- Latest available (Revised)
- Original (As adopted by EU)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
There are currently no known outstanding effects for the Commission Decision of 15 April 2004 authorising methods for grading pig carcases in the United Kingdom (notified under document number C(2004) 1340) (Only the English text is authentic) (2004/370/EC).
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
ŷ = 66,5 — 0,95x1 + 0,068x2
where:
=
the estimated percentage of lean meat in the carcase,
=
the thickness of back-fat (including rind) in millimetres, measured at 6 centimetres off the midline of the carcase at the last rib (measurement known as 'P2'),
or
the average thickness of back-fat (including rind) in millimetres measured at 4 and 7,5 centimetres respectively off the midline of the carcase at the last rib (measurement known as ‘½ (P1 + P3)’),
=
the weight of the cold carcase in kilograms.
The formula shall be valid for carcases weighing between 30 and 120 kilograms.
ŷ = 63,4 — 0,51x1 — 0,45x3 + 0,18x4
where
=
the estimated percentage of lean meat in the carcase,
=
the thickness of back-fat (including rind) in millimetres, measured at 6 centimetres off the midline of the carcase at the last rib (measurement known as 'P2'),
=
the thickness of back-fat (including rind) in millimetres, measured at 6 centimetres off the midline of the carcase between the third and fourth last ribs (measurement known as 'rib-fat'),
=
the thickness of muscle in millimetres, measured at the same time and in the same place as x3 (measurement known as 'rib-muscle').
The formula shall be valid for carcases weighing between 30 and 120 kilograms.
ŷ = 62,8 — 0,51x1 — 0,44x3 + 0,19x4
where
=
the estimated percentage of lean meat in the carcase,
=
the thickness of back-fat (including rind) in millimetres, measured at 6 centimetres off the midline of the carcase at the last rib (measurement known as ‘P2’),
=
the thickness of back-fat (including rind) in millimetres, measured at 6 centimetres off the midline of the carcase between the third and fourth last ribs (measurement known as ‘rib-fat’),
=
the thickness of muscle in millimetres, measured at the same time and in the same place as x3 (measurement known as ‘rib-muscle’).
The formula shall be valid for carcases weighing between 30 and 120 kilograms.
The apparatus shall be equipped with a Pie Medical Netherlands 3,5 MHz scanner.
The distance from the marking point to the centre of the ultrasonic head shall be 12 cm.
The results of the measurements shall be converted into estimated lean meat content by means of the CSB Ultra-Meater apparatus itself.
ŷ = 65,1 — 1,158x1 + 0,176x2
where:
=
the estimated percentage of lean meat in the carcase,
=
the thickness of back-fat (including rind) in millimetres, measured at 6 cm off the dorsal midline of the carcase, between the third and fourth last ribs,
=
the thickness of muscle in millimetres, measured at the same time and in the same place as x1.
The formula shall be valid for carcases weighing between 30 and 120 kilograms.
The ultrasonic data shall comprise measurements of back-fat thickness and muscle thickness.
The results of the measurements are converted into estimated lean meat content using a computer.
ŷ = 64,56076 – 0,011867x1 – 0,037750x2 – 0,013357x3 – 0,011163x4 – 0,021255x5 – 0,006461x6 – 0,016539x7 – 0,026134x8 – 0,011734x9 – 0,010533x10 – 0,021250x11 – 0,011591x12 – 0,023174x13 – 0,035567x14 – 0,012220x15 – 0,010566x16 – 0,024556x17 – 0,015644x18 – 0,012601x19 – 0,024600x20 – 0,011233x21 – 0,010434x22 – 0,022287x23 – 0,015566x24 + 0,003953x25 + 0,004604x26 + 0,004438x27 + 0,004865x28 – 0,035444x29 – 0,022043x30 – 0,035690x31 – 0,043143x32 – 0,035588x33 – 0,034093x34 – 0,037165x35 – 0,027871x36 – 0,029070x37 – 0,028929x38 – 0,028884x39 – 0,028174x40 – 0,023148x41 – 0,025299x42 – 0,035816x43 – 0,044413x44 – 0,044408x45 – 0,034309x46 – 0,029252x47 – 0,018420x48 – 0,008756x49 – 0,012405x50 – 0,016834x51 – 0,019488x52 – 0,021442x53 – 0,023237x54 – 0,022466x55 – 0,033462x56 – 0,031548x57 – 0,031020x58 – 0,030049x59 – 0,029518x60 – 0,030063x61 – 0,049797x62 – 0,050145x63 – 0,049625x64 – 0,049249x65 – 0,047528x66 – 0,045669x67 – 0,026058x68 – 0,025250x69 – 0,023297x70 – 0,022976x71 – 0,022032x72 – 0,022040x73 – 0,015719x74 – 0,028318x75 – 0,017586x76 + 0,007988x77 + 0,008649x78 + 0,009642x79 + 0,009355x80 + 0,008768x81 + 0,006580x82 + 0,005336x83 + 0,008744x84 + 0,008690x85 + 0,008155x86 + 0,008398x87 + 0,008496x88 + 0,009162x89 + 0,009559x90 + 0,009805x91 + 0,009867x92 + 0,009476x93 + 0,008720x94 + 0,008490x95 + 0,008367x96 + 0,008861x97 + 0,007226x98 + 0,007774x99 + 0,008204x100 + 0,008142x101 + 0,007890x102 + 0,007522x103 + 0,008219x104 + 0,007665x105 + 0,005622x106 + 0,008785x107 + 0,008284x108
where:
=
the estimated lean meat content of the carcase,
x1, x2… x108 are the variables measured by Autofom.
The formula shall be valid for carcases weighing between 30 and 120 kilograms.
where:
=
the thickness of the backfat (including rind) in millimetres measured at 6 centimetres off the midline of the carcase at the last rib (known as ‘ P2 ’ )
The formula shall be valid for carcases weighing between 50 and 140 kilograms.]
Textual Amendments
where:
=
the thickness of the backfat (including rind) in millimetres measured at 6 centimetres off the midline of the carcase at the last rib (known as ‘ P2 ’ )
The formula shall be valid for carcases weighing between 50 and 140 kilograms.]
where:
=
the thickness of the backfat (including rind) in millimetres measured at 6 centimetres off the midline of the carcase at the last rib (known as ‘ P2 ’ )
The formula shall be valid for carcases weighing between 50 and 140 kilograms.]
The ultrasonic data shall comprise measurements of back-fat thickness and muscle thickness.
The results of the measurements are converted into estimated lean meat content using a computer.
= b 0 + ip 1 b 1 + ip 2 b 2 + ip 3 b 3 +… ip 127 b 127 .
where:
=
Input parameters of Autofom image analysis
=
Constants from the model calibration
The 127 b -coefficients are, in order IP1-IP127 :
– 1,6866978E-002
– 2,7395384E-002
– 1,9907279E-002
– 8,5862307E-003
– 1,7233329E-002
– 1,2928455E-002
– 7,2069578E-003
0,0000000E+000
0,0000000E+000
9,9210571E-003
– 2,7280254E-002
– 1,1866679E-002
– 1,6877903E-002
– 3,3714309E-002
– 2,2873893E-002
– 1,2976709E-002
– 1,9736953E-002
0,0000000E+000
– 1,0441692E-002
– 2,6023159E-002
– 1,6019909E-002
– 1,2085976E-002
– 2,0802582E-002
– 1,2004912E-002
4,9544591E-003
2,1012272E-003
3,5626963E-003
5,4210355E-003
2,8231265E-003
0,0000000E+000
3,4462682E-003
4,9613826E-003
3,1486694E-003
0,0000000E+000
3,3405393E-003
0,0000000E+000
0,0000000E+000
1,0592665E-003
0,0000000E+000
0,0000000E+000
2,3835478E-003
0,0000000E+000
– 2,3957171E-002
– 1,6251475E-002
0,0000000E+000
– 2,1446949E-002
0,0000000E+000
– 2,4741126E-002
– 2,2376098E-002
– 1,6962735E-002
– 2,8594572E-002
– 1,9001560E-002
– 2,7471537E-002
– 3,2565221E-002
– 3,1170983E-002
– 2,9708274E-002
– 2,7283320E-002
– 2,5577871E-002
– 3,2280222E-002
– 3,1662315E-002
– 3,3039205E-002
– 3,2290529E-002
– 3,0902216E-002
– 2,9116826E-002
– 2,5646536E-002
– 2,3514079E-002
– 2,7472775E-002
– 2,6122212E-002
– 2,3694078E-002
– 2,7969513E-002
– 2,8660055E-002
– 2,8413385E-002
– 3,2624107E-002
– 3,2517981E-002
– 3,1576648E-002
– 3,1543616E-002
– 3,1162977E-002
– 3,0734278E-002
– 3,4127805E-002
– 3,4164313E-002
– 3,4327772E-002
– 3,4017213E-002
– 3,3313580E-002
– 3,3459395E-002
– 2,4075206E-002
– 2,5336761E-002
– 2,6048595E-002
– 2,6499119E-002
– 2,6947299E-002
– 2,7433341E-002
– 3,1328205E-002
– 3,1818397E-002
– 2,7329659E-002
6,0837399E-003
6,8703182E-003
7,7951970E-003
8,3265398E-003
7,6311678E-003
6,6542262E-003
5,8027613E-003
8,4376512E-003
8,3114961E-003
8,2320096E-003
8,0569442E-003
7,7763004E-003
7,6648975E-003
7,3420489E-003
7,2652618E-003
7,1755257E-003
7,1458751E-003
7,1670651E-003
6,9467919E-003
7,0396927E-003
7,2869365E-003
5,7384889E-003
7,6241307E-003
7,3343012E-003
6,9868541E-003
6,6073379E-003
6,9390922E-003
6,3295597E-003
6,0446505E-003
1,0994689E-002
9,2938738E-003
4,4189114E-003
4,3836362E-003
4,6389205E-003
The b 0 -coefficient is 6,3457577E+001
The formula shall be valid for carcases weighing between 50 and 140 kilograms.]
Textual Amendments
Textual Amendments
[ F3 ] |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: