- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (a wnaed Fel)
There are outstanding changes not yet made by the legislation.gov.uk editorial team to The Toys (Safety) Regulations 1995. Any changes that have already been made by the team appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
Whole provisions yet to be inserted into this Instrument (including any effects on those provisions):
Regulation 3(1)
Commencement Information
I1Sch. 1 in force at 24.2.1995, see reg. 1(1)
If the CE marking is reduced or enlarged the proportions given in the above graduated drawing must be respected.
The various components of the CE marking must have substantially the same vertical dimension, which may not be less than 5mm.
Regulation 3(1)
1. In compliance with the requirements of Article 2 of the Directive, the users of toys as well as third parties must be protected against health hazards and risk of physical injury when toys are used as intended or in a foreseeable way, bearing in mind the normal behaviour of children. Such risks are those—U.K.
(a)which are connected with the design, construction or composition of the toy;
(b)which are inherent in the use of the toy and cannot be completely eliminated by modifying the toy’s construction and composition without altering its function or depriving it of its essential properties.
2.—(a) The degree of risk present in the use of a toy must be commensurate with the ability of the users, and where appropriate their supervisors, to cope with it. This applies in particular to toys which, by virtue of their functions, dimensions and characteristics, are intended for use by children of under 36 months.U.K.
(b)To observe this principle, a minimum age for users of toys and/or the need to ensure that they are used only under adult supervision must be specified where appropriate.
3. Labels on toys and/or their packaging and the instructions for use which accompany them must draw the attention of users or their supervisors fully and effectively to the risks involved in using them and to the ways of avoiding such risks.U.K.
1.—(a) Toys and their parts and, in the case of fixed toys, their anchorages, must have the requisite mechanical strength and, where appropriate, stability to withstand the stresses to which they are subjected during use without breaking or becoming liable to distortion at the risk of causing physical injury.
(b)Accessible edges, protrusions, cords, cables and fastenings on toys must be so designed and constructed that the risks of physical injury from contact with them are reduced as far as possible.
(c)Toys must be so designed and constructed as to minimise the risk of physical injury which could be caused by the movement of their parts.
(d)Toys, and their component parts, and any detachable parts of toys which are clearly intended for use by children under 36 months must be of such dimensions as to prevent their being swallowed and/or inhaled.
(e)Toys and their parts and the packaging in which they are contained for retail sale must not present risk of strangulation or suffocation.
(f)Toys intended for use in shallow water which are capable of carrying or supporting a child on the water must be designed and constructed so as to reduce as far as possible, taking into account the recommended use of the toy, any risk of loss of buoyancy of the toy and loss of support afforded to the child.
(g)Toys which it is possible to get inside and which thereby constitute an enclosed space for occupants must have a means of exit which the latter can open easily from the inside.
(h)Toys conferring mobility on their users must, as far as possible, incorporate a braking system which is suited to the type of toy and is commensurate with the kinetic energy developed by it. Such a system must be easy for the user to operate without risk of ejection or physical injury for the user or for third parties.
(i)The form and composition of projectiles and the kinetic energy they may develop when fired from a toy designed for that purpose must be such that, taking into account the nature of the toy, there is no unreasonable risk of physical injury to the user or to third parties.
(j)Toys containing heating elements must be so constructed as to ensure that—
the maximum temperature of any accessible surfaces does not cause burns when touched,
liquids and gases contained within toys do not reach temperatures or pressures which are such that their escape from a toy, other than for reasons essential to the proper functioning of the toy, might cause burns, scalds or other physical injury.
2.—(a) Toys must not constitute a dangerous flammable element in the child’s environment. They must therefore be composed of materials which—
(1)do not burn if directly exposed to a flame or spark or other potential seat of fire; or
(2)are not readily flammable (the flame goes out as soon as the fire cause disappears); or
(3)if they do ignite, burn slowly and present a low rate of spread of the flame; or
(4)irrespective of the toy’s chemical composition, are treated so as to delay the combustion process.
Such combustible materials must not constitute a risk of ignition for other materials used in the toy.
(b)Toys which, for reasons essential to their functioning, contain dangerous substances or preparations as defined in Council Directive 67/548/EEC(1), in particular materials and equipment for chemistry experiments, model assembly, plastic or ceramic moulding, enamelling, photography or similar activities, must not contain, as such, substances or preparations which may become flammable due to the loss of non-flammable volatile components.
(c)Toys must not be explosive or contain elements or substances likely to explode when used as specified in Article 2(1) of the Toys Directive(2). This provision does not apply to toy percussion caps, for which reference should be made to point 10 of Annex 1 and the related footnote.
(d)Toys and, in particular, chemical games and toys, must not contain as such substances or preparations—
which, when mixed, may explode:
through chemical reaction, or through heating,
when mixed with oxidising substances,
which contain volatile components which are flammable in air and liable to form flammable or explosive vapour/air mixture.
1. Toys must be so designed and constructed that, when used as specified in Article 2(1) of the Toys Directive(2), they do not present health hazards or risks of physical injury by ingestion, inhalation or contact with the skin, mucous tissues or eyes.
They must in all cases comply with the relevant Community legislation relating to certain categories of products or to the prohibition, restriction of use or labelling of certain dangerous substances and preparations.
2. In particular, for the protection of children’s health, bioavailability resulting from the use of toys must not, as an objective, exceed the following levels per day—
0,2 μg for antimony,
0,1 μg for arsenic,
25,0 μg for barium,
0,6 μg for cadmium,
0,3 μg for chromium,
0,7 μg for lead,
0,5 μg for mercury,
5,0 μg for selenium,
or such other values as may be laid down for these or other substances in Community legislation based on scientific evidence.
The bioavailability of these substances means the soluble extract having toxicological significance.
3. Toys must not contain dangerous substances or preparations within the meaning of Directives 67/548/EEC and 88/379/EEC(3) in amounts which may harm the health of children using them. At all events it is strictly forbidden to include, in a toy, dangerous substances or preparations if they are intended to be used as such while the toy is being used.
However, where a limited number of substances or preparations are essential to the functioning of certain toys, in particular materials and equipment for chemistry experiments, model assembly, plastic or ceramic moulding, enamelling, photography or similar activities, they are permitted up to a maximum concentration level to be defined for each substance or preparation by mandate to the European Committee for Standardisation (CEN) according to the procedure of the committee set up by Directive 83/189/EEC, provided the permitted substances and preparations comply with the Community classification rules in respect of labelling, without prejudice to point 4 of Annex IV.
4.—(a) Electric toys must not be powered by electricity of a nominal voltage exceeding 24 volts and no part of the toy may exceed 24 volts.
(b)Parts of toys which are connected to, or liable to come into contact with a source of electricity capable of causing electric shock, together with the cables or other conductors through which electricity is conveyed to such parts, must be properly insulated and mechanically protected so as to prevent the risk of such shock.
(c)Electric toys must be so designed and constructed as to ensure that the maximum temperatures reached by all directly accessible surfaces are not such as to cause burns when touched.
5. Toys must be so designed and manufactured as to meet the requirements of hygiene and cleanliness in order to avoid any risk of infection, sickness and contamination.
6. Toys must not contain radioactive elements or substances in forms or proportions likely to be detrimental to a child’s health. Council Directive 80/836/Euratom shall apply(4).
Regulation 3(1)
1. Christmas decorations.U.K.
Commencement Information
I3Sch. 3 para. 1 in force at 24.2.1995, see reg. 1(1)
2. Detailed scale models for adult collectors.U.K.
Commencement Information
I4Sch. 3 para. 2 in force at 24.2.1995, see reg. 1(1)
3. Equipment intended to be used collectively in playgrounds.U.K.
Commencement Information
I5Sch. 3 para. 3 in force at 24.2.1995, see reg. 1(1)
4. Sports equipment.U.K.
Commencement Information
I6Sch. 3 para. 4 in force at 24.2.1995, see reg. 1(1)
5. Aquatic equipment intended to be used in deep water.U.K.
Commencement Information
I7Sch. 3 para. 5 in force at 24.2.1995, see reg. 1(1)
6. Folk dolls and decorative dolls and other similar articles for adult collectors.U.K.
Commencement Information
I8Sch. 3 para. 6 in force at 24.2.1995, see reg. 1(1)
7. “Professional” toys installed in public places (shopping centres, stations, etc.).U.K.
Commencement Information
I9Sch. 3 para. 7 in force at 24.2.1995, see reg. 1(1)
8. Puzzles with more than 500 pieces or without picture, intended for specialists.U.K.
Commencement Information
I10Sch. 3 para. 8 in force at 24.2.1995, see reg. 1(1)
9. Air guns and air pistols.U.K.
Commencement Information
I11Sch. 3 para. 9 in force at 24.2.1995, see reg. 1(1)
10. Fireworks, including percussion caps(5).U.K.
Commencement Information
I12Sch. 3 para. 10 in force at 24.2.1995, see reg. 1(1)
11. Slings and catapults.U.K.
Commencement Information
I13Sch. 3 para. 11 in force at 24.2.1995, see reg. 1(1)
12. Sets of darts with metallic points.U.K.
Commencement Information
I14Sch. 3 para. 12 in force at 24.2.1995, see reg. 1(1)
13. Electric ovens, irons or other functional products operated at a nominal voltage exceeding 24 volts.U.K.
Commencement Information
I15Sch. 3 para. 13 in force at 24.2.1995, see reg. 1(1)
14. Products containing heating elements intended for use under the supervision of an adult in a teaching context.U.K.
Commencement Information
I16Sch. 3 para. 14 in force at 24.2.1995, see reg. 1(1)
15. Vehicles with combustion engines.U.K.
Commencement Information
I17Sch. 3 para. 15 in force at 24.2.1995, see reg. 1(1)
16. Toy steam engines.U.K.
Commencement Information
I18Sch. 3 para. 16 in force at 24.2.1995, see reg. 1(1)
17. Bicycles designed for sport or for travel on the public highway.U.K.
Commencement Information
I19Sch. 3 para. 17 in force at 24.2.1995, see reg. 1(1)
18. Video toys that can be connected to a video screen, operated at a nominal voltage exceeding 24 volts.U.K.
Commencement Information
I20Sch. 3 para. 18 in force at 24.2.1995, see reg. 1(1)
19. Babies' dummies.U.K.
Commencement Information
I21Sch. 3 para. 19 in force at 24.2.1995, see reg. 1(1)
20. Faithful reproductions of real fire arms.U.K.
Commencement Information
I22Sch. 3 para. 20 in force at 24.2.1995, see reg. 1(1)
21. Fashion jewellery for children.U.K.
Commencement Information
I23Sch. 3 para. 21 in force at 24.2.1995, see reg. 1(1)
Regulation 10(8)
Toys must be accompanied by appropriate clearly legible warnings in order to reduce inherent risks in their use as described in the essential requirements, and specifically:
1. Toys which might be dangerous for children under 36 months of age shall bear a warning, for example: “Not suitable for children under 36 months” or “Not suitable for children under three years” together with a brief indication, which may also appear in the instructions for use, of the specific risks calling for this restriction.
This provision does not apply to toys which, on account of their function, dimensions, characteristics, properties or other cogent grounds, are manifestly unsuitable for children under 36 months.
Commencement Information
I24Sch. 4 para. 1 in force at 24.2.1995, see reg. 1(1)
2. Such toys shall be accompanied by instructions drawing attention to the need to carry out checks and maintenance of the main parts (suspensions, fixings, anchorages, etc.) at intervals, and pointing out that, if these checks are not carried out, the toy may cause a fall or overturn.
Instructions must also be given as to correct assembly of the toy, indicating those parts which can present dangers if it is incorrectly assembled.
Commencement Information
I25Sch. 4 para. 2 in force at 24.2.1995, see reg. 1(1)
3. Functional toys or their packaging shall bear the marking “Warning: to be used under the direct supervision of an adult”.
In addition, these toys shall be accompanied by directions giving working instructions as well as the precautions to be taken by the user, with the warning that failure to take these precautions would expose the user to the hazards—to be specified—normally associated with the appliance or product of which the toy is a scale model or an imitation. It will also be indicated that the toy must be kept out of the reach of very young children.
“Functional toys” means toys which are used in the same way as, and are often scale models of, appliances or installations intended for adults.
Commencement Information
I26Sch. 4 para. 3 in force at 24.2.1995, see reg. 1(1)
4.—(a) Without prejudice to the application of the provisions laid down in Community directives on the classification, packaging and labelling of dangerous substances or preparations, the instructions for use of toys containing inherently dangerous substances or preparations shall bear a warning of the dangerous nature of these substances or preparations and an indication of the precautions to be taken by the user in order to avoid hazards associated with them, which shall be specified concisely according to the type of toy. The first aid to be given in the event of serious accidents resulting from the use of this type of toy shall also be mentioned. It shall also be stated that the toys must be kept out of reach of very young children.
(b)In addition to the instructions provided for in (a), chemical toys shall bear the following marking on their packaging—
“Warning: for children over(6) years of age only. For use under adult supervision”.
In particular, the following are regarded as chemical toys: chemistry sets, plastic embedding sets, miniature workshops for ceramics, enamelling or photography and similar toys.
Commencement Information
I27Sch. 4 para. 4 in force at 24.2.1995, see reg. 1(1)
5. If these products are offered for sale as toys they shall bear the marking—
“Warning: protective equipment should be worn”.
Moreover, the instructions for use shall contain a reminder that the toy must be used with caution, since it requires great skill, so as to avoid falls or collisions causing injury to the user and third parties. Some indication shall also be given as to recommended protective equipment (helmets, gloves, knee-pads, elbow pads, etc.).
Commencement Information
I28Sch. 4 para. 5 in force at 24.2.1995, see reg. 1(1)
6. The toys intended for use in water defined in Section II.1(f) of Annex II shall contain the warning in accordance with CEN’s brief to adapt standard EN/71, parts 1 and 2—
“Warning! Only to be used in water in which the child is within its depth and under supervision”.
Commencement Information
I29Sch. 4 para. 6 in force at 24.2.1995, see reg. 1(1)
Regulation 10(12)
1. The notice shall—U.K.
(a)specify the description of the toy to which the notice relates;
(b)state that the enforcement authority suspects that the CE marking has been affixed to the toy in circumstances where a provision or provisions of these Regulations has or have not been complied with and the reasons for that suspicion;
(c)specify the provision or provisions referred to in paragraph (b) above;
(d)require that person—
(i)to secure that any toy to which the notice relates conforms as regards the provisions concerning the CE marking and to end the infringement within such period as may be specified by the notice; or
(ii)to provide evidence within that period to the satisfaction of the enforcement authority that all the provisions of these Regulations have been complied with; and
(e)warn that person that if the non-conformity continues (or if satisfactory evidence has not been produced under sub-paragraph (ii) of paragraph (d) above) within the period specified in the notice, further action may be taken under these Regulations in respect of that toy or any toy of the same type supplied by that person.
Commencement Information
I30Sch. 5 para. 1 in force at 24.2.1995, see reg. 1(1)
2. The notice may include directions as to the measures to be taken by that person to secure conformity of that toy with the provisions of these Regulations including different ways of securing conformity.U.K.
Commencement Information
I31Sch. 5 para. 2 in force at 24.2.1995, see reg. 1(1)
OJ No. L 196, 16.8.1967, p. 1/67.
i.e when they are used as intended to be used or in a foreseeable way bearing in mind the normal behaviour of children of less than 14 years of age.
OJ No. L 187, 16.7.1988, p. 14.
OJ No. L 246, 17.9.1980, p. 1.
Except percussion caps specifically designed for use in toys, without prejudice to the provisions of the Explosives Act 1875 (c. 17).
Age to be decided by the manufacturer.
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.