Search Legislation

Council Directive 98/83/ECShow full title

Council Directive 98/83/EC of 3 November 1998 on the quality of water intended for human consumption

 Help about what version

What Version

 Help about advanced features

Advanced Features

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Status:

EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.

ANNEX IU.K.PARAMETERS AND PARAMETRIC VALUES

PART AU.K.Microbiological parameters

ParameterParametric value(number/100 ml)
Escherichia coli (E. coli)0
Enterococci0

The following applies to water offered for sale in bottles or containers:

ParameterParametric value
Escherichia coli (E. coli)0/250 ml
Enterococci0/250 ml
Pseudomonas aeruginosa0/250 ml
Colony count 22 °C100/ml
Colony count 37 °C20/ml

PART BU.K.Chemical parameters

ParameterParametric valueUnitNotes
Acrylamide0,1μg/lNote 1
Antimony5,0μg/l
Arsenic10μg/l
Benzene1,0μg/l
Benzo(a)pyrene0,01μg/l
Boron1,0mg/l
Bromate10μg/lNote 2
Cadmium5,0μg/l
Chromium50μg/l
Copper2,0mg/lNote 3
Cyanide50μg/l
1,2-dichloroethane3,0μg/l
Epichlorohydrin0,1μg/lNote 1
Fluoride1,5mg/l
Lead10μg/lNotes 3 and 4
Mercury1,0μg/l
Nickel20μg/lNote 3
Nitrate50mg/lNote 5
Nitrite0,5mg/lNote 5
Pesticides0,1μg/lNotes 6 and 7
Pesticides — Total0,5μg/lNotes 6 and 8
Polycyclic aromatic hydrocarbons0,1μg/lSum of concentrations of specified compounds; Note 9
Selenium10μg/l
Tetrachloroethene and Trichloroethene10μg/lSum of concentrations of specified parameters
Trihalomethanes — Total100μg/lSum of concentrations of specified compounds; Note 10
Vinyl chloride0,5μg/lNote 1

Note 1:U.K.

The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water.U.K.

Note 2:U.K.

Where possible, without compromising disinfection, Member States should strive for a lower value.U.K.

For the water referred to in Article 6(1)(a), (b) and (d), the value must be met, at the latest, 10 calendar years after the entry into force of the Directive. The parametric value for bromate from five years after the entry into force of this Directive until 10 years after its entry into force is 25 μg/l.

Note 3:U.K.

The value applies to a sample of water intended for human consumption obtained by an adequate sampling method(1) at the tap and taken so as to be representative of a weekly average value ingested by consumers. Where appropriate the sampling and monitoring methods must be applied in a harmonised fashion to be drawn up in accordance with Article 7(4). Member States must take account of the occurrence of peak levels that may cause adverse effects on human health.U.K.

Note 4:U.K.

For water referred to in Article 6(1)(a), (b) and (d), the value must be met, at the latest, 15 calendar years after the entry into force of this Directive. The parametric value for lead from five years after the entry into force of this Directive until 15 years after its entry into force is 25 μg/l.U.K.

Member States must ensure that all appropriate measures are taken to reduce the concentration of lead in water intended for human consumption as much as possible during the period needed to achieve compliance with the parametric value.

When implementing the measures to achieve compliance with that value Member States must progressively give priority where lead concentrations in water intended for human consumption are highest.

Note 5:U.K.

Member States must ensure that the condition that [nitrate]/50 + [nitrite]/3 ≤ 1, the square brackets signifying the concentrations in mg/l for nitrate (NO3) and nitrite (NO2), is complied with and that the value of 0,10 mg/l for nitrites is complied with ex water treatment works.U.K.

Note 6:U.K.

‘Pesticides’ means:U.K.

  • organic insecticides,

  • organic herbicides,

  • organic fungicides,

  • organic nematocides,

  • organic acaricides,

  • organic algicides,

  • organic rodenticides

  • organic slimicides,

  • related products (inter alia, growth regulators)

and their relevant metabolites, degradation and reaction products.

Only those pesticides which are likely to be present in a given supply need be monitored.

Note 7:U.K.

The parametric value applies to each individual pesticide. In the case of aldrin, dieldrin, heptachlor and heptachlor epoxide the parametric value is 0,030 μg/l.U.K.

Note 8:U.K.

‘Pesticides — Total’ means the sum of all individual pesticides detected and quantified in the monitoring procedure.U.K.

Note 9:U.K.

The specified compounds are:U.K.

  • benzo(b)fluoranthene,

  • benzo(k)fluoranthene,

  • benzo(ghi)perylene,

  • indeno(1,2,3-cd)pyrene.

Note 10:U.K.

Where possible, without compromising disinfection, Member States should strive for a lower value.U.K.

The specified compounds are: chloroform, bromoform, dibromochloromethane, bromodichloromethane.

For the water referred to in Article 6(1)(a), (b) and (d), the value must be met, at the latest, 10 calendar years after the entry into force of this Directive. The parametric value for total THMs from five years after the entry into force of this Directive until 10 years after its entry into force is 150 μg/l.

Member States must ensure that all appropriate measures are taken to reduce the concentration of THMs in water intended for human consumption as much as possible during the period needed to achieve compliance with the parametric value.

When implementing the measures to achieve this value, Member States must progressively give priority to those areas where THM concentrations in water intended for human consumption are highest.

PART CU.K.Indicator parameters

ParameterParametric valueUnitNotes
Aluminium200μg/l
Ammonium0,50mg/l
Chloride250mg/lNote 1
Clostridium perfringens (including spores)0number/100 mlNote 2
ColourAcceptable to consumers and no abnormal change
Conductivity2 500μS cm-1 at 20 °CNote 1
Hydrogen ion concentration≥ 6,5 and ≤ 9,5pH unitsNotes 1 and 3
Iron200μg/l
Manganese50μg/l
OdourAcceptable to consumers and no abnormal change
Oxidisability5,0mg/l O2Note 4
Sulphate250mg/lNote 1
Sodium200mg/l
TasteAcceptable to consumers and no abnormal change
Colony count 22oNo abnormal change
Coliform bacteria0number/100 mlNote 5
Total organic carbon (TOC)No abnormal changeNote 6
TurbidityAcceptable to consumers and no abnormal changeNote 7
RADIOACTIVITY
ParameterParametric valueUnitNotes
Tritium100Bq/lNotes 8 and 10
Total indicative dose0,10mSv/yearNotes 9 and 10

Note 1:U.K.

The water should not be aggressive.U.K.

Note 2:U.K.

This parameter need not be measured unless the water originates from or is influenced by surface water. In the event of non-compliance with this parametric value, the Member State concerned must investigate the supply to ensure that there is no potential danger to human health arising from the presence of pathogenic micro-organisms, e.g. cryptosporidium. Member States must include the results of all such investigations in the reports they must submit under Article 13(2).U.K.

Note 3:U.K.

For still water put into bottles or containers, the minimum value may be reduced to 4,5 pH units.U.K.

For water put into bottles or containers which is naturally rich in or artificially enriched with carbon dioxide, the minimum value may be lower.

Note 4:U.K.

This parameter need not be measured if the parameter TOC is analysed.U.K.

Note 5:U.K.

For water put into bottles or containers the unit is number/250 ml.U.K.

Note 6:U.K.

This parameter need not be measured for supplies of less than 10 000 m3 a day.U.K.

Note 7:U.K.

In the case of surface water treatment, Member States should strive for a parametric value not exceeding 1,0 NTU (nephelometric turbidity units) in the water ex treatment works.U.K.

Note 8:U.K.

Monitoring frequencies to be set later in Annex II.U.K.

Note 9:U.K.

Excluding tritium, potassium -40, radon and radon decay products; monitoring frequencies, monitoring methods and the most relevant locations for monitoring points to be set later in Annex II.U.K.

Note 10:U.K.

1.

[F1The Commission shall adopt the measures required under Note 8 on monitoring frequencies, and Note 9 on monitoring frequencies, monitoring methods and the most relevant locations for monitoring points in Annex II. Those measures, designed to amend non-essential elements of this Directive, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 12(3).

When elaborating those measures the Commission shall take into account, inter alia, the relevant provisions under existing legislation or appropriate monitoring programmes including monitoring results as derived from them.]

2.

A Member State is not required to monitor drinking water for tritium or radioactivity to establish total indicative dose where it is satisfied that, on the basis of other monitoring carried out, [X1the levels of tritium or the calculated total indicative dose] are well below the parametric value. In that case, it shall communicate the grounds for its decision to the Commission, including the results of this other monitoring carried out.

(1)

To be added following the outcome of the study currently being carried out.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources