- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Pwynt Penodol mewn Amser (31/01/2020)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Regulation (EU) 2016/426 of the European Parliament and of the Council of 9 March 2016 on appliances burning gaseous fuels and repealing Directive 2009/142/EC (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
There are outstanding changes not yet made to Regulation (EU) 2016/426 of the European Parliament and of the Council. Those changes will be listed when you open the content using the Table of Contents below. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
1.1. Appliances shall be so designed and constructed as to operate...
1.2. The manufacturer is under an obligation to analyse the risks...
1.3. In selecting the most appropriate solutions, the manufacturer shall apply...
1.4. When designing and constructing the appliance, and when drafting the...
1.6.1. The instructions for installation intended for the installer shall contain...
1.6.2. The instructions for use and servicing intended for the user...
1.6.3. The warning notices on the appliance and its packaging shall...
1.7. The instructions for incorporation of the fitting into an appliance...
3.1.1. Appliances shall be so designed and constructed that, when normally...
3.1.2. Condensation produced at the start-up and/or during use shall not...
3.1.3. Appliances shall be so designed and constructed as to minimise...
3.1.4. Appliances shall be so designed and constructed that water and...
3.1.5. In the event of a normal fluctuation of auxiliary energy,...
3.1.6. Abnormal fluctuation or failure of auxiliary energy or its restoration...
3.1.7. Appliances shall be so designed and constructed as to obviate...
3.1.8. Appliances shall be so designed and constructed as to obviate...
3.1.9. All pressurised parts of an appliance shall withstand the mechanical...
3.1.10. Appliances shall be so designed and constructed that failure of...
3.1.11. If an appliance is equipped with safety and controlling devices,...
3.1.12. All parts of appliances which are set or adjusted at...
3.1.13. Levers and other controlling and setting devices shall be clearly...
3.4.1. Appliances shall be so designed and constructed that, when normally...
3.4.2. Appliances shall be so designed and constructed that, when normally...
3.4.3. Appliances connected to a flue for the dispersal of combustion...
3.4.4. Appliances shall be so designed and constructed that, when normally...
3.7. Contact with food and water intended for human consumption
CONTENT OF THE MEMBER STATES COMMUNICATIONS OF THE GAS SUPPLY CONDITIONS
CONFORMITY ASSESSMENT PROCEDURES FOR APPLIANCES AND FITTINGS
1. MODULE B: EU TYPE-EXAMINATION — PRODUCTION TYPE
1.1. EU type-examination is the part of a conformity assessment procedure...
1.2. EU type-examination shall be carried out by assessment of the...
1.3. The manufacturer shall lodge an application for EU type-examination with...
1.5. The notified body shall draw up an evaluation report that...
1.6. Where the appliance or the fitting type meets the requirements...
1.7. The notified body shall keep itself apprised of any changes...
1.8. Each notified body shall inform its notifying authority concerning the...
1.9. The manufacturer shall keep a copy of the EU type-examination...
1.10. The manufacturer's authorised representative may lodge the application referred to...
2. MODULE C2: CONFORMITY TO TYPE BASED ON INTERNAL PRODUCTION CONTROL...
3. MODULE D: CONFORMITY TO TYPE BASED ON QUALITY ASSURANCE OF...
3.1. Conformity to type based on quality assurance of the production...
3.3.1. The manufacturer shall lodge an application for assessment of his...
3.3.2. The quality system shall ensure that the appliances or fittings...
3.3.3. The notified body shall assess the quality system to determine...
3.3.4. The manufacturer shall undertake to fulfil the obligations arising out...
3.3.5. The manufacturer shall keep the notified body that has approved...
3.4. Surveillance under the responsibility of the notified body
3.6. The manufacturer shall, for a period ending at least 10 years...
3.7. Each notified body shall inform its notifying authority of quality...
4. MODULE E: CONFORMITY TO TYPE BASED ON PRODUCT QUALITY ASSURANCE...
4.1. Conformity to type based on product quality assurance is that...
4.3.1. The manufacturer shall lodge an application for assessment of his...
4.3.2. The quality system shall ensure compliance of the appliances or...
4.3.3. The notified body shall assess the quality system to determine...
4.3.4. The manufacturer shall undertake to fulfil the obligations arising out...
4.3.5. The manufacturer shall keep the notified body that has approved...
4.4. Surveillance under the responsibility of the notified body
4.6. The manufacturer shall, for a period ending at least 10 years...
4.7. Each notified body shall inform its notifying authority of quality...
5. MODULE F: CONFORMITY TO TYPE BASED ON PRODUCT VERIFICATION
5.1. Conformity to type based on product verification is the part...
5.4. Verification of conformity by examination and testing of every appliance...
5.7. If the notified body agrees and under its responsibility, the...
EU DECLARATION OF CONFORMITY No …
1. Appliance or fitting /appliance or fitting model (product, type, batch...
2. Name and address of the manufacturer and, where applicable, his...
3. This declaration of conformity is issued under the sole responsibility...
4. Object of the declaration (identification of the appliance or fitting...
5. The object of the declaration described in point 4 is in...
6. References to the relevant harmonised standards used or references to...
7. The notified body … (name, address, number) … performed …...
8. In the case of fittings, instructions on how the fitting...
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys