- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Water and Sewerage Undertakers (Inset Appointments) Regulations 2005.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Statutory Instruments
WATER INDUSTRY, ENGLAND & WALES
Made
9th February 2005
Laid before Parliament
10th February 2005
Coming into force
1st April 2005
The Secretary of State, in exercise of the powers conferred on her by sections 7(6) and 158(10) of the Water Industry Act 1991(1), having consulted the Director General of Water Services, hereby makes the following Regulations:
1. These Regulations may be cited as the Water and Sewerage Undertakers (Inset Appointments) Regulations 2005 and shall come into force on 1st April 2005.
2.—(1) The Water Industry Act 1991(2) is amended as follows.
(2) In section 7(5)(a)(ii) (continuity of appointments, replacement appointments etc.), “50 megalitres” is substituted for “100 megalitres”.
(3) In section 158(9)(b) (powers to lay pipes in streets), “50 megalitres” is substituted for “100 megalitres”.
Elliot Morley
Minister of State,
Department for Environment, Food and Rural Affairs
9th February 2005
(This note is not part of the Regulations)
Section 7(4)(bb) of the Water Industry Act 1991 permits the appointment of a company seeking to replace the existing water or sewerage undertaker for particular premises where the conditions prescribed in section 7(5) of the Act are satisfied. Section 7(5)(a) prescribes two threshold conditions relating to the quantity of water supplied or likely to be supplied to the premises in any twelve month period. One threshold applies if the area of the relevant undertaker is wholly or mainly in Wales and another in all other cases. For all those other cases these Regulations amend section 7(5)(a)(ii) of the Act by lowering the threshold from 100 megalitres to 50 megalitres.
As a consequence of the amendment to section 7(5)(a) of the Act, these Regulations also amend section 158(9)(b), which relates to powers to lay pipes in streets.
No regulatory impact assessment has been prepared in respect of these Regulations. A regulatory impact assessment in respect of the Water Act 2003 was prepared and placed in the library of each House of Parliament during the passage of the Water Bill. This included an assessment of the lowering of the threshold to 50 megalitres. Copies can be obtained from Water Supply and Regulation Division, Department for Environment, Food and Rural Affairs, Ashdown House, 123 Victoria Street, London SW1E 6DE or from the Department’s website at www.defra.gov.uk/environment/water/legislation.
1991 c. 56; sections 7(6) and 158(10) were inserted by section 40(2) and (6) of the Competition and Service Utilities Act 1992 (c. 43). The functions of the Secretary of State under section 7(6) and 158(10) are, so far as exercisable in relation to a water or sewerage undertaker whose area is wholly or mainly in Wales, transferred to the National Assembly for Wales by article 2 of the National Assembly for Wales (Transfer of Functions) Order 1991 (S.I. 1999/672); see the entry in Schedule 1 for the Water Industry Act 1991 as substituted by paragraph (e) of Schedule 3 to the National Assembly for Wales (Transfer of Functions) Order 2000 (S.I. 2000/253) and amended by article 4 of and Schedule 2 to the National Assembly for Wales (Transfer of Functions) Order 2004 (S.I. 2004/3044). This entry was also amended by section 100(2) of the Water Act 2003 (c. 37) but not so as to affect sections 7(6) or 158(10).
Sections 7(5) and 158(9) were amended by regulation 2 of the Water and Sewerage Undertakers (Inset Appointments) Regulations 2000 (S.I. 2000/1842).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: