Commission Implementing Decision of 11 December 2013 amending Decision 2006/771/EC on harmonisation of the radio spectrum for use by short-range devices and repealing Decision 2005/928/EC (notified under document C(2013) 8776) (Text with EEA relevance) (2013/752/EU)

ANNEX U.K.

“‘ANNEX

Harmonised frequency bands and technical parameters for short-range devices

a Member States must allow adjacent frequency bands within this table to be used as a single frequency band provided the specific conditions of each of these adjacent frequency bands are met.
b As defined in Article 2(3).
c Member States must allow the usage of spectrum up to the transmit power, field strength or power density given in this table. In accordance with Article 3(3), they may impose less restrictive conditions, i.e. allow the use of spectrum with higher transmit power, field strength or power density, provided that this does not reduce or compromise the appropriate coexistence between short-range devices in bands harmonised by this Decision.
d Member States may only impose these “additional parameters (channelling and/or channel access and occupation rules)”, and shall not add other parameters or spectrum access and mitigation requirements. Less restrictive conditions within the meaning of Article 3(3) mean that Member States may completely omit the “additional parameters (channelling and/or channel access and occupation rules)” in a given cell or allow higher values, provided that the appropriate sharing environment in the harmonised band is not compromised.
e Member States may only impose these “other usage restrictions” and shall not add additional usage restrictions. As less restrictive conditions may be introduced within the meaning of Article 3(3), Member States may omit one or all of these restrictions, provided that the appropriate sharing environment in the harmonised band is not compromised.
f “Duty cycle” means the ratio of time during any one-hour period when a single device is actively transmitting. Less restrictive conditions within the meaning of Article 3(3) mean that Member States may allow a higher value for “duty cycle”.
g The active medical implant device category covers the radio part of active implantable medical devices that are intended to be totally or partially introduced, surgically or medically, into the human body or that of an animal, and where applicable their peripherals.
h “Animal implantable devices” are transmitting devices which are placed inside the body of an animal for the purpose of performing diagnostic functions and/or delivery of therapeutic treatment.
i The non-specific short-range device category covers all kinds of radio devices, regardless of the application or the purpose, which fulfil the technical conditions as specified for a given frequency band. Typical uses include telemetry, telecommand, alarms, data transmissions in general and other applications.
j The assistive listening device (ALD) category covers radio communications systems that allow persons suffering from hearing disability to increase their listening capability. Typical systems include one or more radio transmitters and one or more radio receivers.
l The metering device category covers radio devices that are part of bidirectional radio communications systems which allow remote monitoring, measuring and transmission of data in smart grid infrastructures, such as electricity, gas and water.
k “Social alarm devices” are radio communications systems that allow reliable communication for a person in distress in a confined area to initiate a call for assistance. Typical uses of social alarm are to assist elderly or disabled people.
m “Active implantable medical devices” as defined in Council Directive 90/385/EEC of 20 June 1990 on the approximation of the laws of the Member States relating to active implantable medical devices (OJ L 189, 20.7.1990, p. 17).
n The high duty cycle/continuous transmission device category covers radio devices that rely on low latency and high duty cycle transmissions. Typical uses are for personal wireless audio and multimedia streaming systems, mobile phones, automotive or home entertainment system, wireless microphones, cordless loudspeakers, cordless headphones, radio devices carried on a person, assistive listening devices, in-ear monitoring, wireless microphones for use at concerts or other stage productions, and low power analogue FM transmitters (band 36).
o The radio determination device category covers radio devices that are used for determining the position, velocity and/or other characteristics of an object, or for obtaining information relating to these parameters. Typical uses are various kinds of measurement applications.
p “Tank Level Probing Radar” (TLPR) is a specific type of radiodetermination application, which is used for tank level measurements and is installed in metallic or reinforced concrete tanks, or similar structures made of material with comparable attenuation characteristics. The purpose of the tank is to contain a substance.
q “Model control devices” are a specific kind of telecommand and telemetry radio equipment that is used to remotely control the movement of models (principally miniature representations of vehicles) in the air, on land or over or under the water surface.
r The radio frequency identification (RFID) device category covers tag/interrogator based radio communications systems, consisting of radio devices (tags) attached to animate or inanimate items and of transmitter/receiver units (interrogators) which activate the tags and receive data back. Typical uses include the tracking and identification of items, such as for electronic article surveillance (EAS), and collecting and transmitting data relating to the items to which tags are attached, which may be either battery-less, battery assisted or battery powered. The responses from a tag are validated by its interrogator and passed to its host system.
s The transport and traffic telematics device category covers radio devices that are used in the fields of transport (road, rail, water or air, depending on the relevant technical restrictions), traffic management, navigation, mobility management and in intelligent transport systems (ITS). Typical applications are used for interfaces between different modes of transport, communication between vehicles (e.g. car to car), between vehicles and fixed locations (e.g. car to infrastructure) as well as communication from and to users.
t The inductive device category covers radio devices that use magnetic fields with inductive loop systems for near field communications. Typical uses include devices for car immobilisation, animal identification, alarm systems, cable detection, waste management, personal identification, wireless voice links, access control, proximity sensors, anti-theft systems, including RF anti-theft induction systems, data transfer to hand-held devices, automatic article identification, wireless control systems and automatic road tolling.
u The low duty cycle/high reliability device category covers radio devices that rely on low overall spectrum utilisation and low duty cycle spectrum access rules to ensure highly reliable spectrum access and transmissions in shared bands. Typical uses include alarm systems that use radio communication for indicating an alert condition at a distant location and social alarms systems that allow reliable communication for a person in distress.
v The wideband data transmission device category covers radio devices that use wideband modulation techniques to access the spectrum. Typical uses include wireless access systems such as radio local area networks (WAS/RLANs).
w In band 20 higher field strengths and additional usage restrictions apply for inductive applications.
x In bands 22a, 24, 25, 27a, and 28a higher field strengths and additional usage restrictions apply for inductive applications.
y The power limit applies inside a closed tank and corresponds to a spectral density of – 41,3 dBm/MHz e.i.r.p. outside a 500 litre test tank.’”
Band no	Frequency banda	Category of short-range devicesb	Transmit power limit/field strength limit/power density limitc	Additional parameters (channelling and/or channel access and occupation rules)d	Other usage restrictionse	Implementation deadline
1	9-59,750 kHz	Inductive devicest	72 dΒμΑ/m at 10 metres			1 July 2014
2	9-315 kHz	Active medical implant devicesg	30 dΒμΑ/m at 10 metres	Duty cycle limitf: 10 %	This set of usage conditions is only available to active implantable medical devicesm.	1 July 2014
3	59,750-60,250 kHz	Inductive devicest	42 dΒμΑ/m at 10 metres			1 July 2014
4	60,250-74,750 kHz	Inductive devicest	72 dBμA/m at 10 metres			1 July 2014
5	74,750-75,250 kHz	Inductive devicest	42 dBμA/m at 10 metres			1 July 2014
6	75,250-77,250 kHz	Inductive devicest	72 dBμA/m at 10 metres			1 July 2014
7	77,250-77,750 kHz	Inductive devicest	42 dBμA/m at 10 metres			1 July 2014
8	77,750-90 kHz	Inductive devicest	72 dBμA/m at 10 metres			1 July 2014
9	90-119 kHz	Inductive devicest	42 dBμA/m at 10 metres			1 July 2014
10	119-128,6 kHz	Inductive devicest	66 dBμA/m at 10 metres			1 July 2014
11	128,6-129,6 kHz	Inductive devicest	42 dBμA/m at 10 metres			1 July 2014
12	129,6-135 kHz	Inductive devicest	66 dBμA/m at 10 metres			1 July 2014
13	135-140 kHz	Inductive devicest	42 dBμA/m at 10 metres			1 July 2014
14	140-148,5 kHz	Inductive devicest	37,7 dΒμΑ/m at 10 metres			1 July 2014
15	148,5-5 000 kHzw	Inductive devicest	– 15 dΒμΑ/m at 10 metres in any bandwidth of 10 kHz. Furthermore the total field strength is – 5 dΒμΑ/m at 10 m for systems operating at bandwidths larger than 10 kHz			1 July 2014
16	315-600 kHz	Active medical implant devicesg	– 5 dΒμΑ/m at 10 m	Duty cycle limitf: 10 %	This set of usage conditions is only available to animal implantable devicesh.	1 July 2014
17	400-600 kHz	Radio Frequency Identification (RFID) devicesr	– 8 dΒμΑ/m at 10 metres			1 July 2014
18	456,9-457,1 kHz	Non-specific short-range devicesi	7 dBμA/m at 10 m		This set of usage conditions is only available for emergency detections of buried victims and valuable items devices.	1 July 2014
19	984-7 484 kHz	Transport and Traffic Telematics devicess	9 dΒμΑ/m at 10 m	Duty cycle limitf: 1 %	This set of usage conditions is only available for Eurobalise transmissions in the presence of trains and using the 27 MHz band for telepowering.	1 July 2014
20	3 155-3 400 kHz	Inductive devicest	13,5 dΒμΑ/m at 10 metres			1 July 2014
21	5 000-30 000 kHzx	Inductive devicest	– 20 dΒμΑ/m at 10 metres in any bandwidth of 10 kHz. Furthermore the total field strength is – 5 dΒμΑ/m at 10 m for systems operating at bandwidths larger than 10 kHz			1 July 2014
22a	6 765-6 795 kHz	Inductive devicest	42 dΒμΑ/m at 10 metres			1 July 2014
22b	6 765-6 795 kHz	Non-specific short-range devicesi	42 dΒμΑ/m at 10 metres			1 July 2014
23	7 300-23 000 kHz	Transport and Traffic Telematics devicess	– 7 dΒμΑ/m at 10 m	Antenna restrictions apply as specified in the harmonised standards adopted under Directive 1999/5/EC.	This set of usage conditions is only available for Euroloop transmissions in the presence of trains and using the 27 MHz band for telepowering.	1 July 2014
24	7 400-8 800 kHz	Inductive devicest	9 dΒμΑ/m at 10 metres			1 July 2014
25	10 200-11 000 kHz	Inductive devicest	9 dΒμΑ/m at 10 metres			1 July 2014
26	12 500-20 000 kHz	Active medical implant devicesg	– 7 dΒμΑ/m at 10 m in a bandwidth of 10 kHz	Duty cycle limitf: 10 %	This set of usage conditions is only available to indoor use by animal implantable devicesh.	1 July 2014
27a	13 553-13 567 kHz	Inductive devicest	42 dΒμΑ/m at 10 metres			1 July 2014
27b	13 553-13 567 kHz	Radio Frequency Identification (RFID) devicesr	60 dΒμΑ/m at 10 metres			1 July 2014
27c	13 553-13 567 kHz	Non-specific short-range devicesi	42 dΒμΑ/m at 10 metres			1 July 2014
28a	26 957-27 283 kHz	Inductive devicest	42 dΒμΑ/m at 10 metres			1 July 2014
28b	26 957-27 283 kHz	Non-specific short-range devicesi	10 mW effective radiated power (e.r.p.), which corresponds to 42 dΒμΑ/m at 10 metres			1 July 2014
29	26 990-27 000 kHz	Non-specific short-range devicesi	100 mW e.r.p.	Duty cycle limitf: 0,1 %	Model control devices may operate without duty cycle restrictionsq.	1 July 2014
30	27 040-27 050 kHz	Non-specific short-range devicesi	100 mW e.r.p.	Duty cycle limitf: 0,1 %	Model control devices may operate without duty cycle restrictionsq.	1 July 2014
31	27 090-27 100 kHz	Non-specific short-range devicesi	100 mW e.r.p.	Duty cycle limitf: 0,1 %	Model control devices may operate without duty cycle restrictionsq.	1 July 2014
32	27 140-27 150 kHz	Non-specific short-range devicesi	100 mW e.r.p.	Duty cycle limitf: 0,1 %	Model control devices may operate without duty cycle restrictionsq.	1 July 2014
33	27 190-27 200 kHz	Non-specific short-range devicesi	100 mW e.r.p.	Duty cycle limitf: 0,1 %	Model control devices may operate without duty cycle restrictionsq.	1 July 2014
34	30-37,5 MHz	Active medical implant devicesg	1 mW e.r.p.	Duty cycle limitf: 10 %	This set of usage conditions is only available to ultra-low power medical membrane implants for blood pressure measurements within the definition of active implantable medical devicesm in Directive 90/385/EEC.	1 July 2014
35	40,66-40,7 MHz	Non-specific short-range devicesi	10 mW e.r.p.		Video applications are excluded.	1 July 2014
36	87,5-108 MHz	High duty cycle/continuous transmission devicesn	50 nW e.r.p.	Channel spacing up to 200 kHz.	This set of usage conditions is only available to transmitters with analogue frequency modulation (FM).	1 July 2014
37a	169,4-169,475 MHz	Assistive Listening Devices (ALD)j	500 mW e.r.p.	Channel spacing: max 50 kHz.		1 July 2014
37b	169,4-169,475 MHz	Metering devicesl	500 mW e.r.p.	Channel spacing: max 50 kHz. Duty cycle limitf: 10,0 %.		1 July 2014
37c	169,4-169,475 MHz	Non-specific short-range devicesi	500 mW e.r.p.	Channel spacing: max 50 kHz. Duty cycle limitf: 1,0 %.		1 July 2014
38	169,4-169,4875 MHz	Non-specific short-range devicesi	10 mW e.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Duty cycle limitf: 0,1 %.		1 July 2014
39a	169,4875-169,5875 MHz	Assistive Listening Devices (ALD)j	500 mW e.r.p.	Channel spacing: max 50 kHz.		1 July 2014
39b	169,4875-169,5875 MHz	Non-specific short-range devicesi	10 mW e.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Duty cycle limitf: 0,001 %.	Between 00.00 and 06.00 local time a duty cycle limitf of 0,1 % may be used.	1 July 2014
40	169,5875-169,8125 MHz	Non-specific short-range devicesi	10 mW e.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Duty cycle limitf: 0,1 %.		1 July 2014
41	401-402 MHz	Active medical implant devicesg	25 μW e.r.p.	Channel spacing: 25 kHz. Individual transmitters may combine adjacent channels for increased bandwidth up to 100 kHz. Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cycle limitf of 0,1 % may also be used.	This set of usage conditions is only available for systems specifically designed for the purpose of providing non-voice digital communications between active implantable medical devicesm and/or body-worn devices and other devices external to the human body used for transferring non-time critical individual patient-related physiological information.	1 July 2014
42	402-405 MHz	Active medical implant devicesg	25 μW e.r.p.	Channel spacing: 25 kHz. Individual transmitters may combine adjacent channels for increased bandwidth up to 300 kHz. Other techniques to access spectrum or mitigate interference, including bandwidths greater than 300 kHz, can be used provided they result at least in an equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC to ensure compatible operation with the other users and in particular with meteorological radiosondes.	This set of usage conditions is only available to active implantable medical devicesm.	1 July 2014
43	405-406 MHz	Active medical implant devicesg	25 μW e.r.p.	Channel spacing: 25 kHz Individual transmitters may combine adjacent channels for increased bandwidth up to 100 kHz. Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cycle limitf of 0,1 % may also be used.	This set of usage conditions is only available for systems specifically designed for the purpose of providing non-voice digital communications between active implantable medical devicesm and/or body-worn devices and other devices external to the human body used for transferring non-time critical individual patient-related physiological information.	1 July 2014
44a	433,05-434,04 MHz	Non-specific short-range devicesi	1 mW e.r.p. and – 13 dBm/10 kHz power density for bandwidth modulation larger than 250 kHz	Voice applications are allowed with advanced mitigation techniques.	Audio and video applications are excluded.	1 July 2014
44b	433,05-434,04 MHz	Non-specific short-range devicesi	10 mW e.r.p.	Duty cycle limitf: 10 %	Analogue audio applications other than voice are excluded. Analogue video applications are excluded.	1 July 2014
45a	434,04-434,79 MHz	Non-specific short-range devicesi	1 mW e.r.p. and – 13 dBm/10 kHz power density for bandwidth modulation larger than 250 kHz	Voice applications are allowed with advanced mitigation techniques.	Audio and video applications are excluded.	1 July 2014
45b	434,04-434,79 MHz	Non-specific short-range devicesi	10 mW e.r.p.	Duty cycle limitf: 10 %	Analogue audio applications other than voice are excluded. Analogue video applications are excluded.	1 July 2014
45c	434,04-434,79 MHz	Non-specific short-range devicesi	10 mW e.r.p.	Duty cycle limitf: 100 % subject to channel spacing up to 25 kHz. Voice applications are allowed with advanced mitigation techniques.	Audio and video applications are excluded.	1 July 2014
46a	863-865 MHz	Non-specific short-range devicesi	25 mW e.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cycle limitf of 0,1 % may also be used.	Analogue audio applications other than voice are excluded. Analogue video applications are excluded.	1 July 2014
46b	863-865 MHz	High duty cycle/continuous transmission devicesn	10 mW e.r.p.		This set of usage conditions is only available to wireless audio and multimedia streaming devices.	1 July 2014
47	865-868 MHz	Non-specific short-range devicesi	25 mW e.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cycle limitf of 1 % may also be used.	Analogue audio applications other than voice are excluded. Analogue video applications are excluded.	1 July 2014
48	868-868,6 MHz	Non-specific short-range devicesi	25 mW e.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cycle limitf of 1 % may also be used.	Analogue video applications are excluded.	1 July 2014
49	868,6-868,7 MHz	Low duty cycle/high reliability devicesu	10 mW e.r.p.	Channel spacing: 25 kHz The whole frequency band may also be used as a single channel for high-speed data transmission. Duty cycle limitf: 1,0 %	This set of usage conditions is only available to alarm systems.	1 July 2014
50	868,7-869,2 MHz	Non-specific short-range devicesi	25 mW e.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cycle limitf of 0,1 % may also be used.	Analogue video applications are excluded.	1 July 2014
51	869,2-869,25 MHz	Low duty cycle/high reliability devicesu	10 mW e.r.p.	Channel spacing: 25 kHz. Duty cycle limitf: 0,1 %	This set of usage conditions is only available to social alarm devicesk.	1 July 2014
52	869,25-869,3 MHz	Low duty cycle/high reliability devicesu	10 mW e.r.p.	Channel spacing: 25 kHz Duty cycle limitf: 0,1 %	This set of usage conditions is only available to alarm systems.	1 July 2014
53	869,3-869,4 MHz	Low duty cycle/high reliability devicesu	10 mW e.r.p.	Channel spacing: 25 kHz Duty cycle limitf: 1,0 %	This set of usage conditions is only available to alarm systems.	1 July 2014
54a	869,4-869,65 MHz	Non-specific short-range devicesi	25 mW e.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cycle limitf of 0,1 % may also be used.	Analogue audio applications other than voice are excluded. Analogue video applications are excluded.	1 July 2014
54b	869,4-869,65 MHz	Non-specific short-range devicesi	500 mW e.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a Duty cycle limitf of 10 % may also be used.	Analogue video applications are excluded.	1 July 2014
55	869,65-869,7 MHz	Low duty cycle/high reliability devicesu	25 mW e.r.p.	Channel spacing: 25 kHz Duty cycle limitf: 10 %	This set of usage conditions is only available to alarm systems.	1 July 2014
56a	869,7-870 MHz	Non-specific short-range devicesi	5 mW e.r.p.	Voice applications allowed with advanced mitigation techniques.	Audio and video applications are excluded.	1 July 2014
56b	869,7-870 MHz	Non-specific short-range devicesi	25 mW e.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cycle limitf of 1 % may also be used.	Analogue audio applications other than voice are excluded. Analogue video applications are excluded.	1 July 2014
57a	2 400-2 483,5 MHz	Non-specific short-range devicesi	10 mW equivalent isotropic radiated power (e.i.r.p.)			1 July 2014
57b	2 400-2 483,5 MHz	Radio determination deviceso	25 mW e.i.r.p.			1 July 2014
57c	2 400-2 483,5 MHz	Wideband data transmission devicesv	100 mW e.i.r.p. and 100 mW/100 kHz e.i.r.p. density applies when frequency hopping modulation is used, 10 mW/MHz e.i.r.p. density applies when other types of modulation are used	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.		1 July 2014
58	2 446-2 454 MHz	Radio Frequency Identification (RFID) devicesr	500 mW e.i.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.		1 July 2014
59	2 483,5-2 500 MHz	Active medical implant devicesg	10 mW e.i.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Channel spacing: 1 MHz. The whole frequency band may also be used dynamically as a single channel for high-speed data transmissions. Duty cycle limitf of 10 %.	This set of usage conditions is only available to active implantable medical devicesm. Peripheral master units are for indoor use only.	1 July 2014
60	4 500-7 000 MHz	Radio determination deviceso	24 dBm e.i.r.p.y	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.	This set of usage conditions is only available to Tank Level Probing Radarp.	1 July 2014
61	5 725-5 875 MHz	Non-specific short-range devicesi	25 mW e.i.r.p.			1 July 2014
62	5 795-5 805 MHz	Transport and Traffic Telematics devicess	2 W e.i.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.	This set of usage conditions applies only to road tolling applications.	1 July 2014
63	6 000-8 500 MHz	Radio determination deviceso	7 dBm/50 MHz peak e.i.r.p. and – 33 dBm/MHz mean e.i.r.p.	Automatic power control and antenna requirements as well as equivalent techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.	This set of usage conditions is only available to Level Probing Radar. Established exclusion zones around radio astronomy sites must be obeyed.	1 July 2014
64	8 500-10 600 MHz	Radio determination deviceso	30 dBm e.i.r.p.y	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.	This set of usage conditions is only available to Tank Level Probing Radarp.	1 July 2014
65	17,1-17,3 GHz	Radio determination deviceso	26 dBm e.i.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.	This set of usage conditions is only available to ground-based systems.	1 July 2014
66	24,05-24,075 GHz	Transport and Traffic Telematics devicess	100 mW e.i.r.p.			1 July 2014
67	24,05-26,5 GHz	Radio determination deviceso	26 dBm/50 MHz peak e.i.r.p. and – 14 dBm/MHz mean e.i.r.p.	Automatic power control and antenna requirements as well as equivalent techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.	This set of usage conditions is only available to Level Probing Radar. Established exclusion zones around radio astronomy sites must be obeyed.	1 July 2014
68	24,05-27 GHz	Radio determination deviceso	43 dBm e.i.r.p.y	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.	This set of usage conditions is only available to Tank Level Probing Radarp.	1 July 2014
69a	24,075-24,15 GHz	Transport and Traffic Telematics devicess	100 mW e.i.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Dwell time limits and frequency modulation range apply as specified in harmonised standards.	This set of usage conditions is only available to ground-based vehicle radars.	1 July 2014
69b	24,075-24,15 GHz	Transport and Traffic Telematics devicess	0,1 mW e.i.r.p.			1 July 2014
70a	24,15-24,25 GHz	Non-specific short-range devicesi	100 mW e.i.r.p.			1 July 2014
70b	24,15-24,25 GHz	Transport and Traffic Telematics devicess	100 mW e.i.r.p.			1 July 2014
71	24,25-24,495 GHz	Transport and Traffic Telematics devicess	– 11 dBm e.i.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Duty cycle limitsf and frequency modulation ranges apply as specified in harmonised standards.	This set of usage conditions is only available to ground-based vehicle radars operating in the harmonised 24 GHz frequency range.	1 July 2014
72	24,25-24,5 GHz	Transport and Traffic Telematics devicess	20 dBm e.i.r.p. (forward-facing radars) 16 dBm e.i.r.p. (rear-facing radars)	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Duty cycle limitsf and frequency modulation range apply as specified in harmonised standards.	This set of usage conditions is only available to ground-based vehicle radars operating in the harmonised 24 GHz frequency range.	1 July 2014
73	24,495-24,5 GHz	Transport and Traffic Telematics devicess	– 8 dBm e.i.r.p.	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Duty cycle limitsf and frequency modulation range apply as specified in harmonised standards.	This set of usage conditions is only available to ground-based vehicle radars operating in the harmonised 24 GHz frequency range.	1 July 2014
74a	57-64 GHz	Non-specific short-range devicesi	100 mW e.i.r.p., a maximum transmit power of 10 dBm and a maximum e.i.r.p. power spectral density of 13 dBm/MHz			1 July 2014
74b	57-64 GHz	Radio determination deviceso	43 dBm e.i.r.p.y	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.	This set of usage conditions is only available to Tank Level Probing Radarp.	1 July 2014
74c	57-64 GHz	Radio determination deviceso	35 dBm/50 MHz peak e.i.r.p. and – 2 dBm/MHz mean e.i.r.p.	Automatic power control and antenna requirements as well as equivalent techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.	This set of usage conditions is only available to Level Probing Radar.	1 July 2014
75	57-66 GHz	Wideband data transmission devicesv	40 dBm e.i.r.p. and 13 dBm/MHz e.i.r.p. density	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.	Fixed outdoor installations are excluded.	1 July 2014
76	61-61,5 GHz	Non-specific short-range devicesi	100 mW e.i.r.p.			1 July 2014
77	63-64 GHz	Transport and Traffic Telematics devicess	40 dBm e.i.r.p.		This set of usage conditions is only available to vehicle-to-vehicle, vehicle-to-infrastructure and infrastructure-to-vehicle systems.	1 July 2014
78a	75-85 GHz	Radio determination deviceso	34 dBm/50 MHz peak e.i.r.p. and – 3 dBm/MHz mean e.i.r.p.	Automatic power control and antenna requirements as well as equivalent techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.	This set of usage conditions is only available to Level Probing Radar. Established exclusion zones around radio astronomy sites must be obeyed.	1 July 2014
78b	75-85 GHz	Radio determination deviceso	43 dBm e.i.r.p.y	Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used.	This set of usage conditions is only available to Tank Level Probing Radarp.	1 July 2014
79	76-77 GHz	Transport and Traffic Telematics devicess	55 dBm peak e.i.r.p. and 50 dBm mean e.i.r.p. and 23,5 dBm mean e.i.r.p. for pulse radars		This set of usage conditions is only available to ground-based vehicle and infrastructure systems.	1 July 2014
80	122-123 GHz	Non-specific short-range devicesi	100 mW e.i.r.p.			1 July 2014
81	244-246 GHz	Non-specific short-range devicesi	100 mW e.i.r.p.			1 July 2014