- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Commission Regulation (EU) 2018/1142 of 14 August 2018 amending Regulation (EU) No 1321/2014 as regards the introduction of certain categories of aircraft maintenance licences, the modification of the acceptance procedure of components from external suppliers and the modification of the maintenance training organisations' privileges (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 216/2008 of the European Parliament and of the Council of 20 February 2008 on common rules in the field of civil aviation and establishing a European Aviation Safety Agency, and repealing Council Directive 91/670/EEC, Regulation (EC) No 1592/2002 and Directive 2004/36/EC(1), and in particular Articles 5(5) and 6(3) thereof,
Whereas:
(1) Commission Regulation (EU) No 1321/2014(2) establishes the implementing rules on the continuing airworthiness of aircraft and aeronautical products, parts and appliances and on the approval of organisations and personnel involved in these tasks.
(2) In order to ensure a high uniform level of aviation safety, there is a need for a system, established at Union level, for the licencing of certifying staff involved in the maintenance of ELA1 aeroplanes and for aircraft other than aeroplanes and helicopters. That system should be simple and proportionate. Therefore, necessary measures should now be taken in order to set up such a system.
(3) The existing requirements related to a licence for certifying staff involved in the maintenance of avionics and electrical systems of aircraft other than those in the group of complex aircraft are not proportionate to the lower complexity of those aircraft, in particular because a significant amount of basic knowledge requirements are only relevant in relation to complex aircraft. A new licence for such staff should there be introduced. The requirements for that new licence should ensure that the level of safety is not reduced compared to the one achieved with the existing licence. The introduction of that new licence should reduce potential safety risks which could occur as a consequence of insufficient adequately qualified and licensed staff being available for the maintenance tasks concerned.
(4) During performance of maintenance, it is common that persons or organisations use components, parts or material provided by third parties. It is necessary to mitigate the risks associated to the acceptance of such components, parts or material and, in particular, to ensure that the persons and organisations concerned take the necessary measures to ensure proper acceptance, classification and segregation thereof.
(5) A significant number of fraud cases, showing a deliberate violation of the examination standards set in accordance with Regulation (EU) No 1321/2014, have been reported to the European Aviation Safety Agency (‘Agency’). Those cases related to basic knowledge examinations performed by approved maintenance training organisations for students who did not attend the basic training course. This situation has led to important safety concerns, in particular in light of the risk of licence holders releasing to service aircraft after maintenance without having the basic knowledge required. Measures should now be taken to address those safety concerns.
(6) Pursuant to Regulation (EU) No 1321/2014, operators of complex motor-powered aircraft, in commercial or non-commercial operations, are to ensure that the tasks associated with continuing airworthiness are performed by an approved continuing airworthiness management organisation and that the maintenance of the aircraft and components for installation thereon is performed by an approved maintenance organisation. However, in certain cases, such as in the non-commercial operation of lighter twin-turboprop aeroplanes, the compliance effort that is required from such operators is disproportionate to the benefits that implementing those requirements bring to the safety of their operations. The requirements applicable in those cases should therefore be adapted. Considering those disproportionate compliance efforts, the time needed to adapt those requirements and that not applying them in those cases until they have been adapted is not assessed to pose any significant risks to aviation safety, those requirements should cease to apply for the time being and apply only from an appropriate later date.
(7) Detailed rules regarding the use of Appendix VI of Annex III to Regulation (EU) No 1321/2014 were deleted by mistake when Regulation (EU) No 1321/2014 was amended by Regulation (EU) 2015/1536(3). That mistake should be corrected.
(8) Certain editorial errors leading to implementation difficulties have been identified in Annex Va to Regulation (EU) No 1321/2014. Those errors should be corrected.
(9) It is necessary to provide sufficient time to all parties concerned to adapt to the amended regulatory framework created as a consequence of the measures laid down in this Regulation. Those measures should therefore become applicable six months after the date of its entry into force. However, given their purpose and the absence of a need for any significant efforts to adapt by the parties concerned, certain measures should apply without delay. Certain other measures require more adaptation efforts and should therefore apply from an appropriate later date, however, because they entail the transition from regulation primarily under national law to the amended regulatory framework under Union law laid down in this Regulation.
(10) Regulation (EU) No 1321/2014 should therefore be amended accordingly.
(11) The measures provided for in this Regulation are in accordance with opinions of the Agency submitted pursuant to Article 19(1) of Regulation (EC) No 216/2008.
(12) The measures provided for in this Regulation are in accordance with the opinion of the Committee established by Article 65 of Regulation (EC) No 216/2008,
HAS ADOPTED THIS REGULATION:
Regulation (EU) No 1321/2014 is amended as follows:
in Article 5, paragraph 6 is replaced by the following:
‘6.Until specific requirements for certifying staff for components are added to this Regulation, the requirements laid down in the national laws in force in the relevant Member State shall continue to apply, except for maintenance organisations located outside the Union where the requirements shall be approved by the Agency.’;
Article 8 is amended as follows:
in paragraph 2, point (b) is deleted;
paragraph 5 is deleted;
the following paragraph 7 is inserted:
‘7.By way of derogation from paragraph 1, for aeroplanes of 5 700 kg MTOM and below which are equipped with multiple turboprop engines and which are not involved in commercial operations, points M.A.201(g)(2) and (g)(3) of Annex I (Part-M) shall apply from 1 January 2025.’;
Annex I (Part-M) is amended in accordance with Annex I to this Regulation;
Annex II (Part-145) is amended in accordance with Annex II to this Regulation;
Annex III (Part-66) is amended in accordance with Annex III to this Regulation;
Annex IV (Part-147) is amended in accordance with Annex IV to this Regulation;
Annex Va (Part-T) is amended in accordance with Annex V to this Regulation.
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
It shall apply from 5 March 2019.
However,
Article 1(2)(c), Article 1(7) and point (1) of Annex IV shall apply from 5 September 2018;
for the maintenance of ELA1 aeroplanes not involved in CAT operations and of aircraft other than aeroplanes and helicopters:
the requirement for the competent authority to issue aircraft maintenance licences in accordance with Annex III (Part-66), as new or as converted, pursuant to point 66.A.70 of that Annex, shall apply from 1 October 2019;
the requirement for certifying staff to be qualified in accordance with Annex III (Part-66) laid down in points M.A.606(g) and M.A.801(b)(2) of Annex I (Part-M) and in point 145.A.30(g) and (h) of Annex II (Part-145) shall apply from 1 October 2020.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 14 August 2018.
For the Commission
The President
Jean-Claude Juncker
Annex I is amended as follows:
the table of contents is amended as follows:
point M.A.501 is replaced by the following:
All components shall be classified into the following categories:
Components which are in a satisfactory condition, released on an EASA Form 1 or equivalent and marked in accordance with Subpart Q of Annex I (Part 21) to Regulation (EU) No 748/2012, unless otherwise specified in Annex I (Part 21) to Regulation (EU) No 748/2012 or in this Annex (Part-M).
Unserviceable components which shall be maintained in accordance with this Regulation.
Components categorised as unsalvageable because they have reached their certified life limit or contain a non-repairable defect.
Standard parts used on an aircraft, engine, propeller or other aircraft component when specified in the maintenance data and accompanied by evidence of conformity traceable to the applicable standard.
Material both raw and consumable used in the course of maintenance when the organisation is satisfied that the material meets the required specification and has appropriate traceability. All materials must be accompanied by documentation clearly relating to the particular material and containing a conformity to specification statement plus both the manufacturing and supplier source.
Components, standard parts and material shall only be installed on an aircraft or a component when they are in a satisfactory condition, belong to one of the categories listed in point (a) and the applicable maintenance data specifies the particular component, standard part or material.’;
in point M.A.502, point (d) is replaced by the following:
Maintenance other than overhaul of components, while the component is installed or temporarily removed from ELA1 aircraft not used in commercial air transport;
Overhaul of engines and propellers while installed or temporarily removed from CS-VLA, CS-22 and LSA aircraft not used in commercial air transport.
Component maintenance performed in accordance with point (d) is not eligible for the issuance of an EASA Form 1 and shall be subject to the aircraft release requirements provided for in point M.A.801.’;
point M.A.504 is replaced by the following:
Unserviceable and unsalvageable components shall be segregated from serviceable components, standards parts and materials.
Unsalvageable components shall not be permitted to re-enter the component supply system unless certified life limits have been extended or a repair solution has been approved in accordance with Regulation (EU) No 748/2012.’;
in point M.A.606, point (g) is replaced by the following:
Annex III (Part-66) in the case of aircraft;
Article 5(6) of this Regulation in the case of components.’;
in point M.A.608, point(c) is replaced by the following:
in Appendix VII, the first sentence is replaced by the following:
‘The following constitutes the complex maintenance tasks referred to in points M.A.801(b)2 and M.A.801(c)’.
Annex II is amended as follows:
the table of contents is amended as follows:
point 145.A.40 is replaced by the following:
‘145.A.40 Equipment and tools’;
point 145.A.42 is replaced by the following:
‘145.A.42 Components’;
in point 145.A.30, points (f), (g), (h) and (i) are replaced by the following:
The organisation shall ensure that personnel who carry out or control a continued-airworthiness non-destructive test of aircraft structures or components, or both, are appropriately qualified for the particular non-destructive test in accordance with the European or equivalent standard recognised by the Agency. Personnel who carry out any other specialised task shall be appropriately qualified in accordance with officially recognised standards. By derogation from this point, personnel referred to in point (g), points (h)(1) and (h)(2), qualified in category B1, B3 or L in accordance with Annex III (Part-66), may carry out and/or control colour contrast dye penetrant tests.
Any organisation maintaining aircraft, except where stated otherwise in point (j), shall in the case of aircraft line maintenance, have appropriate aircraft-rated certifying staff qualified as category B1, B2, B2L, B3 and L, as appropriate, in accordance with Annex III (Part-66) and point 145.A.35.
In addition such organisations may also use appropriately task-trained certifying staff holding the privileges set out in points 66.A.20(a)(1) and 66.A.20(a)(3)(ii) and qualified in accordance with Annex III (Part-66) and point 145.A.35 to carry out minor scheduled line maintenance and simple defect rectification. The availability of such certifying staff shall not replace the need for category B1, B2, B2L, B3 and L certifying staff, as appropriate.
Any organisation maintaining aircraft, except where stated otherwise in point (j), shall:
in the case of base maintenance of complex motor-powered aircraft, have appropriate aircraft-type-rated certifying staff, qualified as category C in accordance with Annex III (Part-66) and point 145.A.35. In addition, the organisation shall have sufficient aircraft-type-rated staff qualified as category B1 and B2, as appropriate, in accordance with Annex III (Part-66) and point 145.A.35 to support the category C certifying staff.
Category B1 and B2 support staff shall ensure that all relevant tasks or inspections have been carried out to the required standard before the category C certifying staff issues the certificate of release to service.
The organisation shall maintain a register of any such category B1 and B2 support staff.
The category C certifying staff shall ensure that compliance with point (i) has been met and that all work required by the customer has been accomplished during the particular base maintenance check or work package, and shall also assess the impact of any work not carried out, with a view to either requiring its accomplishment or agreeing with the operator to defer such work to another specified check or time limit.
in the case of base maintenance of aircraft other than complex motor-powered aircraft, have one of the following:
appropriate aircraft-rated certifying staff, qualified as category B1, B2, B2L, B3 and L, as appropriate, in accordance with Annex III (Part-66) and point 145.A.35;
appropriate aircraft-rated certifying staff, qualified in category C and assisted by support staff, as set out in point 145.A.35(a)(i).
Component certifying staff shall be qualified in accordance with Article 5(6) and point 145.A.35.’;
points 145.A.35(a) and (b) are replaced by the following:
In addition to the requirements of points 145.A.30(g) and (h), the organisation shall ensure that certifying staff and support staff have an adequate understanding of the relevant aircraft or components, or both, to be maintained and of the associated organisation procedures. In the case of certifying staff, this shall be accomplished before the issue or reissue of the certification authorisation.
‘Support staff’ means those staff holding an aircraft maintenance licence under Annex III (Part-66) in category B1, B2, B2L, B3 and/or L with the appropriate aircraft ratings, working in a base maintenance environment while not necessarily holding certification privileges.
‘Relevant aircraft and/or components’, means those aircraft or components specified in the particular certification authorisation.
‘Certification authorisation’ means the authorisation issued to certifying staff by the organisation and which specifies the fact that those staff may sign certificates of release to service within the limitations stated in such authorisation on behalf of the approved organisation.
Except for the cases listed in points 145.A.30(j) and 66.A.20(a)3(ii), the organisation may only issue a certification authorisation to certifying staff in relation to the basic categories or subcategories and, except for the category A licence, any type rating listed on the aircraft maintenance licence as required by Annex III (Part-66), subject to the licence remaining valid throughout the validity period of the authorisation and to the certifying staff remaining in compliance with Annex III (Part-66).’;
point 145.A.40 is amended as follows:
the title is replaced by the following:
‘145.A.40 Equipment and tools’;
point (a) is replaced by the following:
Where the manufacturer specifies a particular tool or equipment, the organisation shall use that tool or equipment, unless the use of alternative tooling or equipment is agreed by the competent authority via procedures specified in the exposition.
Equipment and tools must be permanently available, except in the case of any tool or equipment that is so infrequently used that its permanent availability is not necessary. Such cases shall be detailed in an exposition procedure.
An organisation approved for base maintenance shall have sufficient aircraft access equipment and inspection platforms/docking as required for the proper inspection of the aircraft.’;
point 145.A.42 is replaced by the following:
Classification of components. All components shall be classified into the following categories:
Components which are in a satisfactory condition, released on an EASA Form 1 or equivalent and marked in accordance with Subpart Q of the Annex I (Part 21) to Regulation (EU) No 748/2012, unless otherwise specified in Annex I (Part 21) to Regulation (EU) No 748/2012 or in this Annex II (Part 145).
Unserviceable components which shall be maintained in accordance with this Regulation.
Components categorised as unsalvageable because they have reached their certified life limit or contain a non-repairable defect.
Standard parts used on an aircraft, engine, propeller or other aircraft component when specified in the maintenance data and accompanied by evidence of conformity traceable to the applicable standard.
Material, both raw and consumable, used in the course of maintenance when the organisation is satisfied that the material meets the required specification and has appropriate traceability. All material shall be accompanied by documentation clearly relating to the particular material and containing a conformity to specification statement as well as the manufacturing and supplier source.
Components, standard parts and materials for installation
The organisation shall establish procedures for the acceptance of components, standard parts and materials for installation to ensure that components, standard parts and materials are in satisfactory condition and meet the applicable requirements of point (a).
The organisation shall establish procedures to ensure that components, standard parts and materials shall only be installed on an aircraft or a component when they are in satisfactory condition, meet the applicable requirements of point (a) and the applicable maintenance data specifies the particular component, standard part or material.
The organisation may fabricate a restricted range of parts to be used in the course of undergoing work within its own facilities, provided procedures are identified in the exposition.
Components referred to in point 21.A.307(c) of the Annex I (Part 21) to Regulation (EU) No 748/2012 shall only be installed if considered eligible for installation by the aircraft owner on its own aircraft.
Segregation of components
Unserviceable and unsalvageable components shall be segregated from serviceable components, standards parts and materials.
Unsalvageable components shall not be permitted to re-enter the component supply system, unless certified life limits have been extended or a repair solution has been approved in accordance with Regulation (EU) No 748/2012.’.
Annex III is amended as follows:
in the table of contents the following references to Appendixes VII and VIII are added:
‘Appendix VII — Basic knowledge requirements for category L aircraft maintenance licence
Appendix VIII — Basic examination standards for category L aircraft maintenance licence’;
point 66.A.3 is replaced by the following:
Aircraft maintenance licences include the following categories and, where applicable, subcategories and system ratings:
Category A, divided into the following subcategories:
A1 Aeroplanes Turbine;
A2 Aeroplanes Piston;
A3 Helicopters Turbine;
A4 Helicopters Piston.
Category B1, divided into the following subcategories:
B1.1 Aeroplanes Turbine;
B1.2 Aeroplanes Piston;
B1.3 Helicopters Turbine;
B1.4 Helicopters Piston.
Category B2
The B2 licence is applicable to all aircraft.
Category B2L
The B2L licence is applicable to all aircraft other than those in Group 1 as set out in Point 66.A.5(1) and is divided into the following ‘system ratings’:
communication/navigation (com/nav),
instruments,
autoflight,
surveillance,
airframe systems.
A B2L licence shall contain, as a minimum, one system rating.
Category B3
The B3 licence is applicable to piston-engine non-pressurised aeroplanes of 2 000 kg Maximum Take-off Mass (MTOM) and below.
Category L, divided into the following subcategories:
L1C: composite sailplanes,
L1: sailplanes,
L2C: composite powered sailplanes and composite ELA1 aeroplanes,
L2: powered sailplanes and ELA1 aeroplanes,
L3H: hot-air balloons,
L3G: gas balloons,
L4H: hot-air airships,
L4G: ELA2 gas airships,
L5: gas airships other than ELA2.
Category C
The C licence is applicable to aeroplanes and helicopters.’;
point 66.A.5 is replaced by the following:
For the purpose of ratings on aircraft maintenance licences, aircraft shall be classified into the following groups:
Group 1: complex motor-powered aircraft, helicopters with multiple engines, aeroplanes with maximum certified operating altitude exceeding FL290, aircraft equipped with fly-by-wire systems, gas airships other than ELA2 and other aircraft requiring an aircraft type rating when defined as such by the Agency.
The Agency may decide to classify into Group 2, Group 3 or Group 4, as appropriate, an aircraft which meets the conditions set out in the first subparagraph, if it considers that the lower complexity of the particular aircraft justifies so.
Group 2: aircraft other than those in Group 1 belonging to the following subgroups:
subgroup 2a:
single turboprop engine aeroplanes,
those turbojet and multiple-turboprop aeroplanes classified by the Agency in this subgroup because of their lower complexity.
subgroup 2b:
single turbine engine helicopters,
those multiple turbine engine helicopters classified by the Agency in this subgroup because of their lower complexity.
subgroup 2c:
single piston engine helicopters,
those multiple piston engine helicopters classified by the Agency in this subgroup because of their lower complexity.
Group 3: piston engine aeroplanes other than those in Group 1.
Group 4: sailplanes, powered sailplanes, balloons and airships, other than those in Group 1.’;
point 66.A.20(a) is amended as follows:
points (4) and (5) are replaced by the following:
maintenance performed on electrical systems;
maintenance performed on avionics systems within the limits of the system ratings specifically endorsed on the licence, and
when holding the ‘airframe system’ rating, performance of electrical and avionics tasks within power plant and mechanical systems, requiring only simple tests to prove their serviceability.
maintenance performed on aeroplane structure, power plant and mechanical and electrical systems; and
work on avionics systems requiring only simple tests to prove their serviceability and not requiring troubleshooting.’;
the following points (6) and (7) are added:
maintenance performed on aircraft structure, power plant and mechanical and electrical systems;
work on radio, Emergency Locator Transmitters (ELT) and transponder systems; and
work on other avionics systems requiring simple tests to prove their serviceability.
Subcategory L2 includes subcategory L1. Any limitation to subcategory L2 in accordance with point 66.A.45(h) becomes also applicable to subcategory L1.
Subcategory L2C includes subcategory L1C.
in Point 66.A.25, point (a) is replaced by the following:
point 66.A.25 is amended as follows:
points (b) and (c) are replaced by the following:
An applicant for an aircraft maintenance licence in category L within a given subcategory, or for the addition of a different subcategory, shall demonstrate by examination a level of knowledge of the appropriate subject modules in accordance with Appendix VII to Annex III (Part-66). The examination shall comply with the standard set out in Appendix VIII to Annex III (Part-66) and shall be conducted by a training organisation appropriately approved in accordance with Annex IV (Part-147), by the competent authority or as agreed by the competent authority.
The holder of an aircraft maintenance licence in subcategory B1.2 or category B3 is deemed to meet the basic knowledge requirements for a licence in subcategories L1C, L1, L2C and L2.
The basic knowledge requirements for subcategory L4H include the basic knowledge requirements for subcategory L3H.
The basic knowledge requirements for subcategory L4G include the basic knowledge requirements for subcategory L3G.
An applicant for an aircraft maintenance licence in category B2L for a particular ‘system rating’, or for the addition of another ‘system rating’, shall demonstrate by examination a level of knowledge of the appropriate subject modules in accordance with Appendix I to Annex III (Part-66). The examination shall comply with the standard set out in Appendix II to Annex III (Part-66) and shall be conducted either by a training organisation appropriately approved in accordance with Annex IV (Part-147), or by the competent authority.’
the following points (d), (e) and (f) are added:
The training courses and examinations shall have been passed within 10 years prior to the application for an aircraft maintenance licence or the addition of a category or subcategory to such a licence. Should this not be the case, examination credits may be obtained in accordance with point (e).
The applicant may apply to the competent authority for full or partial examination credits for the basic knowledge requirements for:
basic knowledge examinations that do not meet the requirement laid down in point (d);
any other technical qualification considered by the competent authority to be equivalent to the knowledge standard of Annex III (Part-66).
Credits shall be granted in accordance with Subpart E of Section B of this Annex (Part-66).
Credits expire 10 years after they were granted to the applicant by the competent authority. The applicant may apply for new credits after expiration.’;
in point 66.A.30(a) the following points (2a) and (2b) are inserted:
for category B2L:
3 years of practical maintenance experience in operating aircraft, covering the corresponding system rating(s), if the applicant has no previous relevant technical training; or
2 years of practical maintenance experience in operating aircraft, covering the corresponding system rating(s), and completion of training, considered relevant by the competent authority, as a skilled worker in a technical trade; or
1 year of practical maintenance experience in operating aircraft, covering the corresponding system rating(s), and completion of a Part-147 approved basic training course.
For the addition of (a) new system rating(s) to an existing B2L licence, 3 months of practical maintenance experience relevant to the new system rating(s) shall be required for each system rating added.
for category L:
2 years of practical maintenance experience in operating aircraft covering a representative cross section of maintenance activities in the corresponding subcategory;
as a derogation from point (i), 1 year of practical maintenance experience in operating aircraft covering a representative cross section of maintenance activities in the corresponding subcategory, subject to the introduction of the limitation provided for in point 66.A.45(h)(ii)(3).
For the inclusion of an additional subcategory in an existing L licence, the experience required by points (i) and (ii) shall be 12 and 6 months respectively.
The holder of an aircraft maintenance licence in category/subcategory B1.2 or B3 is deemed to meet the basic experience requirements for a licence in subcategories L1C, L1, L2C and L2.’;
point 66.A.45 is replaced by the following:
In order to be entitled to exercise certification privileges on a specific aircraft type, the holder of an aircraft maintenance licence needs to have their licence endorsed with the relevant aircraft ratings:
For category B1, B2 or C, the relevant aircraft ratings are the following:
for Group 1 aircraft, the appropriate aircraft type rating;
for Group 2 aircraft, the appropriate aircraft type rating, manufacturer subgroup rating or full subgroup rating;
for Group 3 aircraft, the appropriate aircraft type rating or full group rating;
for Group 4 aircraft, for the category B2 licence, the full group rating.
For category B2L, the relevant aircraft ratings are the following:
for Group 2 aircraft, the appropriate manufacturer subgroup rating or full subgroup rating;
for Group 3 aircraft, the full group rating;
for Group 4 aircraft, the full group rating.
For category B3, the relevant rating is ‘piston-engine non-pressurised aeroplanes of 2 000 kg MTOM and below’.
For category L, the relevant aircraft ratings are the following:
for subcategory L1C, the rating ‘composite sailplanes’;
for subcategory L1, the rating ‘sailplanes’;
for subcategory L2C, the rating ‘composite powered sailplanes and composite ELA1 aeroplanes’;
for subcategory L2, the rating ‘powered sailplanes and ELA1 aeroplanes’;
for subcategory L3H, the rating ‘hot-air balloons’;
for subcategory L3G, the rating ‘gas balloons’;
for subcategory L4H, the rating ‘hot-air airships’;
for subcategory L4G, the rating ‘ELA2 gas airships’;
for subcategory L5, the appropriate airship type rating.
For category A, no rating is required, subject to compliance with the requirements of point 145.A.35 of Annex II (Part-145).
The endorsement of aircraft type ratings requires the satisfactory completion of one of the following:
the relevant category B1, B2 or C aircraft type training in accordance with Appendix III to Annex III (Part-66);
in the case of gas airship type ratings on a B2 or L5 licence, a type training approved by the competent authority in accordance with point 66.B.130.
For other than category C licences, in addition to the requirements of point (b), the endorsement of the first aircraft type rating within a given category/subcategory requires satisfactory completion of the corresponding on-the-job training. This on-the-job training shall comply with Appendix III to Annex III (Part-66), except in the case of gas airships, where it shall be directly approved by the competent authority.
By derogation from points (b) and (c), for Group 2 and 3 aircraft, aircraft type ratings may also be endorsed on a licence after:
satisfactory completion of the relevant category B1, B2 or C aircraft type examination in accordance with Appendix III to this Annex (Part-66);
in the case of B1 and B2 category, demonstration of practical experience in the aircraft type. In that case, the practical experience shall include a representative cross section of maintenance activities relevant to the licence category.
In the case of a category C rating, for a person qualified by holding an academic degree as specified in point 66.A.30(a)(7), the first relevant aircraft type examination shall be at the category B1 or B2 level.
For Group 2 aircraft:
the endorsement of manufacturer subgroup ratings for category B1 and C licence holders requires complying with the aircraft type rating requirements for at least two aircraft types from the same manufacturer, which combined are representative of the applicable manufacturer subgroup;
the endorsement of full subgroup ratings for category B1 and C licence holders requires complying with the aircraft type rating requirements for at least three aircraft types from different manufacturers, which combined are representative of the applicable subgroup;
the endorsement of manufacturer subgroup and full subgroup ratings for category B2 and B2L licence holders requires demonstration of practical experience which shall include a representative cross section of maintenance activities relevant to the licence category and to the applicable aircraft subgroup and, in the case of the B2L licence, relevant to the applicable system rating(s);
by derogation from point (e)(iii), the holder of a B2 or B2L licence, endorsed with a full subgroup 2b, is entitled to be endorsed with a full subgroup 2c.
For Group 3 and 4 aircraft:
the endorsement of the full Group 3 rating for category B1, B2, B2L and C licence holders and the endorsement of the full Group 4 rating for B2 and B2L licence holders require demonstration of practical experience, which shall include a representative cross section of maintenance activities relevant to the licence category and to Group 3 or 4, as applicable;
for category B1, unless the applicant provides evidence of appropriate experience, Group 3 rating shall be subject to the following limitations, which shall be endorsed on the licence:
pressurised aeroplanes,
metal-structure aeroplanes,
composite-structure aeroplanes,
wooden-structure aeroplanes,
aeroplanes with metal-tubing structure covered with fabric;
by derogation from point (f)(i), the holder of a B2L licence, endorsed with a full subgroup 2a or 2b, is entitled to be endorsed with Groups 3 and 4.
For the B3 licence:
the endorsement of the rating ‘piston engine non-pressurised aeroplanes of 2 000 kg MTOM and below’ requires demonstration of practical experience, which shall include a representative cross section of maintenance activities relevant to the licence category;
unless the applicant provides evidence of appropriate experience, the rating referred to in point (i) shall be subject to the following limitations, which shall be endorsed on the licence:
wooden-structure aeroplanes,
aeroplanes with metal-tubing structure covered with fabric,
metal-structure aeroplanes,
composite-structure aeroplanes.
For all L licence subcategories, other than L5:
the endorsement of ratings requires demonstration of practical experience which shall include a representative cross section of maintenance activities relevant to the licence subcategory;
unless the applicant provides evidence of appropriate experience, the ratings shall be subject to the following limitations, which shall be endorsed on the licence:
for ratings ‘sailplanes’ and ‘powered sailplanes and ELA1 aeroplanes’:
wooden-structure aircraft covered with fabric,
aircraft with metal-tubing structure covered with fabric,
metal-structure aircraft,
composite-structure aircraft,
for the rating ‘gas balloons’:
other than ELA1 gas balloons; and
if the applicant has only provided evidence of one-year experience in accordance with the derogation contained in point 66.A.30(a)(2b)(ii), the following limitation shall be endorsed on the licence:
complex maintenance tasks provided for in Appendix VII to Annex I (Part-M), standard changes provided for in point 21.A.90B of Annex I (Part-21) to Regulation (EU) No 748/2012 and standard repairs provided for in point 21.A.431B of Annex I (Part-21) to Regulation (EU) No 748/2012.’
The holder of an aircraft maintenance licence in subcategory B1.2 endorsed with the Group 3 rating, or in category B3 endorsed with the rating ‘piston engine non-pressurised aeroplanes of 2 000 kg MTOM and below’, is deemed to meet the requirements for the issuance of a licence in subcategories L1 and L2 with the corresponding full ratings and with the same limitations as the B1.2/B3 licence held.’;
in point 66.A.50, point (a) is replaced by the following:
in point 66.A.70, points (c) and (d) are replaced by the following:
Where necessary, the aircraft maintenance licence shall contain limitations in accordance with point 66.A.50 to reflect the differences between:
the scope of the certifying staff qualification valid in the Member State before the entry into force of the applicable licence category or subcategory provided for in this Annex (Part-66);
the basic knowledge requirements and the basic examination standards laid down in Appendices I and II to this Annex (Part-66).
By derogation from point (c), for aircraft not used by licenced air carriers in accordance with Regulation (EC) No 1008/2008, other than complex motor-powered aircraft, and for balloons, sailplanes, motor-powered sailplanes and airships, the aircraft maintenance licence shall contain limitations in accordance with point 66.A.50 to ensure that the certifying staff privileges valid in the Member State before the entry into force of the applicable Part-66 licence category/subcategory and those of the converted Part-66 aircraft maintenance licence remain the same.’;
point 66.B.100(b) is replaced by the following:
point 66.B.110 is replaced by the following:
At the completion of the procedures specified in points 66.B.100 or 66.B.105, the competent authority shall endorse the additional basic category, subcategory or, for category B2L, system rating(s) on the aircraft maintenance licence by stamp and signature or shall reissue the licence.
The record system of the competent authority shall be changed accordingly.
Upon request by the applicant, the competent authority shall replace a licence in category B2L with a licence in category B2 endorsed with the same aircraft rating(s) when the holder has demonstrated both of the following:
by examination the differences between the basic knowledge corresponding to the B2L licence held and the basic knowledge of the B2 licence, as set out in Appendix I;
the practical experience required in Appendix IV.
In the case of a holder of an aircraft maintenance licence in subcategory B1.2 endorsed with the Group 3 rating or in category B3 endorsed with the rating ‘piston engine non-pressurised aeroplanes of 2 000 kg MTOM and below’, the competent authority shall issue, upon application, a fully rated licence in subcategories L1 and L2, with the same limitations as the B1.2/B3 licence held.’;
in point 66.B.115, point (f) is replaced by the following:
by the provision of detailed practical training records or a logbook provided by the organisation which delivered the course directly approved by the competent authority in accordance with point 66.B.130;
where available, by a training certificate, covering the practical training element, issued by a maintenance training organisation appropriately approved in accordance with Annex IV (Part-147).’;
in point 66.B.125 point (b), point (1) is replaced by the following:
helicopter piston engine, full group: converted to ‘full subgroup 2c’ plus the aircraft type ratings for those single piston engine helicopters which are in Group 1;
helicopter piston engine, manufacturer group: converted to the corresponding ‘manufacturer subgroup 2c’ plus the aircraft type ratings for those single piston engine helicopters of that manufacturer which are in Group 1;
helicopter turbine engine, full group: converted to ‘full subgroup 2b’ plus the aircraft type ratings for those single turbine engine helicopters which are in Group 1;
helicopter turbine engine, manufacturer group: converted to the corresponding ‘manufacturer subgroup 2b’ plus the aircraft type ratings for those single turbine engine helicopters of that manufacturer which are in Group 1;
aeroplane single piston engine — metal structure, either full group or manufacturer group: converted to ‘full group 3’. For the B1 licence, the following limitations shall be included: composite-structure aeroplanes, wooden-structure aeroplanes, and metal-tubing and fabric aeroplanes;
aeroplane multiple piston engines — metal structure, either full group or manufacturer group: converted to ‘full group 3’ plus the aircraft type ratings for those aeroplanes with multiple piston engines of the corresponding full/manufacturer group which are in Group 1. For the B1 licence, the following limitations shall be included: composite-structure aeroplanes, wooden-structure aeroplanes and metal-tubing and fabric aeroplanes;
aeroplane single piston engine — wooden structure, either full group or manufacturer group: converted to ‘full group 3’. For the B1 licence, the following limitations shall be included: pressurised aeroplanes, metal-structure aeroplanes, composite-structure aeroplanes and metal-tubing and fabric aeroplanes;
aeroplane multiple piston engines — wooden structure, either full group or manufacturer group: converted to ‘full group 3’. For the B1 licence, the following limitations shall be included: pressurised aeroplanes, metal-structure aeroplanes, composite-structure aeroplanes and metal-tubing and fabric aeroplanes;
aeroplane single piston engine — composite structure, either full group or manufacturer group: converted to ‘full group 3’. For the B1 licence, the following limitations shall be included: pressurised aeroplanes, metal-structure aeroplanes, wooden-structure aeroplanes and metal-tubing and fabric aeroplanes;
aeroplane multiple piston engines — composite structure, either full group or manufacturer group: converted to ‘full group 3’. For the B1 licence, the following limitations shall be included: pressurised aeroplanes, metal-structure aeroplanes, wooden-structure aeroplanes and metal-tubing and fabric aeroplanes;
aeroplane turbine — single engine, full group: converted to ‘full sub-group 2a’ plus the aircraft type ratings for those single turboprop aeroplanes which did not require an aircraft type rating in the previous system and are in Group 1;
aeroplane turbine — single engine, manufacturer group: converted to the corresponding ‘manufacturer subgroup 2a’ plus the aircraft type ratings for those single turboprop aeroplanes of that manufacturer which did not require an aircraft type rating in the previous system and are in Group 1;
aeroplane turbine — multiple engines, full group: converted to the aircraft type ratings for those aeroplanes with multiple turboprop engines which did not require an aircraft type rating in the previous system.’;
point 66.B.130 is replaced by the following:
In the case of type training for aircraft other than airships, the competent authority may approve aircraft type training not conducted by a maintenance training organisation approved in accordance with Annex IV (Part-147), pursuant to point 1 of Appendix III to this Annex (Part-66). In such case, the competent authority shall have a procedure to ensure that the aircraft type training complies with Appendix III to this Annex (Part-66).
In the case of type training for airships in Group 1, the courses shall be directly approved by the competent authority in all cases. The competent authority shall have a procedure to ensure that the syllabus of the airship-type training covers all the elements contained in the maintenance data from the Design Approval Holder (DAH).’;
in point 66.B.200, point (c) is replaced by the following:
in point 66.B.305(b), the word ‘Appendix III’ is replaced by the word ‘Appendix I’;
point 66.B.405 is replaced by the following:
The credit report shall include a comparison between the following:
the modules, submodules, subjects and knowledge levels contained in Appendices I or VII to this Annex (Part-66), as applicable;
the syllabus of the technical qualification concerned, relevant to the particular category being sought.
This comparison shall state whether compliance has been demonstrated and contain the justifications for each statement.
Credits for examinations, other than basic knowledge examinations carried out in maintenance training organisations approved in accordance with Annex IV (Part-147), can only be granted by the competent authority of the Member State in which the qualification has been obtained, unless a formal agreement exists with such competent authority advising otherwise.
No credit can be granted unless there is a statement of compliance for each module and submodule, indicating where the equivalent standard can be found in the technical qualification.
The competent authority shall check on a regular basis whether the following have changed:
the national qualification standard;
Appendices I or VII to this Annex (Part-66), as applicable.
The competent authority shall also assess if changes to the credit report are consequently required. Such changes shall be documented, dated and recorded.’;
in point 66.B.410, point (c) is replaced by the following:
Appendix I is amended as follows:
in point 1, the title and the first subparagraph are replaced by the following:
Basic knowledge for categories A, B1, B2, B2L and B3 is indicated by knowledge levels (1, 2 or 3) of each applicable subject. Category C applicants shall meet either the category B1 or the category B2 basic knowledge levels.’’;
in point 2, the title, the first subparagraph and the first table are replaced by the following:
Qualification on basic subjects for each aircraft maintenance licence category or subcategory shall be in accordance with the following matrix, where applicable subjects are indicated by an ‘X’:
For categories A, B1 and B3:
Subject module | A or B1 aeroplane with: | A or B1 helicopter with: | B3 | ||
---|---|---|---|---|---|
Turbine engine(s) | Piston engine(s) | Turbine engine(s) | Piston engine(s) | Piston engine non-pressurised aeroplanes of 2 000 kg MTOM and below | |
1 | X | X | X | X | X |
2 | X | X | X | X | X |
3 | X | X | X | X | X |
4 | X | X | X | X | X |
5 | X | X | X | X | X |
6 | X | X | X | X | X |
7A | X | X | X | X | |
7B | X | ||||
8 | X | X | X | X | X |
9A | X | X | X | X | |
9B | X | ||||
10 | X | X | X | X | X |
11A | X | ||||
11B | X | ||||
11C | X | ||||
12 | X | X | |||
13 | |||||
14 | |||||
15 | X | X | |||
16 | X | X | X | ||
17A | X | X | |||
17B | X |
For categories B2 and B2L:
Subject module/submodules | B2 | B2L |
---|---|---|
1 | X | X |
2 | X | X |
3 | X | X |
4 | X | X |
5 | X | X |
6 | X | X |
7A | X | X |
7B | ||
8 | X | X |
9A | X | X |
9B | ||
10 | X | X |
11A | ||
11B | ||
11C | ||
12 | ||
13.1 and 13.2 | X | X |
13.3(a) | X | X (for system rating ‘Autoflight’) |
13.3(b) | X | |
13.4(a) | X | X (for system rating ‘Com/Nav’) |
13.4(b) | X | X (for system rating ‘Surveillance’) |
13.4(c) | X | |
13.5 | X | X |
13.6 | X | |
13.7 | X | X (for system rating ‘Autoflight’) |
13.8 | X | X (for system rating ‘Instruments’) |
13.9 | X | X |
13.10 | X | |
13.11 to 13.18 | X | X (for system rating ‘Airframe systems’) |
13.19 to 13.22 | X | |
14 | X | X (for system ratings ‘Instruments’ and ‘Airframe systems’) |
15 | ||
16 | ||
17A | ||
17B’ |
in the tables of the modules 1, 2, 3, 4, 5, 6, 7A, 8, 9A, 10 and 14, the content of box
B2
is replaced by the following:
B2
B2L
in the table of module 5, ‘1’ is replaced by ‘—’ from submodule 5.5(a) for the B3 licence;
in the table of module 7B, ‘—’ is replaced by ‘1’ from submodule 7.4 for the B3 licence;
in the table of module 7B submodule 7.10, ‘1’ is replaced by ‘2’ for the B3 licence;
in the table of module 11A submodule 11.8 point (b), ‘1’ is replaced by ‘2’ for the B1.1 licence;
in the table of module 11A, the context box of the first column of submodule 11.16 is replaced by the following:
System lay-out;
Sources: engine/APU (Auxiliary Power Unit), compressors, reservoirs, ground supply;
Pressure and vacuum pumps
Pressure control;
Distribution;
Indications and warnings;
Interfaces with other systems.’;
in the table of module 11A, the context box of the first column of submodule 11.20 is replaced by the following:
The units and components which furnish a means of entertaining the passengers and providing communication within the aircraft (Cabin Intercommunication Data System (CIDS)) and between the aircraft cabin and ground stations (Cabin Network Service (CNS)). They include voice, data, music and video transmissions.
CIDS provides an interface between cockpit/cabin crew and cabin systems. These systems support data exchange between the different related Line Replaceable Units (LRUs) and they are typically operated via Flight Attendant Panels (FAPs).
CNS typically consists of a server, interfacing with, among others, the following systems:
Data/Radio Communication;
Cabin Core System (CCS);
In-flight Entertainment System (IFES);
External Communication System (ECS);
Cabin Mass Memory System (CMMS);
Cabin Monitoring System (CMS);
Miscellaneous Cabin Systems (MCSs).
CNS may host functions such as:
access to pre-departure/departure reports;
e-mail/intranet/internet access; passenger database.’;
in the table of module 11B, submodule 11.8 point (b), ‘3’ is replaced by ‘2’ for the B1.2 licence;
in the table of module 11B, the context box of the first column of submodule 11.16 is replaced by the following:
System lay-out;
Sources: engine/APU, compressors, reservoirs, ground supply;
Pressure and vacuum pumps
Pressure control;
Distribution;
Indications and warnings;
Interfaces with other systems.’;
in the table of module 12, the context box of the first column of submodule 12.16 is replaced by the following:
System lay-out;
Sources: engine/APU, compressors, reservoirs, ground supply;
Pressure and vacuum pumps
Pressure control;
Distribution;
Indications and warnings;
Interfaces with other systems.’;
module 13 is replaced by the following:
Appendix II is amended as follows:
the title is replaced by the following:
‘Appendix II
Basic Examination Standard
(except for category L licence)’;
in points 2.2.1 to 2.2.10, the words ‘Category B2’ are replaced by the words ‘Category B2 and B2L’;
points 2.2.13 and 2.2.14 are replaced by the following:
Category B2: 180 multiple-choice and 0 essay questions. Time allowed: 225 minutes. Questions and time allowed may be split into two examinations, as appropriate.
Category B2L:
System rating | Number of multiple-choice questions | Time allowed (minutes) |
---|---|---|
Basic requirements (Submodules 13.1, 13.2, 13.5 and 13.9) | 28 | 35 |
COM/NAV (Submodule 13.4(a)) | 24 | 30 |
INSTRUMENTS (Submodule 13.8) | 20 | 25 |
AUTOFLIGHT (Submodules 13.3(a) and 13.7) | 28 | 35 |
SURVEILLANCE (Submodule 13.4(b)) | 8 | 10 |
AIRFRAME SYSTEMS (Submodules 13.11 to 13.18) | 32 | 40 |
Category B2 and B2L: 24 multiple-choice and 0 essay questions. Time allowed: 30 minutes.
NOTE: The B2L examination for module 14 is only applicable to the ‘Instruments’ and ‘Airframe Systems’ ratings.’;
Appendix III is amended as follows:
in point 1.(a), point (ii) is replaced by the following:
in point 1.(b), point (ii) is replaced by the following:
in point 3.1(c), the footnotes in the table are replaced by the following:
For non-pressurised piston engine aeroplanes below 2 000 kg MTOM, the minimum duration can be reduced by 50 %.
For helicopters in Group 2 (as defined in point 66.A.5), the minimum duration can be reduced by 30 %.’;
in point 3.1(e), the level of training for the airframe system 21A ‘Air Supply’, corresponding to the column ‘Helicopters Turbine’, is replaced by the following:
‘3 | 1’; |
in point 3.1(e) the level of training for the airframe system 31A ‘Instrument Systems’, corresponding to the column ‘Helicopters piston’, is replaced by the following:
‘3 | 1’; |
Appendix IV is replaced by the following:
The table below shows the experience requirements for adding a new category or subcategory to an existing Part-66 licence.
The experience shall be practical maintenance experience in operating aircraft in the subcategory relevant to the application.
The experience requirement will be reduced by 50 % if the applicant has completed an approved Part-147 course relevant to the subcategory.
ToFrom | A1 | A2 | A3 | A4 | B1.1 | B1.2 | B1.3 | B1.4 | B2 | B2L | B3 |
---|---|---|---|---|---|---|---|---|---|---|---|
A1 | — | 6 months | 6 months | 6 months | 2 years | 6 months | 2 years | 1 year | 2 years | 1 year | 6 months |
A2 | 6 months | — | 6 months | 6 months | 2 years | 6 months | 2 years | 1 year | 2 years | 1 year | 6 months |
A3 | 6 months | 6 months | — | 6 months | 2 years | 1 year | 2 years | 6 months | 2 years | 1 year | 1 year |
A4 | 6 months | 6 months | 6 months | — | 2 years | 1 year | 2 years | 6 months | 2 years | 1 year | 1 year |
B1.1 | None | 6 months | 6 months | 6 months | — | 6 months | 6 months | 6 months | 1 year | 1 year | 6 months |
B1.2 | 6 months | None | 6 months | 6 months | 2 years | — | 2 years | 6 months | 2 years | 1 year | None |
B1.3 | 6 months | 6 months | None | 6 months | 6 months | 6 months | — | 6 months | 1 year | 1 year | 6 months |
B1.4 | 6 months | 6 months | 6 months | None | 2 years | 6 months | 2 years | — | 2 years | 1 year | 6 months |
B2 | 6 months | 6 months | 6 months | 6 months | 1 year | 1 year | 1 year | 1 year | — | — | 1 year |
B2L | 6 months | 6 months | 6 months | 6 months | 1 year | 1 year | 1 year | 1 year | 1 year | — | 1 year |
B3 | 6 months | None | 6 months | 6 months | 2 years | 6 months | 2 years | 1 year | 2 years | 1 year | —’’; |
Appendix V is replaced by the following:
’’;
Appendix VI is amended as follows:
the title is replaced by the following:
‘Appendix VI – Aircraft Maintenance Licence referred to in Annex III (Part-66) – EASA Form 26’;
in the beginning of the Appendix VI and before the existing EASA Form 26 the following text is inserted:
the following Appendixes VII and VIII are added:
The definitions of the different levels of knowledge required in this Appendix are the same as those contained in point 1 of Appendix I to Annex III (Part-66).
Subcategories | Modules required for each subcategory (refer to the syllabus table below) |
---|---|
L1C: composite sailplanes | 1L, 2L, 3L, 5L, 7L and 12L |
L1: sailplanes | 1L, 2L, 3L, 4L, 5L, 6L, 7L and 12L |
L2C: composite powered sailplanes and composite ELA1 aeroplanes | 1L, 2L, 3L, 5L, 7L, 8L and 12L |
L2: powered sailplanes and ELA1 aeroplanes | 1L, 2L, 3L, 4L, 5L, 6L, 7L, 8L and 12L |
L3H: hot-air balloons | 1L, 2L, 3L, 9L and 12L |
L3G: gas balloons | 1L, 2L, 3L, 10L and 12L |
L4H: hot-air airships | 1L, 2L, 3L, 8L, 9L, 11L and 12L |
L4G: ELA2 gas airships | 1L, 2L, 3L, 8L, 10L, 11L and 12L |
L5: gas airships above ELA2 | Basic knowledge requirements for any B1 subcategory plus 8L (for B1.1 and B1.3), 10L, 11L and 12L |
The standardisation basis for examinations related to the Appendix VII basic knowledge requirements shall be as follows:
all examinations must be carried out using the multiple-choice question format as specified in point (ii). The incorrect alternatives must seem equally plausible to anyone ignorant of the subject. All of the alternatives should be clearly related to the question and of similar vocabulary, grammatical construction and length. In numerical questions, the incorrect answers should correspond to procedural errors such as corrections applied in the wrong sense or incorrect unit conversions: they must not be mere random numbers;
each multiple-choice question must have three alternative answers of which only one must be the correct answer and the candidate must be allowed a time per module which is based upon a nominal average of 75 seconds per question;
the pass mark for each module is 75 %;
penalty marking (negative points for failed questions) is not to be used;
the level of knowledge required in the questions must be proportionate to the level of technology of the aircraft category.
The number of questions per module shall be as follows:
module 1L ‘Basic knowledge’: 12 questions. Time allowed: 15 minutes;
module 2L ‘Human factors’: 8 questions. Time allowed: 10 minutes;
module 3L ‘Aviation legislation’: 24 questions. Time allowed: 30 minutes;
module 4L ‘Airframe wooden/metal tube and fabric’: 32 questions. Time allowed: 40 minutes;
module 5L ‘Airframe composite’: 32 questions. Time allowed: 40 minutes;
module 6L ‘Airframe metal’: 32 questions. Time allowed: 40 minutes;
module 7L ‘Airframe general’: 64 questions. Time allowed: 80 minutes;
module 8L ‘Power plant’: 48 questions. Time allowed: 60 minutes;
module 9L ‘Balloon/Airship hot air’: 36 questions. Time allowed: 45 minutes;
module 10L ‘Balloon/Airship gas (free/tethered)’: 40 questions. Time allowed: 50 minutes;
module 11L ‘Airships hot air/gas’: 36 questions. Time allowed: 45 minutes;
Module 12L ‘Radio Com/ELT/transponder/instruments’: 16 questions. Time allowed 20 minutes.
.’.
Annex IV is amended as follows:
in point 147.A.145, point (a) is replaced by the following:
basic training courses to the Annex III (Part-66) syllabus, or part thereof;
aircraft type/task training courses in accordance with Annex III (Part-66);
the examination of students who attended the basic or aircraft type training course at the maintenance training organisation;
the examination of students who did not attend the aircraft type training course at the maintenance training organisation;
the examination of students who did not attend the basic training course at the maintenance training organisation, provided that:
the examination is conducted at one of the locations identified in the approval certificate, or
if performed at locations not identified in the approval certificate, as permitted by points (b) and (c), either
the examination is provided through a European Central Question Bank (ECQB), or
in the absence of an ECQB, the competent authority selects the questions for the examination;
the issue of certificates in accordance with Appendix III following successful completion of the approved basic or aircraft type training courses and examinations specified in points (a)(i), (a)(ii), (a)(iii), (a)(iv) and (a)(v), as applicable.’;
Appendixes I and II are replaced by the following:
The minimum duration of a complete basic training course shall be as follows:
a This number of hours shall be increased as follows, depending on the additional system ratings selected:
| ||||||||||||||||
Basic Course | Duration (in hours) | Theoretical Training Ratio (in %) | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A1 | 800 | 30–35 | ||||||||||||||
A2 | 650 | 30–35 | ||||||||||||||
A3 | 800 | 30–35 | ||||||||||||||
A4 | 800 | 30–35 | ||||||||||||||
B1.1 | 2 400 | 50–60 | ||||||||||||||
B1.2 | 2 000 | 50–60 | ||||||||||||||
B1.3 | 2 400 | 50–60 | ||||||||||||||
B1.4 | 2 400 | 50–60 | ||||||||||||||
B2 | 2 400 | 50–60 | ||||||||||||||
B2L | 1 500a | 50–60 | ||||||||||||||
B3 | 1 000 | 50–60 |
;’;
Annex Va is amended as follows:
in the table of contents, the following point T.A.501 is inserted after the entry ‘Subpart E Maintenance Organisation’:
‘T.A.501 Maintenance Organisation’;
in point T.A.201, point 3 is replaced by the following:
the following title is added to the provisions of Subpart E Maintenance Organisation:
‘T.A. 501 Maintenance Organisation’;
Point T.A.716 is replaced by the following:
After receipt of notification of findings according to T.B.705, the continuing airworthiness management organisation shall define a corrective action plan and demonstrate corrective action to the satisfaction of the competent authority within a period agreed with this authority.’.
Commission Regulation (EU) No 1321/2014 of 26 November 2014 on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on the approval of organisations and personnel involved in these tasks (OJ L 362, 17.12.2014, p. 1).
Commission Regulation (EU) 2015/1536 of 16 September 2015 amending Regulation (EU) No 1321/2014 as regards alignment of rules for continuing airworthiness with Regulation (EC) No 216/2008, critical maintenance tasks and aircraft continuing airworthiness monitoring (OJ L 241, 17.9.2015, p. 16).
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys