- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Commission Implementing Regulation (EU) 2019/779 of 16 May 2019 laying down detailed provisions on a system of certification of entities in charge of maintenance of vehicles pursuant to Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No 445/2011 (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
EU_status_warning_original_version
This legislation may since have been updated - see the latest available (revised) version
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety(1), and in particular Article 14(6) and (8) thereof,
Whereas:
(1) Directive (EU) 2016/798 aims to improve access to the market for rail transport services by defining common principles for the management, regulation and supervision of railway safety. Directive (EU) 2016/798 also provides for a framework to be put in place to ensure equal conditions for all entities in charge of maintenance for vehicles through application of the same certification requirements and conditions across the Union.
(2) The purpose of the certification system is to provide a framework for harmonising requirements and methods to assess the ability of entities in charge of maintenance across the Union.
(3) Following the positive evaluation of the current system of certification of entities in charge of maintenance for freight wagons addressed to the Commission on 11 March 2015 by the European Union Agency for Railways (the Agency), on 27 September 2018, the Agency issued Recommendation 007REC1004 on the revision of Commission Regulation (EU) No 445/2011(2).
(4) Annex III to Directive (EU) 2016/798 sets out the requirements and assessment criteria for organisations applying for a certificate for entity in charge of maintenance (‘ECM certificate’) or for a certificate in respect of maintenance functions outsourced by an entity in charge of maintenance. In order to be fully applicable those requirements need to be further detailed and specified for the different maintenance functions as referred to in points (a) to (d) of Article 14(3) of that Directive.
(5) Taking into account the wide variety of design and maintenance methods, that system of maintenance should be more oriented on the management requirements, such as the organisation of the entity in charge of maintenance, rather than a specific technical requirement.
(6) Safety-critical components require particular attention and priority in maintenance procedures. However, the criticality aspects of any component are related to the particular design of the vehicle and to the particular functions of the component. It is therefore not possible to establish an exhaustive list of safety-critical components. The essential elements of safety-critical components should be set out.
(7) When designing a new type of vehicle, the manufacturer should determine the criticality of the functions and components of their products by a risk-based analysis and record them in the technical file referred to in Article 15(4) of Directive (EU) 2016/797 of the European Parliament and of the Council(3). The determination of the criticality should take into account how the component is intended to be used and the environment in which it will be used. The entity in charge of maintenance should have access to the relevant parts of the technical file to ensure it is fully aware of the criticality of the components for each type of vehicles under its responsibility. The entity in charge of maintenance should identify criticalities by observing and analysing the failures and tracing all its interventions, and be obliged to provide information at least on the safety-critical components identified as such by the manufacturer.
(8) Where the entity in charge of maintenance considers that new safety-critical components should be included in the technical file or components should be reclassified as non safety-critical, it should promptly inform the manufacturer, the holder of the vehicle type authorisation and the holder of the vehicle authorisation to allow taking the necessary measures, including a revision of the technical file, if needed.
(9) An entity or organisation taking on one or more maintenance functions as referred to in points (b) to (d) of Article 14(3) of Directive (EU) 2016/798 or part of those maintenance functions may apply the system of certification on a voluntary basis, based on the principles specified in Article 6. The aim of that certification is to ensure that maintenance is carried out within a controlled process that meets common quality standards in all its steps. Article 14(5) of Directive (EU) 2016/798 on the validity throughout the Union should also apply to those voluntary certificates.
(10) As part of their activities, infrastructure managers may need to use trains, infrastructure inspection vehicles, on-track machines or other special vehicles for different purposes, such as transporting materials or staff for construction or infrastructure maintenance, performing maintenance on its infrastructure assets or managing emergency situations. In such situations, the infrastructure manager should be deemed to operate in the capacity of a railway undertaking under its safety management system. Assessing the infrastructure manager's capacity to operate vehicles for this purpose should be part of its assessment for a safety authorisation under Article 12 of Directive (EU) 2016/798.
(11) The assessment by a certification body of an application for an ECM certificate is an assessment of the applicant's ability to manage maintenance activities and to deliver the operational functions of maintenance either by itself or through contracts with other bodies, such as maintenance workshops, charged with delivering those functions or parts of those functions.
(12) In accordance with Article 14(4) of Directive (EU) 2016/798, the certification bodies are accredited bodies, recognised bodies or the national safety authorities. A system of accreditation should provide a tool for managing risks by assuring that accredited bodies are competent to carry out the work they undertake. Furthermore, accreditation is a means to secure national and international recognition of ECM certificates issued by accredited bodies.
(13) In order to have a system allowing certification bodies to perform checks on certified entities in charge of maintenance across the Union and to harmonise approaches to certification, it is important that all bodies able to award certificates to any entity in charge of maintenance (‘certification bodies’) cooperate with one another. Specific requirements for accreditation and recognition are to be developed and approved in accordance with Chapter II of Regulation (EC) No 765/2008 of the European Parliament and of the Council(4).
(14) Performance, organisation and decision-making procedures in the field of railway safety and interoperability vary substantially among the entities in charge of maintenance, with a detrimental effect on the smooth operation of the single European railway area. In particular, small and medium-sized enterprises wishing to enter the railway market in another Member State might be negatively affected by that. Therefore, strengthened coordination with a view to greater harmonisation at Union level is essential. In order to ensure that the entities in charge of maintenance and the certification bodies implement and apply consistently the different provisions of this Regulation, the European Union Agency for Railways (‘the Agency’) should, within its powers to monitor the overall safety performance of the Union rail system referred to in Article 35 of Regulation (EU) 2016/796 of the European Parliament and of the Council(5), monitor the activities of the certification bodies through audit and inspections. To be able to perform this function, the Agency should collect information on the nature of the certification bodies active in that field and the number of certificates issued to entities in charge of maintenance. It is also important for the Agency to facilitate coordination of the certification bodies.
(15) Pending the full application of the certification system of the entity in charge of maintenance provided for in this Regulation, the existing practices to certify entities in charge of maintenance and maintenance workshops for vehicles other than freight wagons should remain valid during a period of transition in order to ensure the uninterrupted provision of rail operation services, in particular at international level.
(16) This Regulation provides for a system of certification for all types of vehicles, including freight wagons. Therefore, Commission Regulation (EU) No 445/2011(6) should be repealed.
(17) The measures provided for in this Regulation are in accordance with the opinion of the Committee referred to in Article 28(1) of Directive (EU) 2016/798,
HAS ADOPTED THIS REGULATION:
1.This Regulation establishes a system of certification of entities in charge of maintenance (‘ECM certificate’) including the maintenance functions described in Article 14(3) of Directive (EU) 2016/798.
2.It applies to all vehicles, and introduces the possibility for certification of outsourced maintenance functions.
3.This Regulation sets out the requirements to be met by the entities in charge of maintenance concerning the management of safety-critical components.
For the purposes of this Regulation, the following definitions shall apply:
‘accreditation’ means accreditation as defined in Article 2(10) of Regulation (EC) No 765/2008;
‘certification body’ means a body, responsible for the certification of entities in charge of maintenance or for certification of the entity or organisation that fulfil maintenance functions referred to in points (b), (c) or (d) of Article 14(3) of Directive (EU) 2016/798, or parts of those functions;
‘release to service’ means the justified and recorded assurance, accompanied by documentation where appropriate, given by the entity delivering the maintenance to the fleet-maintenance manager that maintenance has been delivered according to the maintenance orders;
‘return to operation’ means a notice given to the user, such as a railway undertaking or a keeper, by the entity in charge of maintenance, based on a release to service, assuring that all appropriate maintenance works have been completed and the vehicle, previously removed from operation, is in a condition to be used safely, possibly subject to restrictions of use;
The definition of ‘safety-critical component’ provided for in section 4.2.12.1 of Annex to Commission Regulation (EU) No 1302/2014(7) shall apply.
1.Without prejudice to Article 15(1) of Directive (EU) 2016/798, any entity in charge of maintenance shall satisfy the requirements of Annex II, in respect of all vehicles subject to Directive (EU) 2016/798.
2.An ECM certification establishing compliance with the requirements of Annex II shall be mandatory for any entity in charge of maintenance:
(a)responsible for the maintenance of freight wagons, or
(b)which is not a railway undertaking or an infrastructure manager maintaining vehicles exclusively for its own operations.
3.Any entity in charge of maintenance of vehicles other than those mentioned in paragraph 2, may apply for ECM certification.
4.Compliance with Annex II shall be demonstrated either through an ECM certification or, without prejudice to paragraph 2, in case of railway undertakings through the process of safety certification or in case of infrastructure managers through the process of safety authorisation.
5.The ECM certificate granted to a railway undertaking or an infrastructure manager shall be deemed evidence of compliance with points 5.2.4 and 5.2.5 both of Annex I and Annex II to Commission Delegated Regulation (EU) 2018/762(8) as regards maintenance of vehicles.
1.For managing safety-critical components, the entity in charge of maintenance shall take into account the initial identification of safety-critical components by the manufacturer of the vehicle together with any specific maintenance instructions recorded in the technical files of subsystems referred to in Article 15(4) of Directive (EU) 2016/797.
2.The entity in charge of maintenance shall, either directly or via the keeper provide information to the railway undertakings and infrastructure managers operating the vehicles, keepers, manufacturers, holders of vehicles authorisations and holders of the type authorisation of vehicles, subsystems or components, as most appropriate and shall in particular, inform them of exceptional maintenance findings beyond wear and tear.
3.Where during the maintenance of a vehicle an entity in charge of maintenance becomes aware of evidence suggesting a component not previously identified as safety critical should be considered as such, it shall inform the manufacturer, the holder of the vehicle type authorisation and the holder of the vehicle authorisation without delay.
4.To confirm if the component is safety critical the manufacturer, when it can be identified, shall perform a risk assessment. It shall take into account the component's intended use and the environment in which it is intended to be used. As appropriate, the entity in charge of maintenance shall adjust its maintenance procedures to ensure monitoring and the safe maintenance of the component.
5.Safety critical components including those identified under paragraph 4 above, shall be recorded in and managed through the relevant vehicle documentation as follows:
(a)manufacturers shall manage information on safety critical components and appropriate maintenance instructions related to them through reference in the technical file of subsystems referred to in Article 15(4) of Directive (EU) 2016/797; and
(b)entities in charge of maintenance shall manage safety critical components and appropriate maintenance instructions as well as relevant maintenance activities in the maintenance file or documentation referred to in Article 14 of Directive (EU) 2016/798.
6.The entity in charge of maintenance shall inform the rail sector and the rail supply industry about new or unexpected safety relevant findings including exceptional maintenance findings beyond wear and tear, in relation to vehicles, subsystems or other components, when the related risks are relevant for more actors and are likely to be poorly controlled. The entity in charge of maintenance shall use the Safety Alert IT or another informatics tool provided by the Agency for this purpose.
7.At the request of the entity in charge of maintenance or of the keeper of the vehicle, the manufacturers shall provide technical and engineering support for safety-critical components and their safe integration.
1.The entity in charge of the maintenance of the vehicle shall deliver information on the maintenance of a vehicle, and, where applicable on aspects relevant for the operation to the railway undertakings or infrastructure managers at request, either directly or via the keeper.
2.The railway undertaking or the infrastructure manager shall deliver information on the operation of a vehicle to the entity in charge of maintenance at request, either directly or via the keeper of the vehicle.
3.All parties involved in the maintenance process such as railway undertakings, infrastructure managers, keepers, entities in charge of maintenance, as well as manufacturers of vehicles, subsystems or components, shall exchange relevant information about maintenance in accordance with the criteria listed in Sections I.7 and I.8 of Annex II.
4.Where any involved party, in particular a railway undertaking or an infrastructure manager, has evidence that an entity in charge of maintenance does not comply with Article 14 of Directive (EU) 2016/798 or with the requirements of this Regulation, it shall without delay inform the certification body and the relevant national safety authority thereof. The certification body or, where the entity in charge of maintenance is not certified, the relevant national safety authority shall take appropriate action to check whether the claim of non-compliance is justified.
5.Where there is a change of entity in charge of maintenance, the keeper, in accordance with Article 47(6) of Directive (EU) 2016/797, shall inform without delay the registration entity referred to in Article 4(1) of Commission Decision 2007/756/EC(9) and request the update of the vehicle register. In that situation:
the former entity in charge of maintenance shall without delay deliver the maintenance documentation to the keeper;
the former entity in charge of maintenance shall be relieved of its obligations when it is removed from the vehicle register;
in the absence of a new entity in charge of maintenance the registration of the vehicle shall be suspended.
1.Member States shall provide the Agency with the following information concerning the certification bodies:
name
address
contact details
the nature of their empowerment in accordance with Article 14 of Directive (EU) 2016/798 (accreditation, recognition or if they have taken on the task as the national safety authority)
2.Member States shall inform the Agency about any change in the situation within one month of the occurrence of that change.
3.Member States shall ensure that the certification bodies comply with the general criteria and principles set out in Annex I and with any specific sectoral accreditation schemes laid down by the relevant Union legislation.
4.Member States shall ensure that decisions taken by the certification bodies are subject to judicial review.
5.In order to harmonise approaches to the assessment of applications, the certification bodies shall cooperate with one another both within the Member States and across the Union.
6.The Agency shall organise and facilitate cooperation between the certification bodies.
7.The certification bodies shall deliver an activity report in an electronic form every 3 years to the Agency. The content of such a report shall be defined by the Agency (in collaboration with the certification bodies) and made available on 16 December 2020 and in accordance with any specific sectoral accreditation schemes laid down by the relevant Union legislation. The Agency shall publish the reports on its website.
8.A national safety authority, a national investigation body or the Agency may request information from any certification body on the situation concerning an individual ECM certification. The certification body shall reply within 2 weeks at the latest.
1.The entity in charge of maintenance shall apply for ECM certification to a certification body. It shall use the relevant form in Annex III and provide documentary evidence for the requirements and procedures set out in Annex II. The application shall include the description of the strategy to ensure continued compliance with the requirements set out in Annex II, after the award of the ECM certification, including the compliance with Commission Regulation (EU) No 1078/2012(10).
2.The application for ECM certification may be limited to a specified category of vehicles.
3.The applicant shall submit supplementary information and documentation at the request of the certification body. The timeframe for providing supplementary information shall be reasonable, proportionate to the difficulty of providing the information requested and agreed with the applicant upon request.
4.The certification body shall verify the fulfilment of the requirements set out in Annex II. To that end, it may undertake site visits of the entity in charge of maintenance.
5.The certification body shall take a decision to award or refuse ECM certification at the latest 4 months after all the information and documentation has been received.
6.The certification body shall give the reasons for its decisions. It shall notify its decision to the entity in charge of maintenance, with an indication of the appeal process, the time limit for an appeal and the contact details of the appeal body.
7.The decision to award the ECM certification shall be notified using the relevant form set out in Annex IV.
8.An ECM certification shall be valid for a maximum period of 5 years. The certified entity in charge of maintenance shall inform the certification body of any changes that might have an impact on the validity of its certification without delay.
1.The certification body shall conduct surveillance activities in respect of the entity in charge of maintenance to verify continued compliance with the requirements set out in Annex II. It shall conduct site visits at least once every 12 months. The choice regarding the nature of surveillance activities and sites to be visited shall aim at ensuring overall continuing compliance and shall be based on a geographical and functional balance. It shall take account of previous surveillance activities of the entity in charge of maintenance under surveillance.
2.Where the certification body finds that an entity in charge of maintenance no longer complies with the requirements on the basis of which it issued the ECM certification, it can take one of the following actions:
agree an improvement plan with the entity in charge of maintenance,
decide to limit the scope of the ECM certification,
suspend or revoke the certification, depending on the extent of non-compliance.
3.Where the entity in charge of maintenance does not follow the improvement plan or continues not to comply with the requirements set out in Annex II, the certification body shall decide to limit the scope of or revoke the ECM certification, depending on the extent of non-compliance.
4.In case of revocation of an ECM certification, the entity in charge of the national or European vehicle register shall ensure suspension of the registration of vehicles affected by the revocation, until a new entity in charge of maintenance is registered for the vehicles concerned.
5.Each entity in charge of maintenance shall submit an annual report of its activities to its certification body and make it available to the national safety authority and to the Agency upon request. The requirements for this report are set out in Annex V.
1.One or more of the functions referred to in points (b), (c) and (d) of Article 14(3) of Directive (EU) 2016/798, or parts thereof, may be outsourced and the certification body shall be informed thereof.
2.The entity in charge of maintenance shall demonstrate to the certification body how it complies with all the requirements and assessment criteria set out in Annex II with regard to the functions it decided to outsource.
3.The entity in charge of maintenance shall remain responsible for the outcome of the outsourced maintenance activities and shall establish a system to monitor their performance.
1.A certification may be requested by any entity or organisation taking on one or more maintenance functions as referred to in points (b), (c) and (d) of Article 14(3). Such a certification shall confirm that the maintenance carried out by the entity or organisation concerned of one or more of those functions complies with the relevant requirements set out in Annex II.
2.Certification bodies shall apply the procedures set out in Articles 6, 7, 8 and 13(2) adapted to the particular case of the applicant.
In assessing applications for certification in respect of outsourced maintenance functions or parts thereof, certification bodies shall apply:
(a)the requirements and assessment criteria set out in Section I of Annex II, adapted to the organisation's type and extent of service;
(b)the requirements and assessment criteria describing the specific maintenance function or functions.
If a national safety authority has knowledge that an entity in charge of maintenance does not comply with the requirements of Annex III of Directive (EU) 2016/798 or with the certification requirements of this Regulation, it shall inform the national bodies or authorities responsible for the accreditation or recognition, the Agency, the certification body and other interested parties as appropriate.
The Agency shall support the harmonised system of certification through the provision of:
assistance to national accreditation bodies and to the relevant national authorities recognising the certification bodies;
cooperation on appropriate accreditation and certification schemes. Those schemes shall set out evaluation criteria and procedures to assess compliance of certification bodies with the requirements set out in Annex I (via the European accreditation infrastructure established pursuant to Article 14 of Regulation (EC) No 765/2008).
1.The Agency shall collect, record and publish basic information on certification bodies and certified entities in charge of maintenance. The Agency shall create an IT tool for delivering this task.
2.Certification bodies shall notify the Agency of all issued, amended, renewed, suspended or revoked ECM certifications or of all certifications for functions as referred to in points (b), (c) and (d) of Article 14(3) of Directive (EU) 2016/798, within one week from its decision, using the forms set out in Annex IV.
The Agency shall address to the Commission a first report on the implementation of this Regulation five years following its entry into force. The Agency shall address subsequent reports on the implementation of this Regulation every three years following the first report.
1.Certification bodies accredited or recognised pursuant to Regulation (EU) No 445/2011 shall be deemed accredited or recognised in accordance with this Regulation under the conditions for which those certification bodies have been accredited or recognised.
2.The attestation for an entity in charge of maintenance for vehicles other than freight wagons, issued by the certification body on the basis of national laws, applicable in the field governed by this Regulation, before 16 June 2020 shall be recognised as being equivalent to ECM certification for its original period of validity or at the latest, until 16 June 2023.
3.Attestations of conformity with the principles and criteria equivalent to the requirements of Annex III of Regulation (EU) No 445/2011 issued by a certification body for vehicles other than freight wagons, by 16 June 2019 at the latest, shall be deemed equivalent to ECM certifications issued under this Regulation for their original period of validity or at the latest, until 16 June 2023.
4.Attestations of conformity for outsourced maintenance functions for vehicles other than freight wagons, issued by the certification body by 16 June 2022 at the latest, on the basis of national laws applicable in the field governed by this Regulation before its entry into force shall be deemed equivalent to ECM certifications for outsourced maintenance functions issued under this Regulation for their original period of validity or at the latest, until 16 June 2025.
5.All entities in charge of maintenance for the vehicles referred to in point (b) of Article 3 (2) other than freight wagons and vehicles listed in Article 15(1) of Directive (EU) 2016/798, which are not subject to paragraphs 2 to 4, shall comply with this Regulation by 16 June 2022 at the latest.
Regulation (EU) No 445/2011 is repealed with effect from 16 June 2020.
Certificates issued under Regulation (EU) No 445/2011 by a certification body shall be deemed equivalent to certificates issued under this Regulation for their original period of validity.
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
It shall apply from 16 June 2020.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 16 May 2019.
For the Commission
The President
Jean-Claude Juncker
The certification body shall document its organisational structure, showing the duties, responsibilities and authorities of management and other certification staff and any committees. Where the certification body is a defined part of a legal entity, the structure shall include the line of authority and the relationship to other parts within the same legal entity.
The certification body shall be organisationally and functionally independent in its decision-making from railway undertakings, infrastructure managers, keepers, manufacturers and entities in charge of maintenance and shall not provide similar services.
The independence of the staff responsible for the certification checks shall be guaranteed. No official shall be remunerated on the basis of either the number of checks performed or the results of those checks.
The certification body and the staff deployed shall have the required professional competence, in particular regarding the organisation of the maintenance of vehicles and the appropriate maintenance system. The specific requirements addressing the personnel involved in the management and performance of assessment and in the certification shall be described in the accreditation scheme.
The certification body's decisions shall be based on objective evidence of conformity or non-conformity obtained by the certification body, and shall not be influenced by other interests or by other parties.
The certification body is not responsible for ensuring ongoing conformity with the requirements for certification.
The certification body has the responsibility to assess sufficient objective evidence upon which to base a certification decision.
A certification body shall provide public access to, or disclosure of, appropriate and timely information about its audit process and certification process. It shall also provide information about the certification status (including the granting, extension, maintenance, renewal, suspension, reduction in scope, or withdrawal of certification) of any organisation, in order to develop confidence in the integrity and credibility of certification. Openness is a principle of access to, or disclosure of, appropriate information.
To gain the privileged access to information needed to assess conformity with the requirements for certification adequately, a certification body shall keep confidential any commercial information about a client.
The certification body shall establish a procedure to handle complaints about decisions and other certification-related activities.
The certification body shall be able to demonstrate that it has evaluated the risks arising from its certification activities and that it has adequate arrangements (including insurance or reserves) to cover liabilities arising from its operations in each field of its activities and the geographic areas in which it operates.
The organisation shall have procedures for:
establishing a maintenance policy appropriate to the organisation's type and extent of service and approved by the organisation's chief executive or his or her representative;
ensuring that safety targets are established, in line with the legal framework and consistent with an organisation's type, extent and relevant risks;
assessing its overall safety performance in relation to its corporate safety targets;
developing plans and procedures for reaching its safety targets;
ensuring that the resources needed to perform all processes are available to comply with the requirements of this Annex;
identifying and managing the impact of other management activities on the maintenance system;
ensuring that senior management is aware of the results of performance monitoring and audits and takes overall responsibility for the implementation of changes to the maintenance system;
ensuring that staff and staff representatives are adequately represented and consulted in defining, developing, monitoring and reviewing the safety aspects of all related processes that may involve staff.
the performance of relevant processes;
the results of processes (including all contracted services and products);
the effectiveness of risk control arrangements;
information on experience, malfunctions, defects and repairs arising from day-to-day operation and maintenance.
develop an internal audit plan, which may be revised depending on the results of previous audits and monitoring of performance;
analyse and evaluate the results of the audits;
propose and implement specific corrective measures or actions;
verify the effectiveness of previous measures or actions.
The organisation shall have procedures to ensure that:
identified shortcomings are rectified;
new safety developments are implemented;
internal audit findings are used to bring about improvement in the system;
preventive or corrective actions are implemented, when needed, to ensure compliance of the railway system with standards and other requirements throughout the lifecycle of equipment and operations;
relevant information relating to the investigation and causes of accidents, incidents, near-misses and other dangerous occurrences is used to learn and, where necessary, to adopt measures in order to improve the level of safety;
relevant recommendations from the national safety authority, from the national investigation body and from industry or internal investigations are evaluated and implemented if appropriate;
relevant reports or information from railway undertakings/infrastructure managers, keepers or other relevant sources are considered and taken into account.
the identification of posts with responsibility for performing within the system all the processes necessary for compliance with the requirements of this Annex;
the identification of posts involving safety tasks;
the allocation of staff with the appropriate competence to relevant tasks.
identification of the knowledge, skills and experience required for safety-related tasks as appropriate for the responsibilities;
selection principles, including basic educational level, mental aptitude and physical fitness;
initial training and qualification or certification of acquired competence and skills;
assurance that all staff are aware of the relevance and importance of their activities and how they contribute to the achievement of safety objectives;
ongoing training and periodical updating of existing knowledge and skills;
periodic checks of competence, mental aptitude and physical fitness where appropriate;
special measures in the case of accidents/incidents or long absences from work, as required.
the receipt and processing of specific information;
the identification, generation and dissemination of specific information;
making available reliable and up-to-date information.
relevant and valid;
accurate;
complete;
appropriately updated;
verified;
consistent and easy to understand (including the language used);
made known to staff in accordance with their responsibilities, before it is applied;
easily accessible to staff, with copies provided to them where required.
checks of the accuracy and completeness of national vehicle registers regarding the identification (including means) and registration of the vehicles maintained by the organisation;
maintenance documentation;
information on support provided to keepers and, where appropriate, to other parties, including railway undertakings/infrastructure managers;
information on the qualification of staff and subsequent supervision during maintenance development;
information on operations (including mileage, type and extent of activities, incidents or accidents) and requests of railway undertakings, keepers and infrastructure managers;
records of maintenance performed, including information on deficiencies detected during inspections and corrective actions taken by railway undertakings or by infrastructure managers such as inspections and monitoring undertaken before the departure of the train or en route;
release to service and return to operation;
maintenance orders;
technical information to be provided to railway undertakings/infrastructure managers and keepers for maintenance instructions;
emergency information concerning situations where the safe state of running is impaired, which may consist of:
the imposition of restrictions of use or specific operating conditions for the vehicles maintained by the organisation or other vehicles of the same series even if maintained by other entities in charge of maintenance, whereby this information shall also be shared with all involved parties;
urgent information on safety-related issues identified during maintenance, such as deficiencies detected in a component common to several categories or series of vehicles;
all relevant information or data needed to submit the annual maintenance report to the certification body and to the relevant customers (including keepers), whereby this report shall also be made available upon request to national safety authorities.
regularly monitor and update all relevant documentation;
format, generate, distribute and verify changes to all relevant documentation;
receive, collect and archive all relevant documentation.
contractors, subcontractors and suppliers are competent;
contractors, subcontractors and suppliers have a maintenance and management system that is adequate and documented.
responsibilities and tasks relating to railway safety issues;
obligations relating to the transfer of relevant information between both parties;
the traceability of safety-related documents.
all maintenance activities affecting safety;
all safety-critical components.
ensuring compliance with the specifications related to the basic parameters for interoperability as set out in the relevant technical specifications for interoperability (TSIs);
verifying in all circumstances the consistency of the maintenance file with the authorisation related to the vehicle (including any national safety requirements), including the conformity to the technical file and the type of records as in the European Register of Authorised Types of Vehicles (ERATV);
managing any substitution in the framework of maintenance;
identifying the need for risk assessment of the potential impact of the change in question on the safety of the railway system, by application of the common safety methods related to the risk evaluation and assessment methods as adopted pursuant to point (a) of Article 6(1) of Directive (EU) 2016/798;
managing the configuration of all technical changes affecting the system integrity of the vehicle.
obtain access to the recommendations for maintenance of the initial documentation and to collect sufficient information on planned operations;
analyse those recommendations for maintenance of the initial documentation and to provide, by application of the common safety methods related to the risk evaluation and assessment methods as adopted pursuant to point (a) of Article 6(1) of Directive (EU) 2016/798, the first maintenance file, also taking into account the information contained in any associated guarantees;
ensure that the implementation of the first maintenance file is done accordingly.
collect at least the relevant information in relation to:
the type and extent of operations effectively performed, including, but not limited to accidents, serious accidents and incidents, as defined in Directive (EU) 2016/798;
the detected failures on components;
the type and extent of operations planned;
the maintenance effectively performed.
define the need for updates, taking into account the limit values for interoperability;
make proposals for and approve changes and their implementation, with a view to a decision based on clear criteria, taking into account the findings from risk assessment performed by application of the common safety methods related to the risk evaluation and assessment methods as adopted pursuant to point (a) of Article 6(1) of Directive (EU) 2016/798;
ensure that the implementation of changes is done accordingly;
monitor the effectiveness of the changes through a process in consistency with the methods for assessing the safety level and the safety performance of railway operators at national and Union level as adopted pursuant to point (d) of Article 6(1) of Directive (EU) 2016/798.
application of the common safety methods related to the risk evaluation and assessment methods as adopted pursuant to point (a) of Article 6(1) of Directive (EU) 2016/798 for assessment of changes of the maintenance file;
engineering disciplines required for managing the establishment and the changes of the maintenance file and the development, assessment, validation and approval of substitutions in the framework of maintenance;
maintenance activities on safety-critical components;
joining techniques (including welding and bonding);
non-destructive testing.
the documentation relating to the development, assessment, validation and approval of a substitution in the framework of maintenance;
the configuration of vehicles, including, but not limited to, safety-critical components and on-board software modifications;
records of the maintenance performed;
results of studies concerning return on experience;
all the successive versions of the maintenance file, including risk assessment;
reports on the competence and supervision of maintenance delivery and fleet maintenance management;
technical information to be provided to support keepers, railway undertakings and infrastructure managers.
applicable rules and technical specifications;
the maintenance plan for each vehicle;
a list of spare parts, including a sufficiently detailed technical description of each part to allow like-for-like replacement with the same guarantees;
a list of materials, including a sufficiently detailed description of their use and the necessary health and safety information;
a dossier that defines the specifications for activities affecting safety and contains intervention and in-use restrictions for components;
a list of components or systems subject to legal requirements and a list of those requirements (including brake reservoirs and tanks for the transport of dangerous goods);
application of the common safety methods related to the risk evaluation and assessment methods as adopted pursuant to point (a) of Article 6(1) of Directive (EU) 2016/798 for assessing changes affecting the fleet maintenance management function.
maintenance orders;
return to operation, including restrictions on use relevant to railway undertakings and infrastructure managers.
check the completeness and appropriateness of the information delivered by the fleet maintenance management function in relation to the activities ordered;
verify the use of the required, relevant maintenance documents and other standards applicable to the delivery of maintenance services in accordance with maintenance orders;
ensure that all relevant maintenance specifications, as defined in applicable regulations and specified standards contained in the maintenance orders, are available to all involved staff (e.g. they are contained in internal working instructions).
components (including spare parts) and materials are used as specified in the maintenance orders and supplier documentation;
components and materials are stored, handled and transported in a manner that prevents wear and damage and as specified in the maintenance orders and supplier documentation;
all components and materials, including those provided by the customer, comply with relevant national and international rules as well as with the requirements of relevant maintenance orders.
the safe delivery of maintenance, including the health and safety of maintenance staff;
ergonomics and health protection, also including the interfaces between users and information technology systems or diagnostic equipment.
calibrated or verified at specified intervals, or prior to use, against international, national or industrial measurement standards — where no such standards exist, the basis used for calibration or verification shall be recorded;
adjusted or re-adjusted as necessary;
identified to enable the calibration status to be determined;
safeguarded from adjustments that would invalidate the measurement result;
protected from damage and deterioration during handling, maintenance and storage.
joining techniques (including welding and bonding);
non-destructive testing;
final vehicle testing and release to service;
maintenance activities on brake systems, wheel sets and draw gear and maintenance activities on specific components of freight wagons for the transport of dangerous goods, such as tanks, valves, etc.;
maintenance activities on safety-critical components;
maintenance activities on control-command and signalisation systems;
maintenance activities on door control systems;
other identified specialist areas affecting safety.
works performed in accordance with the maintenance orders;
any possible fault or defect regarding safety which is identified by the organisation;
the release to service.
clear identification of all facilities, equipment and tools;
all maintenance works performed, including personnel, tools, equipment, spare parts and materials used and taking into account:
relevant national rules where the organisation is established;
requirements laid down in the maintenance orders, including requirements regarding records;
final testing and the decision regarding the release to service;
the control measures required by maintenance orders and the release to service;
the results of calibration and verification, whereby, for computer software used in the monitoring and measurement of specified requirements, the ability of the software to perform the desired task shall be confirmed prior to initial use and reconfirmed as necessary;
the validity of the previous measuring results when a measuring instrument is found not to conform to requirements.
explanations and justification on how non-conformities have been addressed or solved, or both;
information on the volume of maintenance carried out during the prevailing period;
the feedback on experience in applying the common safety methods related to the risk evaluation and assessment as adopted pursuant to point (a) of Article 6(1) of Directive (EU) 2016/798 and to the methods for monitoring to be applied by railway undertakings, infrastructure managers and entities in charge of maintenance as adopted pursuant to point (c) of Article 6(1) of that Directive;
changes related to:
legal ownership of the company;
organisation (procedures in place);
vehicles for which the entity is in charge of maintenance;
sites and contractors including processes and equipment;
the balance between internal and external activities related to the three maintenance functions (maintenance development, fleet maintenance and maintenance delivery);
contractual arrangements with users (including the keepers and the exchange of data);
the maintenance system;
defects and failures of components related to safety, referred to in Section II of Annex II, and relevant information about maintenance exchanged pursuant to Article 5(3);
internal audit reports;
the agency, national safety authorities and other authorities enforcement actions or investigations including claims in accordance with Articles 8 and 12 of this legal act;
competence management.
Commission Regulation (EU) No 445/2011 of 10 May 2011 on a system of certification of entities in charge of maintenance for freight wagons and amending Regulation (EC) No 653/2007 (OJ L 122, 11.5.2011, p. 22)
Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (OJ L 138, 26.5.2016, p. 44).
Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 (OJ L 218, 13.8.2008, p. 30).
Regulation (EU) 2016/796 of the European Parliament and of the Council of 11 May 2016 on the European Union Agency for Railways and repealing Regulation (EC) No 881/2004 (OJ L 138, 26.5.2016, p. 1–43)
Commission Regulation (EU) No 445/2011 of 10 May 2011 on a system of certification of entities in charge of maintenance for freight wagons and amending Regulation (EC) No 653/2007 (OJ L 122, 11.5.2011, p. 22).
Commission Regulation (EU) No 1302/2014 of 18 November 2014 concerning a technical specification for interoperability relating to ‘rolling stock – locomotives and passengers rolling stock’ subsystem of the rail system in the European Union (OJ L 356, 12.12.2014, p. 228).
Commission Delegated Regulation (EU) 2018/762 of 8 March 2018 establishing common safety methods on safety management system requirements pursuant to Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulations (EU) No 1158/2010 and (EU) No 1169/2010 (OJ L 129, 25.5.2018, p. 26).
Commission Decision 2007/756/EC of 9 November 2007 adopting a common specification of the national vehicle register provided for under Articles 14(4) and (5) of Directives 96/48/EC and 2001/16/EC (OJ L 305, 23.11.2007, p. 30).
Commission Regulation (EU) No 1078/2012 of 16 November 2012 on a common safety method for monitoring to be applied by railway undertakings, infrastructure managers after receiving a safety certificate or safety authorisation and by entities in charge of maintenance (OJ L 320, 17.11.2012, p. 8).
Council Directive 89/391/EEC of 12 June 1989 on the introduction of measures to encourage improvements in the safety and health of workers at work (OJ L 183, 29.6.1989, p. 1).
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys