Directive 2008/121/EC of the European Parliament and of the Council (repealed)Show full title

Article 9 U.K.

1. Any textile product composed of two or more components which have different fibre contents shall bear a label stating the fibre content of each component. Such labelling shall not be compulsory for components representing less than 30 % of the total weight of the product, excluding main linings.

2. Where two or more textile products have the same fibre content and normally form a single unit, they need bear only one label.

3. Without prejudice to Article 12:

(a) the fibre composition of the following corsetry articles shall be indicated by stating the composition of the whole product or that of the components listed below either inclusively or separately:

(i)

for brassières: the outside and inside fabric of the cups and back;

(ii)

for corsets: the front, rear and side stiffening panels;

(iii)

for corselets: the outside and inside fabric of the cups, the front and rear stiffening panels and the side panels.

The fibre composition of corsetry articles other than those listed in the first subparagraph shall be indicated by stating the composition of the whole product or, either inclusively or separately, the composition of the various components of the articles; such labelling shall not be compulsory for components representing less than 10 % of the total weight of the product.

The separate labelling of the various parts of the said corsetry articles shall be carried out in such a way that the end consumer can easily understand to which part of the product the particulars on the label refer;

(b) the fibre composition of etch-printed textiles shall be given for the product as a whole and may be indicated by stating, separately, the composition of the base fabric and that of the etched parts. These components must be mentioned by name;

(c) the fibre composition of embroidered textiles shall be given for the product as a whole and may be indicated by stating, separately, the composition of the base fabric and that of the embroidery yarn; these components must be mentioned by name; if the embroidered parts amount to less than 10 % of the surface area of the product, only the composition of the base fabric need be stated;

(d) the fibre composition of yarns consisting of a core and a cover made up of different fibres, and offered for sale as such to the consumer, shall be given for the product as a whole and may be indicated by stating the composition of the core and the cover separately; these components must be mentioned by name;

(e) the fibre composition of velvet and plush textiles, or of textiles resembling velvet or plush, shall be given for the whole product and, where the product comprises a distinct backing and a use-surface composed of different fibres, may be stated separately for these two parts, which must be mentioned by name;

(f) the composition of floor coverings and carpets of which the backing and the use-surface are composed of different fibres may be stated for the use-surface alone, which must be mentioned by name.