1. Introductory Text

  2. CHAPTER I GENERAL PROVISIONS

    1. Article 1.Subject matter and scope

    2. Article 2.Definitions

    3. Article 3.Placing on the market and/or putting into service

    4. Article 4.Free movement of equipment

    5. Article 5.Essential requirements

    6. Article 6.Harmonised standards

  3. CHAPTER II APPARATUS

    1. Article 7.Conformity assessment procedure for apparatus

    2. Article 8.‘CE’ marking

    3. Article 9.Other marks and information

    4. Article 10.Safeguards

    5. Article 11.Decisions to withdraw, prohibit or restrict the free movement of apparatus

    6. Article 12.Notified bodies

  4. CHAPTER III FIXED INSTALLATIONS

    1. Article 13.Fixed installations

  5. CHAPTER IV FINAL PROVISIONS

    1. Article 14.Repeal

    2. Article 15.Transitional provisions

    3. Article 16.Transposition

    4. Article 17.Entry into force

    5. Article 18.Addressees

  6. Signature

    1. ANNEX I

      ESSENTIAL REQUIREMENTS REFERRED TO IN ARTICLE 5

      1. 1. Protection requirements

      2. 2. Specific requirements for fixed installations

    2. ANNEX II

      CONFORMITY ASSESSMENT PROCEDURE REFERRED TO IN ARTICLE 7

      1. 1. The manufacturer shall perform an electromagnetic compatibility assessment of the...

      2. 2. The electromagnetic compatibility assessment shall take into account all normal...

      3. 3. In accordance with the provisions set out in Annex IV,...

      4. 4. The manufacturer or his authorised representative in the Community shall...

      5. 5. The compliance of apparatus with all relevant essential requirements shall...

      6. 6. The manufacturer or his authorised representative in the Community shall...

      7. 7. If neither the manufacturer nor his authorised representative is established...

      8. 8. The manufacturer must take all measures necessary to ensure that...

      9. 9. The technical documentation and the EC declaration of conformity shall...

    3. ANNEX III

      CONFORMITY ASSESSMENT PROCEDURE REFERRED TO IN ARTICLE 7

      1. 1. This procedure consists of applying Annex II, completed as follows:...

      2. 2. The manufacturer or his authorised representative in the Community shall...

      3. 3. The notified body shall review the technical documentation and assess...

      4. 4. The manufacturer shall add the statement of the notified body...

    4. ANNEX IV

      TECHNICAL DOCUMENTATION AND EC DECLARATION OF CONFORMITY

      1. 1. Technical documentation

      2. 2. EC declaration of conformity

    5. ANNEX V

      ‘CE’ MARKING REFERRED TO IN ARTICLE 8

      1. The ‘CE’ marking shall consist in the initials ‘CE’ taking...

      2. The ‘CE’ marking must have a height of at least...

      3. The ‘CE’ marking must be affixed to the apparatus or...

      4. Where the apparatus is the subject of other Directives covering...

      5. However, where one or more of those Directives allow the...

    6. ANNEX VI

      CRITERIA FOR THE ASSESSMENT OF THE BODIES TO BE NOTIFIED

      1. 1. The bodies notified by the Member States shall fulfil the...

      2. 2. Fulfilment of the conditions laid down in point 1 shall...

    7. ANNEX VII