Commission Delegated Directive (EU) 2019/1846Dangos y teitl llawn

Commission Delegated Directive (EU) 2019/1846

of 8 August 2019

amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders used in certain combustion engines

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(1) and in particular Article 5(1)(a) thereof,

Whereas:

(1) Directive 2011/65/EU requires Member States to ensure that electrical and electronic equipment placed on the market does not contain the hazardous substances listed in Annex II to that Directive. That requirement does not apply to the applications listed in Annex III to Directive 2011/65/EU.

(2) The different categories of electrical and electronic equipment to which Directive 2011/65/EU applies are listed in Annex I to that Directive.

(3) Lead is a restricted substance listed in Annex II to Directive 2011/65/EU. On 29 June 2017, the Commission received an application made in accordance with Article 5(3) of Directive 2011/65/EU for an exemption to be listed in Annex III to Directive 2011/65/EU, for the use of lead in solders of sensors, actuators and engine control units that are used to monitor and control engine systems including turbochargers and exhaust emission controls of internal combustion engines used in equipment that are not intended to be used solely by consumers (‘the requested exemption’).

(4) The evaluation of the requested exemption included stakeholder consultations in accordance with Article 5(7) of Directive 2011/65/EU.

(5) Each engine within scope of the requested exemption is equipped with specific types of sensors, actuators and engine control units that monitor and control its emissions to ensure compliance with Regulation (EU) 2016/1628 of the European Parliament and of the Council(2). The conditions experienced in and close to such engine and an exhaust system can be so severe in terms of elevated temperatures and vibration levels that they may cause early failure of solder bonds.

(6) Currently, for the applications of lead covered by the requested exemption, additional time is needed for testing to ensure the reliability of available lead-free substitutes.

(7) Due to the lack of reliable alternatives, a substitution or elimination of lead is scientifically and technically impracticable in certain combustion engines. The requested exemption is consistent with Regulation (EC) No 1907/2006 of the European Parliament and of the Council(3) and thus does not weaken the environmental and health protection afforded by it.

(8) It is, therefore, appropriate to grant the requested exemption by including the applications covered by it in Annex III to Directive 2011/65/EU with respect to electrical and electronic equipment of category 11 of Annex I to Directive 2011/65/EU.

(9) The exemption should be granted for the maximum validity period of 5 years starting from 22 July 2019, in accordance with Article 4(3) and the first subparagraph of Article 5(2) of Directive 2011/65/EU. In view of the results of the ongoing efforts to find a reliable substitution, the duration of the exemption is unlikely to have adverse impacts on innovation.

(10) Directive 2011/65/EU should therefore be amended accordingly,

HAS ADOPTED THIS DIRECTIVE:

Article 1 U.K.

Annex III to Directive 2011/65/EU is amended as set out in the Annex to this Directive.

Article 2 U.K.

1. Member States shall adopt and publish, by 30 April 2020 at the latest, the laws, regulations and administrative provisions necessary to comply with this Directive. They shall forthwith communicate to the Commission the text of those provisions.

They shall apply those provisions from 1 May 2020.

When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.

2. Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.

Article 3 U.K.

This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

Article 4 U.K.

This Directive is addressed to the Member States.

Done at Brussels, 8 August 2019.

For the Commission

The President

Jean-Claude Juncker

ANNEX U.K.

In Annex III to Directive 2011/65/EU, the following entry 44 is added:

a Regulation (EU) 2016/1628 of the European Parliament and of the Council of 14 September 2016 on requirements relating to gaseous and particulate pollutant emission limits and type-approval for internal combustion engines for non-road mobile machinery, amending Regulations (EU) No 1024/2012 and (EU) No 167/2013, and amending and repealing Directive 97/68/EC (OJ L 252, 16.9.2016, p. 53).’
‘44	Lead in solder of sensors, actuators, and engine control units of combustion engines within the scope of Regulation (EU) 2016/1628 of the European Parliament and of the Councila, installed in equipment used at fixed positions while in operation which is designed for professionals, but also used by non-professional users	Applies to category 11 and expires on 21 July 2024.

(1)

OJ L 174, 1.7.2011, p. 88.

(2)

Regulation (EU) 2016/1628 of the European Parliament and of the Council of 14 September 2016 on requirements relating to gaseous and particulate pollutant emission limits and type-approval for internal combustion engines for non-road mobile machinery, amending Regulations (EU) No 1024/2012 and (EU) No 167/2013, and amending and repealing Directive 97/68/EC (OJ L 252, 16.9.2016, p. 53).

(3)

Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) and establishing a European Chemicals Agency (OJ L 396, 30.12.2006, p. 1).