Commission Decision of 28 May 2014 establishing the ecological criteria for the award of the EU Ecolabel for indoor and outdoor paints and varnishes (notified under document C(2014) 3429) (Text with EEA relevance) (2014/312/EU)

Article 1

1. The product group of ‘indoor and outdoor paints and varnishes’ shall comprise indoor and outdoor decorative paints and varnishes, woodstains and related products intended for use by consumers and professional users falling under the scope of Directive 2004/42/CE of the European Parliament and of the Council(1).

2. The product group of ‘indoor and outdoor paints and varnishes’ shall comprise: floor coatings and floor paints; paint products which are tinted by distributors at the request of consumer (non-professional) or professional decorators, tinting systems, decorative paints in liquid or paste formulas which may have been pre-conditioned, tinted or prepared by the manufacturer to meet consumer's needs, including wood paints, wood and decking stains, masonry coatings and metal finishes primers and undercoats of such product systems as defined in Annex I to Directive 2004/42/CE.

3. The product group shall not comprise the following products:

(a) anti-fouling coatings;

(b) preservation products for wood impregnation;

(c) coatings for particular industrial and professional uses, including heavy-duty coatings;

(d) powder coatings;

(e) UV curable paint systems;

(f) paints primarily intended for vehicles;

(g) product which primary function is not to form a film over the substrate, e.g. oils and waxes;

(h) fillers as defined by EN ISO 4618;

(i) road-marking paints.

Article 2

For the purpose of this Decision, the following definitions shall apply:

(1)

‘Paint’ means a pigmented coating material, supplied in a liquid paste or powder form, which, when applied to a substrate, forms an opaque film having protective, decorative or specific technical properties and after application dries to a solid, adherent and protective coating;

(2)

‘Varnish’ means a clear coating material which, when applied to a substrate forms a solid transparent film having protective, decorative or specific technical properties and after application dries to a solid, adherent and protective coating;

(3)

‘Decorative paints and varnishes’ means paints and varnishes that are applied in-situ to buildings, their trim and fittings, for decorative and protective purposes;

(4)

‘Lasure’ means coatings producing a transparent or semi-transparent film for decoration and protection of wood against weathering, which enables maintenance to be carried out easily;

(5)

‘Tinting system’ means a method for preparing coloured paints by mixing a ‘base’ with coloured tints;

(6)

‘Masonry coating’ means a coating that produce a decorative and protective film for use on concrete, paintable brickwork, blockwork, rendering, calcium silicate board or fibre-reinforced cement;

(7)

‘Binding primers’ means coatings designed to stabilise loose substrate particles or impact hydrophobic properties;

(8)

‘UV curable paint system’ means the hardening of coating materials by exposure to artificial ultra-violet radiation;

(9)

‘Powder coating’ means protective or decorative coating formed by the application of a coating powder to a substrate and fusion to give a continuous film;

(10)

‘In-can preservatives’ are products used for the preservation of manufactured products during storage by the control of microbial deterioration to ensure their shelf life;

(11)

‘Dry-film preservatives’ are products used for the preservation of films or coatings by the control of microbial deterioration or algal growth in order to protect the initial properties of the surface of materials or objects;

(12)

‘Anti-skinning substances’ are additives that are added to the coating materials to prevent skinning during production or storage of the coating material;

(13)

‘Volatile organic compounds’ (VOC) means any organic compounds having an initial boiling point less than or equal to 250 °C measured at a standard pressure of 101,3 kPa as defined in Directive 2004/42/EC and which, in a capillary column, are eluting up to and including Tetradecane (C₁₄H₃₀) for non-polar systems or Diethyl adipate (C₁₀H₁₈O₄) for polar systems;

(14)

‘Semi volatile organic compounds’ (SVOCs) means any organic compound having a boiling point of greater than 250 °C and which, in a capillary column(2) are eluting with a retention range between n-Tetradecane (C₁₄H₃₀) and n-Docosane (C₂₂H₄₆) for non-polar systems and diethyl adipate (C₁₀H₁₈O₄) and methyl palmitate (C₁₇H₃₄O₂) for polar systems;

(15)

‘White and light coloured’ paints are those with a tri-stimulus (Y-value) > 70 %;

(16)

‘Gloss paints’ are those which at an angle of incidence of 60° show a reflectance of ≥ 60;

(17)

‘Mid sheen paints’ (also referred to as semi-gloss, satin, semi matt) are those which at an angle of incidence of 60° or at 85° show a reflectance of < 60 and ≥ 10;

(18)

‘Matt paints’ are those which at an angle of incidence of 85° show a reflectance of < 10;

(19)

‘Dead matt paints’ are those which at an angle of incidence of 85° show a reflectance of < 5;

(20)

‘Transparent’ and ‘semi-transparent’ means a film with a contrast ratio of < 98 % at 120μ wet film thickness;

(21)

‘Opaque’ means a film with a contrast ratio of > 98 % at 120μ wet film thickness.

Article 3

The criteria for awarding the EU Ecolabel under Regulation (EC) No 66/2010, for a product falling within the product group ‘paints and varnishes’ defined in Article 1 of this Decision as well as the related assessment and verification requirements are set out in the Annex.

Article 4

The criteria and the related assessment requirements set out in the Annex, shall be valid for four years from the date of adoption of this Decision.

Article 5

For administrative purposes, the code number assigned to the product group ‘indoor and outdoor paints and varnishes’ shall be ‘044’.

Article 6

Decisions 2009/543/EC and 2009/544/EC are repealed.

Article 7

1. Applications for the EU Ecolabel for products falling within the product group ‘paints and varnishes’ submitted within two months from the date of adoption of this Decision may be based either on the criteria set out in Decision 2009/543/EC or 2009/544/EC, or on the criteria set out in this Decision. Applications shall be evaluated in accordance with the criteria on which they are based.

2. EU Ecolabel licences awarded in accordance with the criteria set out in Decision 2009/543/EC or 2009/544/EC may be used for 12 months from the date of adoption of this Decision.

Article 8

This Decision is addressed to the Member States.

Done at Brussels, 28 May 2014.

For the Commission

Janez Potočnik

Member of the Commission