Regulation (EC) No 78/2009 of the European Parliament and of the CouncilDangos y teitl llawn

ANNEX III [F1 GB type-approval] model certificates

Textual Amendments

F1 Words in Annex 3 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(6)(a)

Part 1 U.K.

[F1 GB type-approval] certificate relating to the type-approval of a vehicle with regard to pedestrian protection

Part 2 U.K.

[F1 GB type-approval] certificate relating to the type-approval of a vehicle with regard to it being fitted with a frontal protection system

Part 3 U.K.

[F1 GB type-approval] certificate relating to the type-approval of a frontal protection system to be supplied as a separate technical unit

PART 1 U.K. MODEL(maximum format: A4 (210 × 297 mm)) [F1 GB TYPE-APPROVAL] CERTIFICATE

Stamp of [F1 GB type-approval] authority U.K.

Communication concerning the: U.K.

• [F1 GB type-approval](1)

• extension of [F1 GB type-approval](1),

• refusal of [F1 GB type-approval](1),

• withdrawal of [F1 GB type-approval](1),

of a type of vehicle with regard to pedestrian protection

with regard to Regulation (EC) No 78/2009 of the European Parliament and of the Council of 14 January 2009 [F2 as it has effect in domestic law, as last amended by S.I. …./….]

Textual Amendments

F2 Words in Annex 3 Pt. 1 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(6)(b)

last amended by Regulation (EC) No …/…(2)

[F1 GB type-approval] No:

Reason for extension:

SECTION I U.K.

0.1. Make (trade name of manufacturer): U.K.

0.2.

Type: U.K.

0.2.1. Commercial name(s) (if available) U.K.

0.3.

Means of identification of type, if marked on the vehicle(3): U.K.

0.3.1. Location of that marking: U.K.

0.4. Category of vehicle M1 : U.K.

Marginal Citations

M1 As defined in [Article 4 of Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.] [Editorial Note: words in Annex 3 note substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(6)(c)]

0.5. Name and address of manufacturer: U.K.

0.8. Names and address(es) of assembly plant(s): U.K.

0.9. Name and address of the manufacturer’s representative (if any): U.K.

SECTION II U.K.

1. Additional information (where applicable) (see Addendum) U.K.

2. Technical service responsible for carrying out the tests: U.K.

3. Date of test report: U.K.

4. Number of test report: U.K.

5. Remarks (if any) (see Addendum): U.K.

6. Place: U.K.

7. Date: U.K.

8. Signature: U.K.

Attachments

:

Information package.

Test report.

Addendum to [F1 GB type-approval] certificate No … concerning the type-approval of a vehicle with regard to pedestrian protection with regard to Regulation (EC) No 78/2009

1.

Additional information U.K.

1.1. Brief description of the vehicle type as regards its structure, dimensions, lines and constituent materials: U.K.

1.2. Site of engine: forward/rear/central(4) U.K.

1.3. Drive: front-wheel/rear-wheel(4) U.K.

1.4. Mass of vehicle submitted for testing (as defined in accordance with point 1.7 of Annex I to Regulation (EC) No 78/2009): U.K.

• Front axle:

• Rear axle:

• Total:

1.5.

Test results according to the requirements of Annex I to Regulation (EC) No 78/2009: U.K.

1.5.1. Section 2 test results: U.K.

a According to the values specified in Section 2 of Annex I to Regulation (EC) No 78/2009.
b For monitoring purposes only.
Test	Value recorded			Pass/faila
Lower legform to bumper (where performed)	Bending angle	… …	degrees
	Shear displacement	… …	mm
	Acceleration at tibia	… …	g
Upper legform to bumper (where performed)	Sum of impact forces	… …	kN
	Bending moment	… …	Nm
Upper legform to bonnet leading edge	Sum of impact forces	… …	kN	b
	Bending moment	… …	Nm	b
Child/small adult headform (3,5 kg) to bonnet top	HPC values in Zone A (12 results M2 )
	HPC values in Zone B (6 results M2 )
Adult headform (4,8 kg) to windscreen	HPC values (5 results M2 )			b

Marginal Citations

M2 According to [Commission Regulation (EU) 631/2010]. [Editorial Note: words in Annex 3 Pt. 1 Addendum note substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(6)(e)]

1.5.2. Section 3 test results: U.K.

a According to the values specified in Section 3 of Annex I to Regulation (EC) No 78/2009.
b For monitoring purposes only.
Test	Value recorded			Pass/faila
Lower legform to bumper (where performed)	Bending angle	… …	degrees
	Shear displacement	… …	mm
	Acceleration at tibia	… …	g
Upper legform to bumper (where performed)	Sum of impact forces	… …	kN
	Bending moment	… …	Nm
Upper legform to bonnet leading edge	Sum of impact forces	… …	kN	b
	Bending moment	… …	Nm	b
Child/small adult headform (3,5 kg) to bonnet top	HPC values (9 results M2 )
Adult headform (4,5 kg) to windscreen	HPC values (9 results M2 )

Remarks: (e.g., valid for left-hand drive and right-hand drive vehicles)

1.5.3. Section 4 requirements: U.K.

a Provide details of system operation method.
b Provide details of testing completed to verify system.
Details of brake assist system supplieda.
Remarksb:

PART 2 U.K. MODEL(maximum format: A4 (210 × 297 mm)) [F1 GB TYPE-APPROVAL CERTIFICATE

Stamp of [F1 GB type-approval] authority U.K.

Communication concerning the: U.K.

• [F1 GB type-approval](1)

• extension of [F1 GB type-approval](1),

• refusal of [F1 GB type-approval](1),

• withdrawal of [F1 GB type-approval](1),

of a type of a vehicle with regard to it being fitted with a frontal protection system

with regard to Regulation (EC) No 78/2009 of the European Parliament and of the Council of 14 January 2009 [F3 as it has effect in domestic law, as last amended by S.I. …./….]

Textual Amendments

F3 Words in Annex 3 Pt. 2 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(6)(b)

last amended by Regulation (EC) No …/…(2)

[F1 GB type-approval] No:

Reason for extension:

SECTION I U.K.

0.1. Make (trade name of manufacturer): U.K.

0.2.

Type: U.K.

0.2.1. Commercial name(s) (if available): U.K.

0.3.

Means of identification of type, if marked on the vehicle(3): U.K.

0.3.1. Location of that marking: U.K.

0.4. Category of vehicle M1 : U.K.

0.5. Name and address of manufacturer: U.K.

0.7. Location and method of affixing of the [F1 GB type-approval]: U.K.

0.8. Address(es) of assembly plant(s): U.K.

0.9. Name and address of the manufacturer’s representative (if any): U.K.

SECTION II U.K.

1. Additional information (where applicable): See Addendum U.K.

2. Technical service responsible for carrying out the tests: U.K.

3. Date of test report: U.K.

4. Number of test report: U.K.

5. Remarks (if any): See Addendum U.K.

6. Place: U.K.

7. Date: U.K.

8. Signature: U.K.

Attachments

:

Information package.

Test report.

Addendum to [F1 GB type-approval] certificate No … concerning the type-approval of a vehicle with regard to it being fitted with a frontal protection system with regard to Regulation (EC) No 78/2009

1. Additional information, if any: U.K.

2. Remarks: U.K.

3. Test results according to the requirements of Section 5 of Annex I to Regulation (EC) No 78/2009 U.K.

Test	Value recorded			Pass/fail
Lower legform to frontal protection system — three test positions (where performed)	Bending angle	… …	degrees
	Shear displacement	… …	mm
	Acceleration at tibia	… …	g
Upper legform to frontal protection system — three test positions (where performed)	Sum of impact forces	… …	kN
	Bending moment	… …	Nm
Upper legform to frontal protection system leading edge — three test positions (monitoring only)	Sum of impact forces	… …	kN
	Bending moment		Nm
Child/small adult headform (3,5 kg) to frontal protection system	HPC values (at least three values)

PART 3 U.K. MODEL(maximum format: A4 (210 × 297 mm)) [F1 GB TYPE-APPROVAL] CERTIFICATE [F4 (SEPARATE TECHNICAL UNIT)]

Stamp of [F1 GB type-approval] authority U.K.

Communication concerning the: U.K.

• [F1 GB type-approval](1),

• extension of [F1 GB type-approval](1),

• refusal of [F1 GB type-approval](1),

• withdrawal of [F1 GB type-approval](1),

of a type of frontal protection system to be supplied as a separate technical unit

with regard to Regulation (EC) No 78/2009 of the European Parliament and of the Council of 14 January 2009 [F5 as it has effect in domestic law, as last amended by S.I. …./….]

Textual Amendments

F5 Words in Annex 3 Pt. 3 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(6)(b)

last amended by Regulation (EC) No …/…(2)

[F1 GB type-approval] No:

Reason for extension:

SECTION I U.K.

0.1. Make (trade name of manufacturer): U.K.

0.2. Type: U.K.

0.3.

Means of identification of type if marked on the frontal protection system(3): U.K.

0.3.1. Location of that marking: U.K.

0.5. Name and address of manufacturer: U.K.

0.7. Location and method of the affixing of the [F6 GB] approval mark: U.K.

Textual Amendments

F6 Word in Annex 3 Pt. 3 s. 1 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(6)(d)(ii)

0.8. Name(s) and address(es) of assembly plant(s): U.K.

0.9. Name and address of the manufacturer’s representative (if any): U.K.

SECTION II U.K.

1. Additional information: See Addendum U.K.

2. Technical service responsible for carrying out the tests: U.K.

3. Date of test report: U.K.

4. Number of test report: U.K.

5. Remarks (if any): See Addendum U.K.

6. Place: U.K.

7. Date: U.K.

8. Signature: U.K.

Attachments

:

Information package.

Test report.

Addendum to [F1 GB type-approval] certificate No … concerning the type-approval of a type of frontal protection system to be supplied as a separate technical unit with regard to Regulation (EC) No 78/2009

F7 1.

Additional information U.K.

1.1. Method of attachment: U.K.

1.2. Assembly and mounting instructions: U.K.

1.3. List of vehicles on which the frontal protection system may be fitted, any usage restrictions and necessary conditions for fitting: U.K.

…

Textual Amendments

F7 Annex 3 Pt. 3 s. 2: by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(6)(d)(iii) it is provided that in para. 1.5.1 note (c) after the table the words "Regulation (EU) 631/2020" are substituted (31.12.2022 at 11.00 p.m.) for "[implementing legislation]"

2. Remarks: U.K.

3. Test results according to the requirements of Section 5 of Annex I to Regulation (EC) No 78/2009 U.K.

Test	Value recorded			Pass/fail
Lower legform to frontal protection system — three test positions (where performed)	Bending angle	… …	degrees
	Shear displacement	… …	mm
	Acceleration at tibia	… …	g
Upper legform to frontal protection system — three test positions (where performed)	Sum of impact forces	… …	kN
	Bending moment	… …	Nm
Upper legform to frontal protection system leading edge — three test positions (monitoring only)	Sum of impact forces	… …	kN
	Bending moment		Nm
Child/small adult headform (3,5 kg) to frontal protection system	HPC values (at least three values)]

Textual Amendments

F4 Words in Annex 3 Pt. 3 heading inserted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 51(6)(d)(i)

(1)

Delete where not applicable.

(2)

Insert number of amending Regulation.

(3)

If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).

(4)

Delete where not applicable.