- Latest available (Revised)
- Original (As adopted by EU)
Commission Implementing Decision (EU) 2019/1863 of 6 November 2019 amending and correcting Implementing Decision (EU) 2019/436 as regards the withdrawal of references of harmonised standards for machinery from the Official Journal of the European Union (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This version of this Decision was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council(1), and in particular Article 10(6) thereof,
Having regard to Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC(2), and in particular Article 7(3) and Article 10 thereof,
Whereas:
(1) In accordance with Article 7 of Directive 2006/42/EC machinery manufactured in conformity with a harmonised standard, the references to which have been published in the Official Journal of the European Union, is to be presumed to comply with the essential health and safety requirements covered by such a harmonised standard.
(2) The Commission by Implementing Decision (EU) 2019/436(3) published in the Official Journal of the European Union references of harmonised standards conferring a presumption of conformity with corresponding requirements of Directive 2006/42/EC.
(3) The Commission by Implementing Decision (EU) 2019/436 withdrew references of several harmonised standards from the Official Journal of the European Union as of 19 March 2019.
(4) In order to give manufacturers more time to prepare for application of the new standards, revised standards and amendments to standards references of which were published by Implementing Decision (EU) 2019/436, it is necessary to extend the dates of withdrawal of references of several standards that were withdrawn by that Decision.
(5) The reference of harmonised standard EN 1870-13:2007+A2:2012 for woodworking machines was published in the Official Journal of the European Union on 5 June 2012. The reference of a new harmonised standard EN ISO 19085-2:2017 covering the same products was, published on 9 March 2018 in the Official Journal of the European Union by Commission Communication 2018/C 092/01., Given that superseded harmonised standard EN 1870-13:2007+A2:2012 has become obsolete. However, no date of cessation of presumption of conformity in the Official Journal of the European Union was provided for harmonised standard EN 1870-13:2007+A2:2012. Harmonised standard EN 1870-13:2007+A2:2012 should therefore be it is appropriate to withdrawn that standard from the Official Journal of European Union. In order to give manufacturers sufficient time to prepare for application of the standard EN ISO 19085-2:2017, it is necessary to defer the withdrawal of the reference of standard EN 1870-13:2007+A2:2012.
(6) Implementing Decision (EU) 2019/436 should therefore be amended accordingly.
(7) Recital 14 of Implementing Decision (EU) 2019/436 erroneously states that harmonised standard EN ISO 12100:2010 should be withdrawn. For reasons of clarity that error should be corrected, deleting the reference to harmonised standard EN ISO 12100:2010 from that recital.
(8) Implementing Decision (EU) 2019/436 withdrew references of several harmonised standards from the Official Journal of the European Union as of 19 March 2019. Given that the date of withdrawal will be extended, this Decision should enter into force on the day of its publication. It is also appropriate to provide that the amendment extending the dates of withdrawal set in Implementing Decision (EU) 2019/436 applies from 19 March 2019,
HAS ADOPTED THIS DECISION:
Annex III to Implementing Decision (EU) 2019/436 is replaced by the text in the Annex to this Decision.
Recital (14) of Implementing Decision (EU) 2019/436 is replaced by the following:
The references of Harmonised standards EN 786:1996+A2:2009, EN 61496-1:2013 and EN ISO 11200:2014 should be withdrawn from the Official Journal of the European Union as they no longer satisfy the requirements which they aim to cover and which are set out in Directive 2006/42/EC.’.
This Decision shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Article 1 shall apply from 19 March 2019.
Done at Brussels, 6 November 2019.
For the Commission
The President
Jean-Claude Juncker
No | Reference of standard | Date of withdrawal | Type |
---|---|---|---|
1. | EN 1037:1995+A1:2008 Safety of machinery — Prevention of unexpected start-up | 19 September 2020 | B |
2. | EN 474-1:2006+A4:2013 Earth-moving machinery — Safety — Part 1: General requirements Notice: This publication does not concern clause 5.8.1 Visibility — Operator’s field of view of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. | 19 September 2020 | C |
3. | EN 1853:1999+A1:2009 Agricultural machinery — Trailers with tipping body – Safety | 19 September 2020 | C |
4. | EN 1870-6:2002+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading | 19 September 2020 | C |
5. | EN ISO 4254-5:2009 Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2008) | 19 September 2020 | C |
6. | EN ISO 4254-7:2009 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) | 19 September 2020 | C |
7. | EN 14017:2005+A2:2009 Agricultural and forestry machinery — Solid fertilizer distributors – Safety | 19 September 2020 | C |
8. | EN ISO 5395-1:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013) | 19 September 2020 | C |
9. | EN ISO 5395-3:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) EN ISO 5395-3:2013/A1:2017 | 19 September 2020 | C |
10. | EN 12013:2000+A1:2008 Plastics and rubber machines — Internal mixers — Safety requirements | 19 September 2020 | C |
11. | EN 12999:2011+A1:2012 Cranes — Loader cranes | 19 September 2020 | C |
12. | EN 13001-3-1:2012+A1:2013 Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure | 19 September 2020 | C |
13. | EN 13135:2013 Cranes — Safety — Design — Requirements for equipment | 19 September 2020 | C |
14. | EN 13684:2004+A3:2009 Garden equipment — Pedestrian controlled lawn aerators and scarifiers – Safety | 19 September 2020 | C |
15. | EN 15895:2011 Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools | 19 September 2020 | C |
16. | EN 692:2005+A1:2009 Machine tools — Mechanical presses — Safety | 19 September 2021 | C |
17. | EN 693:2001+A2:2011 Machine tools — Safety — Hydraulic presse | 19 March 2021 | C |
18. | EN 13736:2003+A1:2009 Safety of machine tools — Pneumatic presses | 19 September 2021 | C |
19. | EN 848-1:2007+A2:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 1: Single spindle vertical moulding machines | 19 September 2020 | C |
20. | EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines | 19 September 2020 | C |
21. | EN 50569:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors | 12 January 2021 | C |
22. | EN 50570:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers | 12 January 2021 | C |
23. | EN 50571:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines | 12 January 2021 | C |
24. | EN 50636-2-107:2015 Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012 Modified) | 12 January 2020 | C |
25. | EN 60335-1:2012 Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335-1:2010 Modified) EN 60335-1:2012/A11:2014 | 3 May 2020 | C |
26. | EN 60745-2-1:2010 Hand-held motor-operated electric tools — Safety — Part 2-1: Particular requirements for drills and impact drills (IEC 60745-2-1:2003 Modified + A1:2008) | 19 January 2022 | C |
27. | EN 60745-2-17:2010 Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers (IEC 60745-2-17:2010 Modified) | 15 December 2021 | C |
28. | EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) | 19 October 2019 | C |
29. | EN 61029-2-4:2011 Safety of transportable motor-operated electric tools — Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993 Modified + A1:2001 Modified) | 24 June 2020 | C |
30. | EN 62841-3-6:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) | 19 October 2019 | C |
31. | EN 62841-3-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014 Modified) | 15 November 2019 | C |
32. | EN 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015 Modified) | 19 October 2019 | C |
33. | EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates — Product standard, performance characteristics | 19 September 2020 | C |
34. | EN 786:1996+A2:2009 Garden equipment — Electrically powered walk- behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety | 19 September 2020 | C |
35. | EN 1870-14:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 14: Vertical panel sawing machines | 19 September 2020 | C |
36. | EN 61496-1:2013 Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests | 19 September 2020 | C |
37. | EN ISO 11200:2014 Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions | 19 September 2020 | B |
38. | EN 1870-13:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 13: Horizontal beam panel sawing machines | 19 September 2020 | C’ |
Commission Implementing Decision (EU) 2019/436 of 18 March 2019 on the harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council (OJ L 75, 19.3.2019, p. 108).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: