- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (a wnaed Fel)
Dyma’r fersiwn wreiddiol (fel y’i gwnaed yn wreiddiol). This item of legislation is currently only available in its original format.
Regulation 4
1 | 2 | 3 | 4 | |
---|---|---|---|---|
Item | PM/REF No. | CAS No. | Name | Restrictions |
1. | 10030 | 000514-10-3 | Abietic acid | |
2. | 10060 | 000075-07-0 | Acetaldehyde | |
3. | 10090 | 000064-19-7 | Acetic acid | |
4. | 10120 | 000108-05-4 | Acetic acid, vinyl ester | The specific migration of this substance shall not exceed 12 mg/kg |
5. | 10150 | 000108-24-7 | Acetic anhydride | |
6. | 10210 | 000074-86-2 | Acetylene | |
7. | 10630 | 000079-06-1 | Acrylamide | The specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.01 mg/kg) |
8. | 10660 | 015214-89-8 | 2-Acrylamido-2-methylpropane sulphonic acid | The specific migration of this substance shall not exceed 0.05 mg/kg |
9. | 10690 | 000079-10-7 | Acrylic acid | |
10. | 10750 | 002495-35-4 | Acrylic acid, benzyl ester | |
11. | 10780 | 000141-32-2 | Acrylic acid, n-butyl ester | |
12. | 10810 | 002998-08-5 | Acrylic acid, sec-butyl ester | |
13. | 10840 | 001663-39-4 | Acrylic acid, tert-butyl ester | |
14. | 11470 | 000140-88-5 | Acrylic acid, ethyl ester | |
15. | As item 19 | 000818-61-1 | Acrylic acid, hydroxyethyl ester | |
16. | 11590 | 000106-63-8 | Acrylic acid, isobutyl ester | |
17. | 11680 | 000689-12-3 | Acrylic acid, isopropyl ester | |
18. | 11710 | 000096-33-3 | Acrylic acid, methyl ester | |
19. | 11830 | 000818-61-1 | Acrylic acid, monoester with ethylene glycol | |
20. | 11890 | 002499-59-4 | Acrylic acid, n-octyl ester | |
21. | 11980 | 000925-60-0 | Acrylic acid, propyl ester | |
22. | 12100 | 000104-13-1 | Acrylonitrile | The specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.02 mg/kg, analytical tolerance included) |
23. | 12130 | 000124-04-9 | Adipic acid | |
24. | 12280 | 002035-75-8 | Adipic anhydride | |
25. | 12310 | — | Albumin | |
26. | 12340 | — | Albumin, coagulated by formaldehyde | |
27. | 12375 | — | Alcohols, aliphatic, monohydric, saturated, linear, primary (C4-C22) | |
28. | 12670 | 002855-13-2 | 1-Amino-3-aminomethyl-3,5,5-trimethylcyclohexane | The specific migration of this substance shall not exceed 6 mg/kg |
29. | 12788 | 002432-99-7 | 11-Aminoundecanoic acid | The specific migration of this substance shall not exceed 5 mg/kg |
30. | 12789 | 007664-41-7 | Ammonia | |
31. | 12820 | 000123-99-9 | Azelaic acid | |
32. | 12970 | 004196-95-6 | Azelaic anhydride | |
33. | 13000 | 001477-55-0 | 1,3-Benzenedimethanamine | The specific migration of this substance shall not exceed 0.05 mg/kg |
34. | 13090 | 000065-85-0 | Benzoic acid | |
35. | 13150 | 000100-51-6 | Benzyl alcohol | |
36. | As item 79 | 000111-46-6 | Bis(2-hydroxyethyl) ether | As item 79 |
37. | As item 217 | 000077-99-6 | 2,2-Bis(hydroxymethylbutan-1-ol) | As item 217 |
38. | 13390 | 000105-08-8 | 1,4-Bis(hydroxymethyl)-cyclohexane | |
39. | 13480 | 000080-05-7 | 2,2-Bis(4-hydroxyphenyl)-propane | The specific migration of this substance shall not exceed 3 mg/kg |
40. | 13510 | 001675-54-3 | 2,2-Bis(4-hydroxyphenyl)propane bis(2,3-epoxypropyl) ether | The quantity of this substance in the finished plastic material or article shall not exceed 1 mg/kg or the specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.02 mg/kg, analytical tolerance included) |
41. | 13530 | 038103-06-9 | 2,2-Bis(4-hydroxyphenyl)propane bis(phthalic anhydride) | The specific migration of this substance shall not exceed 0.05 mg/kg |
42. | As item 93 | 000110-98-5 | Bis(hydroxypropyl) ether | |
43. | As item 78 | 005124-30-1 | Bis(4-isocyanatocyclohexyl)methane | As item 78 |
44. | 13600 | 047465-97-4 | 3,3-Bis(3-methyl-4-hydroxyphenyl)-indolin-2-one | The specific migration of this substance shall not exceed 1.8 mg/kg |
45. | As item 39 | 000080-05-7 | Bisphenol A | As item 39 |
46. | As item 40 | 001675-54-3 | Bisphenol A bis(2,3-epoxypropyl) ether | As item 40 |
47. | 13614 | 038103-06-9 | Bisphenol A bis(phthalic anhydride) | As item 41 |
48. | 13630 | 000106-99-0 | Butadiene | The quantity of this substance in the finished plastic material or article shall not exceed 1 mg/kg or the specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.02 mg/kg, analytical tolerance included) |
49. | 13690 | 000107-88-0 | Butan-1,3-diol | |
50. | 13840 | 000071-36-3 | Butan-1-ol | |
51. | 13870 | 000106-98-9 | But-1-ene | |
52. | 13900 | 000107-01-7 | But-2-ene | |
53. | 14110 | 000123-72-8 | Butyraldehyde | |
54. | 14140 | 000107-92-6 | Butyric acid | |
55. | 14170 | 000106-31-0 | Butyric anhydride | |
56. | 14200 | 000105-60-2 | Caprolactam | The specific migration of this substance alone or together with item 57 shall not exceed a total of 15 mg/kg |
57. | 14230 | 002123-24-2 | Caprolactam, sodium salt | The specific migration of this substance alone or together with item 56 shall not exceed a total of 15 mg/kg (expressed as caprolactam) |
58. | 14320 | 000124-07-2 | Caprylic acid | |
59. | 14350 | 000630-08-0 | Carbon monoxide | |
60. | 14380 | 000075-44-5 | Carbonyl chloride | The quantity of this substance in the finished plastic material or article shall not exceed 1 mg/kg |
61. | 14411 | 008001-79-4 | Castor oil | |
62. | 14500 | 009004-34-6 | Cellulose | |
63. | 14530 | 007782-50-5 | Chlorine | |
64. | As item 94 | 000106-89-8 | 1-Chloro-2,3-epoxypropane | As item 94 |
65. | 14680 | 000077-92-9 | Citric acid | |
66. | 14710 | 000108-39-4 | m-Cresol | |
67. | 14740 | 000095-48-7 | o-Cresol | |
68. | 14770 | 000106-44-5 | p-Cresol | |
69. | As item 38 | 000105-08-8 | 1,4-Cyclohexanedimethanol | |
70. | 14950 | 003173-53-3 | Cyclohexyl isocyanate | The quantity in the finished plastic material or article of any substance within, or any combination of substances within, items 70, 78, 88, 90, 91, 92, 117, 150, 153, 211, 212 and 213 and shall not exceed 1 mg/kg (expressed as isocyanate moiety) |
71. | 15070 | 001647-16-1 | Dec-1,9-diene | The specific migration of this substance shall not exceed 0.05 mg/kg |
72. | 15095 | 000334-48-5 | Decanoic acid | |
73. | 15100 | 000112-30-1 | Decan-1-ol | |
74. | 15250 | 000110-60-1 | 1,4-Diaminobutane | |
75. | As item 97 | 000107-15-3 | 1,2-Diaminoethane | As item 97 |
76. | As item 116 | 000124-09-4 | 1,6-Diaminohexane | As item 116 |
77. | 15565 | 000106-46-7 | 1,4-Dichlorobenzene | The specific migration of this substance shall not exceed 12 mg/kg |
78. | 15700 | 005124-30-1 | Dicyclohexylmethane-4,4'-diisocyanate | As item 70 |
79. | 15760 | 000111-46-6 | Diethylene glycol | The specific migration of this substance alone or together with item 98 shall not exceed a total of 30 mg/kg |
80. | 15790 | 000111-40-0 | Diethylenetriamine | The specific migration of this substance shall not exceed 5 mg/kg |
81. | 15820 | 000345-92-6 | 4,4'-Difluorobenzophenone | The specific migration of this substance shall not exceed 0.05 mg/kg |
82. | 15880 | 000120-80-9 | 1,2-Dihydroxybenzene | The specific migration of this substance shall not exceed 6 mg/kg |
83. | 15910 | 000108-46-3 | 1,3-Dihydroxybenzene | The specific migration of this substance shall not exceed 2.4 mg/kg |
84. | 15940 | 000123-31-9 | 1,4-Dihydroxybenzene | The specific migration of this substance shall not exceed 0.6 mg/kg |
85. | 15970 | 000611-99-4 | 4,4'-Dihydroxybenzophenone | The specific migration of this substance shall not exceed 6 mg/kg |
86. | 16000 | 000092-88-6 | 4,4'-Dihydroxybiphenyl | The specific migration of this substance shall not exceed 6 mg/kg |
87. | 16150 | 000108-01-0 | Dimethylaminoethanol | The specific migration of this substance shall not exceed 18 mg/kg |
88. | 16240 | 000091-97-4 | 3,3'-Dimethyl-4,4'-diisocyanatobiphenyl | As item 70 |
89. | 16480 | 000126-58-9 | Dipentaerythritol | |
90. | 16570 | 004128-73-8 | Diphenylether-4,4'-diisocyanate | As item 70 |
91. | 16600 | 005873-54-1 | Diphenylmethane-2,4'-diisocyanate | As item 70 |
92. | 16630 | 000101-68-8 | Diphenylmethane-4,4'-diisocyanate | As item 70 |
93. | 16660 | 000110-98-5 | Dipropyleneglycol | |
94. | 16750 | 000106-89-8 | Epichlorohydrin | The quantity of this substance in the finished plastic material or article shall not exceed 1 mg/kg |
95. | 16780 | 000064-17-5 | Ethanol | |
96. | 16950 | 000074-85-1 | Ethylene | |
97. | 16960 | 000107-15-3 | Ethylenediamine | The specific migration of this substance shall not exceed 12 mg/kg |
98. | 16990 | 000107-21-1 | Ethylene glycol | The specific migration of this substance alone or together with item 79 shall not exceed a total of 30 mg/kg |
99. | 17005 | 000151-56-4 | Ethyleneimine | The specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.01 mg/kg) |
100. | 17020 | 000075-21-8 | Ethylene oxide | The quantity of this substance in the finished plastic material or article shall not exceed 1 mg/kg |
101. | 17050 | 00104-76-7 | 2-Ethylhexan-1-ol | The specific migration of this substance shall not exceed 30 mg/kg |
102. | 17160 | 000097-53-0 | Eugenol | The specific migration of this substance shall not exceed 0.01 mg/kg |
103. | 17170 | 061788-47-4 | Fatty acids, coco | |
104. | 17200 | 068308-53-2 | Fatty acids, soya | |
105. | 17230 | 061790-12-3 | Fatty acids, tall oil | |
106. | 17260 | 000050-00-0 | Formaldehyde | The specific migration of this substance shall not exceed 15 mg/kg |
107. | 17290 | 000110-17-8 | Fumaric acid | |
108. | 17530 | 000050-99-7 | Glucose | |
109. | 18010 | 000110-94-1 | Glutaric acid | |
110. | 18070 | 000108-55-4 | Glutaric anhydride | |
111. | 18100 | 000056-81-5 | Glycerol | |
112. | 18250 | 000115-28-6 | Hexachloroendomethylene-tetrahydrophthalic acid | The specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.01 mg/kg) |
113. | 18280 | 000115-27-5 | Hexachloroendomethylene-tetrahydrophthalic anhydride | The specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.01 mg/kg) |
114. | 18310 | 036653-82-4 | Hexadecan-l-ol | |
115. | 18430 | 000116-15-4 | Hexafluoropropylene | The specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.01 mg/kg) |
116. | 18460 | 000124-09-4 | Hexamethylenediamine | The specific migration of this substance shall not exceed 2.4 mg/kg |
117. | 18640 | 000822-06-0 | Hexamethylene diisocyanate | As item 70 |
118. | 18670 | 000100-97-0 | Hexamethylenetetramine | The specific migration of this substance shall not exceed 15 mg/kg (expressed as formaldehyde) |
119. | As item 84 | 000123-31-9 | Hydroquinone | As item 84 |
120. | 18880 | 000099-96-7 | p-Hydroxybenzoic acid | |
121. | 19000 | 000115-11-7 | Isobutene | |
122. | 19210 | 001459-93-4 | Isophthalic acid, dimethyl ester | The specific migration of this substance shall not exceed 0.05 mg/kg |
123. | 19270 | 000097-65-4 | Itaconic acid | |
124. | 19460 | 000050-21-5 | Lactic acid | |
125. | 19470 | 000143-07-7 | Lauric acid | |
126. | 19480 | 002146-71-6 | Lauric acid, vinyl ester | |
127. | 19510 | 011132-73-3 | Lignocellulose | |
128. | 19540 | 000110-16-7 | Maleic acid | The specific migration of this substance alone or together with item 129 shall not exceed a total of 30 mg/kg |
129. | 19960 | 000108-31-6 | Maleic anhydride | The specific migration of this substance alone or together with item 128 shall not exceed a total of 30 mg/kg (expressed as maleic acid) |
130. | As item 215 | 000108-78-1 | Melamine | As item 215 |
131. | 20020 | 000079-41-4 | Methacrylic acid | |
132. | 20080 | 002495-37-6 | Methacrylic acid, benzyl ester | |
133. | 20110 | 000097-88-1 | Methacrylic acid, butyl ester | |
134. | 20140 | 002998-18-7 | Methacrylic acid, sec-butyl ester | |
135. | 20170 | 000585-07-9 | Methacrylic acid, tert-butyl ester | |
136. | 20890 | 000097-63-2 | Methacrylic acid, ethyl ester | |
137. | 21010 | 000097-86-9 | Methacrylic acid, isobutyl ester | |
138. | 21100 | 004655-34-9 | Methacrylic acid, isopropyl ester | |
139. | 21130 | 000080-62-6 | Methacrylic acid, methyl ester | |
140. | 21190 | 000868-77-9 | Methacrylic acid, monoester with ethyleneglycol | |
141. | 21280 | 002177-70-0 | Methacrylic acid, phenyl ester | |
142. | 21340 | 002210-28-8 | Methacrylic acid, propyl ester | |
143. | 21460 | 000760-93-0 | Methacrylic anhydride | |
144. | 21490 | 000126-98-7 | Methacrylonitrile | The specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.02 mg/kg, analytical tolerance included) |
145. | 21550 | 000067-56-1 | Methanol | |
146. | 21940 | 000924-42-5 | N-Methylolacrylamide | The specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.01 mg/kg) |
147. | 22150 | 000691-37-2 | 4-Methylpent-1-ene | The specific migration of this substance shall not exceed 0.02 mg/kg |
148. | 22350 | 000544-63-8 | Myristic acid | |
149. | 22390 | 000840-65-3 | 2,6-Naphthalenedicarboxylic acid, dimethyl ester | The specific migration of this substance shall not exceed 0.05 mg/kg |
150. | 22420 | 003173-72-6 | 1,5-Naphthalene diisocyanate | As item 70 |
151. | 22450 | 009004-70-0 | Nitrocellulose | |
152. | 22480 | 000143-08-8 | Nonan-1-ol | |
153. | 22570 | 000112-96-9 | Octadecyl isocyanate | As item 70 |
154. | 22600 | 000111-87-5 | Octan-1-ol | |
155. | 22660 | 000111-66-0 | Oct-l-ene | The specific migration of this substance shall not exceed 15 mg/kg |
156. | 22763 | 000112-80-1 | Oleic acid | |
157. | 22780 | 000057-10-3 | Palmitic acid | |
158. | 22840 | 000115-77-5 | Pentaerythritol | |
159. | 22870 | 000071-41-0 | Pentan-1-ol | |
160. | 22960 | 000108-95-2 | Phenol | |
161. | 23050 | 000108-45-2 | 1,3-Phenylenediamine | The quantity of this substance in the finished plastic material or article shall not exceed 1 mg/kg |
162. | As item 60 | 000075-44-5 | Phosgene | As item 60 |
163. | 23170 | 007664-38-2 | Phosphoric acid | |
164. | As item 204 | — | Phthalic acid | As item 204 |
165. | 23200 | 000088-99-3 | o-Phthalic acid | |
166. | 23230 | 000131-17-9 | Phthalic acid, diallyl ester | The specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.01 mg/kg) |
167. | 23380 | 000085-44-9 | Phthalic anhydride | |
168. | 23470 | 000080-56-8 | alpha-Pinene | |
169. | 23500 | 000127-91-3 | beta-Pinene | |
170. | 23590 | 025322-68-3 | Polyethylene glycol | |
171. | 23650 | 025322-69-4 | Polypropylene glycol (molecular weight greater than 400) | |
172. | 23651 | 025322-69-4 | Polypropyleneglycol | |
173. | 23740 | 000057-55-6 | Propan-1,2-diol | |
174. | 23800 | 000071-23-8 | Propan-1-ol | |
175. | 23830 | 000067-63-0 | Propan-2-ol | |
176. | 23860 | 000123-38-6 | Propionaldehyde | |
177. | 23890 | 000079-09-4 | Propionic acid | |
178. | 23950 | 000123-62-6 | Propionic anhydride | |
179. | 23980 | 000115-07-1 | Propylene | |
180. | 24010 | 000075-56-9 | Propylene oxide | The quantity of this substance in the finished plastic material or article shall not exceed 1 mg/kg |
181. | As item 82 | 000120-80-9 | Pyrocatechol | As item 82 |
182. | 24057 | 000089-32-7 | Pyromellitic anhydride | The specific migration of this substance shall not exceed 0.05 mg/kg (expressed as pyromellitic acid) |
183. | 24070 | 073138-82-6 | Resin acids and rosin acids | |
184. | As item 83 | 000108-46-3 | Resorcinol | As item 83 |
185. | 24100 | 008050-09-7 | Rosin | |
186. | 24130 | 008050-09-7 | Rosin gum | |
187. | 24160 | 008052-10-6 | Rosin tall oil | |
188. | 24190 | 009014-63-5 | Rosin wood | |
189. | 24250 | 009006-04-6 | Rubber, natural | |
190. | 24270 | 000069-72-7 | Salicylic acid | |
191. | 24280 | 000111-20-6 | Sebacic acid | |
192. | 24430 | 002561-88-8 | Sebacic anhydride | |
193. | 24475 | 001313-82-2 | Sodium sulphide | |
194. | 24490 | 000050-70-4 | Sorbitol | |
195. | 24520 | 008001-22-7 | Soybean oil | |
196. | 24540 | 009005-25-8 | Starch, edible | The specific migration of this substance shall not exceed 0.05 mg/kg |
197. | 24550 | 000057-11-4 | Stearic acid | |
198. | 24610 | 000100-42-5 | Styrene | |
199. | 24820 | 000110-15-6 | Succinic acid | |
200. | 24850 | 000108-30-5 | Succinic anhydride | |
201. | 24880 | 000057-50-1 | Sucrose | |
202. | 24887 | 006362-79-4 | 5-Sulphoisophthalic acid, monosodium salt | The specific migration of this substance shall not exceed 5 mg/kg |
203. | 24888 | 003965-55-7 | 5-Sulphoisophthalic acid, monosodium salt, dimethyl ester | The specific migration of this substance shall not exceed 0.05 mg/kg |
204. | 24910 | 000100-21-0 | Terephthalic acid | The specific migration of this substance alone or together with item 205 shall not exceed a total of 7.5 mg/kg |
205. | 24940 | 000100-20-9 | Terephthalic acid dichloride | The specific migration of this substance alone or together with item 204 shall not exceed 7.5 mg/kg (expressed as terephthalic acid) |
206. | 24970 | 000120-61-6 | Terephthalic acid, dimethyl ester | |
207. | 25090 | 000112-60-7 | Tetraethylene glycol | |
208. | 25120 | 000116-14-3 | Tetrafluoroethylene | The specific migration of this substance shall not exceed 0.05 mg/kg |
209. | 25150 | 000109-99-9 | Tetrahydrofuran | The specific migration of this substance shall not exceed 0.6 mg/kg |
210. | 25180 | 000102-60-3 | N,N,N',N'-Tetrakis(2-hydroxypropyl)-ethylenediamine | |
211. | 25210 | 000584-84-9 | 2,4-Toluene diisocyanate | As item 70 |
212. | 25240 | 000091-08-7 | 2,6-Toluene diisocyanate | As item 70 |
213. | 25270 | 026747-90-0 | 2,4-Toluene diisocyanate dimer | As item 70 |
214. | 25360 | — | Trialkyl(C5-C15)acetic acid, 2,3-epoxypropyl ester | The specific migration of this substance shall not exceed 6 mg/kg |
215. | 25420 | 000108-78-1 | 2,4,6-Triamino-1,3,5-triazine | The specific migration of this substance shall not exceed 30 mg/kg |
216. | 25510 | 000112-27-6 | Triethylene glycol | |
217. | 25600 | 000077-99-6 | 1,1,1-Trimethylolpropane | The specific migration of this substance shall not exceed 6 mg/kg |
218. | 25910 | 024800-44-0 | Tripropylene glycol | |
219. | 25960 | 000057-13-6 | Urea | |
220. | 26050 | 000075-01-4 | Vinyl chloride | The restrictions are those in regulation 5(1)(a) and (b) of the 1987 Regulations when analysed by the method referred to in regulation 14 of those Regulations |
221. | 26110 | 000075-35-4 | Vinylidene chloride | The quantity of this substance in the finished plastic material or article shall not exceed 5 mg/kg or the specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.05 mg/kg) |
222. | 26140 | 000075-38-7 | Vinylidene fluoride | The specific migration of this substance shall not exceed 5 mg/kg |
1 | 2 | 3 | 4 | |
---|---|---|---|---|
Item | PM/REF No. | CAS No. | Name | Restrictions |
1. | 10599/90A | 061788-89-4 | Acids, fatty, unsaturated (C18), dimers, distilled | |
2. | 10599/91 | 061788-89-4 | Acids, fatty, unsaturated (C18), dimers, non-distilled | |
3. | 10599/92A | 068783-41-5 | Acids, fatty, unsaturated (C18), dimers, hydrogenated, distilled | |
4. | 10599/93 | 068783-41-5 | Acids, fatty, unsaturated (C18), dimers, hydrogenated, non-distilled | |
5. | 11000 | 050976-02-8 | Acrylic acid, dicyclopentadienyl ester | |
6. | 11245 | 002156-97-0 | Acrylic acid, dodecyl ester | |
7. | 11500 | 000103-11-7 | Acrylic acid, 2-ethylhexyl ester | |
8. | 11530 | 000999-61-1 | Acrylic acid, 2-hydroxypropyl ester | |
9. | 12265 | 004074-90-2 | Adipic acid, divinyl ester | |
10. | 12910 | 001732-10-1 | Azelaic acid, dimethyl ester | |
11. | As item 78 | 000528-44-9 | 1,2,4-Benzenetricarboxylic acid | As item 78 |
12. | 13060 | 004422-95-1 | 1,3,5-Benzenetricarboxylic acid trichloride | |
13. | As item 23 | 000091-76-9 | Benzoguanamine | |
14. | As item 28 | 000080-09-1 | Bisphenol S | |
15. | 13720 | 000110-63-4 | Butan-1,4-diol | |
16. | 13780 | 002425-79-8 | Butan-1,4-diol, bis(2,3-epoxypropyl) ether | The quantity in the finished plastic material or article of any substance within, or any combination of substances within, items 16 and 56 shall not exceed 5 mg/kg (expressed as epoxy) |
17. | 13810 | 000505-65-7 | Butan-1,4-diol formal | |
18. | 13932 | 000598-32-3 | But-3-en-2-ol | |
19. | 14020 | 000098-54-4 | 4-tert-Butylphenol | |
20. | 14260 | 000502-44-3 | Caprolactone | |
21. | 14800 | 003724-65-0 | Crotonic acid | |
22. | 15130 | 000872-05-9 | Dec-1-ene | |
23. | 15310 | 000091-76-9 | 2,4-Diamino-5-phenyl-1,3,5-triazine | |
24. | 15370 | 003236-53-1 | 1,6-Diamino-2,2,4-trimethylhexane | |
25. | 15400 | 003236-54-2 | 1,6-Diamino-2,4,4-trimethylhexane | |
26. | 15610 | 000080-07-9 | 4,4'-Dichlorodiphenyl sulphone | |
27. | 15730 | 000077-73-6 | Dicyclopentadiene | |
28. | 16090 | 000080-09-1 | 4,4'-Dihydroxydiphenyl sulphone | |
29. | 16210 | 006864-37-5 | 3,3'-Dimethyl-4,4'-diamino-dicyclohexylmethane | |
30. | 16360 | 000576-26-1 | 2,6-Dimethylphenol | |
31. | 16390 | 000126-30-7 | 2,2-Dimethylpropan-1,3-diol | |
32. | 16450 | 000646-06-0 | 1,3-Dioxolane | |
33. | 16540 | 000102-09-0 | Diphenyl carbonate | |
34. | 16690 | 001321-74-0 | Divinylbenzene | |
35. | 16697 | 000693-23-2 | Dodecanedioic acid | |
36. | 17110 | 016219-75-3 | 5-Ethylidenebicyclo[2.2.1] hept-2-ene | |
37. | 18220 | 068564-88-5 | N-Heptylaminoundecanoic acid | |
38. | 18370 | 000592-45-0 | Hexa-1,4-diene | |
39. | 18441 | 000085-42-7 | Hexahydrophthalic anhydride | |
40. | 18700 | 000629-11-8 | Hexan-1,6-diol | |
41. | 18820 | 000592-41-6 | Hex-1-ene | |
42. | 19060 | 000109-53-5 | Isobutyl vinyl ether | |
43. | 19150 | 000121-91-5 | Isophthalic acid | |
44. | 19180 | 000099-63-8 | Isophthalic acid dichloride | |
45. | As item 60 | 000078-79-5 | Isoprene | |
46. | 19490 | 000947-04-6 | Laurolactam | |
47. | 19570 | 000999-21-3 | Maleic acid, diallyl ester | |
48. | 19600 | 000105-76-0 | Maleic acid, dibutyl ester | |
49. | 19990 | 000079-39-0 | Methacrylamide | |
50. | 20050 | 000096-05-9 | Methacrylic acid, allyl ester | |
51. | 20260 | 000101-43-9 | Methacrylic acid, cyclohexyl ester | |
52. | 20380 | 001189-08-8 | Methacrylic acid, diester with butan-1,3-diol | |
53. | 20410 | 002082-81-7 | Methacrylic acid, diester with butan-1,4-diol | |
54. | 20440 | 000097-90-5 | Methacrylic acid, diester with ethyleneglycol | |
55. | 20530 | 002867-47-2 | Methacrylic acid, 2-(dimethylamino)ethyl ester | |
56. | 20590 | 000106-91-2 | Methacrylic acid, 2,3-epoxypropyl ester | As item 16 |
57. | 21370 | 010595-80-9 | Methacrylic acid, 2-sulphoethyl ester | |
58. | 21400 | 054276-35-6 | Methacrylic acid, sulphopropyl ester | |
59. | 21520 | 001561-92-8 | Methallylsulphonic acid, sodium salt | The quantity of this substance in the finished plastic material or article shall not exceed 5 mg/kg |
60. | 21640 | 000078-79-5 | 2-Methylbut-1,3-diene | |
61. | 21730 | 000563-45-1 | 3-Methylbut-1-ene | |
62. | As item 17 | 000505-65-7 | 1,4-(Methylenedioxy)butane | |
63. | 21970 | 000923-02-4 | N-Methylolmethacrylamide | |
64. | 22210 | 000098-83-9 | alpha-Methylstyrene | |
65. | 22360 | 001141-38-4 | 2,6-Naphthalenedicarboxylic acid | |
66. | As item 31 | 000126-30-7 | Neopentylglycol | |
67. | 22428 | 051000-52-3 | Neodecanoic acid, vinyl ester | |
68. | 22720 | 000140-66-9 | 4-tert-Octylphenol | |
69. | 22900 | 000109-67-1 | Pent-1-ene | |
70. | 22937 | 001623-05-8 | Perfluoropropyl perfluorovinyl ether | |
71. | 23770 | 000504-63-2 | Propan-1,3-diol | |
72. | 23920 | 000105-38-4 | Propionic acid, vinyl ester | |
73. | 24370 | 000106-79-6 | Sebacic acid, dimethyl ester | |
74. | 24760 | 026914-43-2 | Styrenesulphonic acid | |
75. | 25380 | — | Trialkyl(C5-C15)acetic acid, vinyl ester (=vinyl versatate) | |
76. | 25390 | 000101-37-1 | Triallyl cyanurate | |
77. | 25450 | 026896-48-0 | Tricyclodecanedimethanol | |
78. | 25540 | 000528-44-9 | Trimellitic acid | The quantity of this substance alone or together with item 79 in the finished plastic material or article shall not exceed 5 mg/kg |
79. | 25550 | 000552-30-7 | Trimellitic anhydride | The quantity of this substance alone or together with item 78 in the finished plastic material or article shall not exceed 5 mg/kg (expressed as trimellitic acid) |
80. | 25810 | 015625-89-5 | 1,1,1-Trimethylolpropane triacrylate | |
81. | 25840 | 003290-92-4 | 1,1,1-Trimethylolpropane trimethacrylate | |
82. | 25900 | 000110-88-3 | Trioxane | |
83. | 26170 | 003195-78-6 | N-Vinyl-N-methylacetamide | The quantity of this substance in the finished plastic material or article shall not exceed 5 mg/kg |
Item | PM/REF No. | CAS No. | Name | Restrictions |
---|---|---|---|---|
1 | 2 | 3 | 4 | |
1. | 10160 | 002206-94-2 | alpha-Acetoxystyrene | |
2. | 10162 | 010521-96-7 | beta-Acetoxystyrene | |
3. | 10480 | — | Acids, aliphatic, monocarboxylic, saturated (C2-C24) | |
4. | 10510 | — | Acids, aliphatic, monocarboxylic, unsaturated (C3-C24) | |
5. | 10599/70 | — | Acids, fatty, unsaturated (C18) | |
6. | 10930 | 003066-71-5 | Acrylic acid, cyclohexyl ester | |
7. | 11050 | 001070-70-8 | Acrylic acid, diester with butan-1,4-diol | |
8. | 11180 | 017831-71-9 | Acrylic acid, diester with tetraethyleneglycol | |
9. | 11195 | 068901-05-3 | Acrylic acid, diester with tripropyleneglycol | |
10. | 11520 | 002918-23-2 | Acrylic acid, 2-hydroxyisopropyl ester (= acrylic acid, 2-hydroxy-1-methylethyl ester) | |
11. | 11560 | 005888-33-5 | Acrylic acid, isobornyl ester | |
12. | 11620 | 001330-61-6 | Acrylic acid, isodecyl ester | |
13. | 11650 | 029590-42-9 | Acrylic acid, isooctyl ester | |
14. | 11695 | 003121-61-7 | Acrylic acid, 2-methoxyethyl ester | |
15. | 11740 | 010095-13-3 | Acrylic acid, monoester with butan-1,3-diol | |
16. | 11770 | 002478-10-6 | Acrylic acid, monoester with butan-1,4-diol | |
17. | 11800 | 013533-05-6 | Acrylic acid, monoester with diethyleneglycol | |
18. | 12010 | 040074-09-7 | Acrylic acid, 2-sulphoethyl ester | |
19. | 12040 | 039121-78-3 | Acrylic acid, sulphopropyl ester | |
20. | 12055 | 094160-26-6 | Acrylic acid, triester with glycerol tris(2-hydroxypropyl) ether | |
21. | 12062 | 075577-70-7 | Acrylic acid, triester with 1,1,1-trimethylolpropane tris(2-hydroxyethyl) ether | |
22. | 12160 | 002998-04-1 | Adipic acid, diallyl ester | |
23. | 12190 | 000105-97-5 | Adipic acid, didecyl ester | |
24. | 12220 | 027178-16-1 | Adipic acid, diisodecyl ester | |
25. | 12250 | 000123-79-5 | Adipic acid, dioctyl ester | |
26. | 12370 | — | Alcohols, aliphatic, monohydric, saturated, linear, secondary or tertiary (C4-C22) | |
27. | 12610 | 000107-18-6 | Allyl alcohol | |
28. | 12700 | 000150-13-0 | p-Aminobenzoic acid | |
29. | 12790 | 000080-46-6 | p-tert-Amylphenol | |
30. | 12850 | 029602-44-6 | Azelaic acid,bis(2-hydroxyethyl) ester | |
31. | 13328 | 000104-38-1 | Bis(2-hydroxyethyl) ether of hydroquinone | |
32. | 13660 | 000584-03-2 | Butan-1,2-diol | |
33. | 13750 | 000513-85-9 | Butan-2,3-diol | |
34. | 13960 | 001852-16-0 | N-(Butoxymethyl)acrylamide | |
35. | 15020 | 002182-05-0 | Cyclohexyl vinyl ether | |
36. | 15280 | 000542-02-9 | 2,4-Diamino-6-methyl-1,3,5-triazine | |
37. | 15340 | 000109-76-2 | 1,3-Diaminopropane | |
38. | 15490 | 002215-89-6 | 4,4'-Dicarboxydiphenyl ether | |
39. | 15580 | 001653-19-6 | 2,3-Dichlorobuta-1,3-diene | |
40. | 16270 | 000526-75-0 | 2,3-Dimethylphenol | |
41. | 16300 | 000105-67-9 | 2,4-Dimethylphenol | |
42. | 16330 | 000095-87-4 | 2,5-Dimethylphenol | |
43. | 17040 | 000149-57-5 | 2-Ethylhexanoic acid | |
44. | 17350 | 000105-75-9 | Fumaric acid, dibutyl ester | |
45. | 18400 | 000592-42-7 | Hexa-1,5-diene | |
46. | 18905 | 002628-17-3 | 4-Hydroxystyrene | |
47. | 18970 | 000078-83-1 | Isobutanol | |
48. | 19030 | 016669-59-3 | N-(Isobutoxymethyl)acrylamide | |
49. | 19090 | 000078-84-2 | Isobutyraldehyde | |
50. | 19120 | 025339-17-7 | Isodecanol | |
51. | 19130 | 026896-18-4 | Isononanoic acid | |
52. | 19936 | 007423-42-9 | Maleic acid, mono(2-ethylhexyl) ester | |
53. | 20470 | 025852-47-5 | Methacrylic acid, diester with polyethyleneglycol | |
54. | 20740 | 039670-09-2 | Methacrylic acid, ester with ethoxytriethyleneglycol | |
55. | 20950 | 000923-26-2 | Methacrylic acid,2-hydroxypropyl ester | |
56. | 21115 | 000816-74-0 | Methacrylic acid, methallyl ester | |
57. | 21220 | 032360-05-7 | Methacrylic acid, octadecyl ester | |
58. | 21760 | 000694-91-7 | 5-Methylenebicyclo[2.2.1]hept-2-ene | |
59. | 21837 | 001116-90-1 | 4-Methylhexa-1,4-diene | The specific migration of this substance shall be not detectable (when measured by a method with a limit of detection of 0.05 mg/kg) |
60. | 22240 | 000622-97-9 | p-Methylstryrene | |
61. | 22270 | 000107-25-5 | Methyl vinyl ether | |
62. | 22540 | 000104-40-5 | 4-Nonylphenol | |
63. | 22585 | 003710-30-3 | Octa-1, 7-diene | |
64. | 22932 | 001187-93-5 | Perfluoromethyl perfluorovinyl ether | |
65. | 23530 | 025190-06-1 | Poly(1,4-butyleneglycol) (molecular weight greater than 1,000) | |
66. | 23650 | 025322-69-4 | Polypropleneglycol (molecular weight greater than 400) | |
67. | 24560 | 000111-63-7 | Stearic acid, vinyl ester | |
68. | 25030 | 016646-44-9 | Tetra(allyloxy)ethane | |
69. | 25161 | 000085-43-8 | 1,2,3,6-Tetrahydrophthalic anhydride | |
70. | 25300 | 000088-19-7 | o-Toluenesulphonamide | |
71. | 25480 | 000102-71-6 | Triethanolamine | |
72. | 26290 | 025013-15-4 | Vinyltoluene | |
73. | 26320 | 002768-02-7 | Vinyltrimethoxysilane | The quantity of this substance in the finished plastic material or article shall not exceed 5 mg/kg |
1. In regulation 4 and Part I of this Schedule—
(a)the PM/REF No. of any substance is its EEC packaging material reference number,
(b)the CAS No. of any substance is its CAS (Chemical Abstracts Service) Registry Number,
(c)the name of any substance is its chemical name, and to the extent that there is any inconsistency between the CAS No. and the name, the name shall take precedence over the CAS No., and
(d)references to specific migration are to be taken to mean specific migration as measured in accordance with Schedules 3 and 4.
