Search Legislation

Council Directive 2002/54/ECShow full title

Council Directive 2002/54/EC of 13 June 2002 on the marketing of beet seed

 Help about what version

What Version

 Help about advanced features

Advanced Features

More Resources

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Status:

EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.

Council Directive 2002/54/EC

of 13 June 2002

on the marketing of beet seed

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty establishing the European Community, and in particular Article 37 thereof,

Having regard to the proposal from the Commission,

Having regard to the Opinion of the European Parliament(1),

Having consulted the Economic and Social Committee,

Whereas:

(1) Council Directive 66/400/EEC of 14 June 1966 on the marketing of beet seed(2) has been frequently and substantially amended(3). For reasons of clarity and rationality the said Directive should be codified.

(2) The production of sugar beet and fodder beet (hereinafter called ‘beet’) occupies an important place in the agriculture of the Community.

(3) Satisfactory results in beet cultivation depend to a large extent on the use of appropriate seed.

(4) Greater productivity will be achieved in Community beet cultivation if for the choice of varieties permitted to be marketed the Member States apply uniform rules which are as strict as possible. A common catalogue of varieties of agricultural plant species is therefore provided for in Council Directive 2002/53/EC(4).

(5) It is desirable to establish a uniform certification scheme for the Community based on the experience gained in the application of schemes in the Member States and those of the Organisation for Economic Cooperation and Development. In the context of the consolidation of the internal market, the Community scheme should offer no possibilities for Member States to derogate unilaterally from the scheme in a way that would hinder the free movement of seeds within the Community.

(6) As a general rule, beet seed should be allowed to be marketed only if it has been officially examined and certified, in accordance with the rules for certification, as basic seed or certified seed. The choice of the technical terms ‘basic seed’ and ‘certified seed’ is based on already existing international terminology. It should be possible under specified conditions to place on the market bred seed of generations prior to basic seed and seed as grown.

(7) Community rules should not apply to seed shown to be intended for export to third countries.

(8) In order to improve the quality of Community beet seed, certain requirements must be laid down as to, amongst others, polyploidy, monogermity, segmentation, analytical purity, germination and moisture content.

(9) In order to ensure identity of the seed, Community rules on packaging, sampling, sealing and marking must be established. To this end the labels should give the particulars needed both for official verification and for the information of the farmer and should clearly show the Community nature of the certification.

(10) Rules for the marketing of chemically treated seed, seeds suitable for organic growing as well as the conservation by use, in situ, of varieties threatened with genetic erosion should be introduced.

(11) Derogations should be permitted under certain conditions, without prejudice to the provisions of Article 14 of the Treaty. Member States making use of derogations should assist each other administratively as regards inspection.

(12) In order to ensure that both the requirements as to the quality of seed and the provisions for ensuring its identity are complied with during marketing, Member States should make provision for appropriate control arrangements.

(13) Seed satisfying these requirements should, without prejudice to Article 30 of the Treaty, be subject to no marketing restrictions other than those provided for in Community rules.

(14) Subject to certain conditions, seed multiplied in another country from basic seed certified in a Member State should be certified as seed multiplied in that Member State.

(15) Provision should be made for authorising the marketing within the Community of beet seed harvested in third countries only if such seed affords the same assurances as seed officially certified within the Community and complying with Community rules.

(16) During periods in which there are difficulties in obtaining supplies of certified seed of the various categories, seeds of a category subject to less stringent requirements, as well as seeds of varieties not included in the Common Catalogue of Varieties or in the national Catalogue of Varieties, should temporarily be permitted to be marketed.

(17) In order to harmonise the technical methods of certification used in the Member States and to enable comparisons to be made between seed certified within the Community and that coming from third countries, Community comparative tests should be established in Member States to permit annual post-control of seed of the category ‘certified seed’.

(18) It is desirable to organise temporary experiments for the purpose of seeking improved alternatives to certain elements of the certification schemes adopted under this Directive.

(19) The measures necessary for the implementation of this Directive should be adopted in accordance with Council Decision 1999/468/EC of 28 June 1999 laying down the procedures for the exercise of implementing powers conferred on the Commission(5).

(20) This Directive should not affect the obligations of the Member States concerning the deadlines for transposition of the Directives set out in Annex V, part B,

HAS ADOPTED THIS DIRECTIVE:

Article 1U.K.

This Directive shall apply to the production with a view to marketing, and to the marketing of beet seed within the Community.

It shall not apply to beet seed shown to be intended for export to third countries.

Article 2U.K.

1.For the purpose of this Directive:

(a) ‘marketing’

:

shall mean the sale, holding with a view to sale, offer for sale and any disposal, supply or transfer aimed at commercial exploitation of seed to third parties, whether or not for consideration.

Trade in seed not aimed at commercial exploitation of the variety, such as the following operations, shall not be regarded as marketing:

  • the supply of seed to official testing and inspection bodies,

  • the supply of seed to providers of services for processing or packaging, provided the provider of services does not acquire title to seed thus supplied.

The supply of seed under certain conditions to providers of services for the production of certain agricultural raw materials, intended for industrial purposes, or seed propagation for that purpose, shall no be regarded as marketing, provided the provider of services does not acquire title to either the seed thus supplied or the product of the harvest. The supplier of seed shall provide the certification authority with a copy of the relevant parts of the contract made with the provider of services and this shall include the standards and conditions currently met by the seed provided.

The conditions for the application of this provision shall be determined in accordance with the procedure referred to in Article 28(2).

(b) ‘beet’

:

means sugar and fodder beet of the species Beta vulgaris L.;

(c) ‘basic seed’

:

means seed

(i)

which has been produced under the responsibility of the breeder according to well-defined practices for the maintenance of the variety;

(ii)

which is intended for the production of seed of the category ‘certified seed’;

(iii)

which, subject to the provisions of Article 5, satisfies the conditions laid down in Annex I for basic seed; and

(iv)

[F1which has been found by official examination or, in the case of the conditions laid down in Annex IB, either by official examination or examination carried out under official supervision to satisfy the conditions set out in (i), (ii) and (iii);]

(d) ‘certified seed’

:

means seed

(i)

which is of direct descent from basic seed;

(ii)

which is intended for the production of beet;

(iii)

which, subject to the provisions of point (b) of Article 5, satisfies the conditions laid down in Annex I for certified seed; and

(iv)

[F1which has been found by official examination or by examination carried out under official supervision to satisfy the conditions set out in (i), (ii) and (iii).]

(e) ‘monogerm seed’

:

means genetically monogerm seed;

(f) ‘precision seed’

:

means seed designed for use in precision drills which, as required under Annex I, part B(3)(b)(bb) and (cc), gives single seedlings;

(g) ‘official measures’

:

means measures taken

(i)

by State authorities; or

(ii)

by any legal person whether governed by public or by private law, acting under the responsibility of the State; or

(iii)

in the case of ancillary activities which are also under State control, by any natural person duly sworn for that purpose;

provided that the persons mentioned under (ii) and (iii) derive no private gain from such measures.

(h) ‘small EC packages’

:

means packages containing the following certified seeds:

(i)

monogerm or precision seed: not exceeding 100 000 clusters or grains or a net weight of 2,5 kg excluding, where appropriate, granulated pesticides, pelleting substances or other solid additives;

(ii)

seed other than monogerm or precision seed: not exceeding a net weight of 10 kg, excluding, where appropriate, granulated pesticides, pelleting substances or other solid additives.

2.The different types of varieties, including the components, eligible for certification under the provisions of this Directive, may be specified and defined in accordance with the procedure laid down in Article 28(2).

[F13. When the examinations under official supervision referred to in paragraph (1)(c)(iv) and (1)(d)(iv) is carried out, the following requirements shall be complied with:

A.

Field inspection

(a)

The inspectors shall:

(i)

have the necessary technical qualifications;

(ii)

derive no private gain in connection with the carrying out of the inspections;

(iii)

have been officially licensed by the seed certification authority of the Member State concerned and this licensing shall include either the swearing-in of inspectors or the signature by inspectors of a written statement of commitment to the rules governing official examinations;

(iv)

carry out inspections under official supervision in accordance with the rules applicable to official inspections.

(b)

The seed crop to be inspected shall be grown from seed which has undergone official post-control, the results of which have been satisfactory.

(c)

A proportion of the seed crops shall be checked by official inspectors. That proportion shall be at least 5 %.

(d)

A proportion of samples from the seed lots harvested from the seed crops shall be drawn for official post control and, where appropriate, for official laboratory seed testing in respect of varietal identity and purity.

(e)

The Member States shall lay down the rules on penalties applicable to infringements of the national provisions governing examination under official supervision, adopted pursuant to this Directive. The penalties provided for must be effective, proportionate and dissuasive. Penalties may include the withdrawal of the licence provided for in (a)(iii), from officially licensed inspectors who are found guilty of deliberately or negligently contravening the rules governing official examinations. The Member States shall ensure that any certification of the seed examined is annulled in the event of such contravention unless it can be shown that such seed still meets all relevant requirements.

B.

Seed testing

(a)

Seed testing shall be carried out by seed-testing laboratories which have been authorised for that purpose by the seed certification authority of the Member State concerned under the conditions set out in (b) to (d).

(b)

The seed-testing laboratory shall have a seed analyst-in-charge who has direct responsibility for the technical operations of the laboratory and has the necessary qualifications for technical management of a seed-testing laboratory.

Its seed analysts shall have the necessary technical qualifications obtained in training courses organised under conditions applicable to official seed analysts and confirmed by official examinations.

The laboratory shall be maintained in premises and with equipment officially considered by the seed certification authority to be satisfactory for the purpose of seed testing, within the scope of the authorisation.

It shall carry out seed testing in accordance with current international methods.

(c)

The seed-testing laboratory shall be:

(i)

an independent laboratory;

or

(ii)

a laboratory belonging to a seed company.

In the case referred to in (ii), the laboratory may carry out seed testing only on seed lots produced on behalf of the seed company to which it belongs, unless it has been otherwise agreed between that seed-company, the applicant for certification and the seed certification authority.

(d)

The seed-testing laboratory’s performance of seed testing shall be subject to appropriate supervision by the seed certification authority.

(e)

For the purposes of the supervision referred to in (d) a proportion of the seed lots entered for the official certification shall be check-tested by official seed testing. That proportion shall in principle be as evenly spread as possible over natural and legal persons entering seed for certification, and the species entered but may also be oriented to eliminate specific doubts. That proportion shall be at least 5 %.

(f)

The Member States shall lay down the rules on penalties applicable to infringements of the national provisions governing examination under official supervision, adopted pursuant to this Directive The penalties provided for must be effective, proportionate and dissuasive. Penalties may include the withdrawal of the authorisation provided for in (a), from officially authorised seed-testing laboratories who are found guilty of deliberately or negligently contravening the rules governing official examinations. The Member States shall ensure that any certification of the seed examined is annulled in the event of such contravention unless it can be shown that such seed still meets all relevant requirements.]

4.Further measures applicable to the carrying out of examinations under official supervision may be adopted in accordance with the procedure referred to in Article 28(2).

[ F2. . . . .]

Article 3U.K.

1.Member States shall provide that beet seed may not be placed on the market unless it has been officially certified as ‘basic seed’ or ‘certified seed’.

2.Member States shall ensure that the official examinations of seed are carried out in accordance with current international methods, in so far as such methods exist.

Article 4U.K.

Notwithstanding Article 3(1), Member States shall provide that

  • bred seed of generations prior to basic seed, and

  • seed as grown, marketed for processing, provided that the identity of the seed is ensured, may be placed on the market.

Article 5U.K.

Member States may, by way of derogation from the provisions of Article 3,

(a)

authorise the official certification and marketing of basic seed which does not satisfy the conditions laid down in Annex I in respect of germination; to this end all necessary measures shall be taken to ensure that the supplier guarantees a specific germination which he shall state for marketing purposes on a special label bearing his name and address and the reference number of the seed lot;

(b)

in order to make seed rapidly available, notwithstanding the fact that the official examination to check compliance with the conditions laid down in Annex I in respect of germination has not been concluded, authorise the official certification and the marketing as far as the first buyer by way of trade of seed of the categories ‘basic seed’ or ‘certified seed’. Certification shall be granted only on presentation of a provisional analytical report on the seed and provided that the name and address of the first recipient are indicated; all necessary measures shall be taken to ensure that the supplier guarantees the germination ascertained at the provisional analysis; this germination shall be stated for marketing purposes on a special label bearing the name and address of the supplier and the reference number of the lot.

These provisions shall not apply to seed imported from third countries, save as otherwise provided in Article 22 in respect of multiplication outside the Community.

Member States making use of the derogation provided for in either subparagraph (a) or (b) shall assist each other administratively as regards control.

Article 6U.K.

1.Notwithstanding Article 3(1), Member States may authorise producers in their own territory to place on the market:

(a)small quantities of seed for scientific purposes or selection work;

(b)appropriate quantities of seed for other test or trial purposes, provided it belongs to varieties for which an application for entry in the catalogue has been submitted in the Member State in question.

In the case of genetically modified material, such authorisation may be granted only if all appropriate measures have been taken to avoid adverse effects on human health and the environment. For the environmental risk assessment to be carried out in this respect, the provisions of Article 7(4) of Directive 2002/53/EC shall apply accordingly.

2.The purposes for which the authorisations referred to in paragraph 1(b) may be given, the provisions relating to the marking of packages, and the quantities and the conditions under which Member States may grant such authorisation shall be determined in accordance with the procedure referred to in Article 28(2).

3.Authorisations granted before 14 December 1998 by Member States to producers in their own territory for the purposes set out in paragraph 1 shall remain in force pending determination of the provisions referred to in paragraph 2. Thereafter, all such authorisations shall respect the provisions established in accordance with paragraph 2.

Article 7U.K.

Member States may, as regards the conditions laid down in Annex I, impose additional or more stringent requirements for the certification of seed produced in their own territory.

Article 8U.K.

The Member States shall provide that the description of the genealogical components which may be required is, if the breeder so requests, treated as confidential.

Article 9U.K.

[F11. Member States shall require that, for the checking of varieties, and for the examination of seed for certification, samples are drawn officially or under official supervision in accordance with appropriate methods. However seed sampling with a view to controls pursuant to Article 25 shall be carried out officially.]

[F31a. When the seed sampling under official supervision provided for in paragraph 1 is carried out, the following requirements shall be complied with:

(a) seed sampling shall be carried out by seed samplers who have been authorised for that purpose by the seed certification authority of the Member State concerned under the conditions set out in (b), (c), and (d);

(b) seed samplers shall have the necessary technical qualifications obtained in training courses organised under conditions applicable to official seed samplers and confirmed by official examinations.

They shall carry out seed sampling in accordance with current international methods;

(c) seed samplers shall be:

(i)

independent natural persons;

(ii)

persons employed by natural or legal persons whose activities do not involve seed production, seed growing, seed processing or seed trade;

or

(iii)

persons employed by natural or legal persons whose activities involve seed production, seed growing, seed processing or seed trade.

In the case referred to in (iii), a seed sampler may carry out seed sampling only on seed lots produced on behalf of his employer, unless it has been otherwise agreed between his employer, the applicant for certification and the seed certification authority;

(d) the performance of the seed samplers shall be subject to proper supervision by the seed certification authority. When automatic sampling is in operation appropriate procedures must be adhered to and officially supervised;

(e) for the purposes of the supervision referred to in (d) a proportion of the seed lots entered for official certification shall be check-sampled by official seed samplers. That proportion shall in principle be as evenly spread as possible over natural and legal persons entering seed for certification but may also be oriented to eliminate specific doubts. That proportion shall be at least 5 %. This check sampling does not apply to automatic sampling.

The Member States shall compare the seed samples drawn officially with those of the same seed lot drawn under official supervision;

(f) the Member States shall lay down the rules on penalties applicable to infringements of the national provisions governing examination under official supervision, adopted pursuant to this Directive. The penalties provided for must be effective, proportionate and dissuasive. Penalties may include the withdrawal of the authorisation provided for in (a), from officially authorised seed samplers who are found guilty of deliberately or negligently contravening the rules governing official examinations. The Member States shall ensure that any certification of the seed sampled is annulled in the event of such contravention unless it can be shown that such seed still meets all relevant requirements.

1b. Further measures applicable to the carrying out of seed sampling under official supervision may be adopted in accordance with the procedure laid down in Article 28(2).]

2.For the examination of seed for certification, samples shall be drawn from homogeneous lots; the maximum weight of a lot and the minimum weight of a sample are given in Annex II.

Article 10U.K.

1.Member States require that basic seed and certified seed be marketed only in sufficiently homogeneous lots and in sealed packages bearing, as prescribed in Articles 11, 12 or 13, whichever is appropriate, a sealing system and markings.

2.Member States may, for the marketing of small quantities to the final consumer, provide for derogations from the provisions of paragraph 1 in respect of packaging, sealing and marking.

Article 11U.K.

1.Member States shall require that packages of basic seed and certified seed, except where seed of the latter category takes the form of small EC packages, be sealed officially or under official supervision in such a manner that they cannot be opened without damaging the sealing system or leaving evidence of tampering on either the official label provided for in Article 12 or the package.

In order to ensure sealing, the sealing system shall comprise at least either the official label or the affixing of an official seal.

The measures provided for in the second subparagraph shall not be necessary where a non-reusable sealing system is used.

In accordance with the procedure referred to in Article 28(2), it may be established whether a particular sealing system fulfils the provisions of this paragraph.

2.Member States shall require that, except in the case of small EC packages, packages shall not be resealed on one or more occasions unless this is done officially or under official supervision. If packages are resealed, the fact of resealing, the date of resealing and the authority responsible therefore shall be stated on the label required under Article 12.

3.Member States shall require that small EC packages be sealed in such a manner that they cannot be opened without damaging the sealing system or leaving evidence of tampering on the label or package. In accordance with the procedure referred to in Article 28(2), it may be established whether a particular sealing system complies with the provisions of this paragraph. Packages shall not be resealed on one or more occasions except under official supervision.

Article 12U.K.

Member States shall require that packages of basic seed and certified seed, except where seed of the latter category takes the form of small EC packages:

(a)

be labelled on the outside with an official label which has not previously been used, which satisfies the conditions laid down in Annex III, part A, and on which the information is given in one of the official languages of the Community. The colour of the label shall be white for basic seed and blue for certified seed. When a label with a string-hole is used, its attachment shall be ensured in all cases with an official seal. If, in cases under point (a) of Article 5, the basic seed does not satisfy the conditions laid down in Annex I in respect of germination, this fact shall be stated on the label. The use of official adhesive labels shall be authorised. In accordance with the procedure referred to in Article 28(2) the indelible printing under official supervision of the prescribed information on the package according to the label's model may be authorised;

(b)

contain an official document, in the same colour as the label, giving at least the information required under Annex III, part A(I)(3), (5), (6), (11) and (12). This document shall be drawn up in such a manner that it cannot be confused with the official label referred to under (a). This document is not necessary if the information is printed indelibly on the package or if, in accordance with the provisions under (a), an adhesive label or a label of non-tear material is used.

Article 13U.K.

1.Member States shall require that small EC packages:

(a)bear on the outside, in accordance with Annex III, part B, a supplier's label, a printed notice or stamp in one of the official languages of the Community; in the case of transparent packages this label may be placed inside, provided it can be read through the package; the label shall be white in colour for basic seed and blue in colour for certified seed.

(b)bear on the outside or on the supplier's label provided for in point (a) an officially assigned serial number; should an official adhesive label be used, the label shall be white in colour for basic seed and blue in colour for certified seed; the methods of attaching the said serial number may be fixed in accordance with the procedure referred to in Article 28(2).

2.Member States may require that an official adhesive label containing all or part of the information laid down in Annex III, part B, be used for marking small EC packages packed in their territory; insofar as the information is given on such label, the marking provided for in point (a) of paragraph 1 shall not be required.

Article 14U.K.

Member States may provide that, on request, small EC packages of certified seed are sealed and marked officially or under official supervision pursuant to Article 11(1) and Article 12.

Article 15U.K.

Member States shall take all measures necessary to ensure that, in the case of small packages of seed, the identity of the seed can be checked in particular at the time when seed lots are divided up. To this end, they may require that small packages divided up in their territory be sealed officially or under official supervision.

Article 16U.K.

1.In accordance with the procedure referred to in Article 28(2), it may be provided that, in cases other than those already provided for in this Directive, packages of basic or certified seed of any kind shall bear a supplier's label (which may either be a label separate from the official label or take the form of suppliers' information printed on the package itself). The particulars to be provided on any such label shall also be established in accordance with the procedure referred to in Article 28(2).

2.The label referred to in paragraph 1 shall be drawn up in such a manner that it cannot be confused with the official label referred to in Article 12.

Article 17U.K.

In the case of seed of a variety which has been genetically modified, any label or document, official or otherwise, which is affixed to or accompanies the seed lot, under the provisions of this Directive, shall clearly indicate that the variety has been genetically modified.

Article 18U.K.

Member States shall require that any chemical treatment of basic seed or certified seed be noted either on the official label or on the supplier's label and on the package or inside it.

Article 19U.K.

For the purpose of seeking improved alternatives to certain provisions set out in this Directive, it may be decided to organise temporary experiments under specified conditions at Community level in accordance with the provisions referred to in Article 28(2).

In the framework of such experiments, Member States may be released from certain obligations laid down in this Directive. The extent of that release shall be defined with reference to the provisions to which it applies. The duration of an experiment shall not exceed seven years.

Article 20U.K.

Member States shall ensure that seed which is placed on the market under the provisions of this Directive, whether mandatory or discretionary, is not subject to any marketing restrictions as regards its characteristics, examination requirements, marking and sealing other than those laid down in this or any other Directive.

Article 21U.K.

The conditions under which bred seed of generations prior to basic seed may be placed on the market under the first indent of Article 4 shall be as follows:

(a)

it must have been officially inspected by the competent certification authority in accordance with the provisions applicable to the certification of basic seed;

(b)

it must be packed in accordance with this Directive, and

(c)

the packages must bear an official label giving at least the following particulars:

  • certification authority and Member State or their distinguishing abbreviation,

  • lot reference number,

  • month and year of sealing, or

  • month and year of the last official sampling for the purposes of certification,

  • species, indicated at least in roman characters, under its botanical name, which may be given in abridged form and without the authors' names, or under its common name, or both; indication whether sugar beet or fodder beet,

  • variety, indicated at least in roman characters,

  • the description ‘pre-basic seed’,

  • number of generations preceding seed of the category ‘certified seed’.

The label shall be white with a diagonal violet line.

Article 22U.K.

1.Member States shall provide that beet seed

  • which has been produced directly from basic seed officially certified in one or more Member States or in a third country which has been granted equivalence under Article 23(1)(b), and

  • which has been harvested in another Member State,

shall, on request and without prejudice to the provisions of Directive 2002/53/EC, be officially certified as certified seed in any Member State if that seed has undergone field inspection satisfying the conditions laid down in Annex I, part A, for the relevant category and if official examination has shown that the conditions laid down in Annex I, part B, for the same category are satisfied.

Where in such cases the seed has been produced directly from officially certified seed of generations prior to basic seed, Member States may also authorise official certification as basic seed, of the conditions laid down for that category are satisfied.

2.Beet seed which has been harvested in the Community and which is intended for certification in accordance with paragraph 1 shall:

  • be packed and labelled with an official label satisfying the conditions laid down in Annex IV(A) and (B), in accordance with Article 11(1), and

  • be accompanied by an official document satisfying the conditions laid down in Annex IV(C).

The provisions in the first subparagraph on packing and labelling may be waived if the authorities responsible for field inspection, those drawing up the documents for the certification of seeds which have not been definitively certified and those responsible for certification are the same, or if they agree on exemption.

[F13. The Member States shall also provide that beet seed harvested in a third country shall, on request, be officially certified if:

(a) it has been produced directly from basic seed officially certified in one or more Member States or in a third country which has been granted equivalence under Article 23(1)(b);

(b) it has undergone field inspection satisfying the conditions laid down in an equivalence decision made under Article 23(1)(a) for the relevant category;

(c) official examination has shown that the conditions laid down in Annex I, part B for the same category are satisfied.]

Article 23U.K.

1.The Council, acting by a qualified majority on a proposal from the Commission, shall determine whether:

(a)in the case provided for in Article 22, the field inspections in the third country satisfy the conditions laid down in Annex I, part A;

[F1(b) beet seed harvested in a third country and affording the same assurances as regards its characteristics and the arrangements for its examination, for ensuring its identity, for marking and for control is equivalent in these respects to seed harvested within the Community and complying with the provisions of this Directive.]

2.Paragraph 1 shall also apply in respect of any new Member State from the date of its accession to the date on which it is to bring into force the laws, regulations or administrative provisions necessary to comply with this Directive.

Article 24U.K.

1.In order to remove any temporary difficulties in the general supply of basic or certified seed that occur in the Community and cannot be otherwise overcome, it may be decided in accordance with the procedure referred to in Article 28(2) that Member States shall permit, for a specified period, the marketing throughout the Community in quantities necessary to resolve the supply difficulties of seed of a category subject to less stringent requirements, or of seed of a variety not included in the ‘Common Catalogue of Varieties of Agricultural Plant Species’ or in the national catalogues of varieties of the Member States.

2.For a category of seed of any given variety, the official label shall be that provided for the corresponding category; for seed of varieties not included in the abovementioned catalogues the colour of the official label shall be brown. The label shall always state that the seed in question is of a category satisfying less stringent requirements.

3.Rules for the application of paragraph 1 may be adopted in accordance with the procedure referred to in Article 28(2).

Article 25U.K.

1.Member States shall ensure that official inspections are carried out in relation to the marketing of beet seed, at least by random checks, to verify compliance with the requirements and conditions of this Directive.

2.Without prejudice to the free movement of seed within the Community, Member States shall take all necessary measures to ensure that they are supplied with the following particulars during the marketing of quantities exceeding two kilograms of seed imported from third countries:

(a)species;

(b)variety;

(c)category;

(d)country of production and official inspection authority;

(e)country of dispatch;

(f)importer;

(g)quantity of seed.

The manner in which these particulars are to be presented may be determined in accordance with the procedure referred to in Article 28(2).

[F4Article 26 U.K.

1. Community comparative tests and trials shall be carried out within the Community for the post-control of samples of beet seed placed on the market under the provisions of this Directive, whether mandatory or discretionary, and taken during sampling. The comparative tests and trials may include the following:

  • seed harvested in third countries,

  • seed suitable for organic farming,

  • seed marketed in relation to the conservation in situ and the sustainable use of plant genetic resources.

2. These comparative tests and trials shall be used to harmonise the technical methods of certification and to check satisfaction of the conditions with which the seed must comply.

3. The Commission, acting in accordance with the procedure referred to in Article 28(2), shall make the necessary arrangements for the comparative tests and trials to be carried out. The Commission shall inform the Committee referred to in Article 28(1) about the technical arrangements for holding the tests and trials and the results thereof.

4. The Community may make a financial contribution to the performance of the tests and trials foreseen in paragraphs 1 and 2.

The financial contribution shall not exceed the annual appropriations decided by the budgetary authority.

5. The tests and trials which may benefit from a Community financial contribution, and detailed rules for the provision of the financial contribution, shall be established in accordance with the procedure laid down in Article 28(2).

6. The tests and trials foreseen in paragraphs 1 and 2 may be performed only by State authorities or legal persons acting under the responsibility of the State.]

Article 27U.K.

Amendments to be made to the content of the annexes in the light of the development of scientific or technical knowledge shall be adopted according to the procedure referred to in Article 28(2).

Article 28U.K.

1.The Commission shall be assisted by the Standing Committee on Seeds and Propagating Material for Agriculture, Horticulture and Forestry set up by Article 1 of Council Decision 66/399/EEC(6).

2.Where reference is made to this paragraph, Articles 4 and 7 of Decision 1999/468/EC shall apply.

The period laid down in Article 4(3) of Decision 1999/468/EC shall be set at one month.

3.The committee shall adopt its rules of procedure.

Article 29U.K.

This Directive shall be without prejudice to the provisions of national laws justified on grounds of the protection of health and life of humans, animals or plants or the protection of industrial and commercial property.

Article 30U.K.

1.Specific conditions may be established in accordance with the procedure referred to in Article 28(2) to take account of developments in the areas of:

(a)conditions under which chemically treated seed may be marketed;

(b)conditions under which seed may be marketed in relation to the conservation in situ and the sustainable use of plant genetic resources, including seed mixtures of species which also include species listed in Article 1 of Directive 2002/53/EC, and are associated with specific natural and semi-natural habitats and are threatened by genetic erosion;

(c)conditions under which seed suitable for organic production may be marketed.

2.The specific conditions referred to in paragraph 1, point (b) shall include in particular the following points:

(a)the seed of these species shall be of a known provenance approved by the appropriate authority in each Member State for marketing the seed in defined areas;

(b)appropriate quantitative restrictions.

[F3Article 30A U.K.

In accordance with the procedure laid down in Article 28(2), a Member State may, if it so requests, be wholly or partially released from the obligation to apply the provisions of this Directive, with the exception of Article 20, in so far the growing of beets and the marketing of beet seed are of minimal economic importance in its territory.]

Article 31U.K.

Member States shall submit to the Commission the text of the main provisions of domestic law they adopt in the field covered by this Directive.

The Commission shall inform the other Member States thereof.

Article 32U.K.

No later than 1 February 2004, the Commission shall submit a detailed evaluation of the simplification of the certification procedures introduced by Article 1 of Directive 98/96/EC. This evaluation shall focus in particular on the possible effects on the quantity of the seed.

Article 33U.K.

1.Directive 66/400/EEC as amended by Directives listed in Annex V, part A, is hereby repealed without prejudice to the obligations of the Member States concerning the deadlines for transposition, of the said Directives set out in Annex V, part B.

2.References to the Directive shall be construed as references to this Directive and shall be read in accordance with the correlation table in Annex VI.

Article 34U.K.

This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Communities.

Article 35U.K.

This Directive is addressed to the Member States.

ANNEX IU.K.CONDITIONS FOR CERTIFICATION

A.CropU.K.

1.The previous cropping of the field shall not have been incompatible with the production of seeds of Beta vulgaris of the variety of the crop, and the field shall be sufficiently free from such plants which are volunteers from previous cropping.U.K.

2.The crop shall have sufficient identity and purity of variety.U.K.

3.The seed producer shall submit all the multiplications of a given variety of seed for examination by the certification authority.U.K.

4.In the case of certified seed of all categories there shall be at least one field inspection, either official or under official supervision, and in the case of basic seed at least two official field inspections, one of stecklings and one of the seed-producing plants.U.K.

5.The cultural condition of the field and the stage of development of the crops shall be such as to permit identity and varietal purity to be adequately checked.U.K.

6.The minimum distances from neighbouring pollen sources shall be:U.K.

CropMinimum distance
1.For the production of basic seed:
— from any pollen sources of the genus Beta1 000 m
2.For the production of certified seed:
(a) of sugar beet:
— from any pollen sources of the genus Beta not included below1 000 m
— the intended pollinator or one of the intended pollinators being diploid, from tetraploid sugar beet pollen sources600 m
— the intended pollinator being exclusively tetraploid, from diploid sugar beet pollen sources600 m
— from sugar beet pollen sources, the ploidy of which is unknown600 m
— the intended pollinator or one of the intended pollinators being diploid, from diploid sugar beet pollen sources300 m
— the intended pollinator being exclusively tetraploid, from tetraploid sugar beet pollen sources300 m
— between two sugar beet seed production fields in which male sterility is not used300 m
(b) of fodder beet:
— from any pollen sources of the genus Beta not included below1 000 m
— the intended pollinator or one of the pollinators being diploid, from tetraploid fodder beet pollen sources600 m
— the intended pollinator being exclusively tetraploid, from diploid fodder beet pollen sources600 m
— from fodder beet pollen sources, the ploidy of which is unknown600 m
— the intended pollinator or one of the pollinators being diploid, from diploid fodder beet pollen sources300 m
— the intended pollinator being exclusively tetraploid, from tetraploid fodder beet pollen sources300 m
— between two fodder beet seed production fields in which male sterility is not used300 m

The above distances can be disregarded if there is sufficient protection from any undesirable foreign pollinator. No isolation is necessary between seed crops using the same pollinator.

The ploidy of both seed-bearing and pollen-shedding components of seed-producing crops is to be established by reference to the common catalogue of varieties of agricultural plant species compiled under Directive 2002/53/EC, or the national catalogues of varieties established under that Directive. If this information is not included for any variety, the ploidy is to be regarded as unknown, and thus a minimum isolation distance of 600 metres is required.

B.SeedU.K.

1.The seed shall have sufficient identity and purity of variety.U.K.

2.Diseases which reduce the usefulness of the seed shall be at the lowest possible level.U.K.

3.The seed shall also satisfy the following conditions:U.K.

(a)
a

Excluding, where appropriate, granulated pesticides, pelleting substances or other solid additives.

Minimum analytical purity(% by weight)aMinimum germination(% of clusters or pure seed)Maximum moisture content(% by weight)a
(aa) sugar-beet
— monogerm seed978015
— precision seed977515
— multigerm seed of varieties with more than 85 % diploids977315
— other seed976815
(bb) fodder-beet
— multigerm seed of varieties with more than 85 % diploids, monogerm seed, precision seed977315
— other seeds976815
The percentage by weight of other seeds shall not exceed 0,3.
(b)

special conditions for monogerm seed and for precision seed:

(aa)

monogerm seed:

  • at least 90 % of the germinated clusters shall give single seedlings.

  • The percentage of clusters giving three or more seedlings shall not exceed five, calculated on the germinated clusters;

(bb)

precision seed of sugar beet:

  • At least 70 % of the germinated clusters shall give single seedlings. The percentage of clusters giving three or more seedlings shall not exceed 5 %, calculated on the germinated clusters;

(cc)

precision seed of fodder-beet:

  • In the case of varieties with a percentage of diploids exceeding 85, at least 58 % of the germinated clusters shall give single seedlings. In the case of all other seeds, at least 63 % of the germinated clusters shall give single seedlings. The percentage of clusters giving three or more seedlings shall not exceed 5 %, calculated on the germinated clusters;

(dd)

in the case of seed of the category ‘basic seed’, the percentage by weight of inert matter shall not exceed 1,0. In the case of seed of the category ‘certified seed’, the percentage by weight of inert matter shall not exceed 0,5. In the case of pelleted seed of both categories, the satisfaction of the relevant conditions shallbe examined on samples drawn, pursuant to Article 9(1), from processed seed which has undergone partial decortication (rubbing or grinding) but has not yet been pelleted, without prejudice to the official examination of the minimum analytical purity of the pelleted seed;

(c)

other special conditions:

  • Member States shall ensure that beet seed may not be introduced into areas recognised as ‘rhizomania-free zones’ under appropriate Community procedures, unless the percentage by weight of inert matter does not exceed 0,5.

ANNEX IIU.K.

Maximum weight of a seed lot: 20 metric tons

Minimum weight of a sample: 500 grammes

The maximum lot weight shall not be exceeded by more than 5 %.

ANNEX IIIU.K.MARKING

A.Official labelU.K.

I.Information requiredU.K.

1.‘EC rules and standards’.U.K.
2.Certification authority and Member State or their initials.U.K.
[F52a. Officially assigned serial number.] U.K.
3.Reference number of lot.U.K.
4.Month and year of sealing expressed thus: ‘sealed … (month and year)’ orU.K.

month and year of the last official sampling for the purposes of certification expressed thus: ‘sampled … (month and year)’.

5.Species, indicated at least in roman characters, under its botanical name, which may be given in abridged form and without the authors' names, or under its common name, or both; indication whether sugar beet or fodder beet.U.K.
6.Variety indicated at least in roman characters.U.K.
7.Category.U.K.
8.Country of production.U.K.
9.Declared net or gross weight or declared number of clusters or pure seeds.U.K.
10.Where weight is indicated and granulated pesticides, pelleting substances or other solid additives are used, the nature of the additive and also the approximate ratio between the weight of clusters or pure seeds and the total weight.U.K.
11.For monogerm seed: the word ‘monogerm’.U.K.
12.For precision seed: the word ‘precision’.U.K.
13.Where at least germination has been retested, the words ‘retested … (month and year)’ and the service responsible for such retesting may be indicated. Such information may be given on an official sticker attached to the official label.U.K.

II.Minimum dimensionsU.K.

110 × 67 mm.

B.Supplier's label or information on the packing (small EC package)U.K.

Information requiredU.K.

1.‘Small EC package’.U.K.
2.Name and address of the supplier responsible for marking or his identification mark.U.K.
3.Officially assigned serial number.U.K.
4.Service which assigned the serial number and name of Member State or their initials.U.K.
5.Reference number if the official serial number does not enable the lot to be identified.U.K.
6.Species, indicated at least in roman characters; indication whether sugar beet or fodder beet.U.K.
7.Variety indicated at least in roman characters.U.K.
8.‘Category’.U.K.
9.Net or gross weight or number of clusters or pure seeds.U.K.
10.Where weight is indicated and granulated pesticides, pelleting substances or other solid additives are used, the nature of the additive and also the approximate ratio between the weight of clusters or pure seeds and the total weight.U.K.
11.For monogerm seed: the word ‘monogerm’.U.K.
12.For precision seed: the word ‘precision’.U.K.

ANNEX IVU.K.LABEL AND DOCUMENT PROVIDED IN THE CASE OF SEED NOT FINALLY CERTIFIED, HARVESTED IN ANOTHER MEMBER STATE

A.Information required for the labelU.K.

  • authority responsible for field inspection and Member State or their initials,

  • [F5officially assigned serial number,]

  • species, indicated at least in roman characters, under its botanical name, which may be given in abridged form and without the authors' names, or under its common name, or both; indication whether sugar beet or fodder beet,

  • variety, indicated at least in roman characters,

  • category,

  • field or lot reference number,

  • declared net or gross weight,

  • the words ‘seed not finally certified’.

B.Colour of the labelU.K.

The label shall be grey.

C.Information required for the documentU.K.

  • authority issuing the document,

  • [F5officially assigned serial number,]

  • species, indicated at least in roman characters, under its botanical name, which may be given in abridged form and without the authors' names, or under its common name, or both; indication whether sugar beet or fodder beet,

  • variety, indicated at least in roman characters,

  • category,

  • reference number of the seed used to sow the field and name of the country or countries which certified that seed,

  • field or lot reference number,

  • area cultivated for the production of the lot covered by the document,

  • quantity of seed harvested and number of packages,

  • attestation that the conditions to be satisfied by the crop from which the seed comes have been fulfilled,

  • where appropriate, results of a preliminary seed analysis.

ANNEX VU.K.

PART AU.K.REPEALED DIRECTIVE AND ITS SUCCESSIVE AMENDMENTS(referred to by Article 33)

Directive 66/400/EEC (OJ 125, 11.7.1966, p. 2290/66)
Council Directive 69/61/EEC (OJ L 48, 26.2.1969, p. 4)
Council Directive 71/162/EEC (OJ L 87, 17.4.1971, p. 24)only Article 1
Council Directive 72/274/EEC (OJ L 171, 29.7.1972, p. 37)only concerning references made to the provisions of Directive 66/400/EEC in Articles 1 and 2
Council Directive 72/418/EEC (OJ L 287, 26.12.1972, p. 22)only Article 1
Council Directive 73/438/EEC (OJ L 356, 27.12.1973, p. 79)only Article 1
Council Directive 75/444/EEC (OJ L 196, 26.7.1975, p. 6)only Article 1
Commission Directive 76/331/EEC (OJ L 83, 30.3.1976, p. 34)
Council Directive 78/55/EEC (OJ L 16, 20.1.1978, p. 23)only Article 1
Council Directive 78/692/EEC (OJ L 236, 26.8.1978, p. 13)only Article 1
Commission Directive 87/120/EEC (OJ L 49, 18.2.1987, p. 39)only Article 1
Commission Directive 88/95/EEC (OJ L 56, 2.3.1988, p. 42)
Council Directive 88/332/EEC (OJ L 151, 17.6.1988, p. 82)only Article 1
Council Directive 88/380/EEC (OJ L 187, 16.7.1988, p. 31)only Article 1
Council Directive 90/654/EEC (OJ L 353, 17.12.1990, p. 48)only concerning references made to the provisions of Directive 66/400/EEC in Article 2 and to Annex II(I)(1)(a)
Council Directive 96/72/EC (OJ L 304, 27.11.1996, p. 10)only Article 1(1)
Council Directive 98/95/EC (OJ L 25, 1.2.1999, p. 1)only Article 1 and to Article 9(2)
Council Directive 98/96/EC (OJ L 25, 1.2.1999, p. 27)only Article 1, Article 8(2) and to Article 9

PART BU.K.DEADLINES FOR TRANSPOSITION INTO NATIONAL LAW(referred to by Article 33)

a

For Denmark, Ireland and the United Kingdom, 1 July 1973 for Article 14(1), 1 July 1974 for the other provisions concerning basic seed and 1 July 1976 for the other provisions.

b

1 January 1986 for Greece, 1 March 1986 for Spain, 1 January 1991 for Portugal, and 1 January 1995 for Austria, Finland and Sweden.

c

The remaining stocks of labels bearing the abbreviation ‘EEC’ may continue to be used until 31 December 2001.

DirectiveDeadline for transposition
Directive 66/400/EEC1 July 1968 (Article 14(1))
1 July 1969 (other provisions)a b
Directive 69/61/EEC1 July 1969c
Directive71/162/EEC1 July 1970 (Article 1(3))
1 July 1972 (Article 1(1))
1 July 1971 (other provisions)a
Directive 72/274/EEC1 July 1972 (Article 1)
1 January 1973 (Article 2)
Directive 72/418/EEC1 July 1973
Directive 73/438/EEC1 July 1973 (Article 1(1))
1 January 1974 (Article 1(2))
Directive 75/444/EEC1 July 1977
Directive 76/331/EEC1 July 1978 (Article 1)
1 July 1979 (other provisions)
Directive 78/55/EEC1 July 1979
Directive 78/692/EEC1 July 1977 (Article 1)
1 July 1979 (other provisions)
Directive 87/120/EEC1 July 1988
Directive 88/95/EEC1 July 1988
Directive 88/332/EEC
Directive 88/380/EEC1 July 1992 (Article 1(8))
1 July 1990 (other provisions)
Directive 90/654/EEC
Directive 96/72/EC1 July 1997c
Directive 98/95/EC1 February 2000 (Corrigendum, OJ L 126, 20.5.1999, p. 23)
Directive 98/96/EC1 February 2000

ANNEX VIU.K.CORRELATION TABLE

a

98/95/EC, Article 9(2) and 98/96/EC, Article 8(2).

b

98/96/EC, Article 9.

Directive 66/400/EECThis Directive
Article 1Article 1, 1st subparagraph
Article 18Article 1, 2nd subparagraph
Article 1aArticle 2(1)(a)
Article 2(1)(A)Article 2(1)(b)
Article 2(1)(B)(a)Article 2(1)(c)(i)
Article 2(1)(B)(b)Article 2(1)(c)(ii)
Article 2(1)(B)(c)Article 2(1)(c)(iii)
Article 2(1)(B)(d)Article 2(1)(c)(iv)
Article 2(1)(C)(a)Article 2(1)(d)(i)
Article 2(1)(C)(b)Article 2(1)(d)(ii)
Article 2(1)(C)(c)Article 2(1)(d)(iii)
Article 2(1)(C)(d)(i)Article 2(1)(d)(iv), first indent
Article 2(1)(C)(d)(ii)Article 2(1)(d)(iv), second indent
Article 2(1)(D)Article 2(1)(e)
Article 2(1)(E)Article 2(1)(f)
Article 2(1)(F)(a)Article 2(1)(g)(i)
Article 2(1)(F)(b)Article 2(1)(g)(ii)
Article 2(1)(F)(c)Article 2(1)(g)(iii)
Article 2(1)(G), first indentArticle 2(1)(h)(i)
Article 2(1)(G), second indentArticle 2(1)(h)(ii)
Article 2(1a)Article 2(2)
Article 2(2)
Article 2(3)(i)Article 2(3), first subparagraph, (a)
Article 2(3)(i)(a)Article 2(3), first subparagraph, (a)(i)
Article 2(3)(i)(b)Article 2(3), first subparagraph, (a)(ii)
Article 2(3)(i)(c)Article 2(3), first subparagraph, (a)(iii)
Article 2(3)(i)(d)Article 2(3), first subparagraph, (a)(iv)
Article 2(3)(ii)Article 2(3), first subparagraph, (b)
Article 2(3)(iii)Article 2(3), first subparagraph, (c)
Article 2(3)(iv)Article 2(3), first subparagraph, (d)
Article 2(3)(v)Article 2(3), second subparagraph
Article 2(4)Article 2(4)
Article 3Article 3
Article 3aArticle 4
Article 4Article 5
Article 4aArticle 6
Article 5Article 7
Article 6Article 8
Article 7Article 9
Article 9Article 10
Article 10Article 11
Article 11Article 12
Article 11aArticle 13
Article 11bArticle 14
Article 11cArticle 15
Article 12Article 16
Article 12aArticle 17
Article 13Article 18
Article 13aArticle 19
Article 14(1)Article 20
Article 14aArticle 21
Article 15Article 22
Article 16(1)Article 23(1)
Article 16(2)
Article 16(3)Article 23(2)
Article 16(4)
Article 17Article 24
Article 19Article 25
Article 20Article 26
Article 21aArticle 27
Article 21Article 28
Article 22Article 29
Article 22(1)Article 30(1)
Article 22(2)(i)Article 30(2)(a)
Article 22(2)(ii)Article 30(2)(b)
Article 31a
Article 32b
Article 33
Article 34
Article 35
ANNEX I, part A, point (01)ANNEX I, part A, point (1)
ANNEX I, part A, point (1)ANNEX I, part A, point (2)
ANNEX I, part A, point (2)ANNEX I, part A, point (3)
ANNEX I, part A, point (3)ANNEX I, part A, point (4)
ANNEX I, part A, point (4)ANNEX I, part A, point (5)
ANNEX I, part A, point (5)ANNEX I, part A, point (6)
ANNEX I, part B, point (1)ANNEX I, part B, point (1)
ANNEX I, part B, point (2)ANNEX I, part B, point (2)
ANNEX I, part B, point (3)(a)ANNEX I, part B, point (3)(a)
ANNEX I, part B, point (3)(b)(aa)ANNEX I, part B, point (3)(b)(aa)
ANNEX I, part B, point (3)(b)(aa)(a)ANNEX I, part B, point (3)(b)(bb)
ANNEX I, part B, point (3)(b)(bb)ANNEX I, part B, point (3)(b)(cc)
ANNEX I, part B, point (3)(b)(cc)ANNEX I, part B, point (3)(b)(dd)
ANNEX I, part B, point (3)(c)ANNEX I, part B, point (3)(c)
ANNEX IIANNEX II
ANNEX III, part A, point (I)(1)ANNEX III, part A, point (I)(1)
ANNEX III, part A, point (I)(2)ANNEX III, part A, point (I)(2)
ANNEX III, part A, point (I)(3)ANNEX III, part A, point (I)(3)
ANNEX III, part A, point (I)(3a)ANNEX III, part A, point (I)(4)
ANNEX III, part A, point (I)(4)ANNEX III, part A, point (I)(5)
ANNEX III, part A, point (I)(5)ANNEX III, part A, point (I)(6)
ANNEX III, part A, point (I)(6)ANNEX III, part A, point (I)(7)
ANNEX III, part A, point (I)(7)ANNEX III, part A, point (I)(8)
ANNEX III, part A, point (I)(8)ANNEX III, part A, point (I)(9)
ANNEX III, part A, point (I)(9)ANNEX III, part A, point (I)(10)
ANNEX III, part A, point (I)(10)ANNEX III, part A, point (I)(11)
ANNEX III, part A, point (I)(11)ANNEX III, part A, point (I)(12)
ANNEX III, part A, point (I)(12)ANNEX III, part A, point (I)(13)
ANNEX III, part A, point (II)ANNEX III, part A, point (II)
ANNEX III, part BANNEX III, part B
ANNEX IVANNEX IV
ANNEX V
ANNEX VI
(1)

Opinion delivered on 9 April 2002 (not yet published in the Official Journal).

(2)

OJ 125, 11.7.1966, p. 2290/66. Directive as last amended by Directive 98/96/EC (OJ L 25, 1.2.1999, p. 27).

(3)

See Annex V, part A.

(4)

See page 1 of this Official Journal.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources