined as the annual mechanical energy, electricity and heat produced respectively divided by the annual energy input.
For the purposes of that calculation, the following definitions apply:
‘cogeneration’ shall mean the simultaneous generation in one process of thermal energy and electrical and/or mechanical energy;
‘useful heat’ shall mean heat generated to satisfy an economical justifiable demand for heat, for heating or cooling purposes;
‘economically justifiable demand’ shall mean the demand that does not exceed the needs for heat or cooling and which would otherwise be satisfied at market conditions.
[X1In the case of biogas and biomethane, all co-products shall be taken into account for the purposes of that calculation.] No emissions shall be allocated to wastes and residues. Co-products that have a negative energy content shall be considered to have an energy content of zero for the purposes of the calculation.
Wastes and residues, including tree tops and branches, straw, husks, cobs and nut shells, and residues from processing, including crude glycerine (glycerine that is not refined) and bagasse, shall be considered to have zero life-cycle greenhouse gas emissions up to the process of collection of those materials irrespectively of whether they are processed to interim products before being transformed into the final product.
In the case of biomass fuels produced in refineries, other than the combination of processing plants with boilers or cogeneration units providing heat and/or electricity to the processing plant, the unit of analysis for the purposes of the calculation referred to in point 17 shall be the refinery.
For biomass fuels used for the production of useful heat, as well as for the production of heating and/or cooling, for the purposes of the calculation referred to in point 3, the fossil fuel comparator ECF(h) shall be 80 g CO2eq/MJ heat.
For biomass fuels used for the production of useful heat, in which a direct physical substitution of coal can be demonstrated, for the purposes of the calculation referred to in point 3, the fossil fuel comparator ECF(h) shall be 124 g CO2eq/MJ heat.
For biomass fuels used as transport fuels, for the purposes of the calculation referred to in point 3, the fossil fuel comparator EF(t) shall be 94 g CO2eq/MJ.
Biomass fuel production system | Transport distance | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) | ||||||
---|---|---|---|---|---|---|---|---|---|
Cultivation | Processing | Transport | Non-CO2 emissions from the fuel in use | Cultivation | Processing | Transport | Non-CO2 emissions from the fuel in use | ||
Wood chips from forest residues | 1 to 500 km | 0,0 | 1,6 | 3,0 | 0,4 | 0,0 | 1,9 | 3,6 | 0,5 |
500 to 2 500 km | 0,0 | 1,6 | 5,2 | 0,4 | 0,0 | 1,9 | 6,2 | 0,5 | |
2 500 to 10 000 km | 0,0 | 1,6 | 10,5 | 0,4 | 0,0 | 1,9 | 12,6 | 0,5 | |
Above 10 000 km | 0,0 | 1,6 | 20,5 | 0,4 | 0,0 | 1,9 | 24,6 | 0,5 | |
Wood chips from SRC (Eucalyptus) | 2 500 to 10 000 km | 4,4 | 0,0 | 11,0 | 0,4 | 4,4 | 0,0 | 13,2 | 0,5 |
Wood chips from SRC (Poplar – fertilised) | 1 to 500 km | 3,9 | 0,0 | 3,5 | 0,4 | 3,9 | 0,0 | 4,2 | 0,5 |
500 to 2 500 km | 3,9 | 0,0 | 5,6 | 0,4 | 3,9 | 0,0 | 6,8 | 0,5 | |
2 500 to 10 000 km | 3,9 | 0,0 | 11,0 | 0,4 | 3,9 | 0,0 | 13,2 | 0,5 | |
Above 10 000 km | 3,9 | 0,0 | 21,0 | 0,4 | 3,9 | 0,0 | 25,2 | 0,5 | |
Wood chips from SRC (Poplar – Not fertilised) | 1 to 500 km | 2,2 | 0,0 | 3,5 | 0,4 | 2,2 | 0,0 | 4,2 | 0,5 |
500 to 2 500 km | 2,2 | 0,0 | 5,6 | 0,4 | 2,2 | 0,0 | 6,8 | 0,5 | |
2 500 to 10 000 km | 2,2 | 0,0 | 11,0 | 0,4 | 2,2 | 0,0 | 13,2 | 0,5 | |
Above 10 000 km | 2,2 | 0,0 | 21,0 | 0,4 | 2,2 | 0,0 | 25,2 | 0,5 | |
Wood chips from stemwood | 1 to 500 km | 1,1 | 0,3 | 3,0 | 0,4 | 1,1 | 0,4 | 3,6 | 0,5 |
500 to 2 500 km | 1,1 | 0,3 | 5,2 | 0,4 | 1,1 | 0,4 | 6,2 | 0,5 | |
2 500 to 10 000 km | 1,1 | 0,3 | 10,5 | 0,4 | 1,1 | 0,4 | 12,6 | 0,5 | |
Above 10 000 km | 1,1 | 0,3 | 20,5 | 0,4 | 1,1 | 0,4 | 24,6 | 0,5 | |
Wood chips from wood industry residues | 1 to 500 km | 0,0 | 0,3 | 3,0 | 0,4 | 0,0 | 0,4 | 3,6 | 0,5 |
500 to 2 500 km | 0,0 | 0,3 | 5,2 | 0,4 | 0,0 | 0,4 | 6,2 | 0,5 | |
2 500 to 10 000 km | 0,0 | 0,3 | 10,5 | 0,4 | 0,0 | 0,4 | 12,6 | 0,5 | |
Above 10 000 km | 0,0 | 0,3 | 20,5 | 0,4 | 0,0 | 0,4 | 24,6 | 0,5 |
Biomass fuel production system | Transport distance | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) | ||||||
---|---|---|---|---|---|---|---|---|---|
Cultivation | Processing | Transport & distribution | Non-CO2 emissions from the fuel in use | Cultivation | Processing | Transport & distribution | Non-CO2 emissions from the fuel in use | ||
Wood briquettes or pellets from forest residues (case 1) | 1 to 500 km | 0,0 | 25,8 | 2,9 | 0,3 | 0,0 | 30,9 | 3,5 | 0,3 |
500 to 2 500 km | 0,0 | 25,8 | 2,8 | 0,3 | 0,0 | 30,9 | 3,3 | 0,3 | |
2 500 to 10 000 km | 0,0 | 25,8 | 4,3 | 0,3 | 0,0 | 30,9 | 5,2 | 0,3 | |
Above 10 000 km | 0,0 | 25,8 | 7,9 | 0,3 | 0,0 | 30,9 | 9,5 | 0,3 | |
Wood briquettes or pellets from forest residues (case 2a) | 1 to 500 km | 0,0 | 12,5 | 3,0 | 0,3 | 0,0 | 15,0 | 3,6 | 0,3 |
500 to 2 500 km | 0,0 | 12,5 | 2,9 | 0,3 | 0,0 | 15,0 | 3,5 | 0,3 | |
2 500 to 10 000 km | 0,0 | 12,5 | 4,4 | 0,3 | 0,0 | 15,0 | 5,3 | 0,3 | |
Above 10 000 km | 0,0 | 12,5 | 8,1 | 0,3 | 0,0 | 15,0 | 9,8 | 0,3 | |
Wood briquettes or pellets from forest residues (case 3a) | 1 to 500 km | 0,0 | 2,4 | 3,0 | 0,3 | 0,0 | 2,8 | 3,6 | 0,3 |
500 to 2 500 km | 0,0 | 2,4 | 2,9 | 0,3 | 0,0 | 2,8 | 3,5 | 0,3 | |
2 500 to 10 000 km | 0,0 | 2,4 | 4,4 | 0,3 | 0,0 | 2,8 | 5,3 | 0,3 | |
Above 10 000 km | 0,0 | 2,4 | 8,2 | 0,3 | 0,0 | 2,8 | 9,8 | 0,3 | |
Wood briquettes from short rotation coppice (Eucalyptus – case 1) | 2 500 to 10 000 km | 3,9 | 24,5 | 4,3 | 0,3 | 3,9 | 29,4 | 5,2 | 0,3 |
Wood briquettes from short rotation coppice (Eucalyptus – case 2a) | 2 500 to 10 000 km | 5,0 | 10,6 | 4,4 | 0,3 | 5,0 | 12,7 | 5,3 | 0,3 |
Wood briquettes from short rotation coppice (Eucalyptus – case 3a) | 2 500 to 10 000 km | 5,3 | 0,3 | 4,4 | 0,3 | 5,3 | 0,4 | 5,3 | 0,3 |
Wood briquettes from short rotation coppice (Poplar – Fertilised – case 1) | 1 to 500 km | 3,4 | 24,5 | 2,9 | 0,3 | 3,4 | 29,4 | 3,5 | 0,3 |
500 to 10 000 km | 3,4 | 24,5 | 4,3 | 0,3 | 3,4 | 29,4 | 5,2 | 0,3 | |
Above 10 000 km | 3,4 | 24,5 | 7,9 | 0,3 | 3,4 | 29,4 | 9,5 | 0,3 | |
Wood briquettes from short rotation coppice (Poplar – Fertilised – case 2a) | 1 to 500 km | 4,4 | 10,6 | 3,0 | 0,3 | 4,4 | 12,7 | 3,6 | 0,3 |
500 to 10 000 km | 4,4 | 10,6 | 4,4 | 0,3 | 4,4 | 12,7 | 5,3 | 0,3 | |
Above 10 000 km | 4,4 | 10,6 | 8,1 | 0,3 | 4,4 | 12,7 | 9,8 | 0,3 | |
Wood briquettes from short rotation coppice (Poplar – Fertilised – case 3a) | 1 to 500 km | 4,6 | 0,3 | 3,0 | 0,3 | 4,6 | 0,4 | 3,6 | 0,3 |
500 to 10 000 km | 4,6 | 0,3 | 4,4 | 0,3 | 4,6 | 0,4 | 5,3 | 0,3 | |
Above 10 000 km | 4,6 | 0,3 | 8,2 | 0,3 | 4,6 | 0,4 | 9,8 | 0,3 | |
Wood briquettes from short rotation coppice (Poplar – no fertilisation – case 1) | 1 to 500 km | 2,0 | 24,5 | 2,9 | 0,3 | 2,0 | 29,4 | 3,5 | 0,3 |
500 to 2 500 km | 2,0 | 24,5 | 4,3 | 0,3 | 2,0 | 29,4 | 5,2 | 0,3 | |
2 500 to 10 000 km | 2,0 | 24,5 | 7,9 | 0,3 | 2,0 | 29,4 | 9,5 | 0,3 | |
Wood briquettes from short rotation coppice (Poplar – no fertilisation – case 2a) | 1 to 500 km | 2,5 | 10,6 | 3,0 | 0,3 | 2,5 | 12,7 | 3,6 | 0,3 |
500 to 10 000 km | 2,5 | 10,6 | 4,4 | 0,3 | 2,5 | 12,7 | 5,3 | 0,3 | |
Above 10 000 km | 2,5 | 10,6 | 8,1 | 0,3 | 2,5 | 12,7 | 9,8 | 0,3 | |
Wood briquettes from short rotation coppice (Poplar – no fertilisation– case 3a) | 1 to 500 km | 2,6 | 0,3 | 3,0 | 0,3 | 2,6 | 0,4 | 3,6 | 0,3 |
500 to 10 000 km | 2,6 | 0,3 | 4,4 | 0,3 | 2,6 | 0,4 | 5,3 | 0,3 | |
Above 10 000 km | 2,6 | 0,3 | 8,2 | 0,3 | 2,6 | 0,4 | 9,8 | 0,3 | |
Wood briquettes or pellets from stemwood (case 1) | 1 to 500 km | 1,1 | 24,8 | 2,9 | 0,3 | 1,1 | 29,8 | 3,5 | 0,3 |
500 to 2 500 km | 1,1 | 24,8 | 2,8 | 0,3 | 1,1 | 29,8 | 3,3 | 0,3 | |
2 500 to 10 000 km | 1,1 | 24,8 | 4,3 | 0,3 | 1,1 | 29,8 | 5,2 | 0,3 | |
Above 10 000 km | 1,1 | 24,8 | 7,9 | 0,3 | 1,1 | 29,8 | 9,5 | 0,3 | |
Wood briquettes or pellets from stemwood (case 2a) | 1 to 500 km | 1,4 | 11,0 | 3,0 | 0,3 | 1,4 | 13,2 | 3,6 | 0,3 |
500 to 2 500 km | 1,4 | 11,0 | 2,9 | 0,3 | 1,4 | 13,2 | 3,5 | 0,3 | |
2 500 to 10 000 km | 1,4 | 11,0 | 4,4 | 0,3 | 1,4 | 13,2 | 5,3 | 0,3 | |
Above 10 000 km | 1,4 | 11,0 | 8,1 | 0,3 | 1,4 | 13,2 | 9,8 | 0,3 | |
Wood briquettes or pellets from stemwood (case 3a) | 1 to 500 km | 1,4 | 0,8 | 3,0 | 0,3 | 1,4 | 0,9 | 3,6 | 0,3 |
500 to 2 500 km | 1,4 | 0,8 | 2,9 | 0,3 | 1,4 | 0,9 | 3,5 | 0,3 | |
2 500 to 10 000 km | 1,4 | 0,8 | 4,4 | 0,3 | 1,4 | 0,9 | 5,3 | 0,3 | |
Above 10 000 km | 1,4 | 0,8 | 8,2 | 0,3 | 1,4 | 0,9 | 9,8 | 0,3 | |
Wood briquettes or pellets from wood industry residues (case 1) | 1 to 500 km | 0,0 | 14,3 | 2,8 | 0,3 | 0,0 | 17,2 | 3,3 | 0,3 |
500 to 2 500 km | 0,0 | 14,3 | 2,7 | 0,3 | 0,0 | 17,2 | 3,2 | 0,3 | |
2 500 to 10 000 km | 0,0 | 14,3 | 4,2 | 0,3 | 0,0 | 17,2 | 5,0 | 0,3 | |
Above 10 000 km | 0,0 | 14,3 | 7,7 | 0,3 | 0,0 | 17,2 | 9,2 | 0,3 | |
Wood briquettes or pellets from wood industry residues (case 2a) | 1 to 500 km | 0,0 | 6,0 | 2,8 | 0,3 | 0,0 | 7,2 | 3,4 | 0,3 |
500 to 2 500 km | 0,0 | 6,0 | 2,7 | 0,3 | 0,0 | 7,2 | 3,3 | 0,3 | |
2 500 to 10 000 km | 0,0 | 6,0 | 4,2 | 0,3 | 0,0 | 7,2 | 5,1 | 0,3 | |
Above 10 000 km | 0,0 | 6,0 | 7,8 | 0,3 | 0,0 | 7,2 | 9,3 | 0,3 | |
Wood briquettes or pellets from wood industry residues (case 3a) | 1 to 500 km | 0,0 | 0,2 | 2,8 | 0,3 | 0,0 | 0,3 | 3,4 | 0,3 |
500 to 2 500 km | 0,0 | 0,2 | 2,7 | 0,3 | 0,0 | 0,3 | 3,3 | 0,3 | |
2 500 to 10 000 km | 0,0 | 0,2 | 4,2 | 0,3 | 0,0 | 0,3 | 5,1 | 0,3 | |
Above 10 000 km | 0,0 | 0,2 | 7,8 | 0,3 | 0,0 | 0,3 | 9,3 | 0,3 |
Biomass fuel production system | Transport distance | Greenhouse gas emissions – typical value (g CO2eq/MJ) | Greenhouse gas emissions – default value (g CO2eq/MJ) | ||||||
---|---|---|---|---|---|---|---|---|---|
Cultivation | Processing | Transport & distribution | Non-CO2 emissions from the fuel in use | Cultivation | Processing | Transport & distribution | Non-CO2 emissions from the fuel in use | ||
Agricultural Residues with density < 0,2 t/m3 | 1 to 500 km | 0,0 | 0,9 | 2,6 | 0,2 | 0,0 | 1,1 | 3,1 | 0,3 |
500 to 2 500 km | 0,0 | 0,9 | 6,5 | 0,2 | 0,0 | 1,1 | 7,8 | 0,3 | |
2 500 to 10 000 km | 0,0 | 0,9 | 14,2 | 0,2 | 0,0 | 1,1 | 17,0 | 0,3 | |
Above 10 000 km | 0,0 | 0,9 | 28,3 | 0,2 | 0,0 | 1,1 | 34,0 | 0,3 | |
Agricultural Residues with density > 0,2 t/m3 | 1 to 500 km | 0,0 | 0,9 | 2,6 | 0,2 | 0,0 | 1,1 | 3,1 | 0,3 |
500 to 2 500 km | 0,0 | 0,9 | 3,6 | 0,2 | 0,0 | 1,1 | 4,4 | 0,3 | |
2 500 to 10 000 km | 0,0 | 0,9 | 7,1 | 0,2 | 0,0 | 1,1 | 8,5 | 0,3 | |
Above 10 000 km | 0,0 | 0,9 | 13,6 | 0,2 | 0,0 | 1,1 | 16,3 | 0,3 | |
Straw pellets | 1 to 500 km | 0,0 | 5,0 | 3,0 | 0,2 | 0,0 | 6,0 | 3,6 | 0,3 |
500 to 10 000 km | 0,0 | 5,0 | 4,6 | 0,2 | 0,0 | 6,0 | 5,5 | 0,3 | |
Above 10 000 km | 0,0 | 5,0 | 8,3 | 0,2 | 0,0 | 6,0 | 10,0 | 0,3 | |
Bagasse briquettes | 500 to 10 000 km | 0,0 | 0,3 | 4,3 | 0,4 | 0,0 | 0,4 | 5,2 | 0,5 |
Above 10 000 km | 0,0 | 0,3 | 8,0 | 0,4 | 0,0 | 0,4 | 9,5 | 0,5 | |
Palm Kernel Meal | Above 10 000 km | 21,6 | 21,1 | 11,2 | 0,2 | 21,6 | 25,4 | 13,5 | 0,3 |
Palm Kernel Meal (no CH4 emissions from oil mill) | Above 10 000 km | 21,6 | 3,5 | 11,2 | 0,2 | 21,6 | 4,2 | 13,5 | 0,3 |
a The values for biogas production from manure include negative emissions for emissions saved from raw manure management. The value of esca considered is equal to – 45 g CO2eq/MJ manure used in anaerobic digestion. | ||||||||||||
b Maize whole plant means maize harvested as fodder and ensiled for preservation. | ||||||||||||
c Transport of agricultural raw materials to the transformation plant is, according to the methodology provided in the Commission's report of 25 February 2010 on sustainability requirements for the use of solid and gaseous biomass sources in electricity, heating and cooling, included in the ‘cultivation’ value. The value for transport of maize silage accounts for 0,4 g CO2eq/MJ biogas. | ||||||||||||
Biomass fuel production system | Technology | TYPICAL VALUE [g CO2eq/MJ] | DEFAULT VALUE [g CO2eq/MJ] | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Cultivation | Processing | Non-CO2 emissions from the fuel in use | Transport | Manure credits | Cultivation | Processing | Non-CO2 emissions from the fuel in use | Transport | Manure credits | |||
Wet manurea | case 1 | Open digestate | 0,0 | 69,6 | 8,9 | 0,8 | – 107,3 | 0,0 | 97,4 | 12,5 | 0,8 | – 107,3 |
Close digestate | 0,0 | 0,0 | 8,9 | 0,8 | – 97,6 | 0,0 | 0,0 | 12,5 | 0,8 | – 97,6 | ||
case 2 | Open digestate | 0,0 | 74,1 | 8,9 | 0,8 | – 107,3 | 0,0 | 103,7 | 12,5 | 0,8 | – 107,3 | |
Close digestate | 0,0 | 4,2 | 8,9 | 0,8 | – 97,6 | 0,0 | 5,9 | 12,5 | 0,8 | – 97,6 | ||
case 3 | Open digestate | 0,0 | 83,2 | 8,9 | 0,9 | – 120,7 | 0,0 | 116,4 | 12,5 | 0,9 | – 120,7 | |
Close digestate | 0,0 | 4,6 | 8,9 | 0,8 | – 108,5 | 0,0 | 6,4 | 12,5 | 0,8 | – 108,5 | ||
Maize whole plantb | case 1 | Open digestate | 15,6 | 13,5 | 8,9 | 0,0c | — | 15,6 | 18,9 | 12,5 | 0,0 | — |
Close digestate | 15,2 | 0,0 | 8,9 | 0,0 | — | 15,2 | 0,0 | 12,5 | 0,0 | — | ||
case 2 | Open digestate | 15,6 | 18,8 | 8,9 | 0,0 | — | 15,6 | 26,3 | 12,5 | 0,0 | — | |
Close digestate | 15,2 | 5,2 | 8,9 | 0,0 | — | 15,2 | 7,2 | 12,5 | 0,0 | — | ||
case 3 | Open digestate | 17,5 | 21,0 | 8,9 | 0,0 | — | 17,5 | 29,3 | 12,5 | 0,0 | — | |
Close digestate | 17,1 | 5,7 | 8,9 | 0,0 | — | 17,1 | 7,9 | 12,5 | 0,0 | — | ||
Biowaste | case 1 | Open digestate | 0,0 | 21,8 | 8,9 | 0,5 | — | 0,0 | 30,6 | 12,5 | 0,5 | — |
Close digestate | 0,0 | 0,0 | 8,9 | 0,5 | — | 0,0 | 0,0 | 12,5 | 0,5 | — | ||
case 2 | Open digestate | 0,0 | 27,9 | 8,9 | 0,5 | — | 0,0 | 39,0 | 12,5 | 0,5 | — | |
Close digestate | 0,0 | 5,9 | 8,9 | 0,5 | — | 0,0 | 8,3 | 12,5 | 0,5 | — | ||
case 3 | Open digestate | 0,0 | 31,2 | 8,9 | 0,5 | — | 0,0 | 43,7 | 12,5 | 0,5 | — | |
Close digestate | 0,0 | 6,5 | 8,9 | 0,5 | — | 0,0 | 9,1 | 12,5 | 0,5 | — |
Biomethane production system | Technological option | TYPICAL VALUE [g CO2eq/MJ] | DEFAULT VALUE [g CO2eq/MJ] | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cultivation | Processing | Upgrading | Transport | Compression at filling station | Manure credits | Cultivation | Processing | Upgrading | Transport | Compression at filling station | Manure credits | |||
Wet manure | Open digestate | no off-gas combustion | 0,0 | 84,2 | 19,5 | 1,0 | 3,3 | – 124,4 | 0,0 | 117,9 | 27,3 | 1,0 | 4,6 | – 124,4 |
off-gas combustion | 0,0 | 84,2 | 4,5 | 1,0 | 3,3 | – 124,4 | 0,0 | 117,9 | 6,3 | 1,0 | 4,6 | – 124,4 | ||
Close digestate | no off-gas combustion | 0,0 | 3,2 | 19,5 | 0,9 | 3,3 | – 111,9 | 0,0 | 4,4 | 27,3 | 0,9 | 4,6 | – 111,9 | |
off-gas combustion | 0,0 | 3,2 | 4,5 | 0,9 | 3,3 | – 111,9 | 0,0 | 4,4 | 6,3 | 0,9 | 4,6 | – 111,9 | ||
Maize whole plant | Open digestate | no off-gas combustion | 18,1 | 20,1 | 19,5 | 0,0 | 3,3 | — | 18,1 | 28,1 | 27,3 | 0,0 | 4,6 | — |
off-gas combustion | 18,1 | 20,1 | 4,5 | 0,0 | 3,3 | — | 18,1 | 28,1 | 6,3 | 0,0 | 4,6 | — | ||
Close digestate | no off-gas combustion | 17,6 | 4,3 | 19,5 | 0,0 | 3,3 | — | 17,6 | 6,0 | 27,3 | 0,0 | 4,6 | — | |
off-gas combustion | 17,6 | 4,3 | 4,5 | 0,0 | 3,3 | — | 17,6 | 6,0 | 6,3 | 0,0 | 4,6 | — | ||
Biowaste | Open digestate | no off-gas combustion | 0,0 | 30,6 | 19,5 | 0,6 | 3,3 | — | 0,0 | 42,8 | 27,3 | 0,6 | 4,6 | — |
off-gas combustion | 0,0 | 30,6 | 4,5 | 0,6 | 3,3 | — | 0,0 | 42,8 | 6,3 | 0,6 | 4,6 | — | ||
Close digestate | no off-gas combustion | 0,0 | 5,1 | 19,5 | 0,5 | 3,3 | — | 0,0 | 7,2 | 27,3 | 0,5 | 4,6 | — | |
off-gas combustion | 0,0 | 5,1 | 4,5 | 0,5 | 3,3 | — | 0,0 | 7,2 | 6,3 | 0,5 | 4,6 | — |
Biomass fuel production system | Transport distance | Greenhouse gas emissions – typical value (g CO2eq/MJ) | Greenhouse gas emissions – default value (g CO2eq/MJ) |
---|---|---|---|
Woodchips from forest residues | 1 to 500 km | 5 | 6 |
500 to 2 500 km | 7 | 9 | |
2 500 to 10 000 km | 12 | 15 | |
Above 10 000 km | 22 | 27 | |
Woodchips from short rotation coppice (Eucalyptus) | 2 500 to 10 000 km | 16 | 18 |
Woodchips from short rotation coppice (Poplar – Fertilised) | 1 to 500 km | 8 | 9 |
500 to 2 500 km | 10 | 11 | |
2 500 to 10 000 km | 15 | 18 | |
Above 10 000 km | 25 | 30 | |
Woodchips from short rotation coppice (Poplar – No fertilisation) | 1 to 500 km | 6 | 7 |
500 to 2 500 km | 8 | 10 | |
2 500 to 10 000 km | 14 | 16 | |
Above 10 000 km | 24 | 28 | |
Woodchips from stemwood | 1 to 500 km | 5 | 6 |
500 to 2 500 km | 7 | 8 | |
2 500 to 10 000 km | 12 | 15 | |
Above 10 000 km | 22 | 27 | |
Woodchips from industry residues | 1 to 500 km | 4 | 5 |
500 to 2 500 km | 6 | 7 | |
2 500 to 10 000 km | 11 | 13 | |
Above 10 000 km | 21 | 25 | |
Wood briquettes or pellets from forest residues (case 1) | 1 to 500 km | 29 | 35 |
500 to 2 500 km | 29 | 35 | |
2 500 to 10 000 km | 30 | 36 | |
Above 10 000 km | 34 | 41 | |
Wood briquettes or pellets from forest residues (case 2a) | 1 to 500 km | 16 | 19 |
500 to 2 500 km | 16 | 19 | |
2 500 to 10 000 km | 17 | 21 | |
Above 10 000 km | 21 | 25 | |
Wood briquettes or pellets from forest residues (case 3a) | 1 to 500 km | 6 | 7 |
500 to 2 500 km | 6 | 7 | |
2 500 to 10 000 km | 7 | 8 | |
Above 10 000 km | 11 | 13 | |
Wood briquettes or pellets from short rotation coppice (Eucalyptus – case 1) | 2 500 to 10 000 km | 33 | 39 |
Wood briquettes or pellets from short rotation coppice (Eucalyptus – case 2a) | 2 500 to 10 000 km | 20 | 23 |
Wood briquettes or pellets from short rotation coppice (Eucalyptus – case 3a) | 2 500 to 10 000 km | 10 | 11 |
Wood briquettes or pellets from short rotation coppice (Poplar – Fertilised – case 1) | 1 to 500 km | 31 | 37 |
500 to 10 000 km | 32 | 38 | |
Above 10 000 km | 36 | 43 | |
Wood briquettes or pellets from short rotation coppice (Poplar – Fertilised – case 2a) | 1 to 500 km | 18 | 21 |
500 to 10 000 km | 20 | 23 | |
Above 10 000 km | 23 | 27 | |
Wood briquettes or pellets from short rotation coppice (Poplar – Fertilised – case 3a) | 1 to 500 km | 8 | 9 |
500 to 10 000 km | 10 | 11 | |
Above 10 000 km | 13 | 15 | |
Wood briquettes or pellets from short rotation coppice (Poplar – no fertilisation – case 1) | 1 to 500 km | 30 | 35 |
500 to 10 000 km | 31 | 37 | |
Above 10 000 km | 35 | 41 | |
Wood briquettes or pellets from short rotation coppice (Poplar – no fertilisation – case 2a) | 1 to 500 km | 16 | 19 |
500 to 10 000 km | 18 | 21 | |
Above 10 000 km | 21 | 25 | |
Wood briquettes or pellets from short rotation coppice (Poplar – no fertilisation – case 3a) | 1 to 500 km | 6 | 7 |
500 to 10 000 km | 8 | 9 | |
Above 10 000 km | 11 | 13 | |
Wood briquettes or pellets from stemwood (case 1) | 1 to 500 km | 29 | 35 |
500 to 2 500 km | 29 | 34 | |
2 500 to 10 000 km | 30 | 36 | |
Above 10 000 km | 34 | 41 | |
Wood briquettes or pellets from stemwood (case 2a) | 1 to 500 km | 16 | 18 |
500 to 2 500 km | 15 | 18 | |
2 500 to 10 000 km | 17 | 20 | |
Above 10 000 km | 21 | 25 | |
Wood briquettes or pellets from stemwood (case 3a) | 1 to 500 km | 5 | 6 |
500 to 2 500 km | 5 | 6 | |
2 500 to 10 000 km | 7 | 8 | |
Above 10 000 km | 11 | 12 | |
Wood briquettes or pellets from wood industry residues (case 1) | 1 to 500 km | 17 | 21 |
500 to 2 500 km | 17 | 21 | |
2 500 to 10 000 km | 19 | 23 | |
Above 10 000 km | 22 | 27 | |
Wood briquettes or pellets from wood industry residues (case 2a) | 1 to 500 km | 9 | 11 |
500 to 2 500 km | 9 | 11 | |
2 500 to 10 000 km | 10 | 13 | |
Above 10 000 km | 14 | 17 | |
Wood briquettes or pellets from wood industry residues (case 3a) | 1 to 500 km | 3 | 4 |
500 to 2 500 km | 3 | 4 | |
2 500 to 10 000 | 5 | 6 | |
Above 10 000 km | 8 | 10 |
Case 1 refers to processes in which a Natural Gas boiler is used to provide the process heat to the pellet mill. Process electricity is purchased from the grid.U.K.
Case 2a refers to processes in which a boiler fuelled with wood chips is used to provide the process heat to the pellet mill. Process electricity is purchased from the grid.U.K.
Case 3a refers to processes in which a CHP, fuelled with wood chips, is used to provide heat and electricity to the pellet mill.U.K.
a This group of materials includes agricultural residues with a low bulk density and it comprises materials such as straw bales, oat hulls, rice husks and sugar cane bagasse bales (not exhaustive list). | |||
b The group of agricultural residues with higher bulk density includes materials such as corn cobs, nut shells, soybean hulls, palm kernel shells (not exhaustive list). | |||
Biomass fuel production system | Transport distance | Greenhouse gas emissions – typical value (g CO2eq/MJ) | Greenhouse gas emissions – default value (g CO2eq/MJ) |
---|---|---|---|
Agricultural Residues with density < 0,2 t/m3 a | 1 to 500 km | 4 | 4 |
500 to 2 500 km | 8 | 9 | |
2 500 to 10 000 km | 15 | 18 | |
Above 10 000 km | 29 | 35 | |
Agricultural Residues with density > 0,2 t/m3 b | 1 to 500 km | 4 | 4 |
500 to 2 500 km | 5 | 6 | |
2 500 to 10 000 km | 8 | 10 | |
Above 10 000 km | 15 | 18 | |
Straw pellets | 1 to 500 km | 8 | 10 |
500 to 10 000 km | 10 | 12 | |
Above 10 000 km | 14 | 16 | |
Bagasse briquettes | 500 to 10 000 km | 5 | 6 |
Above 10 000 km | 9 | 10 | |
Palm Kernel Meal | Above 10 000 km | 54 | 61 |
Palm Kernel Meal (no CH4 emissions from oil mill) | Above 10 000 km | 37 | 40 |
a Open storage of digestate accounts for additional emissions of methane which change with the weather, the substrate and the digestion efficiency. In these calculations the amounts are taken to be equal to 0,05 MJ CH4/MJ biogas for manure, 0,035 MJ CH4/MJ biogas for maize and 0,01 MJ CH4/MJ biogas for biowaste. | ||||
b Close storage means that the digestate resulting from the digestion process is stored in a gas tight tank and the additional biogas released during storage is considered to be recovered for production of additional electricity or biomethane. | ||||
Biogas production system | Technological option | Typical value | Default value | |
---|---|---|---|---|
Greenhouse gas emissions(g CO2eq/MJ) | Greenhouse gas emissions(g CO2eq/MJ) | |||
Biogas for electricity from wet manure | Case 1 | Open digestatea | – 28 | 3 |
Close digestateb | – 88 | – 84 | ||
Case 2 | Open digestate | – 23 | 10 | |
Close digestate | – 84 | – 78 | ||
Case 3 | Open digestate | – 28 | 9 | |
Close digestate | – 94 | – 89 | ||
Biogas for electricity from maize whole plant | Case 1 | Open digestate | 38 | 47 |
Close digestate | 24 | 28 | ||
Case 2 | Open digestate | 43 | 54 | |
Close digestate | 29 | 35 | ||
Case 3 | Open digestate | 47 | 59 | |
Close digestate | 32 | 38 | ||
Biogas for electricity from biowaste | Case 1 | Open digestate | 31 | 44 |
Close digestate | 9 | 13 | ||
Case 2 | Open digestate | 37 | 52 | |
Close digestate | 15 | 21 | ||
Case 3 | Open digestate | 41 | 57 | |
Close digestate | 16 | 22 |
a This category includes the following categories of technologies for biogas upgrade to biomethane: Pressure Swing Adsorption (PSA), Pressure Water Scrubbing (PWS), Membranes, Cryogenic, and Organic Physical Scrubbing (OPS). It includes an emission of 0,03 MJ CH4/MJ biomethane for the emission of methane in the off-gases. | |||
b This category includes the following categories of technologies for biogas upgrade to biomethane: Pressure Water Scrubbing (PWS) when water is recycled, Pressure Swing Adsorption (PSA), Chemical Scrubbing, Organic Physical Scrubbing (OPS), Membranes and Cryogenic upgrading. No methane emissions are considered for this category (the methane in the off-gas is combusted, if any). | |||
Biomethane production system | Technological option | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) |
---|---|---|---|
Biomethane from wet manure | Open digestate, no off-gas combustiona | – 20 | 22 |
Open digestate, off-gas combustionb | – 35 | 1 | |
Close digestate, no off-gas combustion | – 88 | – 79 | |
Close digestate, off-gas combustion | – 103 | – 100 | |
Biomethane from maize whole plant | Open digestate, no off-gas combustion | 58 | 73 |
Open digestate, off-gas combustion | 43 | 52 | |
Close digestate, no off-gas combustion | 41 | 51 | |
Close digestate, off-gas combustion | 26 | 30 | |
Biomethane from biowaste | Open digestate, no off-gas combustion | 51 | 71 |
Open digestate, off-gas combustion | 36 | 50 | |
Close digestate, no off-gas combustion | 25 | 35 | |
Close digestate, off-gas combustion | 10 | 14 |
Biogas production system | Technological options | Greenhouse gas emissions – typical value(g CO2eq/MJ) | Greenhouse gas emissions – default value(g CO2eq/MJ) | |
---|---|---|---|---|
Manure – Maize 80 % - 20 % | Case 1 | Open digestate | 17 | 33 |
Close digestate | – 12 | – 9 | ||
Case 2 | Open digestate | 22 | 40 | |
Close digestate | – 7 | – 2 | ||
Case 3 | Open digestate | 23 | 43 | |
Close digestate | – 9 | – 4 | ||
Manure – Maize 70 % - 30 % | Case 1 | Open digestate | 24 | 37 |
Close digestate | 0 | 3 | ||
Case 2 | Open digestate | 29 | 45 | |
Close digestate | 4 | 10 | ||
Case 3 | Open digestate | 31 | 48 | |
Close digestate | 4 | 10 | ||
Manure – Maize 60 % - 40 % | Case 1 | Open digestate | 28 | 40 |
Close digestate | 7 | 11 | ||
Case 2 | Open digestate | 33 | 47 | |
Close digestate | 12 | 18 | ||
Case 3 | Open digestate | 36 | 52 | |
Close digestate | 12 | 18 |
Case 1 refers to pathways in which electricity and heat required in the process are supplied by the CHP engine itself.U.K.
Case 2 refers to pathways in which the electricity required in the process is taken from the grid and the process heat is supplied by the CHP engine itself. In some Member States, operators are not allowed to claim the gross production for subsidies and case 1 is the more likely configuration.U.K.
Case 3 refers to pathways in which the electricity required in the process is taken from the grid and the process heat is supplied by a biogas boiler. This case applies to some installations in which the CHP engine is not on-site and biogas is sold (but not upgraded to biomethane).U.K.
Biomethane production system | Technological options | Typical value | Default value |
---|---|---|---|
(g CO2eq/MJ) | (g CO2eq/MJ) | ||
Manure – Maize 80 % - 20 % | Open digestate, no off-gas combustion | 32 | 57 |
Open digestate, off-gas combustion | 17 | 36 | |
Close digestate, no off-gas combustion | – 1 | 9 | |
Close digestate, off-gas combustion | – 16 | – 12 | |
Manure – Maize 70 % - 30 % | Open digestate, no off-gas combustion | 41 | 62 |
Open digestate, off-gas combustion | 26 | 41 | |
Close digestate, no off-gas combustion | 13 | 22 | |
Close digestate, off-gas combustion | – 2 | 1 | |
Manure – Maize 60 % - 40 % | Open digestate, no off-gas combustion | 46 | 66 |
Open digestate, off-gas combustion | 31 | 45 | |
Close digestate, no off-gas combustion | 22 | 31 | |
Close digestate, off-gas combustion | 7 | 10 |
Where biomethane is used as Compressed Biomethane as a transport fuel, a value of 3,3 g CO2eq/MJ biomethane needs to be added to the typical values and a value of 4,6 g CO2eq/MJ biomethane to the default values.
The amount of aerothermal, geothermal or hydrothermal energy captured by heat pumps to be considered to be energy from renewable sources for the purposes of this Directive, ERES, shall be calculated in accordance with the following formula:
ERES = Qusable * (1 – 1/SPF)
where
=
the estimated total usable heat delivered by heat pumps fulfilling the criteria referred to in Article 7(4), implemented as follows: Only heat pumps for which SPF > 1,15 * 1/η shall be taken into account,
=
the estimated average seasonal performance factor for those heat pumps,
=
the ratio between total gross production of electricity and the primary energy consumption for the production of electricity and shall be calculated as an EU average based on Eurostat data.
a The mean values included here represent a weighted average of the individually modelled feedstock values. | ||
b The range included here reflects 90 % of the results using the fifth and ninety-fifth percentile values resulting from the analysis. The fifth percentile suggests a value below which 5 % of the observations were found (namely, 5 % of total data used showed results below 8, 4, and 33 g CO2eq/MJ). The ninety-fifth percentile suggests a value below which 95 % of the observations were found (namely, 5 % of total data used showed results above 16, 17, and 66 g CO2eq/MJ). | ||
Feedstock group | Meana | Interpercentile range derived from the sensitivity analysisb |
---|---|---|
Cereals and other starch-rich crops | 12 | 8 to 16 |
Sugars | 13 | 4 to 17 |
Oil crops | 55 | 33 to 66 |
Biofuels, bioliquids and biomass fuels produced from the following feedstock categories will be considered to have estimated indirect land-use change emissions of zero:
feedstocks which are not listed under part A of this Annex.
feedstocks, the production of which has led to direct land-use change, namely, a change from one of the following IPCC land cover categories: forest land, grassland, wetlands, settlements, or other land, to cropland or perennial cropland(17). In such a case a direct land-use change emission value (el) should have been calculated in accordance with point 7 of part C of Annex V.
Part A. Feedstocks for the production of biogas for transport and advanced biofuels, the contribution of which towards the minimum shares referred to in the first and fourth subparagraphs of Article 25(1) may be considered to be twice their energy content:
Algae if cultivated on land in ponds or photobioreactors;
Biomass fraction of mixed municipal waste, but not separated household waste subject to recycling targets under point (a) of Article 11(2) of Directive 2008/98/EC;
Biowaste as defined in point (4) of Article 3 of Directive 2008/98/EC from private households subject to separate collection as defined in point (11) of Article 3 of that Directive;
Biomass fraction of industrial waste not fit for use in the food or feed chain, including material from retail and wholesale and the agro-food and fish and aquaculture industry, and excluding feedstocks listed in part B of this Annex;
Straw;
Animal manure and sewage sludge;
Palm oil mill effluent and empty palm fruit bunches;
Tall oil pitch;
Crude glycerine;
Bagasse;
Grape marcs and wine lees;
Nut shells;
Husks;
Cobs cleaned of kernels of corn;
Biomass fraction of wastes and residues from forestry and forest-based industries, namely, bark, branches, pre-commercial thinnings, leaves, needles, tree tops, saw dust, cutter shavings, black liquor, brown liquor, fibre sludge, lignin and tall oil;
Other non-food cellulosic material;
Other ligno-cellulosic material except saw logs and veneer logs.
Part B. Feedstocks for the production of biofuels and biogas for transport, the contribution of which towards the minimum share established in the first subparagraph of Article 25(1) shall be limited and may be considered to be twice their energy content:
Used cooking oil;
Animal fats classified as categories 1 and 2 in accordance with Regulation (EC) No 1069/2009.
Directive 2009/28/EC of the European Parliament and of the Council | |
Council Directive 2013/18/EU | |
Directive (EU) 2015/1513 of the European Parliament and of the Council | Only Article 2 |
Directive | Time-limit for transposition |
---|---|
2009/28/EC | 25 June 2009 |
2013/18/EU | 1 July 2013 |
(EU) 2015/1513 | 10 September 2017 |
Directive 2009/28/EC | This Directive |
---|---|
Article 1 | Article 1 |
Article 2, first subparagraph | Article 2, first subparagraph |
Article 2, second subparagraph, introductory wording | Article 2, second subparagraph, introductory wording |
Article 2, second subparagraph, point (a) | Article 2, second subparagraph, point (1) |
Article 2, second subparagraph, point (b) | — |
— | Article 2, second subparagraph, point (2) |
Article 2, second subparagraph, point (c) | Article 2, second subparagraph, point (3) |
Article 2, second subparagraph, point (d) | — |
Article 2, second subparagraph, points (e), (f), (g), (h), (i), (j), (k), (l), (m), (n), (o), (p), (q), (r), (s), (t), (u), (v) and (w) | Article 2, second subparagraph, points (24), (4), (19), (32), (33), (12), (5), (6), (45), (46), (47), (23), (39), (41), (42), (43), (36), (44) and (37) |
— | Article 2, second subparagraph, points (7), (8), (9), (10), (11), (13), (14), (15), (16), (17), (18), (20), (21), (22), (25), (26), (27), (28), (29), (30), (31), (34), (35), (38) and (40) |
Article 3 | — |
— | Article 3 |
Article 4 | — |
— | Article 4 |
— | Article 5 |
— | Article 6 |
Article 5(1) | Article 7(1) |
Article 5(2) | — |
Article 5(3) | Article 7(2) |
Article 5(4), first, second, third and fourth subparagraphs | Article 7(3), first, second, third and fourth subparagraphs |
— | Article 7(3), fifth and sixth subparagraphs |
— | Article 7(4) |
Article 5(5), | Article 27(1), first subparagraph, point (c) |
Article 5(6) and (7) | Article 7(5) and (6) |
Article 6(1) | Article 8(1) |
— | Article 8(2) and (3) |
Article 6(2) and (3) | Article 8(4) and (5) |
Article 7(1), (2), (3), (4) and (5) | Article 9(1), (2), (3), (4) and (5) |
— | Article 9(6) |
Article 8 | Article 10 |
Article 9(1) | Article 11(1) |
Article 9(2), first subparagraph, points (a), (b) and (c) | Article 11(2), first subparagraph, points (a), (b) and (c) |
— | Article 11(2), first subparagraph, point (d) |
Article 10 | Article 12 |
Article 11(1), (2) and (3) | Article 13(1), (2) and (3) |
— | Article 13(4) |
Article 12 | Article 14 |
Article 13(1), first subparagraph | Article 15(1), first subparagraph |
Article 13(1), second subparagraph | Article 15(1), second subparagraph |
Article 13(1), second subparagraph, points (a) and (b) | — |
Article 13(1), second subparagraph, points (c), (d), (e) and (f) | Article 15(1), second subparagraph, points (a), (b), (c) and (d) |
Article 13(2), (3), (4) and (5) | Article 15(2), (3), (4) and (5) |
Article 13(6), first subparagraph | Article 15(6), first subparagraph |
Article 13(6), second, third, fourth and fifth subparagraphs | — |
— | Article 15, (7) and (8) |
— | Article 16 |
— | Article 17 |
Article 14 | Article 18 |
Article 15(1) | Article 19(1) |
Article 15(2), first, second and third subparagraphs | Article 19(2) first, second and third subparagraphs |
— | Article 19(2), fourth and fifth subparagraphs |
Article 15(2), fourth subparagraph | Article 19(2), sixth subparagraph |
Article 15(3) | — |
— | Article 19(3) and (4) |
Article 15(4) and (5) | Article 19(5) and (6) |
Article 15(6), first subparagraph, point (a) | Article 19(7), first subparagraph, point (a) |
Article 15(6), first subparagraph, point (b)(i) | Article 19(7), first subparagraph, point (b)(i) |
— | Article 19(7), first subparagraph, point (b)(ii) |
Article 15(6), first subparagraph, point (b)(ii) | Article 19(7), first subparagraph, point (b)(iii) |
Article 15(6), first subparagraph, points (c), (d), (e) and (f) | Article 19(7), first subparagraph, points (c), (d), (e) and (f) |
— | Article 19(7), second subparagraph |
Article 15(7) | Article 19(8) |
Article 15(8) | — |
Article 15(9) and (10) | Article 19(9) and (10) |
— | Article 19(11) |
Article 15(11) | Article 19(12) |
Article 15(12) | — |
— | Article 19(13) |
Article 16(1), (2), (3), (4), (5), (6), (7) and (8) | — |
Article 16(9), (10) and (11) | Article 20(1), (2) and (3) |
— | Article 21 |
— | Article 22 |
— | Article 23 |
— | Article 24 |
— | Article 25 |
— | Article 26 |
— | Article 27 |
— | Article 28 |
Article 17(1), first and second subparagraphs | Article 29(1), first and second subparagraphs |
— | Article 29(1), third, fourth and fifth subparagraphs |
— | Article 29(2) |
Article 17(2), first and second subparagraphs | — |
Article 17(2), third subparagraph | Article 29(10), third subparagraph |
Article 17(3), first subparagraph, point (a) | Article 29(3), first subparagraph, point (a) |
— | Article 29(3), first subparagraph, point (b) |
Article 17(3), first subparagraph, points (b) and (c) | Article 29(3), first subparagraph, points (c) and (d) |
— | Article 29(3), second subparagraph |
Article 17(4) | Article 29(4) |
Article 17(5) | Article 29(5) |
Article 17(6) and (7) | — |
— | Article 29(6), (7), (8), (9), (10) and (11) |
Article 17(8) | Article 29(12) |
Article 17(9) | — |
— | Article 29(13) and (14) |
Article 18(1), first subparagraph | Article 30(1), first subparagraph |
Article 18(1), first subparagraph, points (a), (b) and (c) | Article 30(1), first subparagraph, points (a), (c) and (d) |
— | Article 30(1), first subparagraph, point (b) |
— | Article 30(1), second subparagraph |
Article 18(2) | — |
— | Article 30(2) |
Article 18(3), first subparagraph | Article 30(3), first subparagraph |
Article 18(3), second and third subparagraphs | — |
Article 18(3), fourth and fifth subparagraphs | Article 30(3), second and third subparagraphs |
Article 18(4), first subparagraph | — |
Article 18(4), second and third subparagraphs | Article 30(4), first and second subparagraphs |
Article 18(4), fourth subparagraph | — |
Article 18(5), first and second subparagraphs | Article 30(7), first and second subparagraphs |
Article 18(5), third subparagraph | Article 30(8), first and second subparagraphs |
Article 18(5), fourth subparagraph | Article 30(5), third subparagraph |
— | Article 30(6), first subparagraph |
Article 18(5), fifth subparagraph | Article 30(6), second subparagraph |
Article 18(6), first and second subparagraphs | Article 30(5), first and second subparagraphs |
Article 18(6), third subparagraph | — |
Article 18(6), fourth subparagraph | Article 30(6), third subparagraph |
— | Article 30(6), fourth subparagraph |
Article 18(6), fifth subparagraph | Article 30(6), fifth subparagraph |
Article 18(7) | Article 30(9), first subparagraph |
— | Article 30(9), second subparagraph |
Article 18(8) and (9) | — |
— | Article 30(10) |
Article 19(1), first subparagraph | Article 31(1), first subparagraph |
Article 19(1), first subparagraph, points (a), (b) and (c) | Article 31(1), first subparagraph, points (a), (b) and (c) |
— | Article 31(1), first subparagraph, point (d) |
Article 19(2), (3) and (4) | Article 31(2), (3) and (4) |
Article 19(5) | — |
Article 19(7), first subparagraph | Article 31(5), first subparagraph |
Article 19(7), first subparagraph, first, second third and fourth indents | — |
Article 19(7), second and third subparagraphs | Article 31(5), second and third subparagraphs |
Article 19(8) | Article 31(6) |
Article 20 | Article 32 |
Article 22 | — |
Article 23(1) and (2) | Article 33(1) and (2) |
Article 23(3), (4), (5), (6), (7) and (8) | — |
Article 23(9) | Article 33(3) |
Article 23(10) | Article 33(4) |
Article 24 | — |
Article 25(1) | Article 34(1) |
Article 25(2) | Article 34(2) |
Article 25(3) | Article 34(3) |
Article 25a(1) | Article 35(1) |
Article 25a(2) | Article 35(2) and (3) |
Article 25a(3) | Article 35(4) |
— | Article 35(5) |
Article 25a(4) and (5) | Article 35(6) and (7) |
Article 26 | — |
Article 27 | Article 36 |
— | Article 37 |
Article 28 | Article 38 |
Article 29 | Article 39 |
Annex I | Annex I |
Annex II | Annex II |
Annex III | Annex III |
Annex IV | Annex IV |
Annex V | Annex V |
Annex VI | — |
— | Annex VI |
Annex VII | Annex VII |
Annex VIII | Annex VIII |
Annex IX | Annex IX |
— | Annex X |
— | Annex XI |
In order to be able to achieve the national objectives set out in this Annex, it is underlined that the State aid guidelines for environmental protection recognise the continued need for national mechanisms of support for the promotion of energy from renewable sources.
Heat or waste heat is used to generate cooling (chilled air or water) through absorption chillers . Therefore, it is appropriate to calculate only the emissions associated to the heat produced per MJ of heat, irrespectively if the end-use of the heat is actual heating or cooling via absorption chillers.
The formula for calculating greenhouse gas emissions from the extraction or cultivation of raw materials eec describes cases where feedstock is converted into biofuels in one step. For more complex supply chains, adjustments are needed for calculating greenhouse gas emissions from the extraction or cultivation of raw materials eec for intermediate products.
Measurements of soil carbon can constitute such evidence, e.g. by a first measurement in advance of the cultivation and subsequent ones at regular intervals several years apart. In such a case, before the second measurement is available, increase in soil carbon would be estimated on the basis of representative experiments or soil models. From the second measurement onwards, the measurements would constitute the basis for determining the existence of an increase in soil carbon and its magnitude.
The quotient obtained by dividing the molecular weight of CO2 (44,010 g/mol) by the molecular weight of carbon (12,011 g/mol) is equal to 3,664.
Commission Decision 2010/335/EU of 10 June 2010 on guidelines for the calculation of land carbon stocks for the purpose of Annex V to Directive 2009/28/EC (OJ L 151, 17.6.2010, p. 19).
Regulation (EU) 2018/841 of the European Parliament and of the Council of 30 May 2018 on the inclusion of greenhouse gas emissions and removals from land use, land use change and forestry in the 2030 climate and energy framework, and amending Regulation (EU) No 525/2013 and Decision No 529/2013/EU (OJ L 156, 19.6.2018, p. 1).
Directive 2009/31/EC of the European Parliament and of the Council of 23 April 2009 on the geological storage of carbon dioxide and amending Council Directive 85/337/EEC, European Parliament and Council Directives 2000/60/EC, 2001/80/EC, 2004/35/EC, 2006/12/EC, 2008/1/EC and Regulation (EC) No 1013/2006 (OJ L 140, 5.6.2009, p. 114).
Heat or waste heat is used to generate cooling (chilled air or water) through absorption chillers. Therefore, it is appropriate to calculate only the emissions associated to the heat produced, per MJ of heat, irrespectively if the end-use of the heat is actual heating or cooling via absorption chillers.
The formula for calculating greenhouse gas emissions from the extraction or cultivation of raw materials eec describes cases where feedstock is converted into biofuels in one step. For more complex supply chains, adjustments are needed for calculating greenhouse gas emissions from the extraction or cultivation of raw materials eec for intermediate products.
Measurements of soil carbon can constitute such evidence, e.g. by a first measurement in advance of the cultivation and subsequent ones at regular intervals several years apart. In such a case, before the second measurement is available, increase in soil carbon would be estimated on the basis of representative experiments or soil models. From the second measurement onwards, the measurements would constitute the basis for determining the existence of an increase in soil carbon and its magnitude.
The quotient obtained by dividing the molecular weight of CO2 (44,010 g/mol) by the molecular weight of carbon (12,011 g/mol) is equal to 3,664.
Cropland as defined by IPCC.
Perennial crops are defined as multi-annual crops, the stem of which is usually not annually harvested such as short rotation coppice and oil palm.
Commission Decision 2010/335/EU of 10 June 2010 on guidelines for the calculation of land carbon stocks for the purpose of Annex V to Directive 2009/28/EC (OJ L 151, 17.6.2010, p. 19).
The mean values reported here represent a weighted average of the individually modelled feedstock values. The magnitude of the values in the Annex is sensitive to the range of assumptions (such as treatment of co-products, yield developments, carbon stocks and displacement of other commodities) used in the economic models developed for their estimation. Although it is therefore not possible to fully characterise the uncertainty range associated with such estimates, a sensitivity analysis conducted on the results based on a random variation of key parameters, a so-called Monte Carlo analysis, was conducted.
Perennial crops are defined as multi-annual crops, the stem of which is usually not annually harvested such as short rotation coppice and oil palm.
The Whole Directive you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys