- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Council Regulation (EU) No 567/2010 of 29 June 2010 amending Regulation (EC) No 329/2007 concerning restrictive measures against the Democratic People’s Republic of Korea
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
EU_status_warning_original_version
This legislation may since have been updated - see the latest available (revised) version
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Articles 215(1) thereof,
Having regard to Common Position 2006/795/CFSP of 20 November 2006 concerning restrictive measures against the Democratic People’s Republic of Korea(1),
Having regard to the joint proposal from the High Representative of the Union for Foreign Affairs and Security Policy and the Commission,
Whereas:
(1) In line with Common Position 2006/795/CFSP, Regulation (EC) No 329/2007(2) in particular restricts the supply, sale, transfer or export to the Democratic People’s Republic of Korea (hereinafter referred to as ‘North Korea’) of certain items, materials, equipment, goods and technology, that could contribute to North Korea’s nuclear-related, other weapons of mass destruction-related or ballistic missiles-related programmes, in addition to those determined by the UN Security Council or the Sanctions Committee.
(2) These items are listed in Annex Ia to Regulation (EC) No 329/2007 and need to be revised in order to maintain their effectiveness.
(3) Regulation (EC) No 329/2007 should therefore be amended accordingly,
HAS ADOPTED THIS REGULATION:
Regulation (EC) No 329/2007 is hereby amended as follows:
Annex Ia to Regulation (EC) No 329/2007 is replaced with the text set out in the Annex to this Regulation.
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Luxembourg, 29 June 2010.
For the Council
The President
E. Espinosa
Other items, materials, equipment, goods and technology which could contribute to North Korea's nuclear-related, other weapons of mass destruction-related or ballistic missile-related programmes
N.B.: In judging whether the prohibited component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the prohibited component or components as the principal element of the goods being procured.
(To be read in conjunction with Part C.)
a Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established. | ||
No | Description | Related item from Annex I to Regulation (EC) No 428/2009 |
---|---|---|
I.A2.001 | Vibration test systems, equipment and components thereof, other than those specified in 2B116: a. Vibration test systems employing feedback or closed loop techniques and incorporating a digital controller, capable of vibrating a system at an acceleration equal to or greater than 0,1 g rms between 0,1 Hz and 2 kHz and imparting forces equal to or greater than 50 kN, measured “bare table”; b. Digital controllers, combined with specially designed vibration test “software”, with a “real-time control bandwidth” greater than 5 kHz designed for use with vibration test systems specified in a.; Technical note:“Real-time control bandwidth” is defined as the maximum rate at which a controller can execute complete cycles of sampling, processing data and transmitting control signals. c. Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force equal to or greater than 50 kN, measured “bare table”, and usable in vibration test systems specified in a.; d. Test piece support structures and electronic units designed to combine multiple shaker units in a system capable of providing an effective combined force equal to or greater than 50 kN, measured “bare table”, and usable in vibration systems specified in a. Technical note:“bare table” means a flat table, or surface, with no fixture or fittings. | 2B116 |
I.A2.002 | Machine tools, other than those specified in 2B001.c. or 2B201.b., for grinding having positioning accuracies with “all compensations available” equal to or less (better) than 15 μm according to ISO 230/2 (1988)a or national equivalents along any linear axis. | 2B001.c. 2B201.b. |
I.A2.002a | Components and numerical controls, specially designed for machine tools specified in 2B001, 2B201 or I.A2.002 above. | |
I.A2.003 | Balancing machines and related equipment as follows: a. Balancing machines, designed or modified for dental or other medical equipment, having all the following characteristics: 1. Not capable of balancing rotors/assemblies having a mass greater than 3 kg; 2. Capable of balancing rotors/assemblies at speeds greater than 12 500 rpm; 3. Capable of correcting unbalance in two planes or more; and 4. Capable of balancing to a residual specific unbalance of 0,2 g × mm per kg of rotor mass; b. “Indicator heads” designed or modified for use with machines specified in a. above. Technical note:“Indicator heads” are sometimes known as balancing instrumentation. | 2B119 |
I.A2.004 | Remote manipulators that can be used to provide remote actions in radiochemical separation operations or hot cells, other than those specified in 2B225, having either of the following characteristics: a. A capability of penetrating a hot cell wall of 0,3 m or more (through the wall operation); or b. A capability of bridging over the top of a hot cell wall with a thickness of 0,3 m or more (over the wall operation). Technical note:Remote manipulators provide translation of human operator actions to a remote operating arm and terminal fixture. They may be of master/slave type or operated by joystick or keypad. | 2B225 |
I.A2.005 | Controlled atmosphere heat treatment furnaces or oxidation furnaces capable of operation at temperatures above 400 °C. Note:This item does not cover tunnel kilns with roller or car conveyance, tunnel kilns with conveyor belt, pusher type kilns or shuttle kilns, specially designed for the production of glass, tableware ceramics or structural ceramics. | 2B226 2B227 |
I.A2.006 | Not used. | |
I.A2.007 | “Pressure transducers”, other than those defined in 2B230, capable of measuring absolute pressures at any point in the range 0 to 200 kPa and having both of the following characteristics: a. Pressure sensing elements made of or protected by “Materials resistant to corrosion by uranium hexafluoride (UF6)”; and b. Having either of the following characteristics: 1. A full scale of less than 200 kPa and an “accuracy” of better than ± 1 % of full scale; or 2. A full scale of 200 kPa or greater and an “accuracy” of better than 2 kPa. Technical note:For the purposes of 2B230 “accuracy” includes non-linearity, hysteresis and repeatability at ambient temperature. | 2B230 |
I.A2.008 | Liquid-liquid contacting equipment (mixer-settlers, pulsed columns, plate columns, centrifugal contactors); and liquid distributors, vapour distributors or liquid collectors designed for such equipment, where all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials: a. Alloys with more than 25 % nickel and 20 % chromium by weight; b. Fluoropolymers; c. Glass (including vitrified or enamelled coating or glass lining); d. Graphite or “carbon graphite”; e. Nickel or alloys with more than 40 % nickel by weight; f. Tantalum or tantalum alloys; g. Titanium or titanium alloys; h. Zirconium or zirconium alloys; or i. Stainless steel. Technical note:“Carbon graphite” is a composition consisting of amorphous carbon and graphite, in which the graphite content is 8 % or more by weight. | 2B350.e. |
I.A2.009 | Industrial equipment and components, other than those specified in 2B350.d., as follows: Heat exchangers or condensers with a heat transfer surface area greater than 0,05 m2, and less than 30 m2; and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the fluid(s) are made from any of the following materials: a. Alloys with more than 25 % nickel and 20 % chromium by weight; b. Fluoropolymers; c. Glass (including vitrified or enamelled coating or glass lining); d. Graphite or “carbon graphite”; e. Nickel or alloys with more than 40 % nickel by weight; f. Tantalum or tantalum alloys; g. Titanium or titanium alloys; h. Zirconium or zirconium alloys; i. Silicon carbide; j. Titanium carbide; or k. Stainless steel. Note:This item does not cover vehicle radiators. Technical note:The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the heat exchanger. | 2B350.d. |
I.A2.010 | Multiple-seal, and seal-less pumps, other than those specified in 2B350.i, suitable for corrosive fluids, or vacuum pumps and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials: a. Alloys with more than 25 % nickel and 20 % chromium by weight; b. Ceramics; c. Ferrosilicon; d. Fluoropolymers; e. Glass (including vitrified or enamelled coatings or glass lining); f. Graphite or “carbon graphite”; g. Nickel or alloys with more than 40 % nickel by weight; h. Tantalum or tantalum alloys; i. Titanium or titanium alloys; j. Zirconium or zirconium alloys; k. Niobium (columbium) or niobium alloys; l. Stainless steel; m. Aluminium alloys; or n. Rubber. Technical notes:The materials used for gaskets and seals and other implementations of sealing functions do not determine the status of control of the pump. The term “rubber” encompasses all kinds of natural and synthetic rubbers. | 2B350.i. |
I.A2.011 | “Centrifugal separators”, other than those specified in 2B352.c., capable of continuous separation without the propagation of aerosols and manufactured from: a. Alloys with more than 25 % nickel and 20 % chromium by weight; b. Fluoropolymers; c. Glass (including vitrified or enamelled coating or glass lining); d. Nickel or alloys with more than 40 % nickel by weight; e. Tantalum or tantalum alloys; f. Titanium or titanium alloys; or g. Zirconium or zirconium alloys. Technical note:“Centrifugal separators” include decanters. | 2B352.c. |
I.A2.012 | Sintered metal filters, other than those specified in 2B352.d., made of nickel or nickel alloy with more than 40 % nickel by weight. | 2B352.d. |
I.A2.013 | Spin-forming machines and flow-forming machines, other than those specified by 2B009, 2B109 or 2B209 and specially designed components therefor. Technical note:For the purpose of this item, machines combining the functions of spin-forming and flow-forming are regarded as flow-forming machines. | 2B009 2B109 2B209 |
I.A2.014 | Equipment and reagents, other than those specified in 2B350 or 2B352, as follows: a. Fermenters capable of cultivation of pathogenic “micro-organisms” or viruses, or capable of toxin production, without the propagation of aerosols, and having a total capacity of 10 l or more; b. Agitators for fermenters as mentioned in a.above; Technical Note:Fermenters include bioreactors, chemostats and continuous-flow systems. c. Laboratory equipment as follows: 1. Polymerase chain reaction (PCR)-equipment 2. Genetic sequencing equipment; 3. Genetic synthesizers; 4. Electroporation equipment; 5. Specific reagents associated with the equipment in I.A2.014.c. numbers 1. to 4. above; d. Filters, micro-filters, nano-filters or ultra-filters usable in industrial or laboratory biology for continuous filtering, except filters specially designed or modified for medical or clear water production purposes and to be used in the framework of EU or UN officially supported projects; e. Ultracentrifuges, rotors and adaptors for ultracentrifuges; f. Freeze drying equipment. | 2B350 2B352 |
I.A2.015 | Equipment, other than that specified in 2B005, 2B105 or 3B001.d., for the deposition of metallic overlays as follows, and specially designed components and accessories therefor: a. Chemical vapour deposition (CVD) production equipment; b. Physical vapour deposition (PVD) production equipment; c. Production equipment for deposition by means of inductive or resistance heating. | 2B005 2B105 3B001.d. |
I.A2.016 | Open tanks or containers, with or without agitators, with a total internal (geometric) volume greater than 0.5 m3 (500 litres), where all surfaces that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials: a. Alloys with more than 25 % nickel and 20 % chromium by weight; b. Fluoropolymers; c. Glass (including vitrified or enamelled coatings or glass lining); d. Nickel or alloys with more than 40 % nickel by weight; e. Tantalum or tantalum alloys; f. Titanium or titanium alloys; g. Zirconium or zirconium alloys; h. Niobium (columbium) or niobium alloys; i. Stainless steel; j. Wood; or k. Rubber. Technical note:The term “rubber” encompasses all kinds of natural and synthetic rubbers. | 2B350 |
No | Description | Related item from Annex I to Regulation (EC) No 428/2009 |
---|---|---|
I.B.001 | Software required for the development, production or use of the items in Part A. (Goods). |
No | Description | Related item from Annex I to Regulation (EC) No 428/2009 |
---|---|---|
I.C.001 | Technology required for the development, production or use of the items in Part A. (Goods).” |
Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items(OJ L 134, 29.5.2009, p. 1).
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys