- Latest available (Revised)
- Original (As adopted by EU)
Council Directive 96/59/EC of 16 September 1996 on the disposal of polychlorinated biphenyls and polychlorinated terphenyls (PCB/PCT)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This is the original version (as it was originally adopted).
1.In order to comply with Article 3, Member States shall ensure that inventories are compiled of equipment with PCB volumes of more than 5 dm3, and shall send summaries of such inventories to the Commission at the latest three years after the adoption of this Directive. In the case of power capacitors, the threshold of 5 dm3 shall be understood as including all the separate elements of a combined set.
2.Equipment in respect of which it is reasonable to assume that the fluids contain between 0,05 % and 0,005 % by weight of PCBs may be inventoried without the data required in the third and fourth indents of paragraph 3, and may be labelled as ‘PCBs contaminated < 0,05 %’. They shall be decontaminated or disposed of in accordance with Article 9 (2).
3.The inventories shall comprise the following:
the names and addresses of the holders,
the location and description of the equipment,
the quantity of PCBs contained in the equipment,
the dates and types of treatment or replacement carried out or envisaged,
the dates of declaration.
If a Member State has already compiled a similar inventory, a new one shall not be required. Inventories shall be regularly updated.
4.In order to comply with paragraph 1, Member States shall take the necessary measures to ensure that the holders of such equipment notify the competent authorities of the quantities which they hold and of any changes in this respect.
5.Member States shall take the necessary measures to ensure that any equipment which is subject to inventory under paragraph 1 is labelled. A similar label must also be affixed to the doors of premises where such equipment is located.
6.PCB-disposal undertakings shall keep registers of the quantity, origin, nature and PCB content of used PCBs delivered to them. They shall communicate this information to the competent authorities. The registers may be consulted by the local authorities and by the public. The undertakings also issue to holders who deliver used PCBs receipts specifying the nature and the quantity thereof.
7.Member States shall ensure that the competent authorities monitor the quantities of which they are notified.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: