- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Commission Delegated Regulation (EU) 2019/2017 of 11 March 2019 supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard to energy labelling of household dishwashers and repealing Commission Delegated Regulation (EU) No 1059/2010 (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
EU_status_warning_original_version
This legislation may since have been updated - see the latest available (revised) version
The following definitions shall apply:
‘Energy Efficiency Index’ (EEI) means the ratio of the eco programme energy consumption to the standard programme energy consumption;
‘eco programme energy consumption’ (EPEC) means the energy consumption of a household dishwasher for the eco programme, expressed in kilowatt hour per cycle;
‘standard programme energy consumption’ (SPEC) means the energy consumption taken as a reference as a function of the rated capacity of the household dishwasher, expressed in kilowatt hour per cycle;
‘programme’ means a series of operations that are pre-defined and are declared by the supplier as suitable for specified levels of soil or types of load, or both;
‘cycle’ means a complete cleaning, rinsing, and drying process, as defined by the programme selected, consisting of a series of operations until all activity ceases;
‘quick response’ (QR) code means a matrix barcode included on the energy label of a product model that links to that model’s information in the public part of the product database;
‘place setting’ (ps) means a set of tableware for use by one person, not including serving pieces;
‘serving pieces’ means items for the preparation and serving of food which can include pots, serving bowls, serving cutlery and a platter;
‘rated capacity’ means the maximum number of place settings together with the serving pieces, which can be cleaned, rinsed and dried in a household dishwasher in one cycle when loaded in accordance with the supplier’s instructions;
‘eco programme water consumption’ (EPWC) means the water consumption of a household dishwasher for the eco programme, expressed in litres per cycle;
‘cleaning performance index’ (IC) means the ratio of the cleaning performance of a household dishwasher to the cleaning performance of a reference household dishwasher;
‘drying performance index’ (ID) means the ratio of the drying performance of a household dishwasher to the drying performance of a reference household dishwasher;
‘programme duration’ (Tt) means the length of time beginning with the initiation of the programme selected, excluding any user programmed delay, until the end of the programme is indicated and the user has access to the load;
‘eco’ means the name of the programme of a household dishwasher declared by the manufacturer as suitable to clean normally soiled tableware, and to which the information on the energy label and the product information sheet relates;
‘off mode’ means a condition in which the household dishwasher is connected to the mains and is not providing any function; the following shall also be considered as off mode:
conditions providing only an indication of off mode;
conditions providing only functionalities intended to ensure electromagnetic compatibility pursuant to Directive 2014/30/EU of the European Parliament and of the Council(1);
‘standby mode’ means a condition where the household dishwasher is connected to the mains and provides only the following functions, which may persist for an indefinite time:
reactivation function, or reactivation function and a mere indication of enabled reactivation function, and/or
reactivation function through a connection to a network; and/or
information or status display, and/or
detection function for emergency measures;
‘network’ means a communication infrastructure with a topology of links, an architecture, including the physical components, organisational principles, communication procedures and formats (protocols);
‘delay start’ means a condition where the user has selected a specified delay to the beginning of the cycle of the selected programme;
‘guarantee’ means any undertaking by the retailer or supplier to the consumer to:
reimburse the price paid; or
replace, repair or handle the household dishwashers in any way if they do not meet the specifications set out in the guarantee statement or in the relevant advertising;
‘display mechanism’ means any screen, including tactile screen, or other visual technology used for displaying internet content to users;
‘nested display’ means any visual interface where an image or data set is accessed by a mouse click, mouse roll-over or tactile screen expansion of another image or data set;
‘tactile screen’ means a screen responding to touch, such as that of a tablet computer, slate computer or a smartphone;
‘alternative text’ means text provided as an alternative to a graphic allowing information to be presented in non-graphical form where display devices cannot render the graphic or as an aid to accessibility such as input to voice synthesis applications.
The energy efficiency class of a household dishwasher shall be determined on the basis of its Energy Efficiency Index (EEI) as set out in Table 1.
The EEI of a household dishwasher shall be calculated in accordance with Annex IV.
Energy efficiency classes of electronic displays
Energy efficiency class | Energy Efficiency Index |
---|---|
A | EEI < 32 |
B | 32 ≤ EEI < 38 |
C | 38 ≤ EEI < 44 |
D | 44 ≤ EEI < 50 |
E | 50 ≤ EEI < 56 |
F | 56 ≤ EEI < 62 |
G | EEI ≥ 62 |
The acoustic airborne noise emission class of a household dishwasher shall be determined on the basis of the acoustic airborne noise emissions as set out in Table 2.
Acoustic airborne noise emission classes
Acoustic airborne noise emission class | Noise (dB(A) |
---|---|
A | n < 39 |
B | 39 ≤ n < 45 |
C | 45 ≤ n < 51 |
D | 51 ≤ n |
The following information shall be included in the label:
QR code;
supplier's name or trade mark;
supplier's model identifier;
scale of energy efficiency classes from A to G;
the energy efficiency class determined in accordance with point A of Annex II;
eco programme energy consumption (EPEC) in kWh per 100 cycles, rounded to the nearest integer;
rated capacity in standard place settings, for the eco programme;
eco programme water consumption (EPWC) in litres per cycle, rounded to one decimal place;
duration of the eco programme in h:min rounded to the nearest minute;
airborne acoustic noise emissions expressed in dB(A) with respect to 1 pW and rounded to the nearest integer, and airborne acoustic noise emission class, determined in accordance with point B of Annex II;
the number of this Regulation, that is ‘2019/2017’.
The design of the label shall be as in the figure below.
Whereby:
the label shall be at least 96 mm wide and 192 mm high. Where the label is printed in a larger format, its content shall nevertheless remain proportionate to the specifications above;
the background of the label shall be 100 % white;
the typefaces shall be Verdana and Calibri;
the dimensions and specifications of the elements constituting the label shall be as indicated in the label design for household dishwashers;
colours shall be CMYK – cyan, magenta, yellow and black, following this example: 0,70,100,0: 0 % cyan, 70 % magenta, 100 % yellow, 0 % black;
the label shall fulfil all the following requirements (numbers refer to the figure above):
the A to G scale shall be as follows:
the letters of the energy efficiency scale shall be 100 % white and in Calibri Bold 19 pt; the letters shall be centred on an axis at 4,5 mm from the left side of the arrows;
the colours of the A to G scale arrows shall be as follows:
A-class: 100,0,100,0;
B-class: 70,0,100,0;
C-class: 30,0,100,0;
D-class: 0,0,100,0;
E-class: 0,30,100,0;
F-class: 0,70,100,0;
G-class: 0,100,100,0;
the letter of the energy efficiency class shall be 100 % white and in Calibri Bold 33 pt. The energy efficiency class arrow and the corresponding arrow in the A to G scale shall be positioned in such a way that their tips are aligned. The letter in the energy efficiency class arrow shall be positioned in the centre of the rectangular part of the arrow which shall be 100 % black;
the value of the eco programme energy consumption per 100 cycles shall be in Verdana Bold 28 pt; ‘kWh’ shall be in Verdana Regular 18 pt; the number ‘100’ in the pictogram representing 100 cycles shall be in Verdana Regular 14 pt The value and unit shall be centred and 100 % black;
the pictograms shall be as shown as in the label designs and as follows:
the pictograms' lines shall have a weight of 1,2 pt and they and the texts (numbers and units) shall be 100 % black;
the texts under the pictograms shall be in Verdana Bold 16 pt with the unit in Verdana Regular 12 pt, and they shall be centred under the pictograms;
the airborne acoustical noise emission pictogram: the number of decibels in the loudspeaker shall be in Verdana Bold 12 pt, with the unit ‘dB’ in Verdana Regular 9 pt; the range of noise classes (A to D) shall be centred under the pictogram, with the letter of the applicable noise class in Verdana Bold 16 pt and the other letters of the noise classes in Verdana Regular 10 pt;
For the purposes of compliance and verification of compliance with the requirements of this Regulation, measurements and calculations shall be made using harmonised standards the reference numbers of which have been published for this purpose in the Official Journal of the European Union, or other reliable, accurate and reproducible methods, which takes into account the generally recognised state-of-the-art, and in line with the following provisions.
The energy consumption, EEI, water consumption, programme duration, cleaning and drying performance, and airborne acoustical noise emissions of a household dishwasher model shall be measured and/or calculated using the eco programme with the household dishwasher loaded at rated capacity. The energy consumption, water consumption, programme duration, cleaning and drying performance shall be measured concurrently.
The EPWC is expressed in litres per cycle and rounded to one decimal place.
The duration of the eco programme (Tt) is expressed in hours and minutes and rounded to the nearest minute.
Airborne acoustical noise emissions is measured in dB(A) with respect to 1 pW and rounded to the nearest integer.
For the calculation of the EEI of a household dishwasher model, the EPEC of the household dishwasher is compared to its SPEC.
The EEI is calculated as follows and rounded to one decimal place:
EEI = (EPEC/SPEC) × 100
where:
EPEC is the eco programme energy consumption of the household dishwasher, measured in kWh/cycle and rounded to three decimal places;
SPEC is the standard programme energy consumption of the household dishwasher.
The SPEC is calculated in kWh/cycle and rounded to three decimal places as follows:
for household dishwashers with rated capacity ps ≥ 10 and width > 50 cm:
SPEC = 0,025 × ps + 1,35
for household dishwashers with rated capacity ps ≤ 9 or width ≤ 50 cm:
SPEC = 0,09 × ps + 0,45
where ps is the number of place settings.
For the calculation of the cleaning performance index (IC) of a household dishwasher model, the cleaning performance of the eco programme is compared to the cleaning performance of a reference dishwasher.
The IC is calculated as follows and rounded to two decimal places:
IC = exp (ln IC)
and
where:
CT,i is the cleaning performance of the eco programme of the household dishwasher under test for one test run (i), rounded to two decimal places;
CR,i is the cleaning performance of the reference dishwasher for one test run (i), rounded to two decimal places;
n is the number of test runs.
For the calculation of the drying performance index (ID) of a household dishwasher model, the drying performance of the eco programme is compared to the drying performance of the reference dishwasher.
The ID is calculated as follows and rounded to two decimal places:
ID = exp (ln ID)
and
where:
ID,i is the drying performance index of the eco programme of the household dishwasher under test for one test run (i);
n is the number of combined cleaning and drying test runs.
The ID,i is calculated as follows and rounded to two decimal places:
ln ID,i = ln (DT,i/DR,t)
where:
DT,i is the average drying performance score of the eco programme of the household dishwasher under test for one test run (i), rounded to two decimal places;
DR,t is the target drying score of the reference dishwasher, rounded to two decimal places.
The power consumption of the off mode (Po), standby mode (Psm) and where applicable delay start (Pds) are measured. The measured values are expressed in W and rounded to two decimal places.
During measurements of the power consumption in low power modes, the following shall be checked and recorded:
the display or not of information;
the activation or not of a network connection.
The information part of the product information sheet of household dishwashers pursuant to point 1(b) of Article 3 shall be entered into the product database by the supplier according to Table 3.
The user manual or other literature provided with the product shall clearly indicate the link to the model in the product database as a human-readable Uniform Resource Locator (URL) or as QR-code or by providing the product registration number.
Content, order and format of the product information sheet
a for the eco programme. | ||||
b changes to these items shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369. | ||||
c if the product database automatically generates the definitive content of this cell the supplier shall not enter these data. | ||||
d Commission Regulation (EU) 2019/2022 of 1 October 2019 laying down ecodesign requirements for household dishwashers pursuant to Directive 2009/125/EC of the European Parliament and of the Council amending Commission Regulation (EC) No 1275/2008 and repealing Commission Regulation (EU) No 1016/2010 (see page 267 of this Official Journal). | ||||
Supplier’s name or trade mark: | ||||
Supplier’s address b : | ||||
Model identifier: | ||||
General product parameters: | ||||
Parameter | Value | Parameter | Value | |
Rated capacitya (ps) | x | Dimensions in cm | Height | x |
Width | x | |||
Depth | x | |||
EEIa | x,x | Energy efficiency classa | [A/B/C/D/E/F/G]c | |
Cleaning performance indexa | x,xx | Drying performance indexa | x,xx | |
Energy consumption in kWh [per cycle], based on the eco programme using cold water fill. Actual energy consumption will depend on how the appliance is used. | x,xxx | Water consumption in litres [per cycle], based on the eco programme. Actual water consumption will depend on how the appliance is used and on the hardness of the water. | x,x | |
Programme durationa (h:min) | x:xx | Type | [built-in/free-standing] | |
Airborne acoustical noise emissionsa (dB(A) re 1 pW) | x | Airborne acoustical noise emission classa | [A/B/C/D]c | |
Off-mode (W) | x,xx | Standby mode (W) | x,xx | |
Delay start (W) (if applicable) | x,xx | Networked standby (W) (if applicable) | x,xx | |
Minimum duration of the guarantee offered by the supplier b : | ||||
Additional information: | ||||
Weblink to the supplier’s website, where the information in point 6 of Annex II to Commission Regulation (EU) 2019/2022d b is found: |
information as set out in Annex V;
information as set out in Table 4; these values are considered as the declared values for the purpose of the verification procedure in Annex IX;
Information to be included in the technical documentation
PARAMETER | UNIT | VALUE |
---|---|---|
Eco programme energy consumption (EPEC) rounded to three decimal places | kWh/cycle | X,XXX |
Standard programme energy consumption (SPEC) rounded to three decimal places | kWh/cycle | X,XXX |
Energy Efficiency Index (EEI) | — | X,X |
Eco programme water consumption (EPWC) rounded to one decimal place | l/cycle | X,X |
Cleaning performance index (IC) | — | X,XX |
Drying performance index (ID) | — | X,XX |
Duration of the eco programme (Tt) rounded to the nearest minute | h:min | X:XX |
Power consumption in off-mode (Po) rounded to two decimal places | W | X,XX |
Power consumption in standby mode (Psm) rounded to two decimal places | W | X,XX |
Does standby mode include the display of information? | — | Yes/No |
Power consumption in standby mode (Psm) in condition of networked standby (if applicable), rounded to two decimal places | W | X,XX |
Power consumption in delay start (Pds) (if applicable) rounded to two decimal places | W | X,XX |
Airborne acoustical noise emissions | dB(A) re 1 pW | X |
where appropriate, the references of the harmonised standards applied;
where appropriate, the other technical standards and specifications used;
the details and the results of calculations performed in accordance with Annex IV;
a list of all equivalent models including the model identifier.
from a model that has the same technical characteristics relevant for the technical information to be provided but is produced by a different supplier;
by calculation on the basis of design or extrapolation from another model of the same or a different supplier,
the technical documentation shall include the details of such calculation, the assessment undertaken by suppliers to verify the accuracy of the calculation and, where appropriate, the declaration of identity between the models of different suppliers.
an arrow, containing the letter of the energy efficiency class in 100 % white, Calibri Bold, and in a font size at least equivalent to that of the price, when the price is shown;
the colour of the arrow matching the colour of the energy efficiency class;
the range of available energy efficiency classes in 100 % black; and,
the size shall be such that the arrow is clearly visible and legible. The letter in the energy efficiency class arrow shall be positioned in the centre of the rectangular part of the arrow, with a border of 0,5 pt in 100 % black placed around the arrow and the letter of the energy efficiency class.
By way of derogation, if the visual advertisement, technical promotional material or paper-based distance selling is printed in monochrome, the arrow can be in monochrome in that visual advertisement, technical promotional material or paper-based distance selling.
be an arrow in the colour corresponding to the energy efficiency class of the product on the label;
indicate the energy efficiency class of the product on the arrow in 100 % white, Calibri Bold and in a font size equivalent to that of the price;
have the range of available energy efficiency classes in 100 % black; and,
have one of the following two formats, and its size shall be such that the arrow is clearly visible and legible. The letter in the energy efficiency class arrow shall be positioned in the centre of the rectangular part of the arrow, with a visible border in 100 % black placed around the arrow and the letter of the energy efficiency class:
the image referred to in point 2 of this Annex shall be shown on the display mechanism in proximity to the price of the product;
the image shall link to the label set out in Annex III;
the label shall be displayed after a mouse click, mouse roll-over or tactile screen expansion on the image;
the label shall be displayed by pop up, new tab, new page or inset screen display;
for magnification of the label on tactile screens, the device conventions for tactile magnification shall apply;
the label shall cease to be displayed by means of a close option or other standard closing mechanism;
the alternative text for the graphic, to be displayed on failure to display the label, shall be the energy efficiency class of the product in a font size equivalent to that of the price.
The verification tolerances set out in this Annex relate only to the verification of the measured parameters by Member State authorities and shall not be used by the supplier as an allowed tolerance to establish the values in the technical documentation. The values and classes on the label or in the product information sheet shall not be more favourable for the supplier than the values reported in the technical documentation.
Where a model has been designed to be able to detect it is being tested (e.g. by recognising the test conditions or test cycle), and to react specifically by automatically altering its performance during the test with the objective of reaching a more favourable level for any of the parameters specified in this Regulation or included in the technical documentation or included in any of the documentation provided, the model and all equivalent models shall be considered not compliant.
When verifying the compliance of a product model with the requirements laid down in this Regulation, the authorities of the Member States shall apply the following procedure:
The Member State authorities shall verify one single unit of the model.
The model shall be considered to comply with the applicable requirements if:
the values given in the technical documentation pursuant to point 3 of Article 3 of Regulation (EU) 2017/1369 (declared values), and, where applicable, the values used to calculate these values, are not more favourable for the supplier than the corresponding values given in the test reports; and
the values published on the label and in the product information sheet are not more favourable for the supplier than the declared values, and the indicated energy efficiency class and the airborne acoustical noise emission class are not more favourable for the supplier than the class determined by the declared values; and
when the Member State authorities test the unit of the model, the determined values (the values of the relevant parameters as measured in testing and the values calculated from these measurements) comply with the respective verification tolerances as given in Table 5.
If the results referred to in points 2(a) or (b) are not achieved, the model and all equivalent models shall be considered not to comply with this Regulation.
If the result referred to in point 2(c) is not achieved, the Member State authorities shall select three additional units of the same model for testing. As an alternative, the three additional units selected may be of one or more equivalent models.
The model shall be considered to comply with the applicable requirements if for these three units the arithmetical mean of the determined values complies with the respective tolerances given in Table 5.
If the result referred to in point 5 is not achieved, the model and all equivalent models shall be considered not to comply with this Regulation.
The Member State authorities shall provide all relevant information to the authorities of the other Member States and to the Commission without delay after a decision being taken on the non-compliance of the model according to points 3 and 6.
The Member State authorities shall use the measurement and calculation methods set out in Annex IV.
The Member State authorities shall only apply the verification tolerances that are set out in Table 5 and shall only use the procedure described in points 1 to 7 for the requirements referred to in this Annex. For the parameters in Table 5, no other tolerances, such as those set out in harmonised standards or in any other measurement method, shall be applied.
Verification tolerances
a In the case of three additional units tested as prescribed in point 4, the determined value means the arithmetical mean of the values determined for these three additional units. | |
Parameter | Verification tolerances |
---|---|
Eco programme energy consumption (EPEC) | The determined valuea shall not exceed the declared value of EPEC by more than 5 %. |
Eco programme water consumption (EPWC) | The determined valuea shall not exceed the declared value of EPWC by more than 5 %. |
Cleaning performance index (IC) | The determined valuea shall not be less than the declared value of IC by more than 14 %. |
Drying performance index (ID) | The determined valuea shall not be less than the declared value of ID by more than 12 %. |
Programme duration (Tt) | The determined valuea shall not exceed the declared values Tt by more than 5 % or 10 minutes, whichever is the longer. |
Power consumption in off mode (Po) | The determined valuea of power consumption Po shall not exceed the declared value by more than 0,1 W. |
Power consumption in standby mode (Psm) | The determined valuea of power consumption Psm shall not exceed the declared value by more than 10 % if the declared value is higher than 1,0 W, or by more than 0,1 W if the declared value is lower than or equal to 1,0 W. |
Power consumption in delay start (Pds) | The determined valuea of power consumption Pds shall not exceed the declared value by more than 10 % if the declared value is higher than 1,0 W, or by more than 0,1 W if the declared value is lower than or equal to 1,0 W. |
Airborne acoustic noise emissions | The determined valuea shall not exceed the declared value by more than 2 dB(A) re 1pW. |
Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (OJ L 96, 29.3.2014, p. 79).
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys