- Latest available (Revised)
- Original (As adopted by EU)
Commission Directive 2005/79/EC of 18 November 2005 amending Directive 2002/72/EC relating to plastic materials and articles intended to come into contact with food (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This is the original version (as it was originally adopted).
Annex II to Directive 2002/72/EC is amended as follows:
point 2 of the general introduction is replaced by the following:
salts (including double salts and acid salts) of aluminium, ammonium, calcium, iron, magnesium, potassium and sodium of authorised acids, phenols or alcohols. However, names containing “… acid(s), salts” appear in the lists, if the corresponding free acid(s) is (are) not mentioned;
salts (including double salts and acid salts) of zinc of authorised acids, phenols or alcohols. For these salts a Group SML = 25 mg/kg (expressed as Zn) apply. The same restriction for Zn applies to:
substances whose name contains “… acid(s), salts” which appear in the lists, if the corresponding free acid(s) is (are) not mentioned,
substances referred to in note 38 of Annex VI.’;
section A is amended as follows:
the following lines are inserted in the table in numerical order:
Reference No | CAS No | Name | Restrictions and/or specifications |
---|---|---|---|
(1) | (2) | (3) | (4) |
‘11005 | 012542-30-2 | Acrylic acid, dicyclopentenyl ester | QMA = 0,05 mg/6 dm2 |
11500 | 000103-11-7 | Acrylic acid, 2-ethylhexyl ester | SML = 0,05 mg/kg |
12786 | 000919-30-2 | 3-Aminopropyltriethoxysilane | Residual extractable content of 3-aminopropyltriethoxysilane to be less than 3 mg/kg filler. To be used only for the reactive surface treatment of inorganic fillers |
13317 | 132459-54-2 | N,N′-Bis[4-(ethoxycarbonyl)phenyl]-1,4,5,8-naphthalenetetracarboxydiimide | SML = 0,05 mg/kg. Purity > 98,1 % (w/w). To be used only as co-monomer (max 4 %) for polyesters (PET, PBT) |
14260 | 000502-44-3 | Caprolactone | SML = 0,05 mg/kg (expressed as the sum of caprolactone and 6-hydroxyhexanoic acid) |
16955 | 000096-49-1 | Ethylene carbonate | Residual content = 5 mg/kg of hydrogel at a maximum ratio of 10 g of hydrogel to 1 kg of food. The hydrolysate contains ethyleneglycol having an SML = 30 mg/kg |
21370 | 010595-80-9 | Methacrylic acid, 2-sulphoethyl ester | QMA = ND (DL = 0,02 mg/6 dm2) |
22210 | 000098-83-9 | alpha-Methylstyrene | SML = 0,05 mg/kg |
22932 | 001187-93-5 | Perfluoromethyl perfluorovinyl ether | SML = 0,05 mg/kg. Only to be used for anti-stick coatings |
24903 | 068425-17-2 | Syrups, hydrolysed starch, hydrogenated | In compliance with the specifications laid down in Annex V |
25540 | 000528-44-9 | Trimellitic acid | SML(T) = 5 mg/kg (35) |
25550 | 000552-30-7 | Trimellitic anhydride | SML(T) = 5 mg/kg (35) (expressed as trimellitic acid)’ |
in the following lines the content of the columns ‘CAS No’ or ‘Restrictions and/or specifications’ is replaced by the following:
Reference No | CAS No | Name | Restrictions and/or specifications |
---|---|---|---|
(1) | (2) | (3) | (4) |
‘10690 | 000079-10-7 | Acrylic acid | SML(T) = 6 mg/kg (36) |
10750 | 002495-35-4 | Acrylic acid, benzyl ester | SML(T) = 6 mg/kg (36) |
10780 | 000141-32-2 | Acrylic acid, n-butyl ester | SML(T) = 6 mg/kg (36) |
10810 | 002998-08-5 | Acrylic acid, sec-butyl ester | SML(T) = 6 mg/kg (36) |
10840 | 001663-39-4 | Acrylic acid, tert-butyl ester | SML(T) = 6 mg/kg (36) |
11470 | 000140-88-5 | Acrylic acid, ethyl ester | SML(T) = 6 mg/kg (36) |
11590 | 000106-63-8 | Acrylic acid, isobutyl ester | SML(T) = 6 mg/kg (36) |
11680 | 000689-12-3 | Acrylic acid, isopropyl ester | SML(T) = 6 mg/kg (36) |
11710 | 000096-33-3 | Acrylic acid, methyl ester | SML(T) = 6 mg/kg (36) |
11830 | 000818-61-1 | Acrylic acid, monoester with ethyleneglycol | SML(T) = 6 mg/kg (36) |
11890 | 002499-59-4 | Acrylic acid, n-octyl ester | SML(T) = 6 mg/kg (36) |
11980 | 000925-60-0 | Acrylic acid, propyl ester | SML(T) = 6 mg/kg (36) |
13720 | 000110-63-4 | 1,4-Butanediol | SML(T) = 5 mg/kg (24) |
20020 | 000079-41-4 | Methacrylic acid | SML(T) = 6 mg/kg (37) |
20080 | 002495-37-6 | Methacrylic acid, benzyl ester | SML(T) = 6 mg/kg (37) |
20110 | 000097-88-1 | Methacrylic acid, butyl ester | SML(T) = 6 mg/kg (37) |
20140 | 002998-18-7 | Methacrylic acid, sec-butyl ester | SML(T) = 6 mg/kg (37) |
20170 | 000585-07-9 | Methacrylic acid, tert-butyl ester | SML(T) = 6 mg/kg (37) |
20890 | 000097-63-2 | Methacrylic acid, ethyl ester | SML(T) = 6 mg/kg (37) |
21010 | 000097-86-9 | Methacrylic acid, isobutyl ester | SML(T) = 6 mg/kg (37) |
21100 | 004655-34-9 | Methacrylic acid, isopropyl ester | SML(T) = 6 mg/kg (37) |
21130 | 000080-62-6 | Methacrylic acid, methyl ester | SML(T) = 6 mg/kg (37) |
21190 | 000868-77-9 | Methacrylic acid, monoester with ethyleneglycol | SML(T) = 6 mg/kg (37) |
21280 | 002177-70-0 | Methacrylic acid, phenyl ester | SML(T) = 6 mg/kg (37) |
21340 | 002210-28-8 | Methacrylic acid, propyl ester | SML(T) = 6 mg/kg (37) |
21460 | 000760-93-0 | Methacrylic anhydride | SML(T) = 6 mg/kg (37) |
24190 | 008050-09-7 | Rosin wood | See “Rosin” (Reference No 24100)’ |
the following line is deleted:
Reference No | CAS No | Name | Restrictions and/or specifications |
---|---|---|---|
(1) | (2) | (3) | (4) |
‘11000 | 050976-02-8 | Acrylic acid, dicyclopentadienyl ester | QMA = 0,05 mg/6 dm2’ |
in section B the following lines are deleted:
Reference No | CAS No | Name | Restrictions and/or specifications |
---|---|---|---|
(1) | (2) | (3) | (4) |
‘11500 | 000103-11-7 | Acrylic acid, 2-ethylhexyl ester | |
14260 | 000502-44-3 | Caprolactone | |
21370 | 010595-80-9 | Methacrylic acid, 2-sulphoethyl ester | |
22210 | 000098-83-9 | alpha-Methylstyrene | |
25540 | 000528-44-9 | Trimellitic acid | QM(T) = 5 mg/kg in FP |
25550 | 000552-30-7 | Trimellitic anhydride | QM(T) = 5 mg/kg in FP (expressed as trimellitic acid)’ |
Annex III to Directive 2002/72/EC is amended as follows:
point 2 is replaced by the following:
salts (including double salts and acid salts) of aluminium, ammonium, calcium, iron, magnesium, potassium and sodium of authorised acids, phenols or alcohols. However, names containing “… acid(s), salts” appear in the lists, if the corresponding free acid(s) is (are) not mentioned;
salts (including double salts and acid salts) of zinc of authorised acids, phenols or alcohols. For these salts a Group SML = 25 mg/kg (expressed as Zn) apply. The same restriction for Zn applies to:
substances whose name contains “… acid(s), salts” which appear in the lists, if the corresponding free acid(s) is (are) not mentioned,
substances referred to in note 38 of Annex VI.’;
section A is amended as follows:
the following lines are inserted in numerical order:
Reference No | CAS No | Name | Restrictions and/or specifications |
---|---|---|---|
(1) | (2) | (3) | (4) |
‘30340 | 330198-91-9 | 12-(Acetoxy)stearic acid, 2,3-bis(acetoxy)propyl ester | |
30401 | — | Acetylated mono- and diglycerides of fatty acids | |
31542 | 174254-23-0 | Acrylic acid, methyl ester, telomer with 1-dodecanethiol, C16-C18 alkyl esters | QM = 0,5 % (w/w) in FP |
43480 | 064365-11-3 | Charcoal, activated | In compliance with the specifications laid down in Annex V, Part B |
62245 | 012751-22-3 | Iron phosphide | For PET polymers and copolymers only |
64990 | 025736-61-2 | Maleic anhydride-styrene, copolymer, sodium salt | In compliance with specifications laid down in Annex V |
66905 | 000872-50-4 | N-Methylpyrrolidone | |
66930 | 068554-70-1 | Methylsilsesquioxane | Residual monomer in methylsilsesquioxane: < 1 mg methyltrimethoxysilane/kg of methylsilsesquioxane |
67155 | — | Mixture of 4-(2-Benzoxazolyl)-4′-(5-methyl-2-benzoxazolyl)stilbene, 4,4′-bis(2-benzoxazolyl) stilbene and 4,4′-bis(5-methyl-2-benzoxazolyl)stilbene) | Not more than 0,05 % w/w (quantity of substance used/quantity of the formulation). In compliance with the specifications laid down in Annex V |
76415 | 019455-79-9 | Pimelic acid, calcium salt | |
76815 | — | Polyester of adipic acid with glycerol or pentaerythritol, esters with even numbered, unbranched C12-C22 fatty acids | In compliance with the specifications laid down in Annex V |
76845 | 031831-53-5 | Polyester of 1,4-butanediol with caprolactone | In compliance with the specifications laid down in Annex V |
77370 | 070142-34-6 | Polyethyleneglycol-30 dipolyhydroxystearate | |
79600 | 009046-01-9 | Polyethyleneglycol tridecyl ether phosphate | SML = 5 mg/kg. For materials and articles intended for contact with aqueous foods only. In compliance with the specification laid down in Annex V |
80000 | 009002-88-4 | Polyethylene wax | |
81060 | 009003-07-0 | Polypropylene wax’ |
in the following lines the content of the columns ‘Name’ and ‘Restrictions and/or specifications’ is replaced by the following:
Reference No | CAS No | Name | Restrictions and/or specifications |
---|---|---|---|
(1) | (2) | (3) | (4) |
‘30080 | 004180-12-5 | Acetic acid, copper salt | SML(T) = 5 mg/kg (7) (expressed as Copper) |
35760 | 001309-64-4 | Antimony trioxide | SML = 0,04 mg/kg (39) (expressed as Antimony) |
40580 | 000110-63-4 | 1,4-Butanediol | SML(T) = 5 mg/kg (24) |
42320 | 007492-68-4 | Carbonic acid, copper salt | SML(T) = 5 mg/kg (7) (expressed as Copper) |
45195 | 007787-70-4 | Copper bromide | SML(T) = 5 mg/kg (7) (expressed as Copper) |
45200 | 001335-23-5 | Copper iodide | SML(T) = 5 mg/kg (7) (expressed as Copper) |
53610 | 054453-03-1 | Ethylenediaminetetraacetic acid, copper salt | SML(T) = 5 mg/kg (7) (expressed as Copper) |
81515 | 087189-25-1 | Poly(zinc glycerolate) | SML(T) = 25 mg/kg (38) (as Zinc) |
81760 | — | Powders, flakes and fibers of brass, bronze, copper, stainless steel, tin and alloys of copper, tin and iron | SML(T) = 5 mg/kg (7) (expressed as Copper) |
88640 | 008013-07-08 | Soybean oil, epoxidised | SML = 60 mg/kg. However in the case of PVC gaskets used to seal glass jars containing infant formulae and follow-on formulae as defined by Commission Directive 91/321/EEC or containing processed cereal-based foods and baby foods for infants and young children as defined by Directive 96/5/EC, the SML is lowered to 30 mg/kg |
89200 | 007617-31-4 | Stearic acid, copper salt | SML(T) = 5 mg/kg (7) (expressed as Copper) |
92030 | 010124-44-4 | Sulphuric acid, copper salt | SML(T) = 5 mg/kg (7) (expressed as Copper) |
96190 | 020427-58-1 | Zinc hydroxide | SML(T) = 25 mg/kg (38) (as Zinc) |
96240 | 001314-13-2 | Zinc oxide | SML(T) = 25 mg/kg (38) (as Zinc) |
96320 | 001314-98-3 | Zinc sulphide | SML(T) = 25 mg/kg (38) (as Zinc)’ |
the following lines are deleted:
Reference No | CAS No | Name | Restrictions and/or specifications |
---|---|---|---|
(1) | (2) | (3) | (4) |
‘30400 | — | Acetylated glycerides | |
38320 | 005242-49-9 | 4-(2-Benzoxazolyl)-4′-(5-methyl-2-benzoxazolyl)stilbene | In compliance with the specifications laid down in Annex V’ |
section B is amended as follows:
the following lines are inserted in numerical order:
Reference No | CAS No | Name | Restrictions and/or specifications |
---|---|---|---|
(1) | (2) | (3) | (4) |
‘31500 | 025134-51-4 | Acrylic acid, acrylic acid, 2-ethylhexyl ester, copolymer | SML(T) = 6 mg/kg (36) (expressed as acrylic acid) and SML = 0,05 mg/kg (expressed as acrylic acid, 2-ethylhexyl ester) |
38505 | 351870-33-2 | cis-endo-Bicyclo[2.2.1]heptane-2,3-dicarboxylic acid, disodium salt | SML = 5 mg/kg. Not to be used with polyethylene in contact with acidic foods. Purity ≥ 96 % |
38940 | 110675-26-8 | 2,4-Bis(dodecylthiomethyl)-6-methylphenol | SML(T) = 5 mg/kg (40) |
49595 | 057583-35-4 | Dimethyltin bis(ethylhexyl mercaptoacetate) | SML(T) = 0,18 mg/kg (16) (expressed as Tin) |
63940 | 008062-15-5 | Lignosulphonic acid | SML = 0,24 mg/kg and to be used only as dispersant for plastics dispersions |
66350 | 085209-93-4 | 2,2′-Methylenebis(4,6-di-tert-butylphenyl) lithium phosphate | SML = 5 mg/kg and SML(T) = 0,6 (8) (expressed as Lithium) |
67515 | 057583-34-3 | Monomethyltin tris(ethylhexyl mercaptoacetate) | SML(T) = 0,18 mg/kg (16) (expressed as Tin) |
69160 | 014666-94-5 | Oleic acid, cobalt salt | SML(T) = 0,05 mg/kg (14) (expressed as Cobalt) |
76681 | — | Polycyclopentadiene, hydrogenated | SML = 5 mg/kg (1) |
85950 | 037296-97-2 | Silicic acid, magnesium-sodium-fluoride salt | SML = 0,15 mg/kg (expressed as fluoride). Only to be used in layers of multilayers materials not coming into direct contact with food |
95265 | 227099-60-7 | 1,3,5-Tris(4-benzoylphenyl) benzene | SML = 0,05 mg/kg’ |
in the following lines the content of the columns ‘Name’ and ‘Restrictions and/or specifications’ is replaced by the following:
Reference No | CAS No | Name | Restrictions and/or specifications |
---|---|---|---|
(1) | (2) | (3) | (4) |
‘40020 | 110553-27-0 | 2,4-Bis(octylthiomethyl)-6-methylphenol | SML(T) = 5 mg/kg (40) |
50160 | — | Di-n-octyltin bis(n-alkyl(C10-C16) mercaptoacetate) | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
50240 | 010039-33-5 | Di-n-octyltin bis(2-ethylhexyl maleate) | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
50320 | 015571-58-1 | Di-n-octyltin bis(2-ethylhexyl mercaptoacetate) | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
50360 | — | Di-n-octyltin bis(ethyl maleate) | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
50400 | 033568-99-9 | Di-n-octyltin bis(isooctyl maleate) | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
50480 | 026401-97-8 | Di-n-octyltin bis(isooctyl mercaptoacetate) | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
50560 | — | Di-n-octyltin 1,4-butanediol bis(mercaptoacetate) | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
50640 | 003648-18-8 | Di-n-octyltin dilaurate | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
50720 | 015571-60-5 | Di-n-octyltin dimaleate | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
50800 | — | Di-n-octyltin dimaleate, esterified | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
50880 | — | Di-n-octyltin dimaleate, polymers (n = 2-4) | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
50960 | 069226-44-4 | Di-n-octyltin ethyleneglycol bis(mercaptoacetate) | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
51040 | 015535-79-2 | Di-n-octyltin mercaptoacetate | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
51120 | — | Di-n-octyltin thiobenzoate 2-ethylhexyl mercaptoacetate | SML(T) = 0,006 mg/kg (17) (expressed as Tin) |
67180 | — | Mixture of (50 % w/w) phthalic acid n-decyl n-octyl ester, (25 % w/w) phthalic acid di-n-decyl ester, (25 % w/w) phthalic acid di-n-octyl ester | SML = 5 mg/kg (1)’ |
The following line is deleted:
Reference No | CAS No | Name | Restrictions and/or specifications |
---|---|---|---|
(1) | (2) | (3) | (4) |
‘76680 | 068132-00-3 | Polycyclopentadiene, hydrogenated | SML = 5 mg/kg (1)’ |
In Part B of Annex V, the following lines are inserted in numerical order:
Reference No | OTHER SPECIFICATIONS |
---|---|
‘24903 | Syrups, hydrolysed starch, hydrogenated In compliance with the purity criteria for maltitol syrup E 965(ii) (Commission Directive 95/31/EC (OJ L 178, 28.7.1995, p. 1) as last amended by 2004/46/EC (OJ L 114, 21.04.2004, p. 15)) |
43480 | Charcoal, activated To be used only in PET at maximum 10 mg/kg of polymer. Same purity requirements as for Vegetable Carbon (E 153) set out by Commission Directive 95/45/EC ((OJ L 226, 22.9.1995, p. 1). Directive as last amended by Directive 2004/47/EC (OJ L 113, 20.4.2004, p. 24)) with exception of ash content which can be up to 10 % (w/w). |
64990 | Maleic anhydride-styrene, copolymer, sodium salt MW fraction < 1 000 is less than 0,05 % (w/w) |
67155 | Mixture of 4-(2-Benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene, 4,4'-bis(2-benzoxazolyl) stilbene and 4,4'-bis(5-methyl-2-benzoxazolyl)stilbene Mixture obtained from the manufacturing process in the typical ratio of (58-62 %):(23-27 %): (13-17 %). |
76845 | Polyester of 1,4-butanediol with caprolactone MW fraction < 1 000 is less than 0,05 % (w/w) |
76815 | Polyester of adipic acid with glycerol or pentaerythritol, esters with even numbered, unbranched C12-C22 fatty acids MW fraction < 1 000 is less than 5 % (w/w) |
79600 | Polyethyleneglycol tridecyl ether phosphate Polyethyleneglycol (EO ≤ 11) tridecyl ether phosphate (mono-and dialkyl ester) with a maximum 10 % content of polyethyleneglycol (EO ≤ 11) tridecylether’ |
Annex VI is amended as follows:
the notes (8), (14) and (16) are replaced by the following:
the following notes are added:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: