- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Commission Delegated Directive (EU) 2019/172Dangos y teitl llawn
Commission Delegated Directive (EU) 2019/172 of 16 November 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip chip packages (Text with EEA relevance)
You are here:
- Cyfarwyddebau yn deillio o’r UE
- 2019 No. 172
- Introduction
Pa Fersiwn
Rhagor o Adnoddau
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae hon yn eitem o ddeddfwriaeth sy’n deillio o’r UE
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
Status:
Dyma’r fersiwn wreiddiol (fel y’i gwnaed yn wreiddiol).
Commission Delegated Directive (EU) 2019/172
of 16 November 2018
amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip chip packages
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(1) and in particular Article 5(1)(a) thereof,
Whereas:
(1) Directive 2011/65/EU requires Member States to ensure that electrical and electronic equipment placed on the market does not contain certain hazardous substances listed in Annex II to that Directive. That requirement does not apply to the applications listed in Annex III to Directive 2011/65/EU.
(2) The different categories of electrical and electronic equipment for which Directive 2011/65/EU applies (categories 1 to 11) are listed in Annex I to that Directive.
(3) Lead is a restricted substance listed in Annex II to Directive 2011/65/EU. The use of lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip chip packages was, however, exempted from the restriction and is currently listed in entry 15 of Annex III to that Directive. The expiry date of that exemption was, for categories 1 to 7 and 10, 21 July 2016.
(4) The Commission received an application for renewal of that exemption before 21 January 2015, in accordance with Article 5(5) of Directive 2011/65/EU. The exemption remains valid until a decision on that application has been adopted.
(5) Leaded solders are used in flip chip connections as bumps and solders for attaching the die to the chip carrier. The solders must be resistant to electromigration failure at the extremely high current densities required and able to create a solder hierarchy that allows staged assembly and rework of components in the manufacturing process. They must also have high ductility to reduce thermo-mechanical stress in under bump metallurgy structures, in particular in larger dies.
(6) For certain applications covered by the current exemption, a substitution or elimination of lead is still scientifically and technically impracticable due to the lack of reliable substitutes. The exemption does not weaken the environmental and health protection afforded by Regulation (EC) No 1907/2006 of the European Parliament and of the Council(2). It should therefore be renewed for those particular applications.
(7) For all other applications currently covered by the exemption, the conditions for renewal are not fulfilled. The exemption for those applications should continue to apply for 12 months after the date of entry into force of this Delegated Directive in accordance with Article 5(6) of Directive 2011/65/EU.
(8) Since, for the applications concerned by that renewal, no reliable alternatives are available on the market, the exemption for those applications should be renewed for categories 1 to 7 and 10 for the maximum duration of five years until 21 July 2021. In view of the results of the ongoing efforts to find a reliable substitution, the duration of the exemption is unlikely to have adverse impacts on innovation.
(9) For categories other than 1 to 7 and 10, the existing exemption remains valid as per the validity periods set out in the second subparagraph of Article 5(2) of Directive 2011/65/EU. For reasons of clarity, the dates of expiry should be added in Annex III to that Directive.
(10) Directive 2011/65/EU should therefore be amended accordingly,
HAS ADOPTED THIS DIRECTIVE:
(2)
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) and establishing a European Chemicals Agency (OJ L 396, 30.12.2006, p. 1).
Options/Help
Print Options
PrintThe Whole Directive
PrintThis Introductory Text only
Mae deddfwriaeth ar gael mewn fersiynau gwahanol:
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Dewisiadau Agor
Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd
Rhagor o Adnoddau
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
- y PDF print gwreiddiol y fel adopted version that was used for the EU Official Journal
- rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
- pob fformat o’r holl ddogfennau cysylltiedig
- slipiau cywiro
- dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Rhagor o Adnoddau
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
- y PDF print gwreiddiol y fel adopted fersiwn a ddefnyddiwyd am y copi print
- slipiau cywiro
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys
- rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
- manylion rhoi grym a newid cyffredinol
- pob fformat o’r holl ddogfennau cysylltiedig
- dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Mae’r holl gynnwys ar gael dan Drwydded Llywodraeth Agored v3.0 ac eithrio ble nodir yn wahanol. Yn ychwanegol mae’r safle hwn â chynnwys sy’n deillio o EUR-Lex, a ailddefnyddiwyd dan delerau Penderfyniad y Comisiwn 2011/833/EU ar ailddefnyddio dogfennau o sefydliadau’r UE. Am ragor o wybodaeth gweler ddatganiad cyhoeddus Swyddfa Gyhoeddiadau’r UE ar ailddefnyddio.