Regulation (EU) 2017/1130 of the European Parliament and of the CouncilDangos y teitl llawn

Regulation (EU) 2017/1130 of the European Parliament and of the Council

of 14 June 2017

defining characteristics for fishing vessels

(recast)

THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 43(2) thereof,

Having regard to the proposal from the European Commission,

After transmission of the draft legislative act to the national parliaments,

Having regard to the opinion of the European Economic and Social Committee(1),

Acting in accordance with the ordinary legislative procedure(2),

Whereas:

(1) Council Regulation (EEC) No 2930/86(3) has been substantially amended(4). Since further amendments are to be made, that Regulation should be recast in the interests of clarity.

(2) In the framework of the Common Fisheries Policy, reference is made to the characteristics of fishing vessels, such as length, breadth, tonnage, date of entry into service and engine power.

(3) It is essential that identical rules for determining the characteristics of fishing vessels be used in order to unify the conditions for the pursuit of the activity in the Union. Those rules should be in line with the standards of the Common Fisheries Policy.

(4) The definitions laid down in this Regulation should be based upon initiatives already taken by specialist international organisations.

(5) Therefore, account should be taken of the United Nations Convention on Fishing and Conservation of the Living Resources of the High Seas, signed in Geneva on 29 April 1958, the International Convention on Tonnage Measurement of Ships, signed in London on 23 June 1969 (the ‘1969 Convention’) and the International Convention for the Safety of Fishing Vessels, signed in Torremolinos on 2 April 1977.

(6) For fishing vessels with a length overall of less than 15 metres, the methodology laid down in Annex I to the 1969 Convention is in certain cases inappropriate. Therefore, for those vessels a simpler definition of gross tonnage is desirable.

(7) The International Organisation for Standardisation (ISO) has drawn up standards on internal combustion engines which are widely applied in Member States.

(8) In order to adapt the reference to the relevant ISO International Standard setting out the requirements for the determination of the continuous engine power to technical progress, the power to adopt acts in accordance with Article 290 of the Treaty on the Functioning of the European Union should be delegated to the Commission in respect of the adoption of the necessary amendments to the reference to the relevant ISO International Standard. It is of particular importance that the Commission carry out appropriate consultations during its preparatory work, including at expert level, and that those consultations be conducted in accordance with the principles laid down in the Interinstitutional Agreement of 13 April 2016 on Better Law-Making(5). In particular, to ensure equal participation in the preparation of delegated acts, the European Parliament and the Council receive all documents at the same time as Member States' experts, and their experts systematically have access to meetings of Commission expert groups dealing with the preparation of delegated acts,

HAVE ADOPTED THIS REGULATION:

Article 1 U.K. General provision

The definitions of characteristics of fishing vessels laid down in this Regulation shall apply to all [F1 relevant retained direct EU legislation].

Textual Amendments

F1 Words in Art. 1 substituted (31.12.2020) by The Common Fisheries Policy (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/739), regs. 1, 32(2); 2020 c. 1, Sch. 5 para. 1(1)

Article 2 U.K. Length

1. The length of a vessel shall be the length overall, defined as the distance in a straight line between the foremost point of the bow and the aftermost point of the stern.

For the purposes of this definition:

(a) the bow shall be taken to include the watertight hull structure, forecastle, stem and forward bulwark, if fitted, but shall exclude bowsprits and safety rails;

(b) the stern shall be taken to include the watertight hull structure, transom, poop, trawl ramp and bulwark, but shall exclude safety rails, bumkins, propulsion machinery, rudders and steering gear, and divers' ladders and platforms.

The length overall shall be measured in metres with an accuracy of two decimals.

2. When the length between perpendiculars is referred to in [F2 relevant retained direct EU] legislation, it shall be defined as the distance measured between the forward and the after perpendiculars as defined by the International Convention for the Safety of Fishing Vessels.

The length between perpendiculars shall be measured in metres with an accuracy of two decimals.

Textual Amendments

F2 Words in Art. 2(2) substituted (31.12.2020) by The Common Fisheries Policy (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/739), regs. 1, 32(3); 2020 c. 1, Sch. 5 para. 1(1)

Article 3 U.K. Breadth

The breadth of a vessel shall be the maximum breadth as defined in Annex I to the International Convention on Tonnage Measurement of Ships (the ‘1969 Convention’).

The overall breadth shall be measured in metres with an accuracy of two decimals.

Article 4 U.K. Tonnage

1. The gross tonnage of fishing vessels with a length overall equal to, or greater than, 15 metres shall be measured as specified in Annex I to the 1969 Convention.

2. The gross tonnage of fishing vessels with a length overall of less than 15 metres shall be measured in accordance with the formula set out in Annex I to this Regulation.

3. When net tonnage is referred to in [F3 relevant retained direct EU legislation], it shall be defined as specified in Annex I to the 1969 Convention.

Textual Amendments

F3 Words in Art. 4(3) substituted (31.12.2020) by The Common Fisheries Policy (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/739), regs. 1, 32(4); 2020 c. 1, Sch. 5 para. 1(1)

Article 5 U.K. Engine power

1. The engine power shall be the total of the maximum continuous power which can be obtained at the flywheel of each engine and which can, by mechanical, electrical, hydraulic or other means, be applied to vessel propulsion. However, where a gearbox is incorporated into the engine, the power shall be measured at the gearbox output flange.

No deduction shall be made in respect of auxiliary machines driven by the engine.

The unit in which engine power is expressed shall be the kilowatt (kW).

2. The continuous engine power shall be determined in accordance with the requirements adopted by the International Organisation for Standardisation in its recommended International Standard ISO 3046/1, second edition, October 1981.

3. [F4 The Secretary of State may, by regulations, amend] paragraph 2 of this Article in order to adapt the reference to the relevant ISO International Standard to technical progress.

[F5 4. Regulations made by the Secretary of State under paragraph 3 are to be made by statutory instrument.

5. A statutory instrument containing regulations made by the Secretary of State under paragraph 3 is subject to annulment in pursuance of a resolution of either House of Parliament.

6. Before making any regulations under paragraph 3, the Secretary of State must consult—

(a) the Scottish Ministers;

(b) the Welsh Ministers;

(c) the Department of Agriculture, Environment and Rural Affairs in Northern Ireland; and

(d) such bodies or persons as appear to the Secretary of State to be representative of the interests likely to be substantially affected by the regulations and such other bodies or persons as the Secretary of State may consider appropriate.]

Textual Amendments

F4 Words in Art. 5(3) substituted (31.12.2020) by The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 40(2)(a); 2020 c. 1, Sch. 5 para. 1(1)

F5 Art. 5(4)-(6) inserted (31.12.2020) by The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 40(2)(b); 2020 c. 1, Sch. 5 para. 1(1)

Article 6 U.K. Date of entry into service

The date of entry into service shall be the date of the first issue of an official safety certificate.

Notwithstanding the first paragraph, the date of entry into service shall be the date of the first entry in an official register of fishing vessels:

(a)

if an official safety certificate is not issued; or

(b)

in the case of fishing vessels which entered into service before 1 December 1986.

F6 Article 7 U.K. Exercise of the delegation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F6 Art. 7 omitted (31.12.2020) by virtue of The Common Fisheries Policy (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/739), regs. 1, 32(5); 2020 c. 1, Sch. 5 para. 1(1)

Article 8 U.K. Repeal

Regulation (EEC) No 2930/86 is repealed.

References to the repealed Regulation shall be construed as references to this Regulation and shall be read in accordance with the correlation table set out in Annex III.

F7 Article 9 U.K. Final provisions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F7 Art. 9 omitted (31.12.2020) by virtue of The Common Fisheries Policy (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/739), regs. 1, 32(5); 2020 c. 1, Sch. 5 para. 1(1)

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Strasbourg, 14 June 2017.

For the European Parliament

The President

A. Tajani

For the Council

The President

H. Dalli

ANNEX I U.K.

NEW VESSELS WITH A LENGTH OVERALL OF LESS THAN 15 METRES U.K.

The gross tonnage of new fishing vessels with a length overall of less than 15 metres is defined as:

GT = K₁ · V

where: K₁ = 0,2 + 0,02 log₁₀ V

and V is the volume, given by:

V = a₁ (L_oa · B₁ · T₁)

where:

L_oa

=

length overall (Article 2 of this Regulation)

B₁

=

breadth in metres according to the 1969 Convention

T₁

=

depth in metres according to the 1969 Convention

a₁

=

a function of L_oa

VESSELS WITH A LENGTH OVERALL OF LESS THAN 15 METRES EXISTING ON 1 JANUARY 1995 U.K.

The gross tonnage of fishing vessels existing on 1 January 1995 with a length overall of less than 15 metres is defined as:

GT = K₁ · V

where V is volume, given by:

V = a₂ (L_oa · B₁ · T₁)

where:

L_oa

=

length overall (Article 2 of this Regulation)

B₁

=

breadth in metres according to the 1969 Convention

T₁

=

depth in metres according to the 1969 Convention

a₂

=

a function of L_oa

The functions a₁ and a₂ [F8 are] specified together with F9 ... detailed rules for the application of the formulae in [F10 Commission Decision 95/84/EC concerning the implementation of the Annex to Council Regulation (EEC) No. 2930/86 defining the characteristics of fishing vessels].

Textual Amendments

F8 Word in Annex 1 substituted (31.12.2020) by The Common Fisheries Policy (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/739), regs. 1, 32(6)(a); 2020 c. 1, Sch. 5 para. 1(1)

F9 Words in Annex 1 omitted (31.12.2020) by virtue of The Common Fisheries Policy (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/739), regs. 1, 32(6)(b); 2020 c. 1, Sch. 5 para. 1(1)

F10 Words in Annex 1 substituted (31.12.2020) by The Common Fisheries Policy (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/739), regs. 1, 32(6)(c); 2020 c. 1, Sch. 5 para. 1(1)

F11 ANNEX II U.K. REPEALED REGULATION WITH THE AMENDMENT THERETO

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F11 Annex 2 omitted (31.12.2020) by virtue of The Common Fisheries Policy (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/739), regs. 1, 32(7); 2020 c. 1, Sch. 5 para. 1(1)

ANNEX III U.K. CORRELATION TABLE

Regulation (EEC) No 2930/86	This Regulation
Article 1	Article 1
Article 2	Article 2
Article 3	Article 3
Article 4(1)(a)	—
Article 4(1)(b)	Article 4(1)
Article 4(1)(c)	Article 4(2)
Article 4(1)(d)	—
Article 4(1)(e)	—
Article 4(2)	Article 4(3)
Article 5	Article 5
Article 6	Article 6
—	Article 7
—	Article 8
Article 7(1)	Article 9
Article 7(2)	—
Annex	Annex I
—	Annex II
—	Annex III

(1)

OJ C 34, 2.2.2017, p. 140.

(2)

Position of the European Parliament of 4 April 2017 (not yet published in the Official Journal) and decision of the Council of 16 May 2017.

(3)

Council Regulation (EEC) No 2930/86 of 22 September 1986 defining characteristics for fishing vessels (OJ L 274, 25.9.1986, p. 1).

(4)

See Annex II.

(5)

OJ L 123, 12.5.2016, p. 1.