- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (a wnaed Fel)
There are currently no known outstanding effects for the The Recreational Craft Regulations 2017, Division 2..
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Propulsion engines shall be designed, constructed and assembled so that when correctly installed and in normal use, emissions shall not exceed the limit values obtained from point 2.1, Table 1 and point 2.2, Tables 2 and 3:
Where A, B and n are constants in accordance with the table, PN is the rated engine power in kW.
Exhaust emission limits for compression ignition (CI) engines(2)
b ++ Any compression-ignition engine shall not exceed a Carbon monoxide (CO) emission limit of 5,0 g/kWh. | |||
Swept VolumeSV(L/cyl) | Rated Engine Power PN(kW) | ParticulatesPT(g/kWh) | Hydrocarbons + Nitrogen Oxides(g/kWh) |
---|---|---|---|
The values referred to in table 1 | |||
(1) | 0,3 | 4,7 | |
0,15 | 5,8 | ||
0,14 | 5,8 | ||
0,12 | 5,8 | ||
0,12 | 5,8 | ||
0,11 | 5,8 |
Exhaust emission limits for spark ignition (SI) engines
Test cycles and weighting factors to be applied:
The following requirements of ISO standard 8178-4:2007 shall be used, taking into account the values set out in the table below.
For variable speed CI engines test cycle E1 or E5 shall be applied or alternatively, above 130 kW, test cycle E3 may be applied. For variable speed SI engines test cycle E4 shall be applied.
Cycle E1, Mode number | 1 | 2 | 3 | 4 | 5 | |
---|---|---|---|---|---|---|
Speed | Rated speed | Intermediate speed | Low-idle speed | |||
Torque, % | 100 | 75 | 75 | 50 | 0 | |
Weighting factor | 0,08 | 0,11 | 0,19 | 0,32 | 0,3 | |
Speed | Rated speed | Intermediate speed | Low-idle speed | |||
Cycle E3, Mode number | 1 | 2 | 3 | 4 | ||
Speed, % | 100 | 91 | 80 | 63 | ||
Power, % | 100 | 75 | 50 | 25 | ||
Weighting factor | 0,2 | 0,5 | 0,15 | 0,15 | ||
Cycle E4, Mode number | 1 | 2 | 3 | 4 | 5 | |
Speed, % | 100 | 80 | 60 | 40 | Idle | |
Torque, % | 100 | 71,6 | 46,5 | 25,3 | 0 | |
Weighting factor | 0,06 | 0,14 | 0,15 | 0,25 | 0,4 | |
Cycle E5, Mode number | 1 | 2 | 3 | 4 | 5 | |
Speed, % | 100 | 91 | 80 | 63 | Idle | |
Power, % | 100 | 75 | 50 | 25 | 0 | |
Weighting factor | 0,08 | 0,13 | 0,17 | 0,32 | 0,3 |
[F1Notified] [F1Approved] bodies may accept tests carried out on the basis of other tests cycles as specified in a [F2harmonised] [F2designated] standard and as applicable for the engine duty cycle.
Textual Amendments
F1Word in Sch. 1 Pt. B para. 2.3 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 43(3)(b)(i) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2Word in Sch. 1 Pt. B para. 2.3 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 43(3)(b)(ii) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
The engine manufacturer shall be responsible for defining those engines from his range which are to be included in an engine family.
A parent engine shall be selected from an engine family in such a way that its emissions characteristics are representative for all engines in that engine family. The engine incorporating those features that are expected to result in the highest specific emissions (expressed in g/kWh), when measured on the applicable test cycle, should normally be selected as the parent engine of the family.
The test fuel used for exhaust emission testing shall meet the following characteristics:
Petrol Fuels | ||||
---|---|---|---|---|
Property | RF-02-99Unleaded | RF-02-03Unleaded | ||
min | max | min | max | |
Research Octane Number (RON) | 95 | — | 95 | — |
Motor Octane Number (MON) | 85 | — | 85 | — |
Density at 15 oC (kg/m3) | 748 | 762 | 740 | 754 |
Initial boiling point (°C) | 24 | 40 | 24 | 40 |
Mass fraction of sulphur (mg/kg) | — | 100 | — | 10 |
Lead content (mg/l) | — | 5 | — | 5 |
Reid vapour pressure (kPa) | 56 | 60 | — | — |
Vapour pressure (DVPE) (kPa) | — | — | 56 | 60 |
Diesel Fuels | ||||
Property | RF-06-99 | RF-06-03 | ||
min | max | min | max | |
Cetane number | 52 | 54 | 52 | 54 |
Density at 15 oC (kg/m3) | 833 | 837 | 833 | 837 |
Final boiling point (°C) | — | 370 | — | 370 |
Flash point (°C) | 55 | — | 55 | — |
Mass fraction of sulphur (mg/kg) | To be reported | 300 (50) | — | 10 |
Mass fraction of ash (%) | To be reported | 0,01 | — | 0,01 |
[F3Notified] [F3Approved] bodies may accept tests carried out on the basis of other tests fuel as specified in a [F4harmonised] [F4designated] standard.
Textual Amendments
F3Word in Sch. 1 Pt. B para. 2.5 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 43(3)(b)(i) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F4Word in Sch. 1 Pt. B para. 2.5 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 43(3)(b)(ii) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
Yr Offeryn Cyfan you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Mae Memoranda Esboniadol yn nodi datganiad byr o ddiben Offeryn Statudol ac yn rhoi gwybodaeth am ei amcan polisi a goblygiadau polisi. Maent yn ceisio gwneud yr Offeryn Statudol yn hygyrch i ddarllenwyr nad oes ganddynt gymhwyster cyfreithiol, ac maent yn cyd-fynd ag unrhyw Offeryn Statudol neu Offeryn Statudol Drafft a gyflwynwyd ger bron y Senedd o Fehefin 2004 ymlaen.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys