- Latest available (Revised)
- Original (As adopted by EU)
Commission Implementing Decision (EU) 2020/962Show full title
Commission Implementing Decision (EU) 2020/962 of 2 July 2020 amending Implementing Decision (EU) 2019/450 as regards the publication of references of European Assessment Documents for certain construction products (Text with EEA relevance)
You are here:
- Decisions originating from the EU
- 2020 No. 962
- Whole Decision
- Previous
- Next
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
This item of legislation originated from the EU
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Changes over time for: Commission Implementing Decision (EU) 2020/962
Changes to legislation:
This version of this Decision was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Commission Implementing Decision (EU) 2020/962
of 2 July 2020
amending Implementing Decision (EU) 2019/450 as regards the publication of references of European Assessment Documents for certain construction products
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC(1), and in particular Article 22 thereof,
Whereas:
(1) In accordance with Regulation (EU) No 305/2011, Technical Assessment Bodies are to use methods and criteria provided in European Assessment Documents, the references of which have been published in the Official Journal of the European Union, for assessing performance of construction products covered by those documents in relation to their essential characteristics.
(2) In accordance with Article 19 of Regulation (EU) No 305/2011, following several requests by manufacturers for European Technical Assessments, the organisation of Technical Assessment Bodies has drawn up and adopted 19 European Assessment Documents.
(3) The European Assessment Documents drawn up and adopted by the Technical Assessment Bodies relate to the following construction products:
waterproofing kit based on polymeric membranes for in- and outdoor walls and floors of wet areas and swimming pools,
kits for external thermal insulation composite system (ETICS) with renderings on mono-layer or multi-layer wall made of timber,
thermal insulation made of loose fill mineral wool,
boards made of agglomerated natural cork for thermal and acoustic insulation,
three-dimensional nailing plates,
screws and threaded rods for use in timber constructions,
profiled aluminium nail for use in timber structures,
structural composite lumber product: Laminated Strand Lumber (LSL),
point connector – dovetail made of plywood for cross laminated timber,
composite wood-based beams and columns,
lattice girders for the increase of punching resistance in flat slabs and columns,
insulating building element for masonry walls,
vertical centrifugal storm water flow regulator,
gabion boxes mattresses and sack gabions made of hexagonal regular twisted mesh metallic pre-coated with or without additional organic coating,
flat plastic roofing sheets made of recycled plastic for self-supporting and/or fully supported discontinuous roofing and/or external cladding,
rooflight with bonded or mechanically fastened cover glass,
fixed fire-resistant roof window,
clamping system for connection of precast concrete members,
externally-bonded composite systems with inorganic matrix for strengthening of concrete and masonry structures.
(4) While the European Assessment Document relating to three-dimensional nailing plates and the European Assessment Document relating to composite wood-based beams and columns have been issued to supersede the corresponding previously used Guidelines for European technical approval, the European Assessment Documents drawn up and adopted by the organisation of Technical Assessment Bodies relating to the other 17 construction products are solely based on individual manufacturers’ requests for European Technical Assessments.
(5) The European Assessment Documents drawn up and adopted by the organisation of Technical Assessment Bodies satisfy the demands to be met in relation to the basic requirements for construction works set out in Annex I to Regulation (EU) No 305/2011. It is therefore appropriate to publish the references of those European Assessment Documents in the Official Journal of the European Union.
(6) The list of references of European Assessment Documents is published by Commission Implementing Decision (EU) 2019/450(2). For reasons of clarity, references of new European Assessment Documents should be added to that list.
(7) Implementing Decision (EU) 2019/450 should therefore be amended accordingly.
(8) In order to enable the use of the European Assessment Documents as early as possible, this Decision should enter into force on the day of its publication,
HAS ADOPTED THIS DECISION:
Article 1U.K.
The Annex to Implementing Decision (EU) 2019/450 is amended in accordance with the Annex to this Decision.
Article 2U.K.
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
Done at Brussels, 2 July 2020.
For the Commission
The President
Ursula von der Leyen
ANNEXU.K.
In the Annex to Implementing Decision (EU) 2019/450, the following rows are inserted in sequential order following the order of the reference numbers:
| 030400-00-0605 | Waterproofing kit based on polymeric membranes for in- and outdoor walls and floors of wet areas and swimming pools |
| 040465-00-0404 | ETICS with renderings on mono-layer or multi-layer wall made of timber |
| 040729-00-1201 | Thermal insulation made of loose fill mineral wool |
| 041389-00-1201 | Boards made of agglomerated natural cork for thermal and acoustic insulation |
| 130186-00-0603 | Three-dimensional nailing plates (superseding technical specification ‘ETAG 015’) |
| 130118-01-0603 | Screws and threaded rods for use in timber constructions (superseding EAD 130118-00-0603) |
| 130287-00-0603 | Profiled aluminium nail for use in timber structures |
| 130308-00-0304 | Structural composite lumber product: Laminated Strand Lumber (LSL) |
| 130336-00-0603 | Point connector – Dovetail made of plywood for cross laminated timber |
| 130367-00-0304 | Composite wood-based beams and columns (superseding technical specification ‘ETAG 011’) |
| 160055-00-0301 | Lattice girders for the increase of punching resistance in flat slabs and column |
| 170011-00-0305 | Insulating building element for masonry walls |
| 180023-00-0704 | Vertical centrifugal storm water flow regulator |
| 200050-02-0102 | Gabion boxes, mattresses and sack gabions made of hexagonal regular twisted mesh metallic pre-coated with or without additional organic coating (superseding EAD 200050-01-0102) |
| 220010-01-0402 | Flat plastic roofing sheets made of recycled plastic for self-supporting and/or fully supported discontinuous roofing and/or external cladding (superseding EAD 220010-00-0402) |
| 220062-00-0401 | Rooflight with bonded or mechanically fastened cover glass |
| 220116-00-0401 | Fixed fire-resistant roof window |
| 332001-00-0602 | Clamping system for connection of precast concrete members |
| 340275-00-0104 | Externally-bonded composite systems with inorganic matrix for strengthening of concrete and masonry structures |
(2)
Commission Implementing Decision (EU) 2019/450 of 19 March 2019 on publication of the European Assessment Documents (EADs) for construction products drafted in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council (OJ L 77, 20.3.2019, p. 78).
Options/Help
Print Options
PrintThe Whole Decision
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.