- Latest available (Revised)
- Original (As adopted by EU)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
There are outstanding changes not yet made to Commission Decision of 20 November 1997 on the procedure for attesting the conformity of construction products pursuant to Article 20 (2) of Council Directive 89/106/EEC as regards floorings (Text with EEA relevance) (97/808/EC). Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
Rigid floorings products for external uses and road finishes (paving units including pavers, flags, kerbs, blocks, pavement lights; self finished decking of metal sheet; rigid floor tiles; slate; tiles; mosaics; quarry tiles; terrazzotiles; expanded metal or grid floor decking; floor gratings).
Rigid flooring products for internal uses including enclosed public transport premises in the form of components (paving units, tiles, mosaics, parquet, decking of mesh or sheet, floor gratings, rigid laminated floorings, wood based products) and in the form of load bearing systems put on the market as kits (raised access floors; cavity floors), [F1other than those specified in Annex II.
Textual Amendments
F1 Substituted by Commission Decision of 8 January 2001 amending Decisions 95/467/EC, 96/578/EC, 96/580/EC, 97/176,EC, 97/462/EC, 97/556/EC, 97/740/EC, 97/808/EC, 98/213/EC, 98/214/EC, 98/279/EC, 98/436/EC, 98/437/EC, 98/599/EC, 98/600/EC, 98/601/EC, 1999/89/EC, 1999/90/EC, 1999/91/EC, 1999/454/EC, 1999/469/EC, 1999/470/EC, 1999/471/EC, 1999/472/EC, 2000/245/EC, 2000/273/EC and 2000/447/EC on the procedure for attesting the conformity of certain construction products pursuant to Article 20 of Council Directive 89/106/EEC (notified under document number C(2000) 3695) (Text with EEA relevance) (2001/596/EC).
Resilient and textile floorings for internal uses in the form of homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminateed floorings), other than those specified in Annex II.
Resilient and textile floorings for external uses in the form of homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings).
[F2Floor screed materials for external uses.
Textual Amendments
F2 Inserted by Commission Decision of 18 June 1999 amending Decisions 96/579/EC and 97/808/EC on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards circulation fixtures and floorings respectively (notified under document number C(1999) 1484) (Text with EEA relevance) (1999/453/EC).
Floor screed materials for internal uses, other than those specified in Annex II] .]
Rigid flooring products for internal uses including enclosed public transport premises in the form of components (paving units, tiles, mosaics, parquet, decking of mesh or sheet, floor gratings, rigid laminated floorings, wood based products) and in the form of load bearing systems put on the market as kits (raised access floors; cavity floors) of reaction to fire [F1classes A1 FL (1) , A2 FL (1) , B FL (1) , C FL (1) .
Resilient and textile floorings for internal uses in the form of homogeneous and hetergeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (amminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings), of reaction to fire classes A1 FL (1) , A2 FL (1) , B FL (1) , C FL (1) .
[F2Floor screed materials for internal uses, of reaction to fire classes A1 FL (1) , A2 FL (1) , B FL (1) , C FL (1) .] ]
For the products and intended uses listed below, CEN/Cenelec are requested to specify the following systems of attestation of conformity in the relevant harmonized standards: | |||
a System 4: See Annex III, Section 2, point (ii) of Directive 89/106/EEC, third possibility. | |||
Products | Intended uses | Levels or classes | Attestation of conformity systems |
---|---|---|---|
Rigid floorings products for external uses Paving units (with flat or tactile surface) including pavers; flags; kerbs; blocks; pavement lights; self finished decking of metal sheet; rigid floor tiles; slate; tiles; mosaics; quarry tiles; terrazzotiles; expanded metal or grid floor decking; floor gratings. | For external uses and road finishes, to cover external pedestrian and vehicular circulation areas | 4a |
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic [see Article 2 (1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the Interpretative Documents]. In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.
For the products and intended uses listed below, CEN/CENELEC are requested to specify the following systems of attestation of conformity in the relevant harmonised standards:
a Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material). | |||
b System 1: See Annex III, Section 2, point (i), of Directive 89/106/EEC without audit-testing of samples. | |||
c Products/materials not covered by footnote 1. | |||
d System 3: See Annex III, Section 2, point (ii), of Directive 89/106/EEC, second possibility. | |||
e Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC ( OJ L 267, 19.10.1996, p. 23 )). | |||
f System 4: See Annex III, Section 2, point (ii), of Directive 89/106/EEC, third possibility. | |||
Products | Intended uses | Levels or classes Reaction to fire | Attestation of conformity systems |
---|---|---|---|
Rigid flooring products(A) ComponentsPaving units, tiles mosaics, parquet, decking of mesh or sheet, floor gratings, rigid laminated floorings, wood based products (B) Load bearing systems put on the market as kitsRaised access floors, cavity floors | For internal uses including enclosed public transport premises | A1 FL a — A2 FL a — B FL a — C FL a | 1 b |
A1 FL c — A2 FL c — B FL c — C FL c — D FL — E FL | 3 d | ||
(A1 FL to E FL ) e , F FL | 4 f | ||
Resilient and textile flooringsHomogenous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) | For internal uses | A1 FL a — A2 FL a — B FL a — C FL a | 1 b |
A1 FL c — A2 FL c — B FL c — C FL c — D FL — E FL | 3 d | ||
(A1 FL to E FL ) e , F FL | 4 f | ||
Resilient and textile flooringsHomogenous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) | For external uses | — | 4 f |
Floor screed materials | For internal uses | A1 FL a — A2 FL a — B FL a — C FL a | 1 b |
A1 FL c — A2 FL c — B FL c — C FL c — D FL — E FL | 3 d | ||
(A1 FL to E FL ) e , F FL | 4 f | ||
For external uses | — | 4 f |
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the Interpretative Documents). In those cases the verification of such characteristic must not be imposed on the manufacturer if he does nor wish to declare the performance of the product in that respect.]
Textual Amendments
F3 Substituted by Commission Decision of 1 March 2006 amending Decision 97/808/EC on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards floorings (notified under document number C(2006) 553) (Text with EEA relevance) (2006/190/EC).
[F1Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).]
Textual Amendments
F1 Substituted by Commission Decision of 8 January 2001 amending Decisions 95/467/EC, 96/578/EC, 96/580/EC, 97/176,EC, 97/462/EC, 97/556/EC, 97/740/EC, 97/808/EC, 98/213/EC, 98/214/EC, 98/279/EC, 98/436/EC, 98/437/EC, 98/599/EC, 98/600/EC, 98/601/EC, 1999/89/EC, 1999/90/EC, 1999/91/EC, 1999/454/EC, 1999/469/EC, 1999/470/EC, 1999/471/EC, 1999/472/EC, 2000/245/EC, 2000/273/EC and 2000/447/EC on the procedure for attesting the conformity of certain construction products pursuant to Article 20 of Council Directive 89/106/EEC (notified under document number C(2000) 3695) (Text with EEA relevance) (2001/596/EC).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: