Regulation (EU) 2016/1628 of the European Parliament and of the CouncilDangos y teitl llawn

CHAPTER VIII U.K. EXEMPTIONS

Article 34 U.K. General exemptions

1. Except as regards point (a) of Article 32(2), engines for export to third countries shall not be subject to this Regulation.

2. Except as regards point (b) of Article 32(2), engines for use by the armed forces shall not be subject to this Regulation.

For the purposes of this paragraph, fire services, civil defence services, forces responsible for maintaining public order and emergency medical services shall not be considered to be part of the armed forces.

3. Without prejudice to Article 32 and with the consent of the OEM, a manufacturer may deliver to that OEM an engine separately from its exhaust after-treatment system.

4. Notwithstanding Article 5(3), Member States shall authorise the temporary placing on the market, for the purposes of field testing, of engines that have not been EU type-approved in accordance with this Regulation.

5. Notwithstanding Articles 18(2) and 22(3), Member States shall grant EU type-approval for, and authorise the placing on the market of, engines that meet the gaseous and particulate pollutant emission limit values for special purpose engines set out in Annex VI, on the condition that the engines are intended for installation in non-road mobile machinery to be used in potentially explosive atmospheres, as defined in point (5) of Article 2 of Directive 2014/34/EU of the European Parliament and of the Council(1).

6. Notwithstanding Articles 18(2) and 22(3), Member States may, upon request, grant EU type-approval for, and authorise the placing on the market of, engines that meet the gaseous and particulate pollutant emission limit values for special purpose engines set out in Annex VI, on the condition that the engines are intended for installation in non-road mobile machinery that is exclusively used for the launch and recovery of lifeboats operated by a national rescue service.

7. Notwithstanding Articles 5(3) and 18(2), in relation to engines of categories RLL or RLR and placed on the Union market on or before 31 December 2011, Member States may authorise the placing on the market of replacement engines if the approval authority, upon examination, recognises and concludes that the installation of an engine that complies with the applicable emission limits set out in Tables II-7 and II-8 of Annex II will involve significant technical difficulties. In such a case, the replacement engines shall either comply with the emission limits that they would have needed to meet in order to be placed on the Union market on 31 December 2011, or shall comply with more stringent emission limits.

In respect of engines in categories RLL and RLR that were placed on the Union market after 31 December 2011, Member States may authorise the placing on the market of replacement engines complying with the emission limits that the engines to be replaced had to meet when they were originally placed on the Union market.

8. In respect of engines in categories RLL or RLR, Member States may authorise the placing on the market of engines that comply with the latest applicable emission limits defined in the relevant legislation applicable on 5 October 2016, provided that:

(a) those engines are part of a project which is at an advanced stage of development on 6 October 2016, as defined in Directive 2008/57/EC; and

(b) the use of engines that comply with the applicable emission limits set out in Tables II-7 or II-8 of Annex II will lead to disproportionate costs.

By 17 September 2017, each Member State shall communicate to the Commission the list of any such projects.

9. The Commission is empowered to adopt delegated acts in accordance with Article 55 for the purpose of supplementing this Regulation with the detailed technical specifications and conditions for:

(a) the delivery of an engine separately from its exhaust after-treatment system by a manufacturer to an OEM, as referred to in paragraph 3;

(b) the temporary placing on the market, for the purposes of field testing, of engines that have not been EU type-approved in accordance with this Regulation, as referred to in paragraph 4;

(c) granting the EU type-approval for, and authorising the placing on the market of, engines that meet the gaseous and particulate pollutant emission limit values for special purpose engines set out in Annex VI, as referred to in paragraphs 5 and 6.

Those delegated acts shall be adopted by 31 December 2016.

Article 35 U.K. Exemptions for new technologies or new concepts

1. A manufacturer may apply for an EU type-approval in respect of an engine type or engine family that incorporates new technologies or new concepts and that, as a result of those new technologies or new concepts, is incompatible with one or more requirements of this Regulation.

2. The approval authority shall grant the EU type-approval referred to in paragraph 1 where all of the following conditions are met:

(a) the application states the reasons why the new technologies or new concepts make the engine type or engine family incompatible with one or more of the requirements of this Regulation;

(b) the application describes the environmental implications of the new technologies or new concepts and the measures taken in order to ensure a level of environmental protection that is at least equivalent to the level provided by the requirements of this Regulation from which exemption is sought;

(c) test descriptions and results are presented which prove that the condition in point (b) is met.

3. The granting of the EU type-approval referred to in paragraph 1 shall be subject to authorisation by the Commission.

Where appropriate, the authorisation by the Commission shall specify whether it is subject to any restrictions.

The authorisation shall be given by means of an implementing act.

4. Pending the decision on authorisation by the Commission pursuant to paragraph 3, the approval authority may issue a provisional EU type-approval which shall be valid:

(a) only in the territory of that Member State;

(b) only in respect of an engine type or engine family covered by the exemption sought; and

(c) for at least 36 months.

Where a provisional EU type-approval is issued, the approval authority shall inform the Commission and the other Member States thereof without delay, by means of a file containing the information referred to in paragraph 2.

The provisional nature and the limited territorial validity of such a provisional EU type-approval shall be apparent from the heading of the EU type-approval certificate and the heading of the corresponding statement of conformity.

5. Where an approval authority decides to accept a provisional EU type-approval referred to in paragraph 4 within its territory, it shall inform the relevant approval authority and the Commission thereof in writing.

6. Where the Commission decides not to give the authorisation referred to in paragraph 3 the approval authority shall immediately notify the holder of the provisional EU type-approval referred to in paragraph 4 that the provisional EU type-approval will be revoked six months after the date of the Commission's refusal.

Notwithstanding the Commission's decision not to give the authorisation referred to in paragraph 3, engines manufactured in conformity with the provisional EU type-approval before it ceases to be valid may be placed on the market in any Member State the approval authorities of which accepted the provisional EU type-approval.

7. The requirements referred to in the second subparagraph of paragraph 4 and in paragraph 5 shall be deemed to be fulfilled where the relevant information has been uploaded onto IMI.

8. The Commission may adopt implementing acts laying down the authorisation referred to in paragraph 3 of this Article. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 56(2).

9. The Commission may adopt implementing acts laying down the harmonised templates for the EU type-approval certificate and the statement of conformity referred to in paragraph 4 of this Article, including their mandatory essential information. Those implementing acts shall be adopted, by 31 December 2016, in accordance with the examination procedure referred to in Article 56(2).

Article 36 U.K. Subsequent adaptation of delegated and implementing acts

1. Where the Commission authorises the granting of an exemption pursuant to Article 35, it shall immediately take the steps necessary to adapt the delegated or implementing acts concerned to technological developments.

Where the exemption authorised pursuant to Article 35 relates to a matter that is regulated by a UNECE regulation, the Commission shall propose an amendment to that regulation in accordance with the procedure applicable under the Revised 1958 Agreement.

2. As soon as the relevant delegated or implementing acts referred to in paragraph 1 have been amended, the Commission shall lift any restriction imposed by the decision authorising the exemption.

Where the steps necessary to adapt the delegated or implementing acts have not been taken, the Commission may, at the request of the Member State which granted the provisional EU type-approval, authorise that Member State to extend it by means of a decision in the form of an implementing act adopted in accordance with the examination procedure referred to in Article 56(2).

(1)

Directive 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (OJ L 96, 29.3.2014, p. 309).