2. If a substance appearing in Part I of this Schedule as an individual compound also falls within a generic term which appears therein, the restriction (if any) applying to that substance shall be that indicated for the individual compound and the entry applying to the generic term shall be treated as varied to such extent (if any) as is necessary therefor.
3.—(1) The items identified in Part I of this Schedule shall be taken to include—
(a)substances undergoing polymerisation (which shall be taken to include polycondensation, polyaddition or any other similar process) to manufacture macromolecules,
(b)natural or synthetic macromolecular substances used in the manufacture of modified macromolecules, if the monomers required to synthesize them are not so identified, and
(c)substances used to modify existing natural or synthetic macromolecular substances.
(2) If a substance identified in Part I of this Schedule is an acid, a phenol or an alcohol and has salts (including double salts) of one or more of the following names (that is to say salts (including double salts) of aluminium, ammonium, calcium, iron, magnesium, potassium, sodium or zinc), then any such salts (including double salts) shall be treated as included in the specification of that substance.
(3) If, as indicated in paragraph 2 of Annex II to the Directive, a substance is identified in Part I of this Schedule as an “ ... ... ... ... acid, salt” and has salts of one or more of the following names (that is to say salts of aluminium, ammonium, calcium, iron, magnesium, potassium, sodium or zinc), then the free acid corresponding to that substance is not treated as included in the specification of that substance.
Regulation 5
Item | PM/REF No. | CAS No. | Name |
---|---|---|---|
1 | 2 | 3 | |
1. | 30000 | 000064-19-7 | Acetic acid |
2. | 30045 | 000123-86-4 | Acetic acid, butyl ester |
3. | 30140 | 000141-78-6 | Acetic acid, ethyl ester |
4. | 30280 | 000108-24-7 | Acetic anhydride |
5. | 30295 | 000067-64-1 | Acetone |
6. | 30370 | — | Acetylacetic acid, salts |
7. | 30400 | — | Acetylated glycerides |
8. | 30960 | — | Acids, aliphatic, monocarboxylic (C6-C22), esters with polyglycerol |
9. | 31328 | — | Acids, fatty, from animal or vegetable food fats and oils |
10. | 31730 | 000124-04-9 | Adipic acid |
11. | 33120 | — | Alcohols, aliphatic, monohydric, saturated, linear, primary (C4-C24) |
12. | 33350 | 009005-32-7 | Alginic acid |
13. | 34281 | — | Alkyl(C8-C22) sulphuric acids, linear, primary, with an even number of carbon atoms |
14. | 34475 | — | Aluminium calcium hydroxide phosphite, hydrate |
15. | 34480 | — | Aluminium fibres, flakes and powders |
16. | 34560 | 021645-51-2 | Aluminium hydroxide |
17. | 34690 | 011097-59-9 | Aluminium magnesium carbonate hydroxide |
18. | 34720 | 001344-28-1 | Aluminium oxide |
19. | 35120 | 013560-49-1 | 3-Aminocrotonic acid, diester with thiobis(2-hydroxyethyl) ether |
20. | 35320 | 007664-41-7 | Ammonia |
21. | 35440 | 012124-97-9 | Ammonium bromide |
22. | 35600 | 001336-21-6 | Ammonium hydroxide |
23. | 35840 | 000506-30-9 | Arachidic acid |
24. | 35845 | 007771-44-0 | Arachidonic acid |
25. | 36000 | 000050-81-7 | Ascorbic acid |
26. | 36080 | 000137-66-6 | Ascorbyl palmitate |
27. | 36160 | 010605-09-1 | Ascorbyl stearate |
28. | 36880 | 008012-89-3 | Beeswax |
29. | 36960 | 003061-75-4 | Behenamide |
30. | 37040 | 000112-85-6 | Behenic acid |
31. | 37280 | 001302-78-9 | Bentonite |
32. | 37600 | 000065-85-0 | Benzoic acid |
33. | 37680 | 000136-60-7 | Benzoic acid, butyl ester |
34. | 37840 | 000093-89-0 | Benzoic acid, ethyl ester |
35. | 38080 | 000093-58-3 | Benzoic acid, methyl ester |
36. | 38160 | 002315-68-6 | Benzoic acid, propyl ester |
37. | 38950 | 079072-96-1 | Bis(4-ethylbenzylidene) sorbitol |
38. | 39890 | 087826-41-3 | Bis(methylbenzylidene) sorbitol |
069158-41-4 | ” ” ” ” ” | ||
054686-97-4 | ” ” ” ” ” | ||
39. | 40400 | 010043-11-5 | Boron nitride |
40. | 40570 | 000106-97-8 | Butane |
41. | 41040 | 005743-36-2 | Calcium butyrate |
42. | 41280 | 001305-62-0 | Calcium hydroxide |
43. | 41520 | 001305-78-8 | Calcium oxide |
44. | 41600 | 012004-14-7 | Calcium sulphoaluminate |
037293-22-4 | ” ” ” ” ” | ||
45. | 41760 | 008006-44-8 | Candelilla wax |
46. | 41960 | 000124-07-2 | Caprylic acid |
47. | 42160 | 000124-38-9 | Carbon dioxide |
48. | 42500 | — | Carbonic acid, salts |
49. | 42640 | 009000-11-7 | Carboxymethylcellulose |
50. | 42720 | 008015-86-9 | Carnauba wax |
51. | 42800 | 009000-71-9 | Casein |
52. | 42960 | 064147-40-6 | Castor oil, dehydrated |
53. | 43200 | — | Castor oil, mono- and diglycerides |
54. | 43280 | 009004-34-6 | Cellulose |
55. | 43300 | 009004-36-8 | Cellulose acetate butyrate |
56. | 43360 | 068442-85-3 | Cellulose, regenerated |
57. | 43440 | 008001-75-0 | Ceresin |
58. | 44160 | 000077-92-9 | Citric acid |
59. | 44640 | 000077-93-0 | Citric acid, triethyl ester |
60. | 45280 | — | Cotton fibres |
61. | 45560 | 014464-46-1 | Cristobalite |
62. | 45760 | 000108-91-8 | Cyclohexylamine |
63. | 45920 | 009000-16-2 | Dammar |
64. | 45940 | 000334-48-5 | n-Decanoic acid |
65. | 46070 | 010016-20-3 | alpha-Dextrin |
66. | 46080 | 007585-39-9 | beta-Dextrin |
67. | 46375 | 061790-53-2 | Diatomaceous earth |
68. | 46380 | 068855-54-9 | Diatomaceous earth, soda ash flux-calcined |
69. | 46480 | 032647-67-9 | Dibenzylidene sorbitol |
70. | 46790 | 004221-80-1 | 3,5-Di-tert-butyl-4-hydroxybenzoic acid, 2,4-di-tert-butylphenyl ester |
71. | 46800 | 067845-93-6 | 3,5-Di-tert-butyl-4-hydroxybenzoic acid, hexadecyl ester |
72. | 46870 | 003135-18-0 | 3,5-Di-tert-butyl-4-hydroxybenzylphosphonic acid, dioctadecyl ester |
73. | 47440 | 000461-58-5 | Dicyanodiamide |
74. | 49540 | 000067-68-5 | Dimethyl sulphoxide |
75. | 51200 | 000126-58-9 | Dipentaerythritol |
76. | 51760 | 025265-71-8 | Dipropyleneglycol |
000110-98-5 | ” ” | ||
77. | 52640 | 016389-88-1 | Dolomite |
78. | 52720 | 000112-84-5 | Erucamide |
79. | 52730 | 000112-86-7 | Erucic acid |
80. | 52800 | 000064-17-5 | Ethanol |
81. | 53270 | 037205-99-5 | Ethylcarboxymethylcellulose |
82. | 53280 | 009004-57-3 | Ethylcellulose |
83. | 53360 | 000110-31-6 | N,N'-Ethylenebisoleamide |
84. | 53440 | 005518-18-3 | N,N'-Ethylenebispalmitamide |
85. | 53520 | 000110-30-5 | N,N'-Ethylenebisstearamide |
86. | 53600 | 000060-00-4 | Ethylenediaminetetraacetic acid |
87. | 54005 | 005136-44-7 | Ethylene-N-palmitamide-N'-stearamide |
88. | 54260 | 009004-58-4 | Ethylhydroxyethylcellulose |
89. | 54270 | — | Ethylhydroxymethylcellulose |
90. | 54280 | — | Ethylhydroxypropylcellulose |
91. | 54450 | — | Fats and oils, from animal or vegetable food sources |
92. | 54480 | — | Fats and oils, hydrogenated, from animal or vegetable food sources |
93. | 55040 | 000064-18-6 | Formic acid |
94. | 55120 | 000110-17-8 | Fumaric acid |
95. | 55190 | 029204-02-2 | Gadoleic acid |
96. | 55440 | 009000-70-8 | Gelatine |
97. | 55520 | — | Glass fibres |
98. | 55600 | — | Glass microballs |
99. | 55680 | 000110-94-1 | Glutaric acid |
100. | 55920 | 000056-81-5 | Glycerol |
101. | 56020 | 099880-64-5 | Glycerol dibehenate |
102. | 56360 | — | Glycerol, esters with acetic acid |
103. | 56486 | — | Glycerol, esters with acids, aliphatic, saturated, linear, with an even number of carbon atoms (C14-C18) and with acids, aliphatic, unsaturated, linear, with an even number of carbon atoms (C16-C18) |
104. | 56487 | — | Glycerol, esters with butyric acid |
105. | 56490 | — | Glycerol, esters with erucic acid |
106. | 56495 | — | Glycerol, esters with 12-hydroxystearic acid |
107. | 56500 | — | Glycerol, esters with lauric acid |
108. | 56510 | — | Glycerol, esters with linoleic acid |
109. | 56520 | — | Glycerol, esters with myristic acid |
110. | 56540 | — | Glycerol, esters with oleic acid |
111. | 56550 | — | Glycerol, esters with palmitic acid |
112. | 56565 | — | Glycerol, esters with nonanoic acid |
113. | 56570 | — | Glycerol, esters with propionic acid |
114. | 56580 | — | Glycerol, esters with ricinoleic acid |
115. | 56585 | — | Glycerol, esters with stearic acid |
116. | 56610 | 030233-64-8 | Glycerol monobehenate |
117. | 56720 | 026402-23-3 | Glycerol monohexanoate |
118. | 56800 | 030899-62-8 | Glycerol monolaurate diacetate |
119. | 56880 | 026402-26-6 | Glycerol monooctanoate |
120. | 57040 | — | Glycerol monooleate, ester with ascorbic acid |
121. | 57120 | — | Glycerol monooleate, ester with citric acid |
122. | 57200 | — | Glycerol monopalmitate, ester with ascorbic acid |
123. | 57280 | — | Glycerol monopalmitate, ester with citric acid |
124. | 57600 | — | Glycerol monostearate, ester with ascorbic acid |
125. | 57680 | — | Glycerol monostearate, ester with citric acid |
126. | 57920 | 000620-67-7 | Glycerol triheptanoate |
127. | 58300 | — | Glycine, salts |
128. | 58320 | 007782-42-5 | Graphite |
129. | 58400 | 009000-30-0 | Guar gum |
130. | 58480 | 009000-01-5 | Gum arabic |
131. | 58720 | 000111-14-8 | Heptanoic acid |
132. | 59360 | 000142-62-1 | Hexanoic acid |
133. | 59760 | 019569-21-2 | Huntite |
134. | 59990 | 007647-01-0 | Hydrochloric acid |
135. | 60030 | 012072-90-1 | Hydromagnesite |
136. | 60080 | 012304-65-3 | Hydrotalcite |
137. | 60160 | 000120-47-8 | 4-Hydroxybenzoic acid, ethyl ester |
138. | 60180 | 004191-73-5 | 4-Hydroxybenzoic acid, isopropyl ester |
139. | 60200 | 000099-76-3 | 4-Hydroxybenzoic acid, methyl ester |
140. | 60240 | 000094-13-3 | 4-Hydroxybenzoic acid, propyl ester |
141. | 60560 | 009004-62-0 | Hydroxyethylcellulose |
142. | 60880 | 009032-42-2 | Hydroxyethylmethylcellulose |
143. | 61120 | 009005-27-0 | Hydroxyethyl starch |
144. | 61390 | 037353-59-6 | Hydroxymethylcellulose |
145. | 61680 | 009004-64-2 | Hydroxypropylcellulose |
146. | 61800 | 009049-76-7 | Hydroxypropyl starch |
147. | 61840 | 000106-14-9 | 12-Hydroxystearic acid |
148. | 62140 | 006303-21-5 | Hypophosphorous acid |
149. | 62240 | 001332-37-2 | Iron oxide |
150. | 62450 | 000078-78-4 | Isopentane |
151. | 62640 | 008001-39-6 | Japan wax |
152. | 62720 | 001332-58-7 | Kaolin |
153. | 62800 | — | Kaolin, calcined |
154. | 62960 | 000050-21-5 | Lactic acid |
155. | 63040 | 000138-22-7 | Lactic acid, butyl ester |
156. | 63280 | 000143-07-7 | Lauric acid |
157. | 63760 | 008002-43-5 | Lecithin |
158. | 63840 | 000123-76-2 | Levulinic acid |
159. | 63920 | 000557-59-5 | Lignoceric acid |
160. | 64015 | 000060-33-3 | Linoleic acid |
161. | 64150 | 028290-79-1 | Linolenic acid |
162. | 64500 | — | Lysine, salts |
163. | 64640 | 001309-42-8 | Magnesium hydroxide |
164. | 64720 | 001309-48-4 | Magnesium oxide |
165. | 65020 | 006915-15-7 | Malic acid |
166. | 65040 | 000141-82-2 | Malonic acid |
167. | 65520 | 000087-78-5 | Mannitol |
168. | 66200 | 037206-01-2 | Methylcarboxymethylcellulose |
169. | 66240 | 009004-67-5 | Methylcellulose |
170. | 66640 | 009004-59-5 | Methylethylcellulose |
171. | 66695 | — | Methylhydroxymethylcellulose |
172. | 66700 | 009004-65-3 | Methylhydroxypropylcellulose |
173. | 67120 | 012001-26-2 | Mica |
174. | 67200 | 001317-33-5 | Molybdenum disulphide |
175. | 67840 | — | Montanic acids and/or their esters with ethyleneglycol and/or with 1,3-butanediol and/or with glycerol |
176. | 67850 | 008002-53-7 | Montan wax |
177. | 67891 | 000544-63-8 | Myristic acid |
178. | 68040 | 003333-62-8 | 7-[2H-Naphtho-(1,2-D)triazol-2-yl]-3-phenylcoumarin |
179. | 68125 | 068187-64-4 | Nepheline syenite |
180. | 68960 | 000301-02-0 | Oleamide |
181. | 69040 | 000112-80-1 | Oleic acid |
182. | 69760 | 000143-28-2 | Oleyl alcohol |
183. | 70000 | 070331-94-1 | 2,2'-Oxamidobis[ethyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] |
184. | 70240 | 012198-93-5 | Ozokerite |
185. | 70400 | 000057-10-3 | Palmitic acid |
186. | 71020 | 000373-49-9 | Palmitoleic acid |
187. | 71440 | 009000-69-5 | Pectin |
188. | 71600 | 000115-77-5 | Pentaerythritol |
189. | 71680 | 006683-19-8 | Pentaerythritol tetrakis [3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] |
190. | 71720 | 000109-66-0 | Pentane |
191. | 72640 | 007664-38-2 | Phosphoric acid |
192. | 74240 | 031570-04-4 | Phosphorous acid, tris(2,4-di-tert-butylphenyl) ester |
193. | 74480 | 000088-99-3 | o-Phthalic acid |
194. | 76320 | 000085-44-9 | Phthalic anhydride |
195. | 76720 | 009016-00-6 | Polydimethylsiloxane |
063148-62-9 | ” ” ” | ||
196. | 76960 | 025322-68-3 | Polyethyleneglycol |
197. | 77600 | 061788-85-0 | Polyethyleneglycol ester of hydrogenated castor oil |
198. | 77702 | — | Polyethyleneglycol esters of aliphatic moncarboxylic acids (C6-C22), and their ammonium and sodium sulphates |
199. | 79040 | 009005-64-5 | Polyethleneglycol sorbitan monolaurate |
200. | 79120 | 009005-65-6 | Polyethyleneglycol sorbitan monooleate |
201. | 79200 | 009005-66-7 | Polyethyleneglycol sorbitan monopalmitate |
202. | 79280 | 009005-67-8 | Polyethyleneglycol sorbitan monostearate |
203. | 79360 | 009005-70-3 | Polyethyleneglycol sorbitan trioleate |
204. | 79440 | 009005-71-4 | Polyethyleneglycol sorbitan tristearate |
205. | 80240 | 029894-35-7 | Polyglycertol ricinoleate |
206. | 80640 | — | Polyoxyalkl(C2-C4)dimethylpolysiloxane |
207. | 80720 | 008017-16-1 | Polyphosphoric acids |
208. | 80800 | 025322-69-4 | Polypropyleneglycol |
209. | 81520 | 007758-02-3 | Potassium bromide |
210. | 81600 | 001310-58-3 | Potassium hydroxide |
211. | 81840 | 000057-55-6 | 1,2-Propanediol |
212. | 81882 | 000067-63-0 | 2-Propanol |
213. | 82000 | 000079-09-4 | Propionic acid |
214. | 82080 | 009005-37-2 | 1,2-Propyleneglycol alginate |
215. | 82240 | 022788-19-8 | 1,2-Propyleneglycol dilaurate |
216. | 82400 | 000105-62-4 | 1,2-Propyleneglycol dioleate |
217. | 82560 | 033587-20-1 | 1,2-Propyleneglycol dipalmitate |
218. | 82720 | 006182-11-2 | 1,2-Propyleneglycol distearate |
219. | 82800 | 027194-74-7 | 1,2-Propyleneglycol monolaurate |
220. | 82960 | 001330-80-9 | 1,2-Propyleneglycol monooleate |
221. | 83120 | 029013-28-3 | 1,2-Propyleneglycol monopalmitate |
222. | 83300 | 001323-39-3 | 1,2-Propyleneglycol monostearate |
223. | 83320 | — | Propylhydroxyethylcellulose |
224. | 83325 | — | Propylhydroxymethylcellulose |
225. | 83330 | — | Propylhydroxypropylcellulose |
226. | 83440 | 002466-09-3 | Pyrophosphoric acid |
227. | 83455 | 013445-56-2 | Pyrophosphorous acid |
228. | 83460 | 012269-78-2 | Pyrophyllite |
229. | 83470 | 014808-60-7 | Quartz |
230. | 83610 | 073138-82-6 | Resin acids and rosin acids |
231. | 83840 | 008050-09-7 | Rosin |
232. | 84000 | 008050-31-5 | Rosin, ester with glycerol |
233. | 84080 | 008050-26-8 | Rosin, ester with pentaerythritol |
234. | 84210 | 065997-06-0 | Rosin, hydrogenated |
235. | 84240 | 065997-13-9 | Rosin, hydrogenated, ester with glycerol |
236. | 84320 | 008050-15-5 | Rosin, hydrogenated, ester with methanol |
237. | 84400 | 064365-17-9 | Rosin, hydrogenated, ester with pentaerythritol |
238. | 84560 | 009006-04-6 | Rubber, natural |
239. | 84640 | 000069-72-7 | Salicylic acid |
240. | 85600 | — | Silicates, natural |
241. | 85980 | — | Silicic acid, salts |
242. | 86000 | — | Silicic acid, silylated |
243. | 86160 | 000409-21-2 | Silicon carbide |
244. | 86240 | 007631-86-9 | Silicon dioxide |
245. | 86560 | 007647-15-6 | Sodium bromide |
246. | 86720 | 001310-73-2 | Sodium hydroxide |
247. | 87200 | 000110-44-1 | Sorbic acid |
248. | 87280 | 029116-98-1 | Sorbitan dioleate |
249. | 87520 | 062568-11-0 | Sorbitan monobehenate |
250. | 87600 | 001338-39-2 | Sorbitan monolaurate |
251. | 87680 | 001338-43-8 | Sorbitan monooleate |
252. | 87760 | 026266-57-9 | Sorbitan monopalmitate |
253. | 87840 | 001338-41-6 | Sorbitan monostearate |
254. | 87920 | 061752-68-9 | Sorbitan tetrastearate |
255. | 88080 | 026266-58-0 | Sorbitan trioleate |
256. | 88160 | 054140-20-4 | Sorbitan tripalmitate |
257. | 88240 | 026658-19-5 | Sorbitan tristearate |
258. | 88320 | 000050-70-4 | Sorbitol |
259. | 88600 | 026836-47-5 | Sorbitol monostearate |
260. | 88800 | 009005-25-8 | Starch, edible |
261. | 88880 | 068412-29-3 | Starch, hydrolysed |
262. | 88960 | 000124-26-5 | Stearamide |
263. | 89040 | 000057-11-4 | Stearic acid |
264. | 90720 | 058446-52-9 | Stearoylbenzoylmethane |
265. | 90800 | 005793-94-2 | Stearoyl-2-lactylic acid, calcium salt |
266. | 90960 | 000110-15-6 | Succinic acid |
267. | 91200 | 000126-13-6 | Sucrose acetate isobutyrate |
268. | 91360 | 000126-14-7 | Sucrose octaacetate |
269. | 91840 | 007704-34-9 | Sulphur |
270. | 91920 | 007664-93-9 | Sulphuric acid |
271. | 92080 | 014807-96-6 | Talc |
272. | 92160 | 000087-69-4 | Tartaric acid |
273. | 92195 | — | Taurine, salts |
274. | 92205 | 057569-40-1 | Terephthalic acid, diester with 2,2'-methylenebis(4-methyl-6-tert-butylphenol) |
275. | 92350 | 000112-60-7 | Tetraethyleneglycol |
276. | 92640 | 000102-60-3 | N,N,N',N'-Tetrakis(2-hydroxypropyl)ethylenediamine |
277. | 93440 | 013463-67-7 | Titanium dioxide |
278. | 93520 | 000059-02-9 | alpha-Tocopherol |
010191-41-0 | ” ” | ||
279. | 93680 | 009000-65-1 | Tragacanth gum |
280. | 94320 | 000112-27-6 | Triethyleneglycol |
281. | 95200 | 001709-70-2 | 1,3,5-Trimethyl-2,4,6-tris(3,5-di-tert-butyl-4-hydroxybenzyl)benzene |
282. | 95905 | 013983-17-0 | Wollastonite |
283. | 95920 | — | Wood flour and fibres, untreated |
284. | 95935 | 011138-66-2 | Xanthan gum |
285. | 96190 | 020427-58-1 | Zinc hydroxide |
286. | 96240 | 001314-13-2 | Zinc oxide |
287. | 96320 | 001314-98-3 | Zinc sulphide |
1. In regulation 5 and Part I of this Schedule—
(a)the PM/REF No. of any additive is its EEC packaging material reference number,
(b)the CAS No. of any additive is its CAS (Chemical Abstracts Service) Registry Number, and
(c)the name of any additive is its chemical name, and to the extent that there is any inconsistency between the CAS No. and the name, the name shall take precedence over the CAS No.
2. If a substance identified in Part I of this Schedule is an acid, a phenol or an alcohol and has salts (including double salts) of one or more of the following names (that is to say salts (including double salts) of aluminium, ammonium, calcium, iron, magnesium, potassium, sodium or zinc), then any such salts (including double salts) shall be treated as included in the specification of that substance.
3. If, as indicated in paragraph 2 of Annex III to the Directive, a substance is identified in Part I of this Schedule as an “. . . acid, salt” and has salts of one or more of the following names (that is to say, salts of aluminium, ammonium, calcium, iron, magnesium, potassium, sodium or zinc), then the free acid corresponding to that substance is not treated as included in the specification of that substance.
Regulations 6 and 7
1. When the results of the migration tests specified in this Schedule and, where appropriate, Schedule 4 are analytically determined the specific gravity of any simulants used shall be assumed to be 1, so that milligrams of any substance released per litre of simulant will correspond numerically to milligrams of that substance released per kilogram of that simulant.
2. Where any migration test specified in this Schedule and, where appropriate, Schedule 4 is carried out on any sample taken from any plastic material or article and the quantities of food or simulant placed in contact with the sample differ from those employed in the actual conditions under which the plastic material or article is used or is to be used, the results obtained should be corrected by applying the following formula:
Where:
M is the migration in mg/kg;
m is the mass in mg of substance released by the sample as determined by the migration test;
a1 is the surface area in square decimetres of the sample in contact with the food or simulant during the migration test;
a2 is the surface area in square decimetres of the plastic material or article in actual conditions of use;
q is the quantity in grams of food in contact with the plastic material or article in actual conditions of use.
3.—(1) Subject to sub-paragraph (2) below, any testing of migration from any plastic material or article shall be carried out on that plastic material or article.
(2) In any case where determination in accordance with sub-paragraph (1) above is impracticable, such testing shall be carried out, using either specimens taken from that plastic material or article or, where appropriate, specimens representative of that plastic material or article.
(3) Any sample used for such testing shall be placed in contact with the simulant or food, as the case may be, in a manner representing the contact conditions in actual use, and, for this purpose, the testing shall be carried out in such a way that only those parts of the sample intended to come into contact with food in actual use will be in contact with the simulant or food.
(4) Any migration testing of caps, gaskets, stoppers or similar devices for sealing shall be carried out on these articles by applying them to the containers for which they are intended in a manner which corresponds to the conditions of closing in normal or foreseeable use.
4.—(1) Any sample of a plastic material or article shall be placed in contact with the appropriate simulant or the food for a period and at a temperature which are chosen by reference to the contact conditions in actual use in accordance with the provisions of this Schedule and, where appropriate, Schedule 4.
(2) At the end of the period referred to in sub-paragraph (1) above, analytical determination of the total quantity of substances (overall migration), each specific quantity of a substance (specific migration) or, as the case may be, both that total and that specific quantity released by the sample shall be carried out on the simulant or food, as the case may be.
(3) Verification that migration into food complies with a migration limit specified in regulation 7 or Schedule 1 shall be carried out under the most extreme conditions of time and temperature foreseeable in actual use in accordance with the provisions of this Schedule.
(4) Verification that migration into food simulants complies with a migration limit specified in regulation 7 or Schedule 1 shall be carried out in accordance with the provisions of this Schedule and using conventional migration tests, the basic rules for which are set out in Schedule 4.
5. Where a plastic material or article is intended to come into repeated contact with food, any migration test shall (subject to paragraph 7 below) be carried out three times on a single sample in accordance with the conditions laid down in this Schedule and, where appropriate, Schedule 4 using separate samples of the simulant or, as the case may be, food on each occasion, and the level of the migration found in the third test shall be treated as the level relevant to that test.
6.—(1) Subject to sub-paragraph (2) below, any method of analytical determination may be used to prove excess of an overall migration limit in relation to a plastic material or article.
(2) In any proceedings for an offence under these Regulations where it is alleged that a plastic material or article does not comply with regulation 7 it shall be a defence for the person charged to prove that—
(a)if an aqueous simulant specified in Schedule 4 had been used, and the analytical determination of the total quantity of substances released by a sample of the plastic material or article tested had been carried out by evaporation of the simulant and weighing of the residue, or
(b)if rectified olive oil or any of its substitutes had been used as a simulant and—
(i)a sample of the plastic material or article had been weighed before and after contact with the simulant,
(ii)the simulant absorbed by the sample had been extracted and determined quantitatively,
(iii)the quantity of simulant so found had been subtracted from the weight of the sample measured after contact with the simulant, and
(iv)the difference between the initial and corrected final weights had been determined to represent the overall migration of the sample examined,
there would have been no such excess so determined.
7.—(1) Where a plastic material or article is intended to come into repeated contact with food and it is technically impossible to carry out the test described in paragraph 5 above, the test shall be so modified as to enable the level of migration occurring during the third such test to be determined and, subject to sub-paragraph (2) below, such a determination may be used to prove excess of an overall migration limit in relation to a plastic material or article.
(2) In any proceedings for an offence under these Regulations where it is alleged, following determination under sub-paragraph (1) above, that a plastic material or article does not comply with regulation 7 it shall be a defence for the person charged to prove that, if—
(a)three identical samples of the plastic material or article had been procured,
(b)one of them had been subjected to the appropriate test according with paragraph 4 above and the overall migration determined (M1),
(c)the second and third samples had been subjected to the same conditions of temperature but the period of contact had been two and three times that specified and overall migration had been determined in each case (M1 and M2 respectively), and
(d)the plastic material or article had been deemed to comply with the overall migration limit relevant to it provided that either M1 or M2-M3 did not exceed that overall migration limit,
the plastic material or article would not have been deemed to exceed that limit.
8.—(1) Any plastic material or article which exceeds its overall migration limit by an amount not exceeding the analytical tolerance specified in sub-paragraph (2) below shall be deemed for the purposes of these Regulations not to exceed its overall migration limit.
(2) The following analytical tolerances shall be applied for limits of overall migration—
(a)20 mg/kg or, as the case may be, 3 milligrams per square decimetre in migration tests using as a simulant rectified olive oil or substitutes,
(b)6 mg/kg or, as the case may be, 1 milligram per square decimetre in migration tests using other simulants referred to in Schedule 4.
Regulations 6 and 7
1. Subject to paragraphs 2, 3 and 4 of this Part of this Schedule, migration tests for the determination of specific and overall migration shall be carried out using the food simulants specified in Parts II, III and, where appropriate, IV of this Schedule and under conventional migration test conditions as specified in Part V of this Schedule.
2. Subject to paragraphs 3 and 4 of this Part of this Schedule, substitute tests which use test media under the conventional substitute test conditions as specified in Part VI of this Schedule shall be carried out if the migration test using the fatty food simulants specified in Part III of this Schedule is not feasible for technical reasons connected with the method of analysis.
3. Subject to paragraph 4 of this Part of this Schedule, alternative tests as specified in Part VII of this Schedule may be used instead of the migration test with fatty food simulants specified in Part III of this Schedule but the results of such alternative tests may not be used to determine compliance with a migration limit unless the conditions specified in Part VII of this Schedule are fulfilled.
4. In migration testing it is permissible to—
(a)reduce the number of tests to be carried out to that or those which, in the specific case under examination, is or are generally recognised to be the most severe on the basis of scientific evidence;
(b)omit the migration, the substitute or the alternative tests where there is conclusive proof that the migration limits cannot be exceeded in any foreseeable conditions of use of the material or article.
1. Subject to Parts III, IV, V, VI and VII of this Schedule, the simulants to be used in migration testing are specified in the Table to this paragraph (referred to in this Part of this Schedule as “the Table”).
Abbreviation | Food Simulant |
---|---|
Simulant A: | Distilled water or water of equivalent quality |
Simulant B: | 3% Acetic acid (w/v) in aqueous solution |
Simulant C: | 10% Ethanol (v/v) in aqueous solution save that the concentration of ethanol solution shall be adjusted to the actual alcoholic strength of the food if it exceeds 10% (v/v) |
Simulant D: | Rectified olive oil having the characteristics specified in paragraph 3 of this Part of this Schedule or, subject to paragraph 5 of this Part of this Schedule, any of the fatty food simulants specified in paragraph 4 of this Part of this Schedule |
2. For the purposes of this Schedule a reference to an abbreviation in column 1 of the Table shall mean a reference to the simulant in column 1 of that Table opposite that abbreviation.
3. The characteristics of rectified olive oil referred to in the Table are as hereinafter described—
Iodine value (Wijs) = 80 to 88
Refractive index at 25°C = 1.4665 to 1.4679
Acidity (expressed as % of oleic acid) = 0.5% maximum
Peroxide number (expressed as oxygen milliequivalents per kg of oil) = 10 maximum
4. The fatty food simulants referred to in the Table are—
(a)corn oil with standardised specifications;
(b)sunflower oil the characteristics of which are—
Iodine value (Wijs) = 120 to 145
Refractive index at 20°C = 1.474 to 1.476
Saponification number = 188 to 193
Relative density at 20°C = 0.918 to 0.925
Unsaponifiable matter = 0.5% to 1.5%; and
(c)a synthetic mixture of triglycerides the composition of which is as follows—
(i)fatty acid distribution
No. of C-atoms in fatty acid residue | 6 | 8 | 10 | 12 | 14 | 16 | 18 | others |
GLC area (%) | ∼1 | 6–9 | 8–11 | 45–52 | 12–15 | 8–10 | 8–12 | <=1 |
(ii)purity
Content of monoglycerides (enzymatically) | <=0.2% |
Content of diglycerides (enzymatically) | <=2.0% |
Unsaponifiable matter | <=0.2% |
Iodine value (Wijs) | <=0.1% |
Acid value | <=0.1% |
Water content (K. Fischer) | <=0.1% |
Melting point | 28 ± 2°C |
(iii)typical absorption spectrum (thickness of layer: d = 1 cm; Reference: water at 35°C)
Wavelength (nm) | 290 | 310 | 330 | 350 | 370 | 390 | 430 | 470 | 510 |
Transmittance (%) | ∼2 | ∼15 | ∼37 | ∼64 | ∼80 | ∼88 | ∼95 | ∼97 | ∼98 |
At least 10% light transmittance at 310 nm
5. Where a fatty food simulant specified in paragraph 4 of this Part of this Schedule is used in migration testing and the result of that test shows that a plastic material or article does not comply with any migration limit specified in regulation 7 or Schedule 1 verification that the plastic material or article does not comply with the specified migration limit shall be carried out by testing that material or article using olive oil if such testing is technically feasible and if such testing is not technically feasible the plastic material or article shall be deemed not to comply with the specified migration limit.
1. The testing of plastic materials and articles shall be carried out under the test conditions specified in Part V of this Schedule using a simulant or simulants selected in accordance with this Part of this Schedule and taking a new test specimen of the plastic material or article for each simulant used.
2.—(1) Where a test is carried out on a plastic material or article intended to come into contact with more than one food or group of foods and a reduction factor is specified for one or more of those foods or groups of foods which is not equivalent to the reduction factor specified for one or more of the other foods or groups of foods with which the plastic material or article is intended to come into contact—
(a)the reduction factor specified for each food or group of foods, as appropriate, shall be applied to the test result; and
(b)the plastic material or article shall be treated as being capable of transferring its constituents to food with which it may come into contact in excess of a migration limit specified in regulation 7 or Schedule 1 if, following application of the specified reduction factors, one or more of the results show that the material or article does not comply with that specified migration limit.
(2) For the purposes of this paragraph—
(a)a reduction factor is the figure which follows an “X” and oblique stroke in the group of columns headed “Simulants to be used” in the Table to Part IV of this Schedule;
(b)a reduction factor is specified for a food or group of foods where, in the Table to Part IV of this Schedule—
(i)the food or group of foods is described in the column headed “Description of food”; and
(ii)“X” is placed in a column headed by a specified simulant opposite that food or group of foods followed by an oblique stroke and a reduction factor; and
(c)a reduction factor shall be applied to a test result by dividing the result by that reduction factor.
3. Food types are defined in the Table to this paragraph (referred to in this Part of this Schedule as “Table 1”).
Definition | Meaning |
---|---|
Aqueous foods having a pH> 4.5 | Foods in relation to which simulant A only is specified in the Table to Part IV of this Schedule |
Acidic foods having a pH<= 4.5 | Foods in relation to which simulant B only is specified in the Table to Part IV of this Schedule |
Alcoholic foods | Foods in relation to which simulant C only is specified in the Table to Part IV of this Schedule |
Fatty foods | Foods in relation to which simulant D only is specified in the Table to Part IV of this Schedule |
Dry foods | Foods in relation to which no simulant is specified in the Table to Part IV of this Schedule |
4. The simulants to be used in testing a plastic material or article which is intended for contact with all food types shall be those mentioned below which, at the test conditions specified in Part V of this Schedule, are considered to be the more severe:
simulant B;
simulant C; and
simulant D.
5. The simulant or simulants to be used in testing a plastic material or article which is already in contact with a known food shall be—
(a)where the known food is a specific food or is within a specific group of foods described in column 2 of the Table to Part IV of this Schedule and, for the purposes of Part IV of this Schedule, a simulant is, or simulants are, specified in relation to that specific food or specific group of foods, the simulant or simulants so specified;
(b)where the known food is neither a specific food nor within a specific group of foods described in the Table to Part IV of this Schedule, the simulant or simulants in column 2 of Table 2 to this Part of this Schedule opposite the description of food in column 1 of that Table which corresponds most closely to the known food.
6. The simulant or simulants to be used in testing a plastic material or article which, pursuant to regulation 7 or 8, as appropriate, of the 1987 Regulations, is accompanied by a specific indication stating any type or types of food described in Table 1 with which it may or may not be used shall be the simulant or simulants in column 2 of Table 2 to this Part of this Schedule opposite the contact food in column 1 of that Table which corresponds most closely to the type or types of food with which it may be used, as identified by the indication which accompanies the plastic material or article.
7. The simulant or simulants to be used in testing a plastic material or article which, pursuant to regulation 7 or 8, as appropriate, of the 1987 Regulations, is accompanied by a specific indication, expressed in accordance with paragraph 8 of this Part of this Schedule, stating any food or group of foods described in the Table to Part IV of this Schedule with which it may or may not be used shall be—
(a)where the indication states that the plastic material or article may be used with a food or group of foods described in column 2 of the Table to Part IV, the food simulant or food simulants which, for the purposes of Part IV of this Schedule, is or are specified in relation to that food or group of foods;
(b)where the indication states that the plastic material or article should not be used with any food or group of foods described in column 2 of the Table to Part IV of this Schedule, a simulant other than the simulant or simulants which, for the purposes of Part IV of this Schedule, is or are specified in relation to that food or group of foods.
8. A specific indication referred to in paragraph 7 of this Part of this Schedule is expressed in accordance with this paragraph if it is expressed—
(a)at a marketing stage other than retail, by using the reference number in column 1 of the Table to Part IV of these Regulations or the decription of food in column 2 of that Table which, in either case, corresponds to the food;
(b)at the retail stage, by using an indication which refers to only a few foods or groups of foods described in the Table to Part IV of this Schedule.
Contact foods | Simulant |
---|---|
Only aqueous foods | Simulant A |
Only acidic foods | Simulant B |
Only alcoholic foods | Simulant C |
Only fatty foods | Simulant D |
All aqueous and acidic foods | Simulant B |
All alcoholic and aqueous foods | Simulant C |
All alcoholic and acidic foods | Simulants C and B |
All fatty and aqueous foods | Simulants D and A |
All fatty and acidic foods | Simulants D and B |
All fatty, alcoholic and aqueous foods | Simulants D and C |
All fatty, alcoholic and acidic foods | Simulants D, C and B |
1. For the purposes of this Part of this Schedule a simulant is specified in relation to a specific food or a specific group of foods where “X” is placed in the column headed by that simulant opposite that specific food or specific group of foods in the Table to this Part of this Schedule, and the Table shall be read in conjunction with the notes thereto and the following paragraphs of this Part of this Schedule.
2. For the purposes of this Part of this Schedule—
(a)a reduction factor is the figure which follows an “X” and oblique stroke in the group of columns headed “Simulants to be used” in the Table to this Part of this Schedule;
(b)a reduction factor is specified in relation to a specific food or group of foods where, in the Table to this Part of this Schedule—
(i)the food or group of foods is described in the column headed “Description of food”; and
(ii)“X” is placed in a column headed by a specified simulant opposite that food or group of foods allowed by an oblique stroke and a reduction factor.
3. Where, in the Table to this Part of this Schedule, a reduction factor is specified relation to a specific food or a specific group of foods, that reduction factor shall be applied to the result of any migration test using the simulant specified in relation to that food or group of foods by dividing the result of the test by that reduction factor.
4. Where, in the Table to this Part of this Schedule, the letter “a” is shown in brackets after the “X”, only one of the two simulants specified shall be used in the migration test, that is to say—
(a)if the pH value of the food is higher than 4.5, simulant A shall be used,
(b)if the pH value of the foodstuff is 4.5 or less, simulant B shall be used.
5. Where a food is listed in the Table to this Part of this Schedule under both a specific and a general heading, the simulant relating to the specific heading is the simulant which falls to be used for the migration test.
Simulants to be used | |||||
---|---|---|---|---|---|
Reference Number | Description of food | A | B | C | D |
NOTES: | |||||
(*) Simulant B shall not be used where the pH is more than 4.5. | |||||
(**) This test shall be carried out in the case of liquids or beverages of an alcoholic strength exceeding 10% vol. with aqueous solutions of ethanol of a similar strength. | |||||
(***) If it can be demonstrated under regulation 11 or proved by means of an appropriate test that there is to be no fatty contact with the plastic material or article, simulant D shall not be used. | |||||
01 | Beverages | ||||
01.01 | Non-alcoholic beverages or alcoholic beverages of an alcoholic strength lower than 5% vol.:
| X(a) | X(a) | ||
01.02 | Alcoholic beverages of an alcoholic strength equal to or exceeding 5% vol.:
| X(*) | X(**) | ||
01.03 | Miscellaneous: undenatured ethyl alcohol | X(*) | X(**) | ||
02 | Cereals, cereal products, pastry, biscuits, cakes and other bakers' wares | ||||
02.01 | Starches | ||||
02.02 | Cereals, unprocessed, puffed, in flakes (including popcorn, cornflakes and the like) | ||||
02.03 | Cereal flour and meal | ||||
02.04 | Macaroni, spaghetti and similar products | ||||
02.05 | Pastry, biscuits, cakes and other bakers' wares, dry: | ||||
A. With fatty substances on the surface | X/5 | ||||
B. Other | |||||
02.06 | Pastry, cakes and other bakers' wares, fresh: | ||||
A. With fatty substances on the surface | X/5 | ||||
B. Other | X | ||||
03 | Chocolate, sugar and products thereof Confectionery products | ||||
03.01 | Chocolate, chocolate-coated products, substitutes and products coated with substitutes | X/5 | |||
03.02 | Confectionery products: | ||||
A. In solid form: | |||||
I. With fatty substances on the surface | X/5 | ||||
II. Other | |||||
B. In paste form | |||||
I. With fatty substances on the surface | X/3 | ||||
II. Moist | X | ||||
03.03 | Sugar and sugar products | ||||
A. In solid form | |||||
B. Honey and the like | X | ||||
C. Molasses and sugar syrups | X | ||||
04 | Fruit, vegetables and products thereof | ||||
04.01 | Whole fruit, fresh or chilled | ||||
04.02 | Processed fruit: | ||||
A. Dried or dehydrated fruit, whole or in the form of flour or powder | |||||
B. Fruit in the form of chunks, puree or paste | X(a) | X(a) | |||
C. Fruit preserves (jams and similar products—whole fruit or chunks or in the form of flour or powder, preserved in a liquid medium): | |||||
I. In an aqueous medium | X(a) | X(a) | |||
II. In an oily medium | X(a) | X(a) | X | ||
III. In an alcoholic medium (>=5% vol.) | X(*) | X | |||
04.03 | Nuts (peanuts, chestnuts, almonds, hazelnuts, walnuts, pine kernels and others) | ||||
A. Shelled, dried | |||||
B. Shelled and roasted | X/5(***) | ||||
C. In paste or cream form | X | X/3(***) | |||
04.04 | Whole vegetables, fresh or chilled | ||||
04.05 | Processed vegetables: | ||||
A. Dried or dehydrated vegetables whole or in the form of flour or powder | |||||
B. Vegetables, cut, in the form of purées | X(a) | X(a) | |||
C. Preserved vegetables: | |||||
I. In an aqueous medium | X(a) | X(a) | |||
II. In an oily medium | X(a) | X(a) | X | ||
III. In an alcoholic medium (>=5% vol.) | X(*) | X | |||
05 | Fats and oils | ||||
05.01 | Animal and vegetable fats and oils, whether natural or treated (including cocoa butter, lard, resolidified butter) | X | |||
05.02 | Margarine, butter and other fats and oils made from water emulsions in oil | X/2 | |||
06 | Animal products and eggs | ||||
06.01 | Fish: | ||||
A. Fresh, chilled, salted, smoked | X | X/3(***) | |||
B. In the form of paste | X | X/3(***) | |||
06.02 | Crustaceans and molluscs (including oysters, mussels, snails) not naturally protected by their shells | X | |||
06.03 | Meat of all zoological species (including poultry and game): | ||||
A. Fresh, chilled, salted, smoked | X | X/4 | |||
B. In the form of paste, creams | X | X/4 | |||
06.04 | Processed meat products (ham, salami, bacon and other) | X | X/4 | ||
06.05 | Preserved and part-preserved meat and fish: | ||||
A. In an aqueous medium | X(a) | X(a) | |||
B. In an oily medium | X(a) | X(a) | X | ||
06.06 | Eggs not in shell: | ||||
A. Liquid | |||||
B. Other | X | ||||
06.07 | Egg yolks: | ||||
A. Liquid | X | ||||
B. Powdered or frozen | |||||
06.08 | Dried white of egg | ||||
07 | Milk products | ||||
07.01 | Milk: | ||||
A. Whole | X | ||||
B. Partly dried | X | ||||
C. Skimmed or partly skimmed | X | ||||
D. Dried | |||||
07.02 | Fermented milk such as yoghurt, buttermilk and such products in association with fruit and fruit products | X | |||
07.03 | Cream and sour cream | X(a) | X(a) | ||
07.04 | Cheeses: | ||||
A. Whole, with rind | |||||
B. Processed cheeses | X(a) | X(a) | |||
C. All others | X(a) | X(a) | X/3(***) | ||
07.05 | Rennet: | ||||
A. In liquid or viscous form | X(a) | X(a) | |||
B. Powdered or dried | |||||
08 | Miscellaneous products | ||||
08.01 | Vinegar | X | |||
08.02 | Fried or roasted foods: | ||||
A. Fried potatoes, fritters and the like | X/5 | ||||
B. Of animal origin | X/4 | ||||
08.03 | Preparations for soups, broths in liquid, solid or powder form (extracts, concentrates); homogenized composite food preparations, prepared dishes: | ||||
A. Powdered or dried | |||||
I. With fatty substances on the surface | X/5 | ||||
II. Other | |||||
B. Liquid or paste: | |||||
I. With fatty substances on the surface | X(a) | X(a) | X/3 | ||
II. Other | X(a) | X(a) | |||
08.04 | Yeasts and raising agents | ||||
A. In paste form | X(a) | X(a) | |||
B. Dried | |||||
08.05 | Salt | ||||
08.06 | Sauces: | ||||
A. Without fatty substances on the surface | X(a) | X(a) | |||
B. Mayonnaise, sauces derived from mayonnaise, salad creams and other oil in water emulsions | X(a) | X(a) | X/3 | ||
C. Sauce containing oil and water forming two distinct layers | X(a) | X(a) | X | ||
08.07 | Mustard (except powdered mustard under heading 08.17) | X(a) | X(a) | X/3(***) | |
08.08 | Sandwiches, toasted bread and the like containing any kind of foodstuff: | ||||
A. With fatty substances on the surface | X/5 | ||||
B. Other | |||||
08.09 | Ice-creams | X | |||
08.10 | Dried foods: | ||||
A. With fatty substances on the surface | X/5 | ||||
B. Other | |||||
08.11 | Frozen or deep-fozen foods | ||||
08.12 | Concentrated extracts of an alcoholic strength equal to or exceeding 5% vol. | X(*) | X | ||
08.13 | Cocoa: | ||||
A. Cocoa powder | X/5(***) | ||||
B. Cocoa paste | X/3(***) | ||||
08.14 | Coffee, whether or not roasted, decaffeinated or soluble, coffee substitutes, granulated or powdered | ||||
08.15 | Liquid coffee extracts | X | |||
08.16 | Aromatic herbs and other herbs:
| ||||
08.17 | Spices and seasonings in the natural state:
|
1. Subject to paragraphs 2, 4, 6 and 7 below and to paragraph 4.4 of Chapter II of the Annex to Directive 82/711, when carrying out migration tests the time and temperature used shall be the time and temperature selected from column 2 of the Table to this Part of this Schedule which correspond to the worst foreseeable conditions of contact specified in column 1 of that Table for the plastic material or article being tested and to any labelling information on maximum temperature for use.
2. Where the plastic material or article being tested is intended for a food contact application covered by a combination of two or more times and temperatures specified in column 2 of the Table to this Part of this Schedule the migration test shall be carried out by subjecting the test specimen successively to all the applicable worst foreseeable conditions appropriate to the sample, using the same portion of food simulant.
3. For the purposes of this Part of this Schedule the worst foreseeable conditions of contact are those which are recognised to be the most severe on the basis of scientific evidence.
4. When carrying out a test of the specific migration of volatile substances any test using a simulant shall be performed in a manner which recognises the loss of volatile migrants which may occur in the worst foreseeable conditions of use.
5. When carrying out a migration test of a plastic material or article which is intended for use in a microwave oven, if the appropriate time and temperature is selected from the table to this Part of this Schedule, either a conventional oven or a microwave oven may be used.
6. Where the carrying out of a migration test under contact conditions specified in the Table to this Part of this Schedule causes any physical or other change in the test specimen which does not occur under the worst forseeable conditions of use of the plastic material or article being tested the migration test shall be carried out in the worst foreseeable conditions of use in which such physical or other change does not occur.
7. Where, in actual use, the plastic material or article being tested is intended to be used for periods of less than 15 minutes at any temperature of not less than 70°C and not more than 100°C and such use is indicated by appropriate labelling or instructions no test other than for 2 hours at 70°C shall be carried out on the plastic material or article unless the plastic material or article is also intended to be used for storage at room temperature in which case no test other than for 10 days test at 40°C shall be carried out.
8. The Table to this Part of this Schedule shall be read with the notes to it.
Conditions of contact in worst foreseeable use | Test conditions |
---|---|
Contact time | Test time |
t<=5 minutes | (*) |
5 minutes<t<=0.5 hours | 0.5 hours |
0.5 hours<t<=0.5 hours | 1 hour |
1 hour<t<=2 hours | 2 hours |
2 hours<t<=4 hours | 4 hours |
4 hours<t<=24 hours | 24 hours |
t>24 hours | 10 days |
contact temperature | Test temperature |
---|---|
NOTES: | |
(1) The period of time which represents the worst foreseeable conditions of contact. | |
(2) This temperature shall be used only for simulant D. For simulant A, B or C the test may be replaced by a test at 100°C or at reflux temperature for a duration of four times the time selected in accordance with paragraph 1 of this Part of this Schedule. | |
T<=5°C | 5°C |
5°C<T<=20°C | 20°C |
20°C<T<=40°C | 40°C |
40°C<T<=70°C | 70°C |
70°C<T<=100°C | 100°C or reflux temperature |
100°C<T<=121°C | 121°C(2) |
121°C<T<=130°C | 130°C(2) |
130°C<T<=150°C | 150°C(2) |
T>150°C | 175°C(2) |
1. Subject to paragraphs 2, 4 and 5 below, all the test media specified in the Table to this Part of this Schedule shall be used in the substitute fat test for overall or specific migration under the test conditions corresponding to the test conditions for simulant D.
2. Test conditions other than those specified in the Table to this Part of this Schedule may be used in the substitute fat test if the assumptions underlying the test conditions specified in that Table and, where the plastic material or article being tested is a polymer, the existing experience of that type of polymer are taken into account.
3. For each test—
(a)a new test specimen shall be used;
(b)the rules prescribed for simulant D in Part III, IV and V of this Schedule shall be applied for each test medium;
(c)subject to paragraph 4 below, compliance with a migration limit shall be determined by selecting the highest value using all the test methods.
4. Where carrying out a migration test causes any physical or other change in the test specimen which does not occur under the worst foreseeable conditions of use of the plastic material or article the result of that test shall not be used to ascertain compliance with a migration limit.
5. Any test conditions in the Table to this Part of this Schedule which are generally recognised on the basis of scientific evidence as not being appropriate for the material or article to be tested shall not be used.
6. The Table to this Part of this Schedule shall be read with the notes to it.
Test conditions with simulant D | Test conditions with isooctane | Test conditions with ethanol 95% | Test conditions with MPPO(1) |
---|---|---|---|
NOTES: | |||
(1) MPPO = Modified polyphenylene oxide | |||
(2) The volatile test media are used up to a maximum temperature of 60°C. A precondition of using these tests is that the material or article will withstand the test conditions that would otherwise be used with simulant D. Immerse a test specimen in olive oil under the appropriate conditions. If the physical properties are changed (e.g. melting, deformation) then the material is considered unsuitable for use at that temperature. If the physical properties are not changed then proceed with the substitute tests using new specimens. | |||
10 days at 5°C | 0.5 days at 5°C | 10 days at 5°C | — |
10 days at 20°C | 1 day at 20°C | 10 days at 20°C | — |
10 days at 40°C | 2 days at 20°C | 10 days at 40°C | — |
2 hours at 70°C | 0.5 hours at 40°C | 2 hours at 60°C | — |
0.5 hours at 100°C | 0.5 hours at 60°C (2) | 2.5 hours at 60°C | 0.5 hours at 100°C |
1 hour at 100°C | 1 hour at 60°C (2) | 3 hours at 60°C (2) | 1 hour at 100°C |
2 hours at 100°C | 1.5 hours at 60°C (2) | 3.5 hours at 60°C (2) | 2 hours at 100°C |
0.5 hours at 121°C | 1.5 hours at 60°C (2) | 3.5 hours at 60°C (2) | 0.5 hours at 121°C |
1 hour at 121°C | 2 hours at 60°C (2) | 4 hours at 60°C (2) | 1 hour at 121°C |
2 hours at 121°C | 2.5 hours at 60°C (2) | 4.5 hours at 60°C (2) | 2 hours at 121°C |
0.5 hours at 130°C | 2 hours at 60°C (2) | 4 hours at 60°C (2) | 0.5 hours at 130°C |
1 hour at 130°C | 2.5 hours at 60°C (2) | 4.5 hours at 60°C (2) | 1 hour at 130°C |
2 hours at 150°C | 3 hours at 60°C (2) | 5 hours at 60°C (2) | 2 hours at 150°C |
2 hours at 175°C | 4 hours at 60°C (2) | 6 hours at 60°C (2) | 2 hours at 175°C |
1. Subject to paragraph 2 of this Part of this Schedule the conditions which must be fulfilled to allow the result of either test specified in paragraph 3 of this Part of this Schedule to be used as an alternative to the result of a migration test carried out under Part III of this Schedule are that—
(a)the result obtained in a “comparison test” shows that the values are equal to or greater than those obtained in the test with simulant D; and
(b)the migration occurring in either test specified in paragraph 3 of this Part of this Schedule does not, after application of the appropriate reduction factor, exceed the appropriate migration limit.
2. The condition in sub-paragraph (a) of paragraph 1 of this Part of this Schedule does not have to be fulfilled if it can be shown on the basis of the result of scientific experiment that the values obtained in either of the tests specified in paragraph 3 of this Part of this Schedule are equal to or greater than those obtained in any of the migration tests specified in Part III of this Schedule.
3. The migration tests referred to in paragraphs 2 and 3 of this Part of this Schedule are—
(a)a test carried out using volatile media including isooctane, ethanol 95%, other volatile solvents or a mixture of solvents at such contact conditions as would result in values equal to or greater than those obtained in a test using simulant D;
(b)other tests using media having a very strong extraction power under very severe test conditions where, on the basis of scientific evidence, it is generally recognised that the results using these tests are equal to or higher than those obtained in a test using simulant D.
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys: