Regulation (EC) No 166/2006 of the European Parliament and of the CouncilDangos y teitl llawn

ANNEX I U.K. Activities

a An asterisk (*) indicates that no capacity threshold is applicable (all facilities are subject to reporting).
b OJ L 332, 28.12.2000, p. 91.
c OJ L 182, 16.7.1999, p. 1. Directive as amended by Regulation (EC) No 1882/2003.
d The capacity threshold shall be reviewed by 2010 at the latest in the light of the results of the first reporting cycle.
No	Activity	Capacity threshold
1.	Energy sector
(a)	Mineral oil and gas refineries	*a
(b)	Installations for gasification and liquefaction	*
(c)	Thermal power stations and other combustion installations	With a heat input of 50 megawatts (MW)
(d)	Coke ovens	*
(e)	Coal rolling mills	With a capacity of 1 tonne per hour
(f)	Installations for the manufacture of coal products and solid smokeless fuel	*
2.	Production and processing of metals
(a)	Metal ore (including sulphide ore) roasting or sintering installations	*
(b)	Installations for the production of pig iron or steel (primary or secondary melting) including continuous casting	With a capacity of 2,5 tonnes per hour
(c)	Installations for the processing of ferrous metals:
	(i) Hot-rolling mills	With a capacity of 20 tonnes of crude steel per hour
	(ii) Smitheries with hammers	With an energy of 50 kilojoules per hammer, where the calorific power used exceeds 20 MW
	(iii) Application of protective fused metal coats	With an input of 2 tonnes of crude steel per hour
(d)	Ferrous metal foundries	With a production capacity of 20 tonnes per day
(e)	Installations:
	(i) For the production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes	*
	(ii) For the smelting, including the alloying, of non-ferrous metals, including recovered products (refining, foundry casting, etc.)	With a melting capacity of 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals
(f)	Installations for surface treatment of metals and plastic materials using an electrolytic or chemical process	Where the volume of the treatment vats equals 30 m3
3.	Mineral industry
(a)	Underground mining and related operations	*
(b)	Opencast mining and quarrying	Where the surface of the area effectively under extractive operation equals 25 hectares
(c)	Installations for the production of:
	(i) Cement clinker in rotary kilns	With a production capacity of 500 tonnes per day
	(ii) Lime in rotary kilns	With a production capacity of 50 tonnes per day
	(iii) Cement clinker or lime in other furnaces	With a production capacity of 50 tonnes per day
(d)	Installations for the production of asbestos and the manufacture of asbestos-based products	*
(e)	Installations for the manufacture of glass, including glass fibre	With a melting capacity of 20 tonnes per day
(f)	Installations for melting mineral substances, including the production of mineral fibres	With a melting capacity of 20 tonnes per day
(g)	Installations for the manufacture of ceramic products by firing, in particular roofing tiles, bricks, refractory bricks, tiles, stoneware or porcelain	With a production capacity of 75 tonnes per day, or with a kiln capacity of 4 m3 and with a setting density per kiln of 300 kg/m3
4.	Chemical industry
(a)	Chemical installations for the production on an industrial scale of basic organic chemicals, such as: (i) Simple hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or aromatic) (ii) Oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters, acetates, ethers, peroxides, epoxy resins (iii) Sulphurous hydrocarbons (iv) Nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates (v) Phosphorus-containing hydrocarbons (vi) Halogenic hydrocarbons (vii) Organometallic compounds (viii) Basic plastic materials (polymers, synthetic fibres and cellulose-based fibres) (ix) Synthetic rubbers (x) Dyes and pigments (xi) Surface-active agents and surfactants	*
(b)	Chemical installations for the production on an industrial scale of basic inorganic chemicals, such as: (i) Gases, such as ammonia, chlorine or hydrogen chloride, fluorine or hydrogen fluoride, carbon oxides, sulphur compounds, nitrogen oxides, hydrogen, sulphur dioxide, carbonyl chloride (ii) Acids, such as chromic acid, hydrofluoric acid, phosphoric acid, nitric acid, hydrochloric acid, sulphuric acid, oleum, sulphurous acids (iii) Bases, such as ammonium hydroxide, potassium hydroxide, sodium hydroxide (iv) Salts, such as ammonium chloride, potassium chlorate, potassium carbonate, sodium carbonate, perborate, silver nitrate (v) Non-metals, metal oxides or other inorganic compounds such as calcium carbide, silicon, silicon carbide	*
(c)	Chemical installations for the production on an industrial scale of phosphorous-, nitrogen- or potassium-based fertilisers (simple or compound fertilisers)	*
(d)	Chemical installations for the production on an industrial scale of basic plant health products and of biocides	*
(e)	Installations using a chemical or biological process for the production on an industrial scale of basic pharmaceutical products	*
(f)	Installations for the production on an industrial scale of explosives and pyrotechnic products	*
5.	Waste and wastewater management
(a)	Installations for the recovery or disposal of hazardous waste	Receiving 10 tonnes per day
(b)	Installations for the incineration of non-hazardous waste in the scope of Directive 2000/76/EC of the European Parliament and of the Council of 4 December 2000 on the incineration of wasteb	With a capacity of 3 tonnes per hour
(c)	Installations for the disposal of non-hazardous waste	With a capacity of 50 tonnes per day
(d)	Landfills (excluding landfills of inert waste and landfills, which were definitely closed before 16.7.2001 or for which the after-care phase required by the competent authorities according to Article 13 of Council Directive 1999/31/EC of 26 April 1999 on the landfill of wastec has expired)	Receiving 10 tonnes per day or with a total capacity of 25 000 tonnes
(e)	Installations for the disposal or recycling of animal carcasses and animal waste	With a treatment capacity of 10 tonnes per day
(f)	Urban waste-water treatment plants	With a capacity of 100 000 population equivalents
(g)	Independently operated industrial waste-water treatment plants which serve one or more activities of this annex	With a capacity of 10 000 m3 per dayd
6.	Paper and wood production and processing
(a)	Industrial plants for the production of pulp from timber or similar fibrous materials	*
(b)	Industrial plants for the production of paper and board and other primary wood products (such as chipboard, fibreboard and plywood)	With a production capacity of 20 tonnes per day
(c)	Industrial plants for the preservation of wood and wood products with chemicals	With a production capacity of 50 m3 per day
7.	Intensive livestock production and aquaculture
(a)	Installations for the intensive rearing of poultry or pigs	(i) With 40 000 places for poultry (ii) With 2 000 places for production pigs (over 30 kg) (iii) With 750 places for sows
(b)	Intensive aquaculture	With a production capacity of 1 000 tonnes of fish or shellfish per year
8.	Animal and vegetable products from the food and beverage sector
(a)	Slaughterhouses	With a carcass production capacity of 50 tonnes per day
(b)	Treatment and processing intended for the production of food and beverage products from:
	(i) Animal raw materials (other than milk)	With a finished product production capacity of 75 tonnes per day
	(ii) Vegetable raw materials	With a finished product production capacity of 300 tonnes per day (average value on a quarterly basis)
(c)	Treatment and processing of milk	With a capacity to receive 200 tonnes of milk per day (average value on an annual basis)
9.	Other activities
(a)	Plants for the pre-treatment (operations such as washing, bleaching, mercerisation) or dyeing of fibres or textiles	With a treatment capacity of 10 tonnes per day
(b)	Plants for the tanning of hides and skins	With a treatment capacity of 12 tonnes of finished product per day
(c)	Installations for the surface treatment of substances, objects or products using organic solvents, in particular for dressing, printing, coating, degreasing, waterproofing, sizing, painting, cleaning or impregnating	With a consumption capacity of 150 kg per hour or 200 tonnes per year
(d)	Installations for the production of carbon (hard-burnt coal) or electro-graphite by means of incineration or graphitisation	*
(e)	Installations for the building of, and painting or removal of paint from ships	With a capacity for ships 100 m long

ANNEX II U.K. Pollutants(1)

a Unless otherwise specified any pollutant specified in Annex II shall be reported as the total mass of that pollutant or, where the pollutant is a group of substances, as the total mass of the group.
b A hyphen (—) indicates that the parameter and medium in question do not trigger a reporting requirement.
c Total mass of hydrogen fluorocarbons: sum of HFC23, HFC32, HFC41, HFC4310mee, HFC125, HFC134, HFC134a, HFC152a, HFC143, HFC143a, HFC227ea, HFC236fa, HFC245ca, HFC365mfc.
d Total mass of perfluorocarbons: sum of CF4, C2F6, C3F8, C4F10, c-C4F8, C5F12, C6F14.
e Total mass of substances including their isomers listed in Group VIII of Annex I to Regulation (EC) No 2037/2000 of the European Parliament and of the Council of 29 June 2000 on substances that deplete the ozone layer (OJ L 244, 29.9.2000, p. 1). Regulation as amended by Regulation (EC) No 1804/2003 (OJ L 265, 16.10.2003, p. 1).
f Total mass of substances including their isomers listed in Group I and II of Annex I to Regulation (EC) No 2037/2000.
g Total mass of substances including their isomers listed in Group III and VI of Annex I to Regulation (EC) No 2037/2000.
h All metals shall be reported as the total mass of the element in all chemical forms present in the release.
i Halogenated organic compounds which can be adsorbed to activated carbon expressed as chloride.
j Expressed as I-TEQ.
l Single pollutants are to be reported if the threshold for BTEX (the sum parameter of benzene, toluene, ethyl benzene, xylenes) is exceeded.
k Total mass of the following brominated diphenylethers: penta-BDE, octa-BDE and deca-BDE.
m Total mass of phenol and simple substituted phenols expressed as total carbon.
n Polycyclic aromatic hydrocarbons (PAHs) are to be measured for reporting of releases to air as benzo(a)pyrene (50-32-8), benzo(b)fluoranthene (205-99-2), benzo(k)fluoranthene (207-08-9), indeno(1,2,3-cd)pyrene (193-39-5) (derived from Regulation (EC) No 850/2004 of the European Parliament and of the Council of 29 April 2004 on persistent organic pollutants (OJ L 229, 29.6.2004, p. 5)).
o Total mass of tributyltin compounds, expressed as mass of tributyltin.
p Total mass of triphenyltin compounds, expressed as mass of triphenyltin.
q Total mass of xylene (ortho-xylene, meta-xylene, para-xylene).
No	CAS number	Pollutanta	Threshold for releases(column 1)
			to air(column 1a)kg/year	to water(column 1b)kg/year	to land(column 1c)kg/year
1	74-82-8	Methane (CH4)	100 000	—b	—
2	630-08-0	Carbon monoxide (CO)	500 000	—	—
3	124-38-9	Carbon dioxide (CO2)	100 million	—	—
4		Hydro-fluorocarbons (HFCs)c	100	—	—
5	10024-97-2	Nitrous oxide (N2O)	10 000	—	—
6	7664-41-7	Ammonia (NH3)	10 000	—	—
7		Non-methane volatile organic compounds (NMVOC)	100 000	—	—
8		Nitrogen oxides (NOx/NO2)	100 000	—	—
9		Perfluorocarbons (PFCs)d	100	—	—
10	2551-62-4	Sulphur hexafluoride (SF6)	50	—	—
11		Sulphur oxides (SOx/SO2)	150 000	—	—
12		Total nitrogen	—	50 000	50 000
13		Total phosphorus	—	5 000	5 000
14		Hydrochlorofluorocarbons (HCFCs)e	1	—	—
15		Chlorofluorocarbons (CFCs)f	1	—	—
16		Halonsg	1	—	—
17		Arsenic and compounds (as As)h	20	5	5
18		Cadmium and compounds (as Cd)h	10	5	5
19		Chromium and compounds (as Cr)h	100	50	50
20		Copper and compounds (as Cu)h	100	50	50
21		Mercury and compounds (as Hg)h	10	1	1
22		Nickel and compounds (as Ni)h	50	20	20
23		Lead and compounds (as Pb)h	200	20	20
24		Zinc and compounds (as Zn)h	200	100	100
25	15972-60-8	Alachlor	—	1	1
26	309-00-2	Aldrin	1	1	1
27	1912-24-9	Atrazine	—	1	1
28	57-74-9	Chlordane	1	1	1
29	143-50-0	Chlordecone	1	1	1
30	470-90-6	Chlorfenvinphos	—	1	1
31	85535-84-8	Chloro-alkanes, C10-C13	—	1	1
32	2921-88-2	Chlorpyrifos	—	1	1
33	50-29-3	DDT	1	1	1
34	107-06-2	1,2-dichloroethane (EDC)	1 000	10	10
35	75-09-2	Dichloromethane (DCM)	1 000	10	10
36	60-57-1	Dieldrin	1	1	1
37	330-54-1	Diuron	—	1	1
38	115-29-7	Endosulphan	—	1	1
39	72-20-8	Endrin	1	1	1
40		Halogenated organic compounds (as AOX)i	—	1 000	1 000
41	76-44-8	Heptachlor	1	1	1
42	118-74-1	Hexachlorobenzene (HCB)	10	1	1
43	87-68-3	Hexachlorobutadiene (HCBD)	—	1	1
44	608-73-1	1,2,3,4,5,6-hexachlorocyclohexane(HCH)	10	1	1
45	58-89-9	Lindane	1	1	1
46	2385-85-5	Mirex	1	1	1
47		PCDD + PCDF (dioxins + furans) (as Teq)j	0,0001	0,0001	0,0001
48	608-93-5	Pentachlorobenzene	1	1	1
49	87-86-5	Pentachlorophenol (PCP)	10	1	1
50	1336-36-3	Polychlorinated biphenyls (PCBs)	0,1	0,1	0,1
51	122-34-9	Simazine	—	1	1
52	127-18-4	Tetrachloroethylene (PER)	2 000	10	—
53	56-23-5	Tetrachloromethane (TCM)	100	1	—
54	12002-48-1	Trichlorobenzenes (TCBs) (all isomers)	10	1	—
55	71-55-6	1,1,1-trichloroethane	100	—	—
56	79-34-5	1,1,2,2-tetrachloroethane	50	—	—
57	79-01-6	Trichloroethylene	2 000	10	—
58	67-66-3	Trichloromethane	500	10	—
59	8001-35-2	Toxaphene	1	1	1
60	75-01-4	Vinyl chloride	1 000	10	10
61	120-12-7	Anthracene	50	1	1
62	71-43-2	Benzene	1 000	200 (as BTEX)l	200 (as BTEX)l
63		Brominated diphenylethers (PBDE)k	—	1	1
64		Nonylphenol and Nonylphenol ethoxylates (NP/NPEs)	—	1	1
65	100-41-4	Ethyl benzene	—	200 (as BTEX)l	200 (as BTEX)l
66	75-21-8	Ethylene oxide	1 000	10	10
67	34123-59-6	Isoproturon	—	1	1
68	91-20-3	Naphthalene	100	10	10
69		Organotin compounds(as total Sn)	—	50	50
70	117-81-7	Di-(2-ethyl hexyl) phthalate (DEHP)	10	1	1
71	108-95-2	Phenols (as total C)m	—	20	20
72		Polycyclic aromatic hydrocarbons (PAHs)n	50	5	5
73	108-88-3	Toluene	—	200 (as BTEX)l	200 (as BTEX)l
74		Tributyltin and compoundso	—	1	1
75		Triphenyltin and compoundsp	—	1	1
76		Total organic carbon (TOC) (as total C or COD/3)	—	50 000	—
77	1582-09-8	Trifluralin	—	1	1
78	1330-20-7	Xylenesq	—	200 (as BTEX)l	200 (as BTEX)l
79		Chlorides (as total Cl)	—	2 million	2 million
80		Chlorine and inorganic compounds (as HCl)	10 000	—	—
81	1332-21-4	Asbestos	1	1	1
82		Cyanides (as total CN)	—	50	50
83		Fluorides (as total F)	—	2 000	2 000
84		Fluorine and inorganic compounds (as HF)	5 000	—	—
85	74-90-8	Hydrogen cyanide (HCN)	200	—	—
86		Particulate matter (PM10)	50 000	—	—
87	1806-26-4	Octylphenols and Octylphenol ethoxylates	—	1	—
88	206-44-0	Fluoranthene	—	1	—
89	465-73-6	Isodrin	—	1	—
90	36355-1-8	Hexabromobiphenyl	0,1	0,1	0,1
91	191-24-2	Benzo(g,h,i)perylene		1

ANNEX III U.K. Format for the reporting of release and transfer data by Member States to the Commission

a According to Article 3(1) of Directive 2000/60/EC of the European Parliament and of the Council of 23 October 2000 establishing a framework for Community action in the field of water policy (OJ L 327, 22.12.2000, p. 1). Directive as amended by Decision No 2455/2001/EC (OJ L 331, 15.12.2001, p. 1).
Reference year
Identification of the facility
Name of the parent company Name of the facility Identification number of facility Street address Town/village Postal code Country Coordinates of the location River basin districta NACE-code (4 digits) Main economic activity Production volume (optional) Number of installations (optional) Number of operating hours in year (optional) Number of employees (optional) Text field for textual information or website address delivered by facility or parent company (optional)
All Annex I activities of the facility (according to the coding system given in Annex I and the IPPC code where available)
Activity 1 (main Annex I activity) Activity 2 Activity N
Release data to air for the facility for each pollutant exceeding threshold value (according to Annex II)		Releases to air
Pollutant 1 Pollutant 2 Pollutant N	M: measured; Analytical Method used C: calculated; Calculation Method used E: estimated	T: Total in kg/year A: accidental in kg/year
Release data to water for the facility for each pollutant exceeding threshold value (according to Annex II)		Releases to water
Pollutant 1 Pollutant 2 Pollutant N	M: measured; Analytical Method used C: calculated; Calculation Method used E: estimated	T: Total in kg/year A: accidental in kg/year
Release data to land for the facility for each pollutant exceeding threshold value (according to Annex II)		Releases to land
Pollutant 1 Pollutant 2 Pollutant N	M: measured; Analytical Method used C: calculated; Calculation Method used E: estimated	T: Total in kg/year A: accidental in kg/year
Off-site transfer of each pollutant destined for waste-water treatment in quantities exceeding threshold value (according to Annex II)
Pollutant 1 Pollutant 2 Pollutant N	M: measured; Analytical Method used C: calculated; Calculation Method used E: estimated	in kg/year
Off-site transfers of hazardous waste for the facility exceeding threshold value (according to Article 5)
Within the country: For Recovery (R)	M: measured; Analytical Method used C: calculated; Calculation Method used E: estimated	in tonnes/year
Within the country: For Disposal (D)	M: measured; Analytical Method used C: calculated; Calculation Method used E: estimated	in tonnes/year
To other countries: For Recovery (R) Name of the recoverer Address of the recoverer Address of actual recovery site receiving the transfer	M: measured; Analytical Method used C: calculated; Calculation Method used E: estimated	in tonnes/year
To other countries: For Disposal (D) Name of the disposer Address of the disposer Address of actual disposal site receiving the transfer	M: measured; Analytical Method used C: calculated; Calculation Method used E: estimated	in tonnes/year
Off-site transfer of non-hazardous waste for the facility exceeding threshold value (according to Article 5)
For Recovery (R)	M: measured; Analytical Method used C: calculated; Calculation Method used E: estimated	in tonnes/year
For Disposal (D)	M: measured; Analytical Method used C: calculated; Calculation Method used E: estimated	in tonnes/year
Competent authority for requests of the public: Name Street address Town/village Telephone No Fax No E-mail address

(1)

Releases of pollutants falling into several categories of pollutants shall be reported for each of these categories.