- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Pwynt Penodol mewn Amser (21/03/2001)
- Gwreiddiol (a wnaed Fel)
Version Superseded: 01/09/2001
Point in time view as at 21/03/2001.
There are currently no known outstanding effects for the The Road Vehicles (Display of Registration Marks) Regulations 2001.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulation 1(2)
Title of Regulations | Number | Extent of revocation |
---|---|---|
The Road Vehicles (Registration and Licensing) Regulations 1971 | 1971/450 | Regulations 17 to 22 and Schedules 2 and 3. |
The Road Vehicles (Registration and Licensing) (Amendment) Regulations 1972 | 1972/1865 | Regulation 6. |
The Road Vehicles (Registration and Licensing) Regulations (Northern Ireland) 1973 | S.R. & O. (N.I.) 1973 No. 490 | Regulations 18 to 23 and Schedule 2 and 3. |
The Road Vehicles (Registration and Licensing) (Amendment) Regulations 1975 | 1975/1089 | The whole instrument. |
The Road Vehicles (Registration and Licensing) (Amendment) (No. 2) Regulations (Northern Ireland) 1976 | 1976/2180 | Regulation 2(6), (8) and (9). |
The Road Vehicles (Registration and Licensing) (Amendment) Regulations 1984 | 1984/814 | The whole instrument. |
Yn ddilys o 01/09/2001
Regulation 10
1. The plate must be made of retroreflecting material which, as regards its construction, colour and other qualities, complies with the requirements of—U.K.
(a)the British Standard specification for retroreflecting number plates published on 15 January 1998 under number BS AU 145d M1, or
(b)any other relevant standard or specification recognised for use in an EEA State and which, when in use, offers a performance equivalent to that offered by a plate complying with the British Standard specification,
and which, in either case, is marked with the number (or such other information as is necessary to permit identification) of that standard or specification.
Marginal Citations
M1Published by the British Standards Institution, 389 Chiswick High Road, London W4 4AL. The ISBN number is 0 580 28985 0. Copies may be obtained by post from BSI Customer Services, Sales Department, at the above address or from a BSI sales outlet.
2. Where the registration mark is displayed on the front of the vehicle, it must have black characters on a white background.U.K.
3. Where the registration mark is displayed on the back of the vehicle, it must have black characters on a yellow background.U.K.
1. The plate must be made of reflex-reflecting material which, as regards its construction, colour and other qualities, complies with the requirements of—U.K.
(a)the British Standard Specification for reflex-reflecting number plates, published on 11 September 1972 under the number BS AU 145a M2, or
(b)any other relevant standard or specification recognised for use in an EEA State and which, when in use, offers a performance equivalent to that offered by a plate complying with the British Standard specification,
and which, in either case, is marked with the number (or such other information as is necessary to permit identification) of that standard or specification.
Marginal Citations
M2Published by the British Standards Institution, 389 Chiswick High Road, London W4 4AL, being the first revision of the standard first published in 1967. The ISBN number is 0 580 07327 0. Copies may be obtained by post from BSI Customer Services, Sales Department, at the above address or from a BSI sales outlet.
2. Where the registration mark is displayed on the front of the vehicle, it must have black characters on a white background.U.K.
3. Where the registration mark is displayed on the back of the vehicle, it must have black characters on a yellow background.U.K.
A. Requirements where the vehicle carries a registration plate which is constructed so that the mark may be illuminated from behind by virtue of the translucency of its characters.U.K.
1. The registration mark must be formed of white translucent characters on a black background on the surface of that plate.U.K.
2. When the registration mark is illuminated during the hours of darkness, the characters on that plate must appear white against a black background.U.K.
B. Requirements where the vehicle carries a registration plate which is not so constructed.U.K.
Either of the following is permitted—
1. A plate made of reflex-reflecting material complying with the requirements of the British Standard Specification for reflex-reflecting number plates published on 31 October 1967 under the number BS AU 145 M3 and which displays black characters on a white background where it is fixed on the front of the vehicle and black characters on a yellow background where it is fixed on the rear of the vehicle.U.K.
Marginal Citations
M3Published by the British Standards Institution, 389 Chiswick High Road, London W4 4AL, the standard having been revised in 1972 to BS AU 145a, as to which see the immediately preceding footnote.
2. A plate displaying white, silver or light grey letters and numbers on a black surface having every character indelibly inscribed on the surface or so attached to the surface that it cannot readily be detached from it, which may either—U.K.
(a)be made of cast or pressed metal with raised characters, or
(b)consist of a plate to which separate characters are attached, or
(c)consist of a plastic plate having either reverse engraved characters or characters of a foil type, or
(d)consist of an unbroken rectangular area on the surface of the vehicle which is either flat or, if there is no flat area where the mark is required to be displayed, an area which is almost flat.
Yn ddilys o 01/09/2001
Regulation 12, 13 and 14
(1) | (2) |
---|---|
Description of mark | Permitted layouts |
1.A group consisting of two letters and two numbers followed by a group of 3 letters (for example DE51 ABC). | Diagrams 1a and 1b. |
2.A group consisting of a single letter and not more than 3 numbers followed by a group of 3 letters (for example A123 ABC). | Diagrams 2a, 2b and 2c. |
3.A group of 3 letters followed by a group consisting of not more than 3 numbers and a single letter (for example ABC 123A). | Diagrams 3a, 3b and 3c. |
4.A group of 4 numbers followed by a single letter or a group of 2 letters (for example 1234 AB, 1234 A). | Diagrams 4a and 4b. |
5.A group of not more than 3 numbers followed by a group of not more than 3 letters (for example 123 ABC, 123 AB, 12 A). | Diagrams 5a and 5b. |
6.A group of not more than 3 letters followed by a group of not more than 3 numbers (for example ABC 123, AB 123, A 12). | Diagrams 6a and 6b. |
7.A single letter or group of 2 letters followed by a group of 4 numbers (for example AB 1234, A 1234). | Diagrams 7a and 7b. |
8.A group of 3 letters followed by a group of 4 numbers (for example ABZ 1234, being a form of mark issued only in Northern Ireland). | Diagrams 8a and 8b. |
9.A group of 4 numbers followed by a group of 3 letters (for example 1234 ABZ, being a form of mark issued only in Northern Ireland). | Diagrams 9a and 9b. |
Diagram 1a
Diagram 1b
Diagram 2a
Diagram 2b
Diagram 2c
Diagram 3a
Diagram 3b
Diagram 3c
Diagram 4a
Diagram 4b
Diagram 5a
Diagram 5b
Diagram 6a
Diagram 6b
Diagram 7a
Diagram 7b
Diagram 8a
Diagram 8b
Diagram 9a
Diagram 9b
(1) Relevant dimension | Relevant character height: | ||
---|---|---|---|
(2) 89 mm. | (3) 79 mm. | (4) 64 mm. | |
1.Character width (all new registration plates from 1.9.01 except replacement of “classic” plates) | 50 mm. | 44 mm. | |
2.Character width (other registration plates) | 64 mm. | 57 mm. | 44 mm. |
3.Stroke width | 16 mm. | 14 mm. | 10 mm. |
4.Space between two characters within group: general rule | 13 mm. | 11 mm. | 10 mm. |
5.Horizontal space between groups | 38 mm. | 33 mm. | 30 mm. |
6.Vertical space between groups | 19 mm. | 19 mm. | 13 mm. |
7.Minimum margin | 13 mm. | 11 mm. | 11 mm. |
8.Pressed/embossed plates fixed before 1.9.01 and “classic” plates: space permitted between “I” or “1” and another character | 13 to 37 mm. | 11 to 33 mm. | |
9.Pressed/embossed plates fixed before 1.9.01 and “classic” plates: space permitted between characters if both “I” or “1” | 13 to 60 mm. | 11 to 54 mm. |
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.
Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys