- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Commission Delegated Regulation (EU) 2020/1749 of 7 October 2020 amending Council Regulation (EC) No 428/2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
[1A001] Components made from fluorinated compounds, as follows:
Seals, gaskets, sealants or fuel bladders, specially designed for "aircraft" or aerospace use, made from more than 50 % by weight of any of the materials specified in 1C009.b. or 1C009.c.;
Not used;
Not used.
[1A002] "Composite" structures or laminates, as follows:
Made from any of the following:
An organic "matrix" and "fibrous or filamentary materials" specified in 1C010.c. or 1C010.d.: or
Prepregs or preforms specified in 1C010.e.;
Made from a metal or carbon "matrix", and any of the following:
Carbon "fibrous or filamentary materials" having all of the following:
A "specific modulus" exceeding 10,15 × 106 m; and
A "specific tensile strength" exceeding 17,7 × 104 m; or
Materials specified in 1C010.c.
An area not exceeding 1 m2;
A length not exceeding 2,5 m; and
A width exceeding 15 mm.
Sporting goods;
Automotive industry;
Machine tool industry;
Medical applications.
Metal heat-treatment furnaces for tempering metals;
Silicon boule production equipment.
[1A003] Manufactures of non-"fusible" aromatic polyimides in film, sheet, tape or ribbon form having any of the following:
A thickness exceeding 0,254 mm; or
Coated or laminated with carbon, graphite, metals or magnetic substances.
[1A004] Protective and detection equipment and components not specially designed for military use, as follows:
Full face masks, filter canisters and decontamination equipment therefor, designed or modified for defence against any of the following, and specially designed components therefor:
For the purposes of 1A004.a.:
Full face masks are also known as gas masks.
Filter canisters include filter cartridges.
"Biological agents";
‘Radioactive materials’;
Chemical warfare (CW) agents; or
"Riot control agents", including:
α-Bromobenzeneacetonitrile, (Bromobenzyl cyanide) (CA) (CAS 5798-79-8);
[(2-Chlorophenyl) methylene] propanedinitrile, (o-Chlorobenzylidenemalononitrile) (CS) (CAS 2698-41-1);
2-Chloro-1-phenylethanone, Phenylacyl chloride (ω-chloroacetophenone) (CN) (CAS 532-27-4);
Dibenz-(b,f)-1,4-oxazephine (CR) (CAS 257-07-8);
10-Chloro-5,10-dihydrophenarsazine, (Phenarsazine chloride), (Adamsite), (DM) (CAS 578-94-9);
N-Nonanoylmorpholine, (MPA) (CAS 5299-64-9);
Protective suits, gloves and shoes, specially designed or modified for defence against any of the following:
"Biological agents";
‘Radioactive materials’; or
Chemical warfare (CW) agents;
Detection systems, specially designed or modified for detection or identification of any of the following, and specially designed components therefor:
"Biological agents";
‘Radioactive materials’; or
Chemical warfare (CW) agents.
Electronic equipment designed for automatically detecting or identifying the presence of "explosives" residues and utilising ‘trace detection’ techniques (e.g., surface acoustic wave, ion mobility spectrometry, differential mobility spectrometry, mass spectrometry).
‘Trace detection’ is defined as the capability to detect less than 1 ppm vapour, or 1 mg solid or liquid.
Personal radiation monitoring dosimeters;
Occupational health or safety equipment limited by design or function to protect against hazards specific to residential safety or civil industries, including:
mining;
quarrying;
agriculture;
pharmaceutical;
medical;
veterinary;
environmental;
waste management;
food industry.
[1A005] Body armour and components therefor, as follows:
Soft body armour not manufactured to military standards or specifications, or to their equivalents, and specially designed components therefor;
Hard body armour plates providing ballistic protection equal to or less than level IIIA (NIJ 0101.06, July 2008), or "equivalent standards".
[1A006] Equipment, specially designed or modified for the disposal of Improvised Explosive Devices (IEDs), as follows, and specially designed components and accessories therefor:
Remotely operated vehicles;
‘Disruptors’.
For the purposes of 1A006.b. ‘disruptors’ are devices specially designed for the purpose of preventing the operation of an explosive device by projecting a liquid, solid or frangible projectile.
[1A007] Equipment and devices, specially designed to initiate charges and devices containing "energetic materials", by electrical means, as follows:
Explosive detonator firing sets designed to drive explosive detonators specified in 1A007.b.;
Electrically driven explosive detonators as follows:
Exploding bridge (EB);
Exploding bridge wire (EBW);
Slapper;
Exploding foil initiators (EFI).
[1A008] Charges, devices and components, as follows:
‘Shaped charges’ having all of the following:
Net Explosive Quantity (NEQ) greater than 90 g; and
Outer casing diameter equal to or greater than 75 mm;
Linear shaped cutting charges having all of the following, and specially designed components therefor:
An explosive load greater than 40 g/m; and
A width of 10 mm or more;
Detonating cord with explosive core load greater than 64 g/m;
Cutters, other than those specified in 1A008.b., and severing tools, having a Net Explosive Quantity (NEQ) greater than 3,5 kg.
‘Shaped charges’ are explosive charges shaped to focus the effects of the explosive blast.
[1A102] Resaturated pyrolized carbon-carbon components designed for space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.
[1A202] Composite structures, other than those specified in 1A002, in the form of tubes and having both of the following characteristics:
An inside diameter of between 75 mm and 400 mm; and
Made with any of the "fibrous or filamentary materials" specified in 1C010.a. or b. or 1C210.a. or with carbon prepreg materials specified in 1C210.c.
[1A225] Platinized catalysts specially designed or prepared for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water.
[1A226] Specialized packings which may be used in separating heavy water from ordinary water, having both of the following characteristics:
Made of phosphor bronze mesh chemically treated to improve wettability; and
Designed to be used in vacuum distillation towers.
[1A227] High-density (lead glass or other) radiation shielding windows, having all of the following characteristics, and specially designed frames therefor:
A ‘cold area’ greater than 0,09 m2;
A density greater than 3 g/cm3; and
A thickness of 100 mm or greater.
In 1A227 the term ‘cold area’ means the viewing area of the window exposed to the lowest level of radiation in the design application.
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys