Chwilio Deddfwriaeth

The Plant Health (Wood and Bark) Order (Northern Ireland) 2006

Changes over time for: The Plant Health (Wood and Bark) Order (Northern Ireland) 2006 (Schedules only)

 Help about opening options

Version Superseded: 07/05/2019

Status:

Point in time view as at 27/03/2015.

Changes to legislation:

There are currently no known outstanding effects for the The Plant Health (Wood and Bark) Order (Northern Ireland) 2006. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Articles 4(1), 11(2),17(1), 18(1), 22(4), 26(7), 29(5), 30(2), 37(2), 38(2), 39(2).

SCHEDULE 1N.I.Pests which shall not be landed in or spread within Northern Ireland

Commencement Information

I1Sch. 1 in operation at 31.3.2006, see art. 1

Insects, mites and nematodes

1.Acleris spp. (non-European), for example the Blackheaded Budworm
[F11a. Agrilus anxius Gory, the Bronze Birch Borer]
[F11b. Agrilus planipennis Fairmaire, the Emerald Ash Borer
2.Anoplophora glabripennis (Motschulsky), an Asian Longhorn Beetle
3.Arrhenodes minutus (Drury), the Oak Timberworm
[F23a] Bursaphelenchus xylophilus (Steiner and Buhrer) Nickle et al., the Pine Wood Nematode
4.Choristoneura spp. (non-European), for example, the Western Spruce Budworm
[F34a Dendrolimus sibericus Tschetverikov, the Siberian Coniferous Silk Moth]
5.Monochamus spp. (non-European), Sawyer Beetles
6.Pseudopityophthorus minutissimus (Zimmermann), an Oak Bark Beetle
7.Pseudopityophthorus pruinosus (Eichhoff), an Oak Bark Beetle
8.Scaphoideus luteolus (Van Duzee), the White-banded Elm Leaf Hopper
9.Xiphinema americanum Cobb sensu lato (non-European populations), an American Dagger Nematode
10.Xiphinema californicum Mlamberti and Bleve Zacheo-an American Dagger Nematode

Fungi

1.Ceratocystis fagacearum (Bretz) Hunt, the cause of Oak Wilt
[F41a.Chalara fraxinea T. Kowalski, including its teleomorph Hymenoscyphus pseudoalbidus, a cause of Ash dieback]
2.Chrysomyxa arctostaphyli Dietal, the cause of Spruce Witches Broom Rust
3.Cronartium spp. (non-European), a cause of Conifer Rust
4.Endocronartium spp. (non-European), a cause of Conifer Rust
5.Guignardia laricina (Sawada) Yamamoto and Ito, the cause of Shoot blight of larch
6.Inonotus weirii (Murrill) Kotlaba and Pouzar, the cause of Poria Root Rot
7.Melampsora farlowii (Arthur) Davis, the cause of Hemlock Rust
8.Melampsora medusae Thümen, the cause of Poplar Rust
9.Mycosphaerella larici-leptolepis Ito et al., the cause of Needle Cast of larch
10.Mycosphaerella populorum G E Thompson, a cause of Poplar Canker

Viruses and virus-like organisms

Elm phlöem necrosis mycoplasm

Parasitic plants

Arceuthobium spp. (non-European), the dwarf mistletoe]

Articles 4(1), 11(2), 17(1), 18(1), 22(4), 26(7), 29(5), 30(2), 37(2), 38(2), 39(2)

SCHEDULE 2N.I.Prohibitions on the landing in and movement within Northern Ireland of infected relevant material

PART AN.I.Relevant material which may not be landed in or moved within Northern Ireland if that material is carrying or infected with pests

Commencement Information

I2Sch. 2 Pt. A in operation at 31.3.2006, see art. 1

(1) Item(2) Description of relevant material(3) Pest
F5. . .F5. . .F5. . .
F5. . .F5. . .F5. . .
2.Wood of conifers (Coniferales) retaining any bark; or isolated bark of conifers, in any case originating in any country outside EuropePissodes spp. (non-European), Weevils
3.Wood of conifers (Coniferales) retaining any bark; or isolated bark of conifers, in any case originating in any country outside EuropeScolytidae spp. (non-European), Bark Beetles
4.Wood or isolated bark of Pinus L.Atropellis spp., the cause of Atropellis Canker of pine
5.Wood of Acer saccharum Marsh., including wood which has not kept its natural round surface, in any case originating in the USA or CanadaCeratocystis virescens (Davidson) Moreau, the cause of Sapstreak of maple
6.Wood of Pinus L.Cercoseptoria pini-densiflorae (Hori and Nambu) Deighton, a cause of Needle Blight of pine
7.Wood of Platanus L., including wood which has not kept its natural round surfaceCeratocystis fimbriata f. sp. platani Walter, the cause of Canker Stain of plane
[F68.Wood of Fraxinus L., including wood which has not kept its natural round surfaceChalara fraxinea T. Kowlaski, including its teleomorph Hymenoscyphus pseudoalbidus, a cause of Ash dieback]

N.I.

Commencement Information

I3Sch. 2 Pt. B in operation at 31.3.2006, see art. 1

(1)Item(2)Description of relevant material(3)Pest
1.Wood of conifers (Coniferales) retaining any bark; or isolated bark of conifers.Ips amitinus (Eichoff), the Smaller Eight-toothed Spruce Bark Beetle
2.Wood of conifers (Coniferales) retaining any bark; or isolated bark of conifers.Ips cembrae (Heer), the Large Larch Bark Beetle
3.Wood of conifers (Coniferales) retaining any bark; or isolated bark of conifers.Ips duplicatus (Sahlberg), the Northern Spruce Bark Beetle
4.Wood of conifers (Coniferales) retaining any bark; or isolated bark of conifers.

Ips typographus (Heer), the Larger Eight-toothed Spruce

Bark Beetle

5.Wood of conifers (Coniferales) retaining any bark; or isolated bark of conifers.

Ips sexdentatus (Börner)

Six-toothed Bark Beetle

6.Wood of conifers (Coniferales) retaining any bark, isolated bark of conifers.Dendroctonus micans (Kugelan), the Great Spruce Bark Beetle
7.Wood, other than wood which is bark-free, of Castanea Mill., or isolated bark of Castanea Mill.Cryphonectria parasitica (Murrill) Barr, the cause of Sweet Chestnut Blight

Articles 4(1), 17(1), 38(2)

SCHEDULE 3N.I.Relevant material which may not be landed in Northern Ireland if that material originates in certain third countries

Commencement Information

I4Sch. 3 in operation at 31.3.2006, see art. 1

(1) Item(2) Description of relevant material(3) Countries of origin
1.Isolated bark of Castanea Mill.Any third country other than Switzerland
2.Isolated bark of Quercus L., other than Quercus suber L.Any country in North America
3.Isolated bark of Acer saccharum Marsh.Any country in North America
4.Isolated bark of Populus L.Any country in the American continent

Articles 2(1),4(1),5(2),11(2),14(4),17(1)

SCHEDULE 4N.I.Restrictions on the landing in and movement within Northern Ireland of relevant material

PART AN.I.Relevant material, from third countries, which may only be landed in Northern Ireland if special requirements are satisfied

Commencement Information

I5Sch. 4 Pt. A in operation at 31.3.2006, see art. 1

(1) Item(2) Description of relevant material(3) Requirements of landing
[F71.

Wood of conifers (Coniferales), except that of Thuja L. or Taxus L., other than in the form of :

  • chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from these conifers,

  • wood packaging material, except associated controlled dunnage,

  • wood of Libocedrus decurrens Torr. where there is evidence that the wood has been processed or manufactured for pencils using heat treatment to achieve a minimum temperature of 82°C for a seven to eight day period,

but including that which has not kept its natural round surface, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Buhrer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that:

(a) it has undergone an appropriate heat treatment to achieve a minimum temperature of 56°C for a minimum duration of 30 continuous minutes throughout the entire profile of the wood (including at its core) and there shall be evidence of that heat treatment by a mark “HT” put on the wood or on any wrapping in accordance with current usage and on the phytosanitary certificate or phytosanitary certificate for re-export; and

(b) subsequent to its treatment the wood was transported, until leaving the country issuing that statement outside of the flight season of the vector Monochamus, taking into account a safety margin of four additional weeks at the beginning and at the end of the expected flight season or, except in the case of wood free from any bark, with a protective covering ensuring that infestation with Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. or its vector cannot occur]

[F72.Wood of conifers (Coniferales) in the form of chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from these conifers, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that:

(a) it has undergone an appropriate heat treatment to achieve a minimum temperature of 56°C for a minimum duration of 30 continuous minutes throughout the entire profile of the wood (including at its core) the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export; and

(b) subsequent to its treatment the wood was transported, until leaving the country issuing that statement, outside of the flight season of the vector Monochamus, taking into account a safety margin of four additional weeks at the beginning and at the end of the expected flight season or, except in the case of wood free from any bark, with a protective covering ensuring that infestation with Bursaphelencus xylophilus (Steiner et Bührer) Nickle et al. or its vector cannot occur

[F73.

Wood of Thuja L. or Taxus L., other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or part from these conifers,

  • wood packaging material, except associated controlled dunnage,

but including wood which has not kept its natural round surface, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a) is bark-free;

(b) has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage; or

(c) has undergone an appropriate heat treatment to achieve a minimum temperature of 56°C for a minimum duration of 30 continuous minutes throughout the entire profile of the wood (including at its core) and there shall be evidence of that treatment by a mark “HT” put on the wood or on any wrapping in accordance with current usage and on the phytosanitary certificate or phytosanitary certificate for re-export

F8. . .F8. . .F8. . .
[F95.

Wood of conifers (Coniferales), other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or part from these conifers,

  • wood packaging material, except associated controlled dunnage,

but including that which has not kept its natural round surface, originating in Russia, Kazakhstan or Turkey

The wood shall be accompanied by an official statement that it:

(a) originates in an area or areas known to be free from:

  • Monochamus spp. (non-European)

  • Pissodes spp. (non-European)

  • Scolytidae spp. (non-European),

and the area or areas shall be mentioned on the phytosanitary certificate or phytosanitary certificate for re-export under the rubric “place of origin”;

(b) is bark-free and free from grub holes, caused by the genus Monochamus spp. (non-European), defined for this purpose as those which are larger than 3mm across;

(c) has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage; or

(d) has undergone an appropriate heat treatment to achieve a minimum temperature of 56°C for a minimum duration of 30 continuous minutes throughout the entire profile of the wood (including at its core) and there shall be evidence of that treatment by a mark “HT” put on the wood or on any wrapping in accordance with current usage and on the phytosanitary certificate or phytosanitary certificate for re-export]

[F96.

Wood of conifers (Coniferales), other than in the form of:

  • chips, particles, sawdust, shavings, wood waste and scrap obtained in whole or part from these conifers,

  • wood packaging material, except associated controlled dunnage, but including that which has not kept its natural round surface, originating in any third country other than:

  • Russia, Kazakhstan or Turkey;

  • a European country;

  • Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a) is bark-free and free from grub holes caused by the genus Monochamus spp. (non-European) defined for this purpose as those which are larger than 3mm across;

(b) has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage; or

(c) has undergone an appropriate heat treatment to achieve a minimum temperature of 56°C for a minimum duration of 30 continuous minutes throughout the entire profile of the wood (including at its core), and there shall be evidence of that treatment by a mark “HT” put on the wood or on any wrapping in accordance with current usage and on the phytosanitary certificate or phytosanitary certificate for re-export

7.

Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from conifers (Coniferales), originating in:

Russia, Kazakhstan or Turkey, or

non-European countries other than Canada, China, Japan, the Republic of Korea, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

originates in an area or areas known to be free from—

(i)

Monochamus spp. (non-European),

(ii)

Pissodes spp. (non-European),

(iii)

Scolytidae spp. (non-European),

and that area shall be mentioned in the phytosanitary certificate or phytosanitary certificate for re-export under the rubric “place of origin”;

(b)

has been produced from debarked round wood;

(c)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved though an appropriate time/temperature schedule; or

(d)

[F10has undergone an appropriate heat treatment to achieve a minimum temperature of 56°C for a minimum duration of 30 continuous minutes throughout the entire profile of the wood (including at its core), the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export]

[F118.

Wood packaging material, except:

- raw wood of 6mm thickness or less,

- processed wood produced by glue, heat or pressure or a combination thereof, or

- dunnage which is associated controlled dunnage for the purposes of items 1, 3, 5, 6, 9, 10a, 11, 12a or 13 of Part A of Schedule 4,

coming from any third country, except Switzerland

The wood packaging material shall:

(a) be subject to one of the approved treatments as specified in Annex I to ISPM No. 15; and

(b) display a mark as specified in Annex II to ISPM No. 15, indicating that it has been subjected to an approved phytosanitary treatment in accordance with this standard]

[F119.

Wood of Acer saccharum Marsh., including wood which has not kept its natural round surface, other than in the form of:

-wood intended for the production of veneer sheets,

-chips, particles, sawdust, shavings, wood waste or scrap, or

-wood packaging material, except associated controlled dunnage,

originating in the USA or Canada

The wood shall be accompanied by an official statement that it has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage
10.Wood of Acer saccharum Marsh., intended for the production of veneer sheets, originating in the USA or CanadaThe wood shall be accompanied by an official statement that it originates in an area or areas known to be free from Ceratocystis virescens (Davidson) Moreau and is intended for the production of veneer sheets
[F1210a.

Wood of Fraxinus L., Juglans ailantifolia Carr., Juglans mandshurcia Maxim., Ulmus davidiana Planch or Pterocarya rhoifolia Siebold & Zucc., other than in the form of:

- chips, particles, sawdust, shavings, wood waste or scrap, obtained in whole or part from these trees; or

- wood packaging material, except associated controlled dunnage,

but including wood which has not kept its natural round surface, furniture or other objects made of untreated wood, originating in Canada, China, Democratic People’s Republic of Korea, Japan, Mongolia, Republic of Korea, Russia, Taiwan or the USA

The wood shall be accompanied by an official statement that:

(a) its bark and at least 2.5 cm of the outer sapwood have been removed in a facility authorised and supervised by the national plant protection organisation; or

(b) the wood has undergone ionizing irradiation to achieve a minimum absorbed dose of 1 kGy throughout the wood]

[F1211.

Wood of Quercus L., other than in the form of :

- chips, particles, sawdust, shavings, wood waste or scrap;

- casks, barrels, vats, tubs or other coopers’ products or parts thereof, of wood, including staves, where there is documented evidence that the wood has been produced or manufactured using heat treatment to achieve a minimum temperature of 176°C for 20 minutes; or

- wood packaging material, except associated controlled dunnage, but including wood which has not kept its natural round surface, originating in the USA

The wood shall be accompanied by an official statement that it:

(a) is squared so as to remove entirely the rounded surface;

(b) is bark-free and the water content is less than 20% expressed as a percentage of the dry matter;

(c) is bark-free and has been disinfected by an appropriate hot-air or hot water treatment; or

(d) in the case of sawn wood, with or without residual bark attached, has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage

[F1312.Wood of Platanus L., other than in the form of chips, particles, sawdust, shavings, wood waste or scrap, but including wood which has not kept its natural round surface, originating in Armenia, Switzerland or the USAThe wood shall be accompanied by an official statement that it has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage]
[F1312a.

Wood of Betula L., other than in the form of:

- chips, particles, sawdust, shavings, wood waste or scrap, obtained in whole or part from these trees; or

- wood packaging material, except associated controlled dunnage,

but including wood which has not kept its natural round surface, furniture or other objects made of untreated wood, originating in Canada or the USA where Agrilus anxius Gory is known to occur

The wood shall be accompanied by an official statement that:

(a) its bark and at least 2.5cm of the outer sapwood have been removed in a facility authorised and supervised by the national plant protection organisation; or

(b) the wood has undergone ionizing irradiation to achieve a minimum absorbed dose of 1 kGy throughout the wood

[F1313.

Wood of Populus L., other than in the form of:

- chips, particles, sawdust, shavings, wood waste or scrap;

- wood packaging material, except associated controlled dunnage,

but including wood which has not kept its natural round surface, originating in any country of the American continent

The wood shall be accompanied by an official statement that it:

(a) is bark-free; or

(b) has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage

[F1414.

Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap, obtained in whole or in part from:

- Acer saccharum Marsh., originating in the USA or Canada, or

- Populus L., originating in any country of the American continent

The wood shall be accompanied by an official statement that it:

(a) has been produced from debarked round wood;

(b) has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule; or

(c) has undergone an appropriate heat treatment to achieve a minimum temperature of 56°C for a minimum duration for 30 continuous minutes throughout the entire profile of the wood (including at its core), the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export]

[F1514a.Wood in the form of chips, particles, sawdust, shavings, wood waste and scrap obtained in whole or in part from Fraxinus L., Juglans ailantifolia Carr., Juglans mandshurica Maxim., Ulmus davidiana Planch. and Pterocarya rhoifolia Siebold & Zucc., originating in Canada, China, Democratic People’s Republic of Korea, Japan, Mongolia, Republic of Korea, Russia, Taiwan and USA

The wood shall be accompanied by an official statement that:

(a) it originates in an area recognised as being free from Agrilus planipennis Fairemaire in accordance with the procedure referred to in Article 18(2) of the Directive, the area to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export]

[F1514b.Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap, obtained in whole or in part from Platanus L., originating in Armenia, Switzerland or the USA

The wood shall be accompanied by an official statement that it:

(a) has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter achieved through an appropriate time/temperature schedule; or

(b) has undergone an appropriate heat treatment to achieve a minimum temperature of 56°C for a minimum duration of 30 continuous minutes throughout the entire profile of the wood (including at its core), the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

[F1514c.Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap, obtained in whole or in part from Betula L.The wood shall be accompanied by an official statement that it originates in a country known to be free from Agrilus anxius Gory
15.Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap, obtained in whole or in part from Quercus L. originating in the USA

The wood is accompanied by an official statement that it:

(a)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter achieved through an appropriate time/temperature schedule; or

(b)

[F16has undergone an appropriate heat treatment to achieve a minimum temperature of 56°C for a minimum duration of 30 continuous minutes throughout the entire profile of the wood (including at its core), the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export]

[F1716.Isolated bark of conifers (Conferales), originating in any country outside Europe

The isolated bark shall be accompanied by an official statement that:

(a) it has undergone an appropriate heat treatment to achieve a minimum temperature of 56°C for a minimum duration of 30 continuous minutes throughout the entire profile of the bark (including at its core), the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export; and

(b) subsequent to its treatment the bark was transported until leaving the country issuing that statement outside of the flight season of the vector Monochamus, taking into account a safety margin of four additional weeks at the beginning and at the end of the expected flight season, or with a protective covering ensuring that infestation with Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. or its vector cannot occur]

[F1816aIsolated bark and objects made of bark of Fraxinus L., Juglans ailantifolia Carr., Juglans mandshurica Maxim., Ulmus davidiana Planch. and Pterocarya rhoifolia Siebold & Zucc., originating in Canada, China, Democratic People’s Republic of Korea, Japan, Mongolia, Republic of Korea, Russia, Taiwan and USAThe isolated bark shall be accompanied by an official statement that the bark originates in an area recognised as being free from Agrilus planipennis Fairemaire in accordance with the procedure referred to in Article 18(2) of the Directive, the area to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export]
[F1816b.Bark or objects made out of bark of Betula L., originating in Canada or the USA where Agrilus anxius Gory is known to occurThe bark or objects made out of bark shall be accompanied by an official statement that the bark is free from wood
F19. . .F19. . .F19. . .
[F2018.Wood of Fraxinus L., including wood which has not kept its natural round surface, originating in a third country

The wood shall:

(a)

be accompanied by an official statement that it originates in an area or areas known to be free from Chalara fraxinea T. Kowalski, including its teleomorph Hymenoscyphus pseudoalbidus in accordance with ISPM No. 4; or

(b)

be squared so as to remove entirely the rounded surface; or

(c)

be bark-free and the water content is less than 20% expressed as a percentage of the dry matter; or

(d)

if sawn, with or without residual bark attached, have undergone kiln-drying, to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time / temperature schedule, and there shall be evidence of that kiln-drying by a mark “Kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage]]]]]]]]]]

Textual Amendments

PART BN.I.Relevant material, from another part of the [F21European Union], which may only be landed in or moved within Northern Ireland if special requirements are satisfied

Textual Amendments

Commencement Information

I6Sch. 4 Pt. B in operation at 31.3.2006, see art. 1

(1)Item(2)Description of relevant material(3)Requirements of landing
1.Wood of Platanus L., including wood which has not kept its natural round surface

(a)The wood shall be accompanied by an official statement that it originates in an area or areas known to be free from [F22Ceratocystis platani (J.M. Walter) Engelbr. & T.C. Harr.] ; or

(b)there shall be evidence by a mark “Kiln-dried” or “K.D.” or another internationally recognised mark, put on the wood or on its packaging in accordance with current commercial usage, that it has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, at time of manufacture, achieved through an appropriate time/temperature schedule

[F232.Wood of Fraxinus L., including wood which has not kept its natural round surface

The wood shall:

(a)

be accompanied by an official statement that it originates in an area or areas known to be free from Chalara fraxinea T. Kowalski, including its teleomorph Hymenoscyphus pseudoalbidus in accordance with ISPM No.4; or

(b)

be squared so as to remove entirely the rounded surface; or

(c)

be bark-free and the water content is less than 20% expressed as a percentage of the dry matter; or

(d)

if sawn, with or without residual bark attached, have undergone kiln-drying, to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time / temperature schedule, and there shall be evidence of that kiln-drying by a mark “Kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage]

PART CN.I.Relevant material, from a third country or another part of the [F21European Union], which may only be landed in or moved within Northern Ireland (as a protected zone) if special requirements are satisfied

Commencement Information

I7Sch. 4 Pt. C in operation at 31.3.2006, see art. 1

(1)Item(2)Description of relevant material(3)Requirements of landing
1.Wood of conifers (Coniferales)

Without prejudice to the requirements in items 2, 3, 4, 5 and 6:

(a)

the wood shall be bark-free;

(b)

the wood shall be accompanied by an official statement that it originates in an area or areas known to be free from Dendroctinus micans (Kugelan); or

(c)

there shall be evidence by a mark “Kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on its packaging in accordance with current commercial usage, that it has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, at time of manufacture, achieved through an appropriate time/temperature schedule

2.Wood of conifers (Coniferales)

Without prejudice to the requirements in items 1, 3, 4, 5 and 6:

(a)

the wood shall be bark-free;

(b)

the wood shall be accompanied by an official statement that it originates in an area or areas known to be free from Ips amitinus (Eichhoff); or

(c)

there shall be evidence by a mark “Kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on its packaging in accordance with current commercial usage, that it has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, at time of manufacture, achieved through an appropriate time/temperature schedule

3.Wood of conifers (Coniferales)

Without prejudice to the requirements in items 1, 2, 4, 5 and 6:

(a)

the wood shall be bark-free;

(b)

the wood shall be accompanied by an official statement that it originates in an area or areas known to be free from Ips cembrae (Heer); or

(c)

there shall be evidence by a mark “Kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on its packaging in accordance with current commercial usage, that it has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, at time of manufacture, achieved through an appropriate time/temperature schedule

4.Wood of conifers (Coniferales)

Without prejudice to the requirements in items 1, 2, 3, 5 and 6:

(a)

the wood shall be bark-free;

(b)

the wood shall be accompanied by an official statement that it originates in an area or areas known to be free from Ips duplicatus (Sahlberg); or

(c)

there shall be evidence by a mark “Kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on its packaging in accordance with current commercial usage, that it has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, at time of manufacture, achieved through an appropriate time/temperature schedule

5.Wood of conifers (Coniferales)

Without prejudice to the requirements in items 1, 2, 3, 4 and 6:

(a)

the wood shall be bark-free;

(b)

the wood shall be accompanied by an official statement that it originates in an area or areas known to be free from Ips sexdentatus (Börner); or

(c)

there shall be evidence by a mark “Kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on its packaging in accordance with current commercial usage, that it has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, at time of manufacture, achieved through an appropriate time/temperature schedule

6.Wood of conifers (Coniferales)

Without prejudice to the requirements in items 1, 2, 3, 4 and 5:

(a)

the wood shall be bark-free;

(b)

the wood shall be accompanied by an official statement that it originates in an area or areas known to be free from Ips typographus (Heer); or

(c)

there shall be evidence by a mark “Kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on its packaging in accordance with current commercial usage, that it has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, at time of manufacture, achieved through an appropriate time/temperature schedule

7.Wood of Castanea Mill

The wood:

(a)

shall be bark-free; or

(b)

shall be accompanied by an official statement that it:

(i)

originates in an area or areas known to be free from Cryphonectria parasitica (Murrill.) Barr, or

(ii)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or on any wrapping in accordance with current usage

[F247aWood of Platanus L., including wood which has not kept its natural round surface, originating in the European Union or in Armenia, Switzerland or the USA

The wood shall be accompanied by an official statement that it:

(a) originates in an area free from Ceratocystis platani (J.M. Walter) Engelbr. & T.C. Harr., established in accordance with ISPM No. 4;

(b) has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, at time of manufacture, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or its packaging in accordance with current commercial usage; or

(c) originates in a protected zone which is recognised as a protected zone for the pest mentioned in paragraph (a)]

8.Isolated bark of conifers (Coniferales)

Without prejudice to the requirements in items 9, 10, 11, 12 and 13, the bark shall be accompanied by an official statement that the consignment:

(a)

has been subjected to fumigation or other appropriate treatments against bark beetles; or

(b)

originates in an area or areas known to be free from Dendroctinus micans (Kugelan)

9.Isolated bark of conifers (Coniferales)

Without prejudice to the requirements in items 8, 10, 11, 12 and 13, the bark shall be accompanied by an official statement that the consignment:

(a)

has been subjected to fumigation or other appropriate treatments against bark beetles; or

(b)

originates in an area or areas known to be free from Ips amitinus (Eichhoff)

10.Isolated bark of conifers (Coniferales)

Without prejudice to the requirements in items 8, 9, 11, 12 and 13, the bark shall be accompanied by an official statement that the consignment:

(a)

has been subjected to fumigation or other appropriate treatments against bark beetles; or

(b)

originates in an area or areas known to be free from Ips cembrae (Heer)

11.Isolated bark of conifers (Coniferales)

Without prejudice to the requirements in items 8, 9, 10, 12 and 13, the bark shall be accompanied by an official statement that the consignment:

(a)

has been subjected to fumigation or other appropriate treatments against bark beetles; or

(b)

originates in an area or areas known to be free from Ips duplicatus (Sahlberg)

12.Isolated bark of conifers (Coniferales)

Without prejudice to the requirements in items 8, 9, 10, 11 and 13, the bark shall be accompanied by an official statement that the consignment:

(a)

has been subjected to fumigation or other appropriate treatments against bark beetles; or

(b)

originates in an area or areas known to be free from Ips sexdentatus (Börner)

13.Isolated bark of conifers (Coniferales)

Without prejudice to the requirements in items 8, 9, 10, 11 and 12, the bark shall be accompanied by an official statement that the consignment:

(a)

has been subjected to fumigation or other appropriate treatments against bark beetles; or

(b)

originates in an area or areas known to be free from Ips typographus (Heer)

14.Isolated bark of Castanea MillThe bark shall be accompanied by an official statement that it originates in an area or areas known to be free from Cryphonectria parasitica (Murrill.) Barr]

Article 5(2)

SCHEDULE 5N.I.Relevant material from a third country for which a phytosanitary certificate may be required

PART AN.I.Relevant material which may only be landed in Northern Ireland if accompanied by a phytosanitary certificate

[F251.  Isolated bark of—N.I.

(a)conifers (Coniferales), originating in any country outside Europe;

(b)[F26Acer saccharum Marsh., Populus L., Quercus L., other than Quercus suber L.;

(c)Fraxinus L., Juglans ailantifolia Carr., Juglans mandshurica Maxim., Ulmus davidiana Planch. or Pterocarya rhoifolia Siebold & Zucc., originating in Canada, China, Democratic People’s Republic of Korea, Japan, Mongolia, Republic of Korea, Russia, Taiwan or the USA; or

(d)Betula L., originating in Canada or the USA]

2.  Wood referred to in paragraph (a) or (b) of the definition of “wood” in article 2(1), where it—N.I.

(a)has been obtained in whole or in part from one of the following order, genera or species, except wood packaging material of a description specified in column 2 of item 8 of Part A of Schedule 4—

(i)Quercus L., including wood which has not kept its natural round surface, originating in the USA, except wood in the form of casks, barrels, vats, tubs or other coopers' products or parts thereof including staves and where there is documented evidence that the wood has been processed or manufactured using a heat treatment to achieve a minimum temperature of 176°C for 20 minutes;

(ii)[F27Platanus L., including wood which has not kept its natural round surface, originating in Armenia, Switzerland or the USA;

(iii)Populus L., including wood which has not kept its natural round surface, originating in any country of the American continent;

(iv)Acer saccharum Marsh., including wood which has not kept its natural round surface, originating in the USA or Canada;

(v)Conifers (Coniferales), including wood which has not kept its natural round surface, originating in any country outside Europe, Kazakhstan, Russia or Turkey;

(vi)Fraxinus L., Juglans ailantifolia Carr., Juglans mandshurica Maxim., Ulmus davidiana Planch. or Pterocarya rhoifolia Siebold & Zucc., including wood which has not kept its natural round surface, originating in Canada, China, Democratic People’s Republic of Korea, Japan, Mongolia, Republic of Korea, Russia, Taiwan or the USA; or

(vii)Betula L., including wood which has not kept its natural round surface, originating in Canada or the USA; and]

(b)meets one of the descriptions specified in item 6(b) in Annex V, Part B, Section I of the Directive.]

PART BN.I.Relevant material which, if destined for certain protected zones, may only be landed in Northern Ireland if accompanied by a phytosanitary certificate

1.  Wood referred to in paragraph (a) or (b) of the definition of “wood” in Article 2(1), where it—N.I.

(a)has been obtained in whole or in part from one of the following, except wood packaging of a description specified in column 2 of item 8 in Part A of Schedule 4—

(i)conifers (Coniferales), excluding wood which is bark-free originating in any third country in Europe, or

(ii)Castanea Mill., excluding wood which is bark-free; and

(b)meets one of the descriptions specified in item 7(b) in Annex V, Part B, Section II of the Directive.

Commencement Information

I9Sch. 5 Pt. B para. 1 in operation at 31.3.2006, see art. 1

2.  Isolated bark of conifers (Coniferales) originating in any third country in Europe.N.I.

Commencement Information

I10Sch. 5 Pt. B para. 2 in operation at 31.3.2006, see art. 1

Article 19(1) and (2),and 21(1)

SCHEDULE 6N.I.Prohibitions on the landing in and movement within Northern Ireland of relevant material without a plant passport

PART AN.I.Relevant material, from another part of the E[F21European Union], which may only be landed or moved in Northern Ireland if accompanied by a plant passport

1.  Wood referred to in paragraph (a) or (b) of the definition of “wood” in Article 2(1), where it—N.I.

(a)has been obtained in whole or in part from Platanus L., including wood which has not kept its natural round surface; and

(b)meets one of the descriptions specified in item 1.7(b) in Annex V, Part A, Section I of the Directive.

Commencement Information

I11Sch. 6 Pt. A para. 1 in operation at 31.3.2006, see art. 1

PART BN.I.Relevant material, from another part of the [F21European Union], which may only be landed or moved in Northern Ireland if accompanied by a plant passport which is valid for Northern Ireland (as a protected zone)

1.  Wood referred to in paragraph (a) or (b) of the definition of “wood” in Article 2(1), where it—N.I.

(a)has been obtained in whole or in part from—

(i)conifers (Coniferales), excluding wood which is bark-free;

[F28(ii)Castanea Mill., excluding wood which is bark-free; or

(iii)Platanus L., including wood which has not kept its natural round surface; and]

(b)meets one of the descriptions specified in item 1.10(b) in Annex V, Part A, Section II of the Directive.

2.  Isolated bark of Castanea Mill. or conifers (Coniferales).N.I.

Commencement Information

I13Sch. 6 para. 2 in operation at 31.3.2006, see art. 1

Articles 19(5) and (6)

SCHEDULE 7N.I.Prohibitions on the consignment of relevant material to another part of the [F21European Union] without a plant passport

PART AN.I.Relevant material which may only be consigned to another part of the [F21European Union] if accompanied by a plant passport

1.  Wood referred to in paragraph (a) or (b) of the definition of “wood” in Article 2(1), where it—N.I.

(a)has been obtained in whole or in part from Platanus L., including wood which has not kept its natural round surface; and

(b)meets one of the descriptions specified in item 1.7(b) in Annex V, Part A, Section I of the Directive.

Commencement Information

I14Sch. 7 Pt. A para. 1 in operation at 31.3.2006, see art. 1

PART BN.I.Relevant material which may only be consigned to a protected zone in another part of the [F21European Union] if accompanied by a plant passport which is valid for that protected zone

1.  Wood referred to in paragraph (a) or (b) of the definition of “wood” in Article 2(1), where it—N.I.

(a)has been obtained in whole or in part from—

(i)conifers (Coniferales), excluding wood which is bark-free;

[F29(ii)Castanea Mill., excluding wood which is bark-free; or

(iii)Platanus L., including wood which has not kept its natural round surface; and]

(b)meets one of the descriptions specified in item 1.10(b) in Annex V, Part A, Section II of the Directive.

2.  Isolated bark of Castanea Mill. or conifers (Coniferales).N.I.

Commencement Information

I16Sch. 7 para. 2 in operation at 31.3.2006, see art. 1

Articles 2(1) and 27

SCHEDULE 8N.I.Swiss plant passports

PART AN.I.Relevant material originating in Switzerland which may be landed in or moved within Northern Ireland if accompanied by a Swiss plant passport

1.  Wood referred to in paragraph (a) or (b) of the definition of “wood” in Article 2(1), where it—N.I.

(a)has been obtained in whole or in part from Platanus L., including wood which has not kept its natural round surface; and

(b)meets one of the descriptions specified in item 1.6(b) to Appendix 1, Part A of Annex 4 to the Agreement between the [F21European Union] and the Swiss Confederation on trade in agricultural products attached to the joint Council and Commission Decision(1) on the conclusion of seven agreements with the Swiss Confederation as amended, in so far as the amendments are relevant to this Order, by Commission Decisions 2004/278/EC(2) and 2005/260/EC(3) (“the Agriculture Agreement”).

Textual Amendments

Commencement Information

I17Sch. 8 Pt. A para. 1 in operation at 31.3.2006, see art. 1

PART BN.I.Relevant material imported into Switzerland from another third country which, if it would normally be permitted to be landed in Great Britain if accompanied by a phytosanitary certificate, may be accompanied by a Swiss plant passport(4) or may be landed without phytosanitary documentation(5)

1.  Wood referred to in paragraph (a) or (b) of the definition of “wood” in Article 2(1), where it—N.I.

(a)has been obtained in whole or in part from one of the following order, genera or species, except wood packaging material, other than in the form of raw wood of 6mm thickness or less or wood that has undergone a manufacturing process involving glue, heat or pressure or a combination thereof, originating in a country outside the [F21European Union] or Switzerland—

(i)Quercus L., including wood which has not kept its natural round surface, originating in the USA, except wood in the form of casks, barrels, vats, tubs or other coopers' products or parts thereof including staves and where there is documented evidence that the wood has been processed or manufactured using a heat treatment to achieve a minimum temperature of 176ºC for 20 minutes;

(ii)Platanus L., including wood which has not kept its natural round surface, originating in the USA or Armenia;

(iii)Populus L., including wood which has not kept its natural round surface, originating in any country of the American continent;

(iv)Acer saccarum Marsh., including wood which has not kept its natural round surface, originating in the USA or Canada; or

(v)Conifers (Coniferales), including wood which has not kept its natural round surface, originating in any country outside Europe, Kazakhstan, Russia or Turkey; and

(b)meets one of the descriptions specified in item 6(b) of Appendix 1 to Part B of Annex 4 to the Agriculture Agreement; or

(c)is in the form of —

(i)wood packaging material, other than in the form of raw wood of 6mm thickness or less or wood that has undergone a manufacturing process involving glue, heat or pressure or a combination thereof; or

(ii)dunnage, including that which has not kept its natural round surface, other than in the form of raw wood of 6mm thickness or less or wood that has undergone a manufacturing process involving glue, heat or pressure or a combination thereof.

Textual Amendments

Commencement Information

I18Sch. 8 Pt. B para. 1 in operation at 31.3.2006, see art. 1

2.  Isolated bark of conifers (Coniferales) originating in any country outside Europe.N.I.

Commencement Information

I19Sch. 8 para. 2 in operation at 31.3.2006, see art. 1

Article 2(1)

SCHEDULE 9N.I.Requirements for plant passports

1.  A plant passport may only be issued in respect of relevant material that has been the subject of a satisfactory inspection at its place of production.N.I.

Commencement Information

I20Sch. 9 para. 1 in operation at 31.3.2006, see art. 1

2.  A plant passport shall comprise either an official label or an official label together with a document of a kind normally used for trade purposes, containing the information specified in paragraph 5 or (as the case may be) 6.N.I.

Commencement Information

I21Sch. 9 para. 2 in operation at 31.3.2006, see art. 1

3.  The references in paragraph 2 above to an official label are references to a label which—N.I.

(a)has not been previously used and is made of a material suitable for its purpose, and

(b)in the case of an adhesive label, is in a form approved for use as an official label by the Department, for plant passports issued in Northern Ireland, or by the authority with responsibility or such authorisation for plant passports issued in other member States.

Commencement Information

I22Sch. 9 para. 3 in operation at 31.3.2006, see art. 1

4.—(1) The information contained in a plant passport shall be—N.I.

(a)given in at least one of the official languages of the [F21European Union], and

(b)printed, except where it would not reasonably be practicable to do so.

(2) Where the information is printed, it shall be printed in block capitals.

(3) Where the information is not printed, it shall be given in typescript or written in block capitals.

Textual Amendments

Commencement Information

I23Sch. 9 para. 4 in operation at 31.3.2006, see art. 1

5.  Where a plant passport comprises only an official label, it shall contain the information specified in paragraph 7.N.I.

Commencement Information

I24Sch. 9 para. 5 in operation at 31.3.2006, see art. 1

6.  Where the plant passport comprises an official label and an additional document—N.I.

(a)the official label shall contain at least the information specified in sub-paragraphs (a) to (e) of paragraph 7, and

(b)the additional document shall contain all the information specified in paragraph 7, and

Commencement Information

I25Sch. 9 para. 6 in operation at 31.3.2006, see art. 1

7.  The information referred to in paragraph 5 and 6 above shall be—N.I.

(a)the title “EC-plant passport”;

(b)the code for the member State in which the plant passport was issued;

(c)the name or code of the responsible official body of the member state in which the plant passport was issued;

(d)the registration number of the producer, importer or other person to whom the plant passport was issued;

(e)the week number of the date when the plant passport is attached to material, or a serial or batch number identifying that material;

(f)the botanical name in Latin of the material to which the plant passport relates;

(g)the quantity of the material to which the plant passport relates (volume or weight of wood or isolated bark, etc.);

(h)where the relevant material fulfils the requirements for a protected zone, the marking “ZP” and the code for the protected zone;

(i)in the case of a replacement plant passport, the marking “RP” and where appropriate the registration number of the producer or importer who was authorised to issue the original plant passport or to whom the original plant passport was issued; and

(j)in the case of material originating in a third country, the name of the country of origin of the material or (if appropriate) the country from which the material was consigned to Northern Ireland.

Commencement Information

I26Sch. 9 para. 7 in operation at 31.3.2006, see art. 1

Article 14(1)

SCHEDULE 10N.I.Form of phytosanitary certificate and form of phytosanitary certificate for re-export required by Article 14(1)

PART AN.I.Form of phytosanitary certificate

Commencement Information

I27Sch. 10 Pt. A in operation at 31.3.2006, see art. 1

PART BN.I.Form of phytosanitary certificate for re-export

Commencement Information

I28Sch. 10 Pt. B in operation at 31.3.2006, see art. 1

Article 14(1)

SCHEDULE 11N.I.Form of phytosanitary certificate and form of phytosanitary certificate for re-export permitted by Article 14(1)

PART AN.I.Form of phytosanitary certificate

Commencement Information

I29Sch. 11 Pt. A in operation at 31.3.2006, see art. 1

PART BN.I.Form of a phytosanitary certificate for re-export

Commencement Information

I30Sch. 11 Pt. B in operation at 31.3.2006, see art. 1

Article 5(3)

SCHEDULE 12N.I.Notice of landing

PART AN.I.

1.  The notice of landing required under Article 5(1) shall be in the form set out in Part B or in a document containing at least the information referred to in that form.N.I.

Commencement Information

I31Sch. 12 para. 1 in operation at 31.3.2006, see art. 1

2.  The information contained in the notice in paragraph (1) shall be—N.I.

(a)in English, and

(b)in typescript or block capitals.

Commencement Information

I32Sch. 12 para. 2 in operation at 31.3.2006, see art. 1

PART BN.I.

Commencement Information

I33Sch. 12 Pt. B in operation at 31.3.2006, see art. 1

Article 2(1)

SCHEDULE 13N.I.Plant Health Movement Document

PART AN.I.

1.  The plant health movement document required under Article 15(2)(a) shall be in the form set out in Part B.N.I.

Commencement Information

I34Sch. 13 para. 1 in operation at 31.3.2006, see art. 1

2.  The information contained in the notice in paragraph (1) shall be given in at least one of the official languages of the [F21European Union] and—N.I.

(a)shall be in typescript or written in block capitals; or

(b)in agreement with the Department and the official body of destination or entry shall be completed by electronic means

Textual Amendments

Commencement Information

I35Sch. 13 para. 2 in operation at 31.3.2006, see art. 1

PART BN.I.

Commencement Information

I36Sch. 13 Pt. B in operation at 31.3.2006, see art. 1

Article 43

SCHEDULE 14N.I.Revocation of Orders

Commencement Information

I37Sch. 14 in operation at 31.3.2006, see art. 1

OrderReference
The Plant Health (Wood and Bark) Order (Northern Ireland) 1993S.R. 1993/460
The Plant Health (Wood and Bark) (Amendment) Order (Northern Ireland) 1996S.R. 1996/18
The Plant Health (Wood and Bark) Order (Northern Ireland) 1997S.R. 1997/11
The Plant Health (Wood and Bark) (Amendment) Order (Northern Ireland) 1999S.R. 1999/389
The Plant Health (Wood and Bark) (Amendment) Order (Northern Ireland) 2001S.R. 2001/401
The Plant Health (Wood and Bark) (Amendment) Order (Northern Ireland) 2002S.R. 2002/285
(1)

OJ No. L 114, 30.4.2002, p.1.

(2)

OJ No. L 87, 25.3.2004, P.31.

(3)

OJ No. L 78, 24.3.2005, p.50.

(4)

If it is listed in Part A as well as in Part B.

(5)

If it is listed in Part B but not in Part A.

Yn ôl i’r brig

Options/Cymorth

Print Options

Close

Mae deddfwriaeth ar gael mewn fersiynau gwahanol:

Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.

Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.

Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

Gweler y wybodaeth ychwanegol ochr yn ochr â’r cynnwys

Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Dewisiadau Agor

Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd

Close

Rhagor o Adnoddau

Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:

  • y PDF print gwreiddiol y fel deddfwyd fersiwn a ddefnyddiwyd am y copi print
  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • slipiau cywiro
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Close

Llinell Amser Newidiadau

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

Rhagor o Adnoddau

Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:

  • y PDF print gwreiddiol y fel gwnaed fersiwn a ddefnyddiwyd am y copi print
  • slipiau cywiro

liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys

  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